Bilt Hamber Phat-Neut pH-Neutral Rinseless Wash ConcentrateBilt Hamber Phat-Neut is a newly developed, pH-neutral cleaning concentrate that pushes the limits of traditional rinseless wash products. While many rinseless washes are primarily designed for gentle car washing with minimal water, Phat-Neut takes a different route: It is specially formulated to effectively break down real-world road grime like traffic film, tire residue, brake dust, insect remains, and other stubborn contaminants without relying on harsh alkalinity, solvents, or aggressive chemicals.pH-neutral cleaning technologySafe for paint, wraps, plastics, glass, rims, and coatingsDesigned to remove authentic traffic filmLift-Mode® technology for dirt encapsulation and liftingVersatile applications with one productCompatible with waxed, sealed, and ceramic coated vehiclesThe core innovation is the Lift-Mode® technology developed by Bilt Hamber. Unlike traditional cleaners that often rely on high alkalinity or aggressive chemicals to attack dirt, Phat-Neut targets a precise wetting and encapsulation of dirt particles. Contaminants are safely separated from the surface and suspended in the cleaning solution, reducing the risk of wash scratches while delivering outstanding cleaning performance.More Than Just a Classic Rinseless WashThe term “rinseless wash” only describes part of Phat-Neut’s actual range. This concentrate covers multiple cleaning tasks far beyond many traditional products in this category.Rinseless Wash: Water-efficient vehicle washing with high lubricity and secure dirt pickup.Pre-Wash: Pre-cleaner for heavily soiled vehicles before the main wash.Dry-On Mode®: Special application for heavy grime where cleaning power intensifies during drying.Wheel Cleaning: For heavily contaminated rims and vehicle parts.Spot Cleaning: Targeted removal of insect remains, bird droppings, and localized dirt.The unique Dry-On Mode® is especially noteworthy. While most car cleaners require avoiding drying on the surface, Phat-Neut uses the evaporation process under certain conditions to enhance cleaning performance further. This weakens the bond between grime and surface, making it exceptionally versatile under warm temperatures and tough dirt scenarios.Clear Differentiation from Classic Rinseless and Detailer ConcentratesPhat-Neut should not be confused with classic-generation rinseless concentrates like Optimum No Rinse (ONR). Such products are often used not only as rinseless washes but also as detailer concentrates, clay lubricant, or quick mid-level maintenance sprays.Bilt Hamber Phat-Neut focuses clearly on vehicle cleaning. The product isn’t designed as a detailer concentrate and shouldn’t be treated primarily as one. Instead of boosting gloss, polymer layers, or detailer effects, the formula emphasizes safe, effective removal of real-world exterior grime. This positions Phat-Neut closer to an advanced pH-neutral cleaning system than a classic quick-detailer concentrate.For users seeking maximum cleaning power combined with high material safety, Phat-Neut is a compelling alternative to traditional rinseless formulas. Its pH-neutral base, strong dirt dissolution, broad versatility, and innovative Lift-Mode® technology make it one of the most technically interesting products in modern low-water car washing.

Gtechniq GT1 Ceramic Coating Set – The Allround Ceramic Shield for Almost All Vehicle Surfaces What was barely imaginable a few years ago is now reality: with the Gtechniq GT1 Ceramic Coating Set, there's now a thoughtfully designed complete kit for ceramic coating of nearly every exterior vehicle surface. Instead of using different products for paint, plastic, glass or paint protection films, GT1 covers almost all relevant surfaces. This makes application easier than ever and offers both beginners and pro detailers a hassle-free entry into modern ceramic coating. Complete kit for ceramic coating of almost all exterior surfaces Suitable for paint, plastic, paint protection film (PPF), glass and wheels Simple single-layer application without complicated steps Also suitable for outdoor use Up to 12 months long-lasting protection Perfect as an allround ceramic shield for beginners and enthusiasts Includes panel wipe, microfiber cloths, applicator, gloves and instructions One Ceramic Coating for Almost Every Surface GT1 Ceramic Coating is engineered to significantly reduce detailing effort. Its innovative formula adheres reliably to paint, plastic parts, paint protection films (PPF), glass and wheels, creating a durable protective layer against environmental damage, UV rays, dirt and water. Thanks to its universal use, just one product is enough to permanently protect nearly the entire vehicle. Saves time, simplifies product choice and ensures a uniform finish on all treated surfaces. Easy Application with Professional Results Gtechniq GT1 bridges the gap between classic paint sealants and professional high-end ceramic coatings. The single-layer application is designed simple and requires no special tools or controlled environment. Even ambitious beginners can achieve top-tier results with this complete kit. After thorough prep, the coating is evenly applied, forming a smooth, water-repellent surface with impressive chemical and weather resistance. The Complete Ceramic Coating Set for Immediate Use The set includes everything needed for application. Besides the 50 ml GT1 ceramic coating, it contains a 100 ml panel wipe for optimal surface prep, an AP5 microfiber applicator, several premium microfiber towels, protective gloves and detailed instructions. So you can start sealing right after prepping your vehicle—no extra accessories required. The Ideal Allround Ceramic Coating for Modern Car Care Whether a new car, daily driver or lovingly cared-for enthusiast vehicle, the Gtechniq GT1 Ceramic Coating Set offers an exceptionally versatile solution for long-term vehicle protection. Combining easy application, universal surface compatibility and durable protection, GT1 is a modern allround ceramic coating that makes getting into premium ceramic finishes easier than ever. A complete set that meets nearly all demands of contemporary vehicle sealing.

Detail Passion 20L Car Wash Set Clean and SealThe Detail Passion 20L Car Wash Set Clean and Seal offers a perfectly coordinated all-in-one package for thorough yet paint-friendly vehicle washing. In collaboration with Auto Graph and Detail Passion, we present this premium wash set with an attractive 20% discount. The set combines powerful cleaning agents, premium wash tools, and professional drying solutions for a brilliant, sealed finish.Detail Passion black bucket stickerWhite Grit Guard bucket insertMagic Bucket 5 US gallon / approx. 20-liter wash bucket whiteMagic Bucket lid with click functionDetail Passion Creamy Wash pad with wrist strap ocean blueDetail Passion SnowCloud Dry Towel 1500 GSMDetail Passion Baby TigerShark V2 microfiber towel seablue 30x30 cmAUTO GRAPH TOURMALINE pH-neutral car shampoo Foam Blue 400mlAUTO GRAPH CARNELIAN Snow Foam cleaner 400mlAUTO GRAPH TOPAZ Bug Remover 400mlAUTO GRAPH CORALITE Quick Detailer 400mlDetail Passion 2Face+ microfiber cloth mintDetail Passion rubberized wheel brush Ø 29mmMarolex Ergo Alka pressure sprayer 1000How to UseStart with a pre-cleaning using the Marolex pressure sprayer filled with AUTO GRAPH Carnelian mixed 1:10. Spray heavily soiled areas like front, sills, rear, and wheels thoroughly. The active foam breaks down dirt, grease, and deposits, allowing gentle rinsing with a high-pressure washer.For stubborn insect residues, treat affected spots during pre-wash with AUTO GRAPH Topaz. Spray, let sit briefly, then rinse off. This safely removes bugs without mechanical paint damage.Next is the hand wash: fill the bucket with water and add AUTO GRAPH Tourmaline Shampoo. Its pH-neutral formula cleans effectively while protecting wax or sealants. Wash your vehicle top-down in straight lines with the Detail Passion Creamy Wash Pad. The Grit Guard keeps dirt at the bucket's bottom, preventing scratches.After thorough rinsing, dry the car using the super-absorbent Detail Passion SnowCloud Dry Towel. The compact Baby TigerShark is perfect for tight spots like mirrors, badges, or door gaps.Finish strong with AUTO GRAPH Coralite Quick Detailer. Spray onto slightly damp or dry paint and buff out with the 2Face+ microfiber cloth. Coralite delivers deep shine, a silky smooth surface, and an impressive hydrophobic sealing effect.Wheels also get pro treatment: pre-clean with Carnelian, hand-wash with Tourmaline. Use the chemical-resistant, rubberized Detail Passion wheel brush to reach tight gaps with ease.The result: a clean, glossy, and protected vehicle—with minimal risk of wash scratches and maximum care effect.

Detail Passion Wheel Brush Set – 3 Premium Brushes at a Great Price The Detail Passion Wheel Brush Set combines three popular rubberized cleaning brushes in one convenient value pack. Included are brush sizes 15 mm, 21 mm, and 29 mm – perfectly tailored for precise cleaning tasks both inside and outside your vehicle. From delicate air vents to deep wheel wells, this set offers the right brush for almost every detailing job. Complete set with 3 wheel and detailing brushes Sizes: 15 mm, 21 mm, 29 mm Value price vs buying individually Ideal for interior and exterior cleaning Rubberized handles for secure grip Paint-friendly, chemical-resistant bristles Perfect for wheels, emblems, vents, dashboards, and fine details Three Sizes for Ultimate Flexibility The three different brush sizes allow for thorough cleaning of tight gaps as well as larger surfaces. The 15 mm brush is perfect for delicate areas like emblems, trim, air vents, or switches. The 21 mm brush is a versatile all-rounder for interiors, wheels, and plastic parts. The large 29 mm brush excels at broad tasks like wheel wells, lug nuts, grilles, and door jambs. Ideal for Inside and Outside Vehicle Care Whether deep cleaning wheels, removing dust from the cockpit, or detailing emblems and crevices – the Detail Passion brush set is the perfect addition to any car care toolkit. The durable yet gentle bristles ensure effective cleaning without damaging sensitive surfaces. More Cleaning Power at a Great Price With the Detail Passion 3-Piece Brush Set, you get all essential sizes in one package while saving money with a great set price. Perfect for beginners, enthusiasts, and professional detailers who want to clean without compromise.

Detail Passion 2Face+ Microfiber Towel mint The Detail Passion 2Face+ Microfiber Towel mint is an ultra-soft premium microfiber cloth perfect for versatile cleaning and care tasks on vehicles. Its supersoft fiber structure and special 2Face+ weave make it ideal for delicate surfaces both inside and outside your car. Available individually or as a 3-piece value set, it's a must-have for demanding car care enthusiasts. Available as a single cloth or 3-piece value set Ultrasoft multipurpose microfiber towel Special 2Face+ weave with reduced surface friction Dimensions: 40 x 40 cm Weight: 310 GSM Gentle on delicate surfaces Perfect for interior, leather, faux leather, and piano gloss High dirt absorption with smooth glide Premium quality for professional car care Special 2Face+ Weave for Maximum Gentle Care The unique 2Face+ structure significantly reduces friction between cloth and surface. This allows the microfiber towel to glide gently over sensitive materials, minimizing the risk of micro-scratches or abrasion marks. It’s especially beneficial on delicate surfaces like piano gloss, screens, soft-touch plastics, and leather, outperforming standard microfiber towels. Perfect for Interior, Leather and Faux Leather The Detail Passion 2Face+ was developed for areas requiring maximum material care. Ideal for cleaning and wiping down dashboards, displays, leather, faux leather, door panels, and delicate interior surfaces. It also offers versatility for general vehicle cleaning tasks. Available Individually or in 3-Pack Set Whether as a standalone premium towel or in the handy 3-pack value set, the Detail Passion 2Face+ mint microfiber cloth delivers top quality for enthusiasts and pros alike. The set is perfect for keeping dedicated towels for different zones such as interior, leather, and finishing.

Ceramic Buff Splitted Light by Detail Passion is the affordable 250 GSM version of the proven Ceramic Buff Splitted, specially designed as a leveling and polishing cloth for ceramic coatings. The fine, soft microfiber reliably absorbs excess coating for a clean, controlled finish. At almost half the price of the standard version, Ceramic Buff Splitted Light is an especially economical coating cloth for professional detailers and passionate enthusiasts with high cloth consumption.Affordable leveling and coating cloth with 250 GSMPerfect for leveling and polishing ceramic coatingsAlmost half the price of the Ceramic Buff Splitted standard version70% polyester and 30% polyamideIdeal for easy-to-work-with ceramic coatingsSoft microfiber for a clean and even paint finishLeveling Cloth for Ceramic CoatingsWith 250 GSM, Ceramic Buff Splitted Light is lighter than the standard version and especially suitable for ceramic coatings that are comparatively easy to polish and level. Examples include NORDIC Graphene 60, Gtechniq GT1, and LUMINUS SP Graphene. During leveling, the microfiber cloth absorbs excess ceramic coating from the paint surface in a controlled way, helping to avoid high spots, streaks, and excess coating. It can also be used for the final buff off to achieve a clear, even paint finish.Ceramic Buff Splitted Light with 250 GSMThis high-quality microfiber consists of 70% polyester and 30% polyamide, combining a pleasantly soft surface with good absorption capacity. Thanks to its lower fabric weight, Ceramic Buff Splitted Light is an affordable option for easily applied ceramic coatings and wherever multiple fresh cloths are needed during coating. Especially on larger vehicles or in professional use, the nearly halved price compared to the standard version quickly pays off.Light or Standard Ceramic Buff Splitted?Ceramic Buff Splitted Light is designed for economical processing of coatings and ceramic sealants. For removing polishes and especially oily residues, we still recommend the regular Detail Passion Ceramic Buff Splitted. Its higher material density and stronger absorption make the standard version the better choice for those tasks. If you’re looking for a cost-effective leveling, coating, or polishing cloth for ceramic coatings, Ceramic Buff Splitted Light offers an efficient alternative.

Ceramic Buff Splitted Light by Detail Passion is the budget-friendly 250 GSM version of the proven Ceramic Buff Splitted, designed specifically as a leveling and polishing cloth for ceramic coatings. The fine, soft microfiber reliably removes excess coating, delivering a clean, controlled finish. Priced at nearly half of the standard version, Ceramic Buff Splitted Light is a highly economical coating cloth for professional detailers and enthusiasts with high cloth consumption. Affordable leveling and coating cloth with 250 GSM Perfect for leveling and polishing ceramic coatings Almost half the price of the Ceramic Buff Splitted standard version 70% polyester and 30% polyamide Ideal for easy-to-apply ceramic coatings Soft microfiber for a clean and even paint finish Leveling Cloth for Ceramic Coatings and Sealants With 250 GSM, Ceramic Buff Splitted Light is lighter than the standard version, making it especially suitable for ceramic coatings that are easier to polish and level, such as NORDIC Graphene 60, Gtechniq GT1, and LUMINUS SP Graphene. When leveling, the microfiber cloth absorbs excess ceramic coating from the paint surface in a controlled way, helping to avoid high spots, streaks, and surplus coating. It can also be used for the final buff off to achieve a clear, uniform paint finish. Ceramic Buff Splitted Light with 250 GSM This premium microfiber is made of 70% polyester and 30% polyamide combining a soft feel with good absorbency. Thanks to the lower weight, Ceramic Buff Splitted Light is an affordable alternative for straightforward ceramic coatings and situations requiring multiple fresh cloths, such as large vehicles or professional use. The price difference to the standard version pays off quickly in such scenarios. Light or Standard Ceramic Buff Splitted? Ceramic Buff Splitted Light is optimized for cost-effective application of coatings and ceramic sealants. For removing polishes and oily residues, we recommend the regular Detail Passion Ceramic Buff Splitted. Its higher material density and stronger absorption make it the better choice. However, if you need a budget-friendly leveling cloth, coating cloth, or polishing cloth for ceramic sealants, Ceramic Buff Splitted Light offers a cost-efficient alternative.

Ceramic Buff Splitted Light by Detail Passion is the budget-friendly 250 GSM version of the proven Ceramic Buff Splitted, specially designed as a leveling and polishing cloth for ceramic coatings. The fine, soft microfiber reliably absorbs excess coating, enabling a clean, controlled finish. Priced at nearly half the cost of the standard version, Ceramic Buff Splitted Light is an especially economical coating cloth for professional detailers and passionate enthusiasts with high towel usage.Affordable leveling and coating cloth with 250 GSMPerfect for leveling and polishing ceramic coatingsAlmost half the price of the standard Ceramic Buff Splitted versionMade of 70% polyester and 30% polyamideIdeal for easy-to-apply ceramic coatingsSoft microfiber for a clean, even paint finishLeveling Cloth for Ceramic Coatings and SealantsAt 250 GSM, Ceramic Buff Splitted Light is lighter than the standard version and especially suited for ceramic coatings that are relatively easy to polish and level. These include products like NORDIC Graphene 60, Gtechniq GT1, and LUMINUS SP Graphene. During leveling, the microfiber cloth absorbs excess ceramic coating from the paint surface in a controlled manner, helping to avoid high spots, streaks, and excess product. It can also be used for the final buff off to achieve a clear, uniform paint finish.Ceramic Buff Splitted Light with 250 GSMThis high-quality microfiber consists of 70% polyester and 30% polyamide, combining a pleasantly soft surface with excellent absorbency. Due to its lighter weight, Ceramic Buff Splitted Light offers an affordable alternative for easy-to-use ceramic coatings and situations where multiple fresh cloths are needed during coating application. Especially for larger vehicles or professional use, the nearly halved price compared to the standard version pays off quickly.Light or Standard Ceramic Buff Splitted?Ceramic Buff Splitted Light is designed for cost-effective processing of coatings and ceramic sealants. For removing polish residues and especially oily deposits, we still recommend the regular Detail Passion Ceramic Buff Splitted. Its higher material density and greater absorbency make the standard version the better choice for these uses. However, if you’re looking for an affordable leveling, coating, or polishing cloth for ceramic coatings, Ceramic Buff Splitted Light offers a cost-effective alternative.

Detail Passion Creamy Wash Pad with Wrist Strap The Detail Passion Creamy Wash Pad is crafted for an especially thorough, comfortable, and paint-friendly car wash. Its premium fiber design soaks up a massive amount of shampoo water and securely holds it inside the pad. Gentle pressing or squeezing releases the shampoo water in a controlled way, instantly creating rich foam. This dense foam layer boosts glide on the paint, helping to gently lift dirt off the surface without scratches. Available in striking neon green and ocean blue. Massive absorption for water and car shampoo High foam generation with gentle pressing or squeezing Ultra-light base fiber for smooth, controlled handling Long, soft fibers for a gentle car wash Safe on emblems, edges, creases, and trim Practical wrist strap for extra grip Available in neon green and ocean blue Perfect as a premium wash pad or alternative to wash mitts Exceptional Shampoo Water Absorption and Rich Foam One of the top strengths of the Detail Passion Creamy Wash Pad is its outstanding absorption capacity. The pad soaks up your prepared wash solution deeply, maintaining a large amount of water and shampoo right at the paint’s surface. A light press releases fresh shampoo water, while a firmer squeeze produces a thick foam layer that spreads evenly over the paint. This keeps the surface perfectly wet during washing while the pad glides smoothly and evenly across the car. Feather-light Base Fiber with Long, Soft Fibers This pad combines an ultra-light base fiber with long, soft washing fibers. Despite its huge shampoo water capacity, the Creamy Wash Pad remains easy to control, requiring no unnecessary force when used on hoods, roofs, doors, and side panels. The long fibers gently envelop dirt and transport it away from delicate paintwork. They’re flexible enough to adapt to contours and tricky car areas safely. The pad also excels on emblems, lettering, edges, creases, and trim with a high level of application safety. The fibers are fluffy yet lightweight and flexible to avoid snagging on delicate details. This makes the pad ideal for both large paint surfaces and detailed zones. Secure Handling Thanks to the Practical Wrist Strap The built-in wrist strap provides extra grip throughout the entire washing process. When fully soaked, pads can easily slip from your hand. The strap minimizes this risk and prevents accidental drops that could pick up sand or coarse dirt from the ground. This combination of premium fibers and secure handling makes the Creamy Wash Pad stand out. The Perfect Blend of Wash Pad and Wash Mitt The Detail Passion Creamy Wash Pad offers the best of both worlds: the precise control of a traditional wash pad, the high absorbency of a quality wash mitt, and the extra security of a wrist strap. It fits comfortably in your hand, allowing flexible rotation and precise movement over different car parts. Its exceptional shampoo water retention ensures rich foaming and consistent supply of fresh wash solution to the paint. This makes Creamy Wash the ideal choice for passionate car care enthusiasts and pros seeking a premium, safe, and ultra-absorbent wash pad.

Detail Passion Creamy Wash Wash Pad with Wrist LoopThe Detail Passion Creamy Wash Wash Pad is crafted for an exceptionally thorough, comfortable, and paint-safe car wash. Its premium fiber structure absorbs an immense amount of shampoo water, reliably holding it inside the pad. Light pressing or squeezing releases the shampoo water in a controlled way, instantly creating a rich foam. This dense foam improves glide on the paint and helps gently lift away dirt without harming the surface. Available in striking neon green and ocean blue colors.Extremely high water and shampoo absorptionIntense foam generation by gentle pressing or squeezingUltra-light base fiber for easy, controlled handlingLong, soft fibers for especially gentle car washingSafe on emblems, edges, seams, and trimsPractical wrist loop for extra gripAvailable in neon green and ocean bluePerfect high-quality wash pad and alternative to wash mittsMassive Shampoo Water Absorption with Intense Foam BoostA key strength of the Detail Passion Creamy Wash Pad is its outstanding absorption capacity. It soaks up the prepared wash solution deeply, keeping a large amount of water and shampoo ready at the vehicle surface. Light pressing releases fresh shampoo water, and firmer squeezing produces a thick foam that can be evenly spread over the paint. This keeps the surface optimally lubricated while the pad glides smoothly and evenly across the paintwork.Ultra-Light Base Fiber with Long, Soft FibersThe pad combines a very lightweight base fiber with long, exceptionally soft washing fibers. Despite its high shampoo water uptake, the Creamy Wash pad remains easy to control without unnecessary force, gliding effortlessly over hoods, roofs, doors, and side panels. The long fibers encapsulate dirt particles and lift them away from the sensitive paint surface, while flexibly adapting to contours and intricate vehicle areas.Its safe use on emblems, lettering, edges, seams, and trims is ensured by the soft, fluffy fibers that don’t snag on delicate details. This makes the wash pad perfect for large paint surfaces and demanding detail zones alike.Secure Grip Thanks to the Practical Wrist LoopThe integrated wrist loop adds extra grip throughout the entire wash process. When fully soaked, wash pads can easily slip out of your hand. The loop greatly reduces this risk, preventing the pad from falling to the floor where it could pick up sand or coarse dirt particles. The Creamy Wash pad merges premium fiber quality with secure, comfortable handling.The Perfect Blend Between Wash Pad and Wash MittThe Detail Passion Creamy Wash pad offers the perfect combo of precise control from a classic wash pad, high absorbency like a premium wash mitt, and added security from a wrist loop. It lies freely in the hand, allowing flexible rotation and precise targeting of various vehicle areas. Its massive shampoo water absorption ensures dense foam buildup and consistent lubrication of the paint. The Creamy Wash is the ideal pick for detail-minded car care enthusiasts and pros who demand a high-quality, secure, and ultra-absorbent wash pad.

AUTO GRAPH TOURMALINE – pH-Neutral Car Shampoo for Gentle WashAUTO GRAPH TOURMALINE is a highly concentrated, pH-neutral car shampoo designed for thorough yet gentle vehicle cleaning. Perfect for regular hand washes after pre-cleaning removes heavy dirt, road grime, and loose contaminants.pH-neutral car shampooIdeal for regular, gentle hand washingCompatible with waxes, spray sealants, and ceramic coatingsSuitable for foam cannonsAvailable in two distinct scentsTOURMALINE produces a rich, white foam with excellent glide, allowing wash mitts or pads to glide smoothly over the paint for a safe contact wash. It effectively loosens dirt and greasy residues and rinses off easily without leaving streaks or smudges when used correctly.Its pH-neutral formula is safe to use with all common spray sealants, waxes, and ceramic coatings, preserving existing protection layers during regular care. After washing, the paint surface stays clean, smooth, and shiny.Besides classic hand washing, AUTO GRAPH TOURMALINE is perfect as a cleaning foam for foam cannons, making it ideal for regular, safe car care routines.Two Bold Fragrance VariantsAUTO GRAPH TOURMALINE comes in two signature scents to enhance your wash experience.Blue – sweet cherry and marzipan scentGreen – fruity forest berry aromaBlue: A sweet fragrance blend of cherry and marzipan, perfect for fans of rich, pleasant sweet scents.Green: A fruity, distinctive note reminiscent of aromatic forest berries for a fresh wash feel.Dosage and UsageFor best cleaning results, adjust AUTO GRAPH TOURMALINE dosage according to usage.Hand wash: 20–30 ml per 10 liters of waterHeavy dirt: up to 50 ml per 10 liters of waterFoam cannon: 2% solutionDo not let dry on surfaceUse on cool surfaces in shadeManufacturer recommends 20–30 ml per 10 liters for hand washing depending on dirt level, enough for a full wash bucket. Increase dosage for heavier contamination.For foam cannons, use a 2% dilution; actual mix may vary based on equipment and desired foam density.Wash vehicles preferably in shade on cool surfaces. Do not allow shampoo to dry and rinse thoroughly afterward. For extra paint care, use the two-bucket method with a clean wash mitt.

If you want to wash your car thoroughly and gently, the Detail Passion Wash Kit is your top choice. This set includes a sturdy 20-liter Grit Guard wash bucket with lid and debris screen, plus our Detail Passion Paintwork Lover wash mitt. Detail Passion – The Cult Brand for Car Care The Detail Passion team is known for perfect car care products. High-quality materials, flawless craftsmanship, and maximum innovation define this young brand that’s shaking up the market. With this set, you get what’s almost a classic for such a young brand. The Perfect Combo The Paintwork Lover is an incredibly gentle cleaning mitt. Manufactured in South Korea under German engineering oversight using the finest microfiber, it’s highly resistant to dirt and easy to clean. It protects your paintwork while tackling grime with uncompromising efficiency. New Version of the Popular Wash Kit with Choice of White or Black Bucket & Grit Guard The new version of our in-demand wash kit features the original Grit Guard bucket with debris screen and is available in either white or black.

The Detail Passion Silky Coral v2 is the next-level evolution of one of the most beloved drying towels for car care. This new version is engineered for superior car drying performance. Thanks to its optimized twisted fiber structure, this microfiber drying towel offers enhanced water absorption and an ultra-smooth glide over paintwork. The towel size has been adjusted to a more handy 45 x 75 cm, making it easier to handle and wring. Its new silver-gray color emphasizes the premium quality of this elite drying towel.Drying towel with extremely high water absorptionOptimized twisted fiber structure for better drying efficiencyNew, compact format 45 x 75 cmExceptional glide for gentle paintwork dryingPerfect for sealed and waxed vehiclesEdgeless design without harsh edgesElegant new silver-gray colorSilky Coral v2 – Advanced Premium Drying Towel for Auto DetailingThe Silky Coral v2 drying towel features an innovative twisted microfiber structure crafted on specialized looms in South Korea. Its ultra-fine, densely woven fibers enable superior water absorption compared to conventional microfiber towels. Improvements to the fiber structure have significantly increased the towel’s water absorption capacity over the previous version.This results in a drying towel for cars, motorcycles, and boats that soaks up water effortlessly while protecting sensitive surfaces. Delicate paints, piano finishes, wraps, chrome, and plastics can be dried safely without streaks or scratches.Unmatched Glide for Maximum Paint ProtectionA standout feature of the Detail Passion drying towel is its extremely smooth glide. The towel moves almost frictionlessly over paint, minimizing mechanical stress during drying. This makes it ideal for freshly washed vehicles with sensitive clear coats, ensuring the gentlest possible paint protection during care.Thanks to these properties, the Silky Coral v2 drying towel excels on cars treated with ceramic coatings, spray sealants, or wax. Its superior water repellence handling ensures a spotless, streak-free finish on hydrophobic surfaces.Optimized Size for Effortless DetailingThe new 45 x 75 cm size enhances usability for professional car care. It’s easier to control and wring out, enabling more precise work on large panels like hoods, roofs, and tailgates. Despite the reduced size, the towel maintains outstanding water absorption, often allowing one towel to dry an entire vehicle.Made from premium 70% polyester / 30% polyamide microfiber, it balances softness, durability, and lasting performance—perfect for enthusiasts, professional detailers, and anyone demanding a top-tier car drying towel.New Look: Elegant Silver GrayBeyond technical upgrades, the Silky Coral v2 drying towel also sports a fresh, classy silver-gray color. This sophisticated shade fits any professional wash and care setup and helps monitor dirt for optimal towel use.Care Tips for Long LifespanThis microfiber drying towel arrives individually packaged and is machine washable. For best longevity, use dedicated microfiber detergents like P&S Rags2Riches or mild liquid detergents without fabric softeners. Proper care preserves the towel’s high absorption power through many wash cycles.

If you want to wash your car thoroughly and gently, the Detail Passion wash kit is your top choice. This set includes a sturdy 20-liter Grit Guard wash bucket with lid and dirt guard, plus our Detail Passion Paintwork Lover wash mitt. Detail Passion – The Cult Brand for Car Care The Detail Passion team is known for perfect car care products. High-quality materials, flawless craftsmanship, and maximum innovation drive this young brand shaking up the market. With this set, you’re getting almost a classic - if that can be said about such a new brand. The Perfect Combo Paintwork Lover is an incredibly gentle cleaning mitt. Overseen by German engineers and made in South Korea from the finest microfiber, it resists dirt well and is easy to clean. It protects your car’s paint and is tough on grime. New Version of the Popular Wash Kit with Optional White or Black Bucket & Grit Guard The updated version of our popular wash kit comes with the original Grit Guard bucket plus dirt guard, available in either white or black.

EZ Detail Wheel Brush – The Classic Choice for Safe, Thorough Rim Cleaning The EZ Detail Wheel Brush has been a top pick for professional rim cleaning for years. Designed to effortlessly remove brake dust, road grime, oil, and tar from tight spokes, deep rims, and hard-to-reach areas. Made with premium Nylex bristles, this brush is ultra-soft, flexible, and scratch-resistant, perfect for delicate surfaces like painted alloy wheels, high-gloss rims, and polished finishes. The flexible, plastic-coated core adapts smoothly to complex wheel designs. Proudly made in the USA, it guarantees consistently high quality, making it a modern detailing legend. Gentle rim cleaning: Safely removes brake dust and dirt from sensitive rims. Original Nylex bristles: Extra soft, flexible, and scratch-proof. Flexible brush core: Perfect for spokes, rim wells, and tight spots. Chemically resistant: Compatible with strong rim cleaners. Made in USA: Durable, top-quality craftsmanship. Two Sizes for Precise Cleaning of Rims and Gaps The EZ Detail Wheel Brush comes in two sizes for the right fit on any wheel. The small version is ideal for tight spokes, narrow gaps, and intricate designs. The large version, with its longer length, reaches deep rim wells and large diameters easily. Both versions come in red and blue. Small size: Approx. 33cm length, 16.5cm brush head, 6cm diameter. Large size: Approx. 45cm length for extended reach. Colors: Available in red or blue. Versatile: Perfect for alloy, multi-piece, and delicate wheels. Unique Nylex Bristles – Memory Effect for Long-Lasting Performance The Nylex bristles feature a special memory effect. They’re highly elastic and return to their original shape after use. After storage or transport, bristles may look slightly bent or uneven, but this is a natural property, not a defect. If bristles appear bent right out of the box, restoring their shape is easy: simply hold the brush under hot water briefly, then flick it sharply with your arm. Heat and movement bring the bristles back to their factory shape. This elasticity makes Nylex bristles durable and highly effective in cleaning. Perfect for Modern Car Care and Demanding Enthusiasts Once you use an EZ Detail Wheel Brush, the benefits of Nylex bristles become indispensable. The blend of flexibility, scratch resistance, and durability means these brushes last for years. They are a trusted classic in manual car care, favored by pros and enthusiasts worldwide.

EZ Detail Brushes have been top choices for professional vehicle detailing for years, known for premium quality, gentle care, and durability. Thanks to their patented Nylex bristles—a special nylon with a soft, flexible structure—these brushes clean sensitive surfaces thoroughly without causing scratches. Made entirely in the USA, they outshine many basic brushes on the market in craftsmanship, materials, and longevity.EZ Detail Go Round Brush – Perfect for Wheel Wells, Motorcycles & Complex AreasThe EZ Detail Go is a purpose-built round brush ideal for larger surfaces and intricate vehicle spots. Its wide brush head makes it perfect for cleaning wheel wells, suspension parts, off-road vehicles, RVs, and hard-to-reach areas. Especially on motorcycles with complex shapes—like engines, frames, or swingarms—the brush excels. The soft Nylex bristles adapt flexibly to shapes, ensuring deep cleaning without harming delicate finishes.For detailed cars or classic motorcycles, gentle cleaning is key. The EZ Detail Go Round Brush effectively removes road grime, oil residues, brake dust, and deposits without damaging paint, powder coatings, or sensitive metals.Special round head brush: Ideal for wheel wells, motorcycles, and intricate vehicle partsOriginal Nylex bristles: Extra soft, flexible, and scratch-resistantChemically resistant: Suitable for strong wheel and vehicle cleanersCoated handle: Protects delicate surfaces during cleaningTotal length: approx. 42 cm for great reachBrush head length: approx. 18 cm for thorough cleaningBrush head diameter: approx. 10.5 cm—perfect for large areasColor: Classic blueNote on EZ Detail Brushes’ Nylex BristlesThe high-quality Nylex bristles feature a strong memory effect. The material is very elastic and returns to its original shape after use. During storage or transport, bristles may appear slightly bent. If so, hold the brush briefly under hot water and flick it with a quick arm motion. The heat and movement reset the bristles to their original factory shape.Once you’ve experienced the Nylex bristles of EZ Detail Brushes, they quickly become indispensable. Their blend of flexibility, gentleness, and durability makes them a modern detailing classic—perfect for pros and dedicated enthusiasts alike.

If you're passionate about car care—whether at the car wash, in your garage, or on the go—you want your vehicle to not only look clean but also shiny and well-maintained. Car care enthusiasts pay special attention to organizing their detailing equipment. With the high-quality detailing bag, Meguiar's makes a statement. This new Soft Shell Case is an ideal gift idea and a favorite product for safe transport. Meguiar's Soft Shell Case: Available now at Chemical-Shark.de! Premium construction with a fantastic finish Prominent embossed Meguiar's logo on the front Thoughtful organization with a separate divider for separating care products and tools Perfect for those who always want their favorite products with them—nothing more, nothing less Numerous pockets with elastic bands for rattling-free storage Adjustable carrying strap Dimensions: 39 x 31 x 18 cm Our Recommendation: Essential car care products to take along in the Meguiar's Soft Shell Case For the Soft Shell Case, we recommend the following products that fit perfectly. The soft shell protects these items and allows for quick application at the car wash or fast charger (for our Tesla customers). The perfect shampoo: Meguiar's Ultimate Wash & Wax Carnauba Hybrid Shampoo The glossy surface: P&S Bead Maker Renny Doyle DoubleBlack For crystal clear windows: Gtechniq Glass Cleaner Perfect Glass G6 For drying: Meguiar's Supreme Drying Towel For wheels: Meguiar's Supreme Wheel Brush Farewell to brake dust: Sonax Wheel Cleaner Beast

Meguiar’s Hybrid Ceramic Wash & Wax Shampoo 1420mlMeguiar’s Hybrid Ceramic Wash & Wax Shampoo combines deep car cleaning with advanced hybrid ceramic technology. While washing, it adds a protective ceramic layer that delivers intense smoothness, brilliant shine, and strong water beading. Perfect for regular washes to maintain existing protection or quickly shield your paint effortlessly.2-in-1 car shampoo with integrated hybrid ceramic sealantGentle cleaning with built-in paint protectionEnhances shine, smoothness & water beading effectSafe for all glossy and clear coatsHybrid Ceramic Tech for Every WashAdvanced formula blends premium surfactants with SiO₂-based hybrid ceramic components. Loosens dirt effectively, leaving a protective ceramic layer on the paint during rinsing. The result: a visibly glossy finish with improved water repellency—no extra effort needed.Gentle Wash with Stunning ShineRich, slick foam reduces wash swirl risks while boosting paint depth and delivering a smooth, cared-for surface feel. Existing waxes or ceramic coatings stay intact and are enhanced.Simply mix the shampoo with water in a wash bucket. Clean the vehicle as usual with a wash mitt, then rinse thoroughly. The ceramic effect activates during rinsing to provide instant water beading. After drying, the paint looks smooth, glossy, and visibly protected.Meguiar’s Hybrid Ceramic Wash & Wax Shampoo is perfect for anyone wanting combined cleaning and protection every wash. Saves time, boosts lasting shine, and helps keep your paint looking flawless long-term.

Purestar Creamy Wash Pad neon green with Wrist Strap Purestar Creamy Wash Pad neon green ensures maximum safety, exceptional glide, and top paint protection during car washing. Its blend of extra-long, ultra-soft microfibers and very high material density delivers rich foam and a gentle washing feel—perfect for delicate and well-maintained paint surfaces. Long, soft microfibers High material density: 1200 GSM Exceptional foam generation Wrist strap for secure handling Made in Korea Dimensions: approx. 20 × 15 × 5 cm The fluffy fibers reliably trap dirt deep inside the pad, keeping contaminants away from the paint and greatly reducing swirl and micro-scratch risks. The dense fibers also ensure excellent foam retention and smooth, easy gliding over the surface. Thanks to its special fiber structure, the Purestar Creamy Wash Pad neon green is safe around emblems, lettering, edges, and trims. Fiber snagging or catching is effectively minimized, boosting control during washing. The integrated wrist strap prevents accidental drops and provides extra security, even with wet hands. Its eye-catching white and neon green color also makes visual dirt checks easy. Purestar Creamy Wash Pad neon green is the perfect choice for gentle, controlled, and professional car wash care.

Purestar Creamy Wash Pad neon peach with Wrist Strap Purestar Creamy Wash Pad neon peach ensures maximum safety, exceptional glide, and superior paint protection during car washing. The blend of extra-long, ultra-soft microfibers and a very high material density delivers rich foam generation and an incredibly gentle wash experience – perfect for sensitive and well-maintained paint surfaces. Long, soft microfibers High material density: 1,200 GSM Massive foam creation Wrist strap for secure handling Made in Korea Dimensions: approx. 20 × 15 × 5 cm The long, fluffy fibers reliably trap dirt particles deep inside the pad, keeping grime away from the paint and significantly reducing swirl marks and micro-scratches. The dense fibers also ensure excellent foam retention and smooth, effortless gliding over surfaces. Thanks to its special fiber structure, the Purestar Creamy Wash Pad neon peach is safe for emblems, lettering, edges, and trims. Fiber snagging is minimized, enhancing control during the wash process. The integrated wrist strap prevents accidental drops and ensures extra safety even with wet hands. The vivid white and neon peach colors help visually detect dirt buildup. Purestar Creamy Wash Pad neon peach is your go-to choice for gentle, controlled, and professional vehicle washing.

Cleantle DAILY SHAMPOO Car Shampoo Fruits Scent – Gentle Wash with Fresh Fruity AromaCleantle DAILY SHAMPOO Car Shampoo Fruits Scent is a premium car shampoo designed for regular, gentle vehicle cleaning. Its pH-neutral, paint-safe formula effectively removes road dirt, dust, and residues without harming wax or sealant layers. Made for classic hand washing, this shampoo is perfect not only for cars but also for caravans, motorhomes, and motorcycles, making it a versatile choice for complete vehicle care.pH-neutral car shampoo for regular hand washGentle yet thorough cleaning of paint, glass, and plasticsSuitable for cars, caravans, motorhomes, and motorcyclesHigh lubricity reduces wash-induced micro scratchesRich foam and economical in useIntense fruity scent for a refreshing wash experienceThe balanced detergent blend delivers effective dirt removal with excellent material safety. Thanks to its exceptional glide, the wash mitt slides smoothly over surfaces, significantly lowering the risk of micro-scratches. Cleantle DAILY SHAMPOO Car Shampoo Fruits Scent is ideal for well-maintained vehicles with wax, sealant, or ceramic coating, supporting safe and gentle cleaning.An outstanding feature is the fruity scent that releases a fresh, ripe summer fruit aroma during washing, enhancing the whole cleaning session. This vibrant fragrance creates a pleasant atmosphere, turning car washing into a true care ritual far from typical neutral detergent odors.Whether as a gentle car shampoo for regular maintenance or for larger vehicles like campers and caravans, Cleantle DAILY SHAMPOO Car Shampoo Fruits Scent combines deep cleaning, high material protection, and an exceptional scent in a modern shampoo formula.

Cleantle TEDDY BEAR Wash Mitt – Ultra Soft Microfiber for Gentle Car Care Cleantle TEDDY BEAR Wash Mitt is an ultra-soft car wash mitt designed to protect your paintwork. Its fluffy, long-pile microfiber traps dirt particles safely inside, greatly reducing micro-scratch risks. Perfect for delicate hand washing on vehicles with wax, sealant or ceramic coating. Ultra-soft microfiber wash mitt High dirt retention thanks to long-pile structure Paint-friendly hand wash with minimized scratch risk Ideal for two-bucket method Suitable for cars, RVs and motorcycles Comfortable fit for controlled washing The dense, plush fibers glide smoothly over surfaces, offering safe and effective dirt pickup without scratching. This mitt excels on sensitive, freshly sealed or coated paint finishes. Used with premium car shampoo and the two-bucket method, the Cleantle TEDDY BEAR Wash Mitt ensures a thorough yet gentle vehicle wash. A must-have microfiber accessory for serious car care enthusiasts.

DIY Detail Incredible Suds Shampoo – Gentle & Thorough Hand Car Wash Maximum Foam Production for Safe Car Washing Regular, thorough cleaning is essential for maintaining the value of a vehicle. A gentle yet effective formula protects the paint from scratches while reliably removing dirt. DIY Detail Incredible Suds Shampoo offers just these properties: thanks to its special formula, it creates a dense, long-lasting foam that securely encapsulates dirt and ensures a gentle car wash. Whether daily grime, dust, or insect residues – deep cleaning meets maximum paint protection. Perfect for Hand Car Washing The manual vehicle wash offers full control over the cleaning process and prevents micro-scratches that may occur from improper washing methods. DIY Detail Incredible Suds Shampoo impresses with: Intensive Foam Production: Thick foam layer protects against scratches and encapsulates dirt particles. High Glide Properties: Wash mitt glides effortlessly over the paint, reducing friction and minimizing swirls. Paint-Friendly Formula: pH-neutral and safe for wax, sealants & ceramic coatings. Pleasant Scent: Provides a fresh care experience during car wash. High Yield: A small amount is sufficient for effective cleaning. DIY Detail Incredible Suds Shampoo – Powerful Cleaning with Maximum Paint Protection Car shampoos with aggressive ingredients often attack existing protective layers and can damage the paint over time. DIY Detail Incredible Suds Shampoo combines strong cleaning power with gentle care. Thanks to its pH-neutral formula, it is suitable for all vehicle surfaces and maintains the protection of existing wax and sealant layers. Advantages at a Glance Foam Strong & Gentle: Deep cleaning with maximum protection for the paint. pH Neutral: Safe for all surfaces & existing protective layers. High Glide Properties: Wash mitt glides effortlessly and reduces the risk of micro-scratches. Fresh Scent: Pleasant fragrance experience during car washing. Concentrated Formula: Highly efficient and suitable for many washes. DIY Detail Incredible Suds Shampoo is the ideal choice for a paint-friendly, thorough hand car wash with rich foam and optimal protection.

Gtechniq introduces GWash v2, an improved version of the popular auto shampoo. This new formulation utilizes surfactants for a safer and more thorough cleaning. Gtechniq meets its high standards for eco-friendly and sustainable cleaning agents, as GWash v2 is 100% biodegradable. Additional innovative features have been added to this highly concentrated shampoo, providing excellent cleaning performance with just 20ml in 20 liters of water. Specially Developed Binding Agent for Thorough Car Wash When cleaning ceramic-coated or sealed surfaces, the high water repellency on the surface can cause cleaning agents to not adhere long enough, reducing effectiveness. This may lead to dirt particles being pushed over the paint with the wash mitt, resulting in micro-scratches and unnecessary strain on the coating. Gtechniq minimized this risk in GWash v1 by preventing the shampoo from detaching too quickly. GWash v2 now features a unique binding agent that creates a glide film, making washing even safer and gentler. Though specifically designed for ceramic coatings, it is also a high-quality shampoo for uncoated or synthetic wax-coated vehicles. GWash v2 - Perfect Not Only for Sealed Vehicles Perfect for ceramic-coated vehicles 100% biodegradable Highly concentrated; only 20ml for 20 liters of water needed Pleasant grapefruit scent

"Ceramic Buff Splitted" by "Detail Passion" is a special version of the Ceramic Buff towel series. Made with highly absorbent terry fiber and ultrasonic cut edges, it’s designed specifically for polishing off excess oily ceramic sealants and toppings. With increasingly effective base layers in two-coat ceramic coatings like Gtechniq Crystal Serum, removing and polishing off toppings can be time-consuming and demanding. This is because the base layer causes "sweating" or solvent beading, which must be fully removed and polished for a crystal-clear finish. Ceramic Buff Splitted: Specialized Microfiber for Two-Coat Ceramic Coatings Ceramic Buff Splitted simplifies polishing of "sweating" ceramic coatings, especially with toppings or sacrificial layers. It also works perfectly as a second cloth after leveling ceramic coatings, reducing microfiber consumption during application. The lint-free towel features a very soft fiber blend of 70% polyester and 30% polyamide. It’s ideal for ceramic sealants like Modesta, CarPro, Gyeon, Gtechniq, Servfaces, Artdeshine, Diamond ProTech, and Nanolex. Gentle All-Round Towel for Perfect Exterior and Interior Car Care The extra soft, absorbent fibers make Ceramic Buff Splitted great for polishing waxes, removing oily and lubricating polishes, and spray sealants. It’s also suitable for interior care—perfect for gently cleaning delicate piano lacquers, treating plastics, or cleaning interior trims. Despite its delicate ultrasonic-cut edges, it’s durable and withstands many washes. Machine wash at max 40°C without fabric softener.

Experience next-level drying with the new Detail Passion TigerShark v2 Drying Towel. Maintaining its proven 950 GSM weight, both sides now feature the innovative hybrid weave for maximum water absorption and supreme paint protection. This ultra-soft, highly absorbent microfiber towel is available in two practical sizes, perfect for professional car drying. Detail Passion TigerShark v2 – The Ultimate Drying Towel for Demanding Detailers The TigerShark v2 Drying Towel combines top-notch absorbency with an exceptionally gentle touch. Its new double-sided hybrid structure of twisted and split fibers ensures efficient, paint-friendly drying—whether using wiping or dabbing techniques. A fresh upgrade: the super-soft velour microfiber edge now matches the towel’s color, seamlessly blending whether in striking Seablue or subtle Icegrey. Rounded corners add extra safety during use. Optimal Fiber Blend Meets Striking or Understated Style Like the popular Hawk Edgeless polishing towel, Detail Passion uses a time-tested fiber mix of 70% polyester and 30% polyamide in the TigerShark v2. This blend provides the perfect balance of softness, absorbency, and durability. Visually, the towel impresses with an eye-catching Seablue featuring a premium multicolor effect and a stylish, subtle Icegrey option—ideal for enthusiasts preferring a clean, minimalist look. TigerShark v2 and Baby TigerShark v2 – Two Sizes, Two Looks, Full Performance The TigerShark v2 comes in a generous size of 50 x 75 cm, perfect for large-area vehicle drying. For smaller spots, wheels, or interiors, the handy Baby TigerShark v2 at 30 x 30 cm is available. Both have the same 950 GSM weight, are easy to wring out, and extremely durable. Each towel is individually packed in a premium, resealable Detail Passion-designed pouch, reflecting the product's high-quality appeal. Care Tips for Maximum Performance and Longevity For best results, we recommend washing with a high-quality microfiber detergent like P&S Rags2Riches or a liquid detergent free from softeners. The towels are machine washable at 40°C. After washing, air dry first and then tumble dry for a maximum of 5 minutes on low heat. Note: To preserve colorfastness and avoid dye transfer, wash towels separately during the first wash. Full absorbency is achieved after 2–3 washes.

While we can't guarantee that using the innovative RAGS TO RICHES™ microfiber towel detergent will transform you from "dishwasher to millionaire," we can say that the masterminds behind this product are the legends of the detailing business: renowned detailer Renny Doyle, ambassador and product manager Levy Gates from The Rag Company, and brothers Dave and Bob Philips from P&S Detailing Products. The result is a highly effective product for cleaning microfiber towels, foam pads, cotton, and other fabric blends. RAGS TO RICHES™ is a concentrated formula that can be used sparingly. Revitalize Your High-Quality Microfiber Towels: P&S Detailing Products | The Rag Company - RAGS TO RICHES™ With RAGS TO RICHES™, microfiber can be fully rejuvenated, and common dirt and residue from polishes, polymers, cleaners, and waxes are completely removed from the fibers. The cleaning process restores the fiber's high absorbency, while a special color-refreshing formula resets the color and brightness to their original levels. RAGS TO RICHES™ is designed for microfiber products but also works excellently on polishing pads and natural fibers like fur or wool. Dosing and Application Recommendations For small wash loads and medium soiling, one fluid ounce (30ml) is sufficient per wash load. For larger wash loads and/or heavier soiling, usually two fluid ounces are adequate. RAGS TO RICHES™ is sufficient as a standalone detergent; no other detergents need to be added. Used towels can also be pre-cleaned directly in a cleaning solution of 20 liters with 1-2 fluid ounces (30-60ml). For cleaning polishing pads, a detergent/water solution of 10 liters and 2 fluid ounces (60ml) can be used. RAGS TO RICHES™ has been certified by the product management and development team of the German manufacturer "Detail Passion" for their microfiber products.

Drying Twisted 2.0 is the successor to the popular Drying Twisted microfiber towel from Detail Passion. Made from twisted microfibers, this towel ensures maximum water absorption. Detail Passion maintains its high-quality fiber mix of 70% polyester and 30% polyamide in the new version. With an increased fiber density of 1100 GSM, the Drying Twisted 2.0 outperforms its predecessor and is available in two sizes.Detail Passion Drying Twisted 2.0: Fast Drying with Premium FibersDesigned for rapid and thorough water absorption, this towel offers high fiber density while remaining easy to handle in both available sizes due to its dimensions and weight. Unlike oversized towels with excessive GSM counts above 1000, Detail Passion balances softness and wringability. The stylish ice grey and seablue color combo is fade-resistant. As an edgeless towel, it absorbs water efficiently even at the edges.Available in two sizes, the Drying Twisted Baby measures 40 x 40 cm, perfect for light drying, while the larger 50 x 60 cm size handles SUVs and large station wagons effortlessly.Comparison to Hybrid TigerShark TowelThe Hybrid TigerShark combines twisted fibers with circular knit plush fibers, suitable for drying and polishing care products. Drying Twisted 2.0 is a pure drying towel, ideal for vehicles protected with ceramic coatings, spray sealants, or wax. Despite being made entirely of twisted fibers, it remains ultra-soft.Highly absorbent microfiber drying towelEdgeless design for maximum edge absorptionWringable and machine washableMaterial: 70% polyester, 30% polyamide

Gentle Revolution in Paint Care Detail Passion SnowCloud Dry Towel sets new standards for ultra-soft, paint-friendly microfiber drying towels in the detailing scene. Crafted by the Detail Passion team, this exceptionally plush, high-pile towel glides almost weightlessly over even the most sensitive surfaces. Unlike typical twisted-loop fibers, it features an ultra-fluffy structure, praised by many users as the softest drying towel on the market. extremely soft, no twisted-loop fiber premium split microfiber from South Korea perfect for blotting method & delicate paints ideal for detailers & spray sealants available in 1200 GSM (40×40 cm) & 1500 GSM (40×60 cm) supports waterless or low-water washing machine washable as per instructions Pure White for Maximum Control Another key advantage of the SnowCloud Dry Towel is its pure white color. In car care, a light towel is a real safety factor: even the tiniest dirt, dust particles, or fine stones become immediately visible. This prevents unnoticed particles from being dragged across the paint – crucial for sensitive or freshly detailed surfaces. The white hue ensures ultimate control and safe, paint-friendly handling. High-Density Fibers for Perfect Drying The SnowCloud range comes in two variants: 1200 GSM (40×40 cm) and 1500 GSM (40×60 cm). Both versions boast an impressively dense fiber weave allowing gentle, pressure-free drying without streaks or damage to modern sealed paints. Especially with the blotting method, this towel preserves sealants, waxes, and coatings. It’s also great for quick detailers, spray sealants, and gentle polishing of finishing compounds. Korean Premium Fiber – Crafted to Perfection Manufactured in South Korea under the Detail Passion team’s specifications, the towel uses top-tier split microfiber – 70% polyester and 30% polyamide blend. This composition ensures outstanding absorbency, supreme softness, and scratch-free performance, even on sensitive solid colors or freshly polished shiny surfaces. The New Benchmark in Car Drying With its gentle fiber density, extreme softness, and uncompromising quality, the SnowCloud Dry Towel meets all demands of a modern car drying towel and surpasses standard towels in care, glide, and finish.

The iconic German brand Detail Passion produces its high-pile Hawk Edgeless polishing cloth under strict quality control in South Korea. Made from 100% Korean split microfiber with an ultra-soft blend of 70% polyester and 30% polyamide, this mix guarantees scratch-free safety even on sensitive solid paints and soft clear coats after high-gloss finishing polish. The first own microfiber product by Detail Passion: Hawk Edgeless 500gsm The Detail Passion team's standard in searching for the perfect fiber to process detailers, spray sealants, and waxes was very high. No wonder they took almost a full year. After intensive tests on various paint panels, including solid colors, paints without clear coats, matt finishes, and wraps, the key parameters were defined. Numerous quality assurance tests with several test deliveries and prototypes followed. The result was available mid-2019 with Hawk Edgeless and has since gained strong popularity in the car care scene. Initially available in sky blue, Hawk Edgeless now also comes in an attractive sea blue with a multicolor effect. The high-end detailing polishing cloth for demanding pros: Now in sky or sea blue at Chemical-Shark.de Hawk Edgeless comes in the classic size of 40x40cm or as Baby Hawk Edgeless in 20x20cm. It's perfect for removing and buffing detailers, waxes, high-gloss polishes, and sealants. Suitable for paint, chrome, glass, piano lacquer, carbon, fiberglass, and gelcoats. Especially recommended for waterless or low-water washing. Each cloth is individually packed in a resealable plastic pouch with washing instructions. Hawk Edgeless is ultrasonic cut, ensuring no hard edges. We recommend washing with P&S Rags2Riches or similar microfiber detergents; regular liquid detergents without fabric softeners also work well.

The new Detail Passion TigerShark v2 drying cloth elevates this popular car care brand's drying game to the next level. Retaining the proven 950 GSM fabric weight, both sides now feature the same innovative hybrid weave for maximum water absorption and ultimate paint protection. This soft, ultra-absorbent microfiber drying cloth comes in two handy sizes and is perfect for professional vehicle drying. Detail Passion TigerShark v2 – The Drying Cloth for Top Performance The TigerShark v2 drying cloth combines maximum absorbency with an exceptionally gentle touch. Thanks to the new dual-sided hybrid structure of twisted and split fibers, the cloth dries efficiently while being gentle on paint—whether using wiping or blotting techniques. A new feature is the super-soft velour microfiber edge now color-matched to the cloth. Unlike the previous version’s black edge, the v2's edge blends seamlessly in Icegrey or Seablue. Rounded corners provide extra safety during use. Optimal Fiber Blend Meets Striking or Subtle Design Like the popular Hawk Edgeless polishing cloth, Detail Passion uses a proven fiber mix of 70% polyester and 30% polyamide in the TigerShark v2 drying cloth. This mix offers the perfect balance of softness, absorbency, and durability. Visually, it impresses too: alongside the eye-catching Seablue with elegant multi-color effect, TigerShark v2 is also available in a refined, subtle Icegrey, ideal for enthusiasts who prefer a sleek and clean look. TigerShark v2 and Baby TigerShark v2 – Two Sizes, Two Styles, Full Power The full-size TigerShark v2 (50 x 75 cm) is perfect for large vehicle surfaces. For smaller areas, wheels, or interiors, the handy Baby TigerShark v2 at 30 x 30 cm is ideal. Both have the same high 950 GSM fabric weight, are easy to wring out, and extremely durable. Each cloth is individually packed in a premium, re-sealable pouch with Detail Passion design, matching the product’s high-quality feel. Care Tips for Maximum Performance and Longevity For best care, use a high-quality microfiber detergent like P&S Rags2Riches or a liquid detergent without fabric softener. The cloths are machine washable at 40°C. After washing, allow to air dry first, then finish with a maximum of 5 minutes in the dryer on low heat. Note: To preserve colorfastness and avoid bleeding, wash the cloths separately for the first wash. Full absorbency develops after 2–3 washes.

The Detail Passion Silky Coral v2 is the next-level evolution of one of the most beloved drying towels for car care. This new version is engineered for superior car drying performance. Thanks to its optimized twisted fiber structure, this microfiber drying towel offers enhanced water absorption and an ultra-smooth glide over paintwork. The towel size has been adjusted to a more handy 45 x 75 cm, making it easier to handle and wring. Its new silver-gray color emphasizes the premium quality of this elite drying towel.Drying towel with extremely high water absorptionOptimized twisted fiber structure for better drying efficiencyNew, compact format 45 x 75 cmExceptional glide for gentle paintwork dryingPerfect for sealed and waxed vehiclesEdgeless design without harsh edgesElegant new silver-gray colorSilky Coral v2 – Advanced Premium Drying Towel for Auto DetailingThe Silky Coral v2 drying towel features an innovative twisted microfiber structure crafted on specialized looms in South Korea. Its ultra-fine, densely woven fibers enable superior water absorption compared to conventional microfiber towels. Improvements to the fiber structure have significantly increased the towel’s water absorption capacity over the previous version.This results in a drying towel for cars, motorcycles, and boats that soaks up water effortlessly while protecting sensitive surfaces. Delicate paints, piano finishes, wraps, chrome, and plastics can be dried safely without streaks or scratches.Unmatched Glide for Maximum Paint ProtectionA standout feature of the Detail Passion drying towel is its extremely smooth glide. The towel moves almost frictionlessly over paint, minimizing mechanical stress during drying. This makes it ideal for freshly washed vehicles with sensitive clear coats, ensuring the gentlest possible paint protection during care.Thanks to these properties, the Silky Coral v2 drying towel excels on cars treated with ceramic coatings, spray sealants, or wax. Its superior water repellence handling ensures a spotless, streak-free finish on hydrophobic surfaces.Optimized Size for Effortless DetailingThe new 45 x 75 cm size enhances usability for professional car care. It’s easier to control and wring out, enabling more precise work on large panels like hoods, roofs, and tailgates. Despite the reduced size, the towel maintains outstanding water absorption, often allowing one towel to dry an entire vehicle.Made from premium 70% polyester / 30% polyamide microfiber, it balances softness, durability, and lasting performance—perfect for enthusiasts, professional detailers, and anyone demanding a top-tier car drying towel.New Look: Elegant Silver GrayBeyond technical upgrades, the Silky Coral v2 drying towel also sports a fresh, classy silver-gray color. This sophisticated shade fits any professional wash and care setup and helps monitor dirt for optimal towel use.Care Tips for Long LifespanThis microfiber drying towel arrives individually packaged and is machine washable. For best longevity, use dedicated microfiber detergents like P&S Rags2Riches or mild liquid detergents without fabric softeners. Proper care preserves the towel’s high absorption power through many wash cycles.

Detail Passion Creamy Wash Wash Pad with Wrist LoopThe Detail Passion Creamy Wash Wash Pad is crafted for an exceptionally thorough, comfortable, and paint-safe car wash. Its premium fiber structure absorbs an immense amount of shampoo water, reliably holding it inside the pad. Light pressing or squeezing releases the shampoo water in a controlled way, instantly creating a rich foam. This dense foam improves glide on the paint and helps gently lift away dirt without harming the surface. Available in striking neon green and ocean blue colors.Extremely high water and shampoo absorptionIntense foam generation by gentle pressing or squeezingUltra-light base fiber for easy, controlled handlingLong, soft fibers for especially gentle car washingSafe on emblems, edges, seams, and trimsPractical wrist loop for extra gripAvailable in neon green and ocean bluePerfect high-quality wash pad and alternative to wash mittsMassive Shampoo Water Absorption with Intense Foam BoostA key strength of the Detail Passion Creamy Wash Pad is its outstanding absorption capacity. It soaks up the prepared wash solution deeply, keeping a large amount of water and shampoo ready at the vehicle surface. Light pressing releases fresh shampoo water, and firmer squeezing produces a thick foam that can be evenly spread over the paint. This keeps the surface optimally lubricated while the pad glides smoothly and evenly across the paintwork.Ultra-Light Base Fiber with Long, Soft FibersThe pad combines a very lightweight base fiber with long, exceptionally soft washing fibers. Despite its high shampoo water uptake, the Creamy Wash pad remains easy to control without unnecessary force, gliding effortlessly over hoods, roofs, doors, and side panels. The long fibers encapsulate dirt particles and lift them away from the sensitive paint surface, while flexibly adapting to contours and intricate vehicle areas.Its safe use on emblems, lettering, edges, seams, and trims is ensured by the soft, fluffy fibers that don’t snag on delicate details. This makes the wash pad perfect for large paint surfaces and demanding detail zones alike.Secure Grip Thanks to the Practical Wrist LoopThe integrated wrist loop adds extra grip throughout the entire wash process. When fully soaked, wash pads can easily slip out of your hand. The loop greatly reduces this risk, preventing the pad from falling to the floor where it could pick up sand or coarse dirt particles. The Creamy Wash pad merges premium fiber quality with secure, comfortable handling.The Perfect Blend Between Wash Pad and Wash MittThe Detail Passion Creamy Wash pad offers the perfect combo of precise control from a classic wash pad, high absorbency like a premium wash mitt, and added security from a wrist loop. It lies freely in the hand, allowing flexible rotation and precise targeting of various vehicle areas. Its massive shampoo water absorption ensures dense foam buildup and consistent lubrication of the paint. The Creamy Wash is the ideal pick for detail-minded car care enthusiasts and pros who demand a high-quality, secure, and ultra-absorbent wash pad.

Detail Passion Creamy Wash Pad with Wrist Strap The Detail Passion Creamy Wash Pad is crafted for an especially thorough, comfortable, and paint-friendly car wash. Its premium fiber design soaks up a massive amount of shampoo water and securely holds it inside the pad. Gentle pressing or squeezing releases the shampoo water in a controlled way, instantly creating rich foam. This dense foam layer boosts glide on the paint, helping to gently lift dirt off the surface without scratches. Available in striking neon green and ocean blue. Massive absorption for water and car shampoo High foam generation with gentle pressing or squeezing Ultra-light base fiber for smooth, controlled handling Long, soft fibers for a gentle car wash Safe on emblems, edges, creases, and trim Practical wrist strap for extra grip Available in neon green and ocean blue Perfect as a premium wash pad or alternative to wash mitts Exceptional Shampoo Water Absorption and Rich Foam One of the top strengths of the Detail Passion Creamy Wash Pad is its outstanding absorption capacity. The pad soaks up your prepared wash solution deeply, maintaining a large amount of water and shampoo right at the paint’s surface. A light press releases fresh shampoo water, while a firmer squeeze produces a thick foam layer that spreads evenly over the paint. This keeps the surface perfectly wet during washing while the pad glides smoothly and evenly across the car. Feather-light Base Fiber with Long, Soft Fibers This pad combines an ultra-light base fiber with long, soft washing fibers. Despite its huge shampoo water capacity, the Creamy Wash Pad remains easy to control, requiring no unnecessary force when used on hoods, roofs, doors, and side panels. The long fibers gently envelop dirt and transport it away from delicate paintwork. They’re flexible enough to adapt to contours and tricky car areas safely. The pad also excels on emblems, lettering, edges, creases, and trim with a high level of application safety. The fibers are fluffy yet lightweight and flexible to avoid snagging on delicate details. This makes the pad ideal for both large paint surfaces and detailed zones. Secure Handling Thanks to the Practical Wrist Strap The built-in wrist strap provides extra grip throughout the entire washing process. When fully soaked, pads can easily slip from your hand. The strap minimizes this risk and prevents accidental drops that could pick up sand or coarse dirt from the ground. This combination of premium fibers and secure handling makes the Creamy Wash Pad stand out. The Perfect Blend of Wash Pad and Wash Mitt The Detail Passion Creamy Wash Pad offers the best of both worlds: the precise control of a traditional wash pad, the high absorbency of a quality wash mitt, and the extra security of a wrist strap. It fits comfortably in your hand, allowing flexible rotation and precise movement over different car parts. Its exceptional shampoo water retention ensures rich foaming and consistent supply of fresh wash solution to the paint. This makes Creamy Wash the ideal choice for passionate car care enthusiasts and pros seeking a premium, safe, and ultra-absorbent wash pad.

Gtechniq C2 Liquid Crystal v4 – Spray Coating with New 2025 Formula The revamped version of the popular Gtechniq C2 Liquid Crystal coating is here – now featuring the new 2025 formula. It combines maximum user-friendliness with enhanced protection performance, and is even safe for matte surfaces. Additionally, the coating is ideal as a drying aid: Spray it on the wet vehicle, making it easier to dry, reducing micro-scratches, and sealing the surface during the drying process. New 2025 Formula: Improved performance and longer durability High dirt repulsion: Water, dust, and dirt bead off effectively Safe for matte finishes: No gloss enhancement, no haze Can also be used as a drying aid: Protection and gliding effect in one step Easy application: Spray on, wipe off, done Wide range of applications: Suitable for paint, plastic, glass, and wheels C2 Liquid Crystal v4 creates an invisible yet highly effective protective layer that not only shields the vehicle from environmental influences but also keeps it cleaner for longer. The coating is highly hydrophobic, easy to apply, and impresses with its versatility. Whether glossy clear coat or matte car wrap – the new version remains visually neutral and provides reliable protection. An ideal product for those seeking professional-level care and protection – now better than ever.

Gtechniq Ceramic Coating Professional Set: Crystal Serum Light (CSL) and EXOv5 The Gtechniq Ceramic Coating represents cutting-edge technology in paint protection. With the professional set consisting of Crystal Serum Light (CSL) and EXOv5, Gtechniq offers an innovative two-layer system that sustainably protects vehicle paints while delivering an impressive appearance. Crystal Serum Light (CSL) – The Perfect Base Crystal Serum Light is the prosumer version of the renowned Crystal Serum Ultra, delivering outstanding results. With a hardness of 9H, CSL protects the paint from micro-scratches, chemicals, and extreme temperatures. Thanks to its chemical resistance, the protection remains stable even when in contact with strong cleaning agents or aggressive environmental influences. EXOv5 – The Glossy Finish After the curing of CSL, EXOv5 is applied as the second layer. This coating enhances the water-repellent properties and ensures impressive surface smoothness. Water and dirt simply bead off, making the cleaning of the vehicle significantly easier. Application of the System The application of the Gtechniq Ceramic Coating Professional Set is straightforward and can be completed in a few steps. After thoroughly cleaning and polishing the vehicle, CSL is first applied as the base. After a short curing time, EXOv5 is applied to complete the protection and appearance. Available Sizes and Usage The Gtechniq Ceramic Coating Professional Set is available in two practical sizes: 30ml Set: Contains 30 ml CSL and 30 ml EXOv5, sufficient for an average sedan. 50ml Set: Includes 50 ml CSL and 50 ml EXOv5, suitable for larger vehicles such as SUVs or vans. The individual ceramic coatings come with protective gloves, an applicator, and a pipette. Long-term Benefits of the Gtechniq Professional Set Maximum Protection: The paint is shielded from scratches, chemical impacts, and UV radiation. Ease of Maintenance: The hydrophobic properties reduce dirt accumulation and simplify cleaning. Brilliant Gloss: The paint achieves a deeper color effect and an impressive shine. Long-lasting Effect: With proper care, the protection lasts for years.

I1v3 Smart Fabric AB protects all types of fabrics from stains and dirt. Its unique water-based formula is breathable and extremely durable. Comprehensive independent tests (according to ISO 6330 5A and AATCC 22) show that Smart Fabric AB lasts 4 times longer than other products. A patented antimicrobial technology additive kills 99% of bacteria on treated surfaces. Smart Fabric AB also prevents mold and mildew from settling. This makes it ideal for use in vehicles and homes, protecting against harmful germs. I1v3 Smart Fabric AB protects textiles with colorfastness. The nanoparticles that make up Smart Fabric coat each individual fabric fiber, ensuring that the texture is not compromised and the material can breathe. Water- and oil-based liquids are repelled, allowing air to escape. Superhydrophobic Protection - Even More Effective than Previous Version I1v3 Smart Fabric AB is even more water-repellent than its predecessor, lasting up to four times longer than competing products. Water repellency has been significantly improved, allowing moisture to bead up and roll off the coated surface. Laboratory tests show that I1v3 meets the highest "ISO 5" water repellency standard set by the American Association of Textile Chemists and Colorists (AATCC). Wash tests show that the product retains its full effectiveness even after a 40-degree wash cycle and maintains full performance even after five washes. Fabric coating with up to 12 months durability Antibacterial and antifungal protection Extreme water and oil repellency Free from fluorinated hydrocarbons Ideal for convertible roofs and fabrics With I1v3 Smart Fabric AB, rough suede, Alcantara, open-pore wood, and stone can also be treated.

A clear view while driving is essential. This glass coating kit contains all the products you need for deep cleaning, coating, and maintaining your vehicle's windows. The Nanotech Glass Polish thoroughly cleans the glass and prepares the surface for the application of G1 Clear Vision Smart Glass. After application, Smart Glass creates an incredibly smooth, hydrophobic, and dirt-repellent barrier, providing you with enhanced visibility. Gtechniq Perfect Glass quickly and effectively removes dirt and dust, leaving a crystal-clear, streak-free finish. Gtechniq Glass Coating Kit 500ml G6 Glass Cleaner 100ml G4 Nanotech Glass Polish 15ml G1 Clearvision Smart Glass 2 x MF1 ZeroR Microfibre Buff Cloth 1 x MF5 Power Glass Cloth 1 x AP3 Soft Foam Applicator Pad

Wheels and tires are exposed to extreme dirt due to their proximity to the road and brakes. Additionally, cleaning wheels can be challenging because the wheel bed is hard to reach and the front has small areas, spokes, and grooves. A durable, dirt-repellent non-stick coating is essential to keep wheels cleaner for longer and simplify the cleaning process. Gtechniq Wheel Coating Kit The Wheel Coating Kit from a leading manufacturer of protective coatings includes everything needed for wheel coating. Gtechniq Wheel Armour C5 is specifically designed for alloy wheels and brake calipers. It is an extremely durable ceramic coating that withstands temperatures up to 600 degrees Celsius. 250ml Panel Wipe Degreaser for cleaning 30ml C5 Wheel Armour 3 x MF1 ZeroR Microfibre Buff Cloth

EXOv5 is, as the name suggests, the 5th generation of Gtechniq's EXO ceramic coating. Also known as the "Ultra Durable Hydrophobic Coating," it has been recognized for years as an extremely water-repellent, highly smooth, and glossy ceramic sealant for vehicle paint. The latest version sets new standards in coating technology, achieving more than 40% enhanced dirt repulsion, an astonishing contact angle of 115 degrees (extremely strong beading effect), significant gloss enhancement, exceptional paint smoothness, and an even simpler application. 5th generation Gtechniq EXO coating for automotive paint One Layer Coating or Topping for Crystal Lacquer C1, Crystal Serum Light CSL, Crystal Serum Ultra CSU Groundbreaking dirt and water repellency, contact angle 115 degrees, runoff angle 13 degrees Extremely high gloss and paint smoothness with Anticlogging (coating does not clog) Maximum reduction of surface energy Very easy to apply Longevity of one layer up to 24 months Longevity as a topping and multi-layered up to 5 years Included: coating, 1 pair of protective gloves, 1x AP2 applicator Latest Nanotechnology for Ceramic Paint Protection The development of EXOv5 took more than 3 years. The outcome of extensive formulations, laboratory and practical tests is a coating that provides users, both private and professional detailers, with an unprecedented overall performance. EXOv5 exceeds expectations in both individual disciplines and overall assessments. Gtechniq uses specific raw materials and additives for EXOv5 and consciously distances itself from the supposed hype surrounding graphene, nanofibers (borophene, nanodiamonds). Instead of succumbing to marketing buzzwords, they focused on further development with their experience as market leaders. Under the direction of chemist Lee Kennedy, they developed the Lee-Kennedy Test Protocol. This testing protocol achieves significant alignment between laboratory tests and field tests on trial vehicles for the first time. Through this protocol, EXOv5 was specifically optimized for dirt and oil repulsion. EXOv5 has already set the benchmark for dirt repulsion, and the bar has now been raised significantly. Single Layer Coating or Topping for Crystal Lacquer C1, Crystal Serum Light, and Crystal Serum Ultra EXOv5 can be used as a single layer coating or as a topping for other Gtechniq coatings. As a single-layer coating, EXOv5 already delivers all and more protective effects than was previously achieved with Crystal Serum Light and two layers of EXOv4. When used on Crystal Serum Light, EXOv5 significantly extends durability. Thanks to Anticlogging, it prevents the coating from clogging and losing its protective effects due to excessive dirt. Subsequently, EXOv5 shows significant dirt beading and sheeting. Essentially, the application process of EXOv5 follows the known application method of EXOv4. However, there is no need for redistributing or intensive wiping since EXOv5, due to its more modern solvents, does not leave a gray haze that requires polishing away. Our Application Video for Gtechniq EXOv5

Formulated with the latest weather-resistant Siloxane technology, the new version v2 of the HALO coating enhances the performance of paint protection films (PPF) and wrappings. The sealant chemically bonds to the protective film, providing an ultra-dense and flexible surface that protects against environmental influences and chemicals to which the vehicle is continuously exposed. The density of the coating and its low surface energy improve the dirt and water-repelling effect of PPF or wrappings. Stains caused by penetrating dirt are prevented, and yellowing due to UV rays is reduced. Ceramic coating for PPF and wrapping films Makes cleaning easier Compatible with glossy, matte, and satin films Single-layer application Durability of up to two years, approximately 40,000 km mileage Suitable for "self-healing films" Gtechniq HALOv2 Complete Set Includes 30ml or 50ml HALOv2 Flexible Film Coating 1 pair of protective gloves AP2 applicator Pictorial instructions Gtechniq sticker as proof of performance A key component of HALOv2 is that only one layer of the product now needs to be applied, as opposed to the previous version that required two layers, saving time and effort, making maintenance a breeze. Overall, HALO ensures that the PPF film remains in much better condition. Cleaning is significantly simplified. Stringent practical and lab tests have shown that HALO is compatible with all types of glossy, matte, and satin vinyl and PPF. It also demonstrably works on the latest self-healing and pre-treated hydrophobic films.

LUMINUS Graphene PRO Coating 50 ml is a high-end paint sealant designed for professionals and dedicated vehicle care enthusiasts. Developed with advanced graphene technology, it offers an uncompromising combination of maximum surface hardness, intense color depth, and exceptional durability. The coating creates an extremely resilient, chemical-resistant protective layer with pronounced hydrophobic and antistatic properties, which not only protects the paint long-term but also significantly facilitates vehicle cleaning. High chemical resistance Deep gloss & color intensification Strong hydrophobic & antistatic Up to 3 years durability High layer thickness due to graphene In our tests, the LUMINUS Graphene PRO Coating proved to be exceptionally resilient – it showed no weaknesses even against aggressive acidic and alkaline cleaners. The paint surface consistently impressed with remarkable smoothness and extreme hydrophobicity. Unlike many comparable graphene products, the PRO version, thanks to its special antistatic additives, also effectively defends against dust buildup, which often occurs during the summer months – a key advantage for a consistently clean vehicle surface. Particularly impressive about the LUMINUS Graphene PRO Coating is the extraordinary color intensification and the deep mirror-like gloss that emerges after application. The included graphene solid particles create an above-average layer thickness on the paint surface, responsible for this impressive optical performance. This effect is especially noticeable on dark or vividly colored paints – it ranks among the most intense we've observed in a coating so far. The manufacturer indicates a durability of up to three years for the LUMINUS Graphene PRO Graphene Coating – a figure that has already proven to be realistic in practice. With consistent maintenance and careful hand washing, however, experience shows that a significantly longer lifespan can be achieved. The stable layer structure and high chemical resistance of the coating suggest the potential for top-notch performance over several years.

NORDIC Pro Coatings GRAPHENE [GX] v2 – High-Performance Hybrid Graphene Ceramic Coating NORDIC Pro Coatings GRAPHENE [GX] v2 is the advanced evolution of the proven GX formula, designed for car care enthusiasts, private users, and professional detailers seeking maximum performance combined with ease of use. This modern ceramic coating harnesses cutting-edge graphene and polymer technology to deliver enhanced smoothness, extreme deep gloss, and significantly improved dirt and water repellency. NORDIC Pro Coatings GRAPHENE [GX] v2 Ceramic Coating Set The v2 version takes the popular GX coating's performance to the next level, showing noticeable improvements in all key vehicle detailing areas. Significantly increased hydrophobicity and dirt repellency – especially effective against organic contaminants like oils, proteins, and road grime Noticeably smoother surface – felt by touch and clearly visible during washing Extreme chemical resistance – withstands strong alkaline pre-cleaners, acidic wheel cleaners, and tar removers Outstanding coverage and deep gloss – thick layer for intense optical enhancement State-of-the-art polymer and nano-graphene technology – ensures maximum durability and performance User-friendly application – perfect for enthusiasts, private users, and professionals Versatile use – suitable for paint, plastics, carbon parts, wheels, and unpainted plastic components Durability with proper care: up to 4 years or 80,000 km (longer lifespan possible with careful maintenance) Available sizes: 10 ml (without set) and 30 ml or 50 ml sets including applicator and protective gloves Max Smoothness, Protection & Performance – Now in v2 GRAPHENE [GX] v2 was specifically developed to meet modern car care demands even better. The surface offers exceptional smoothness that not only feels premium but also significantly eases car washing. Water, dirt, and stubborn organic residues adhere less and are removed more efficiently. Enhanced chemical resistance makes this coating extremely durable against aggressive cleaners. Whether strong alkaline pre-cleaners, acidic wheel cleaners, or tar removers, GRAPHENE [GX] v2 remains stable and reliably protects surfaces from UV rays, road salt, and environmental pollutants. Another highlight of the v2 version is improved coverage with a richer deep gloss. The increased layer thickness delivers a noticeably richer paint finish and boosts color depth sustainably. Despite enhanced performance, application remains user-friendly and works on clear coats, plastics, carbon, wheels, and unpainted plastic surfaces. GRAPHENE [GX] v2 is not suitable for matte paints or matte wraps; GRAPHENE [60] is recommended for those surfaces. With correct care, the coating lasts up to 4 years or approximately 80,000 kilometers, with longer durability possible through meticulous maintenance. This offers an ideal blend of performance, optics, and everyday practicality. Differences Between NORDIC Pro Coatings GRAPHENE [60] and GRAPHENE [GX] v2 Target user: GRAPHENE [60] is exclusively for professional users; GRAPHENE [GX] v2 targets private users, enthusiasts, and professional detailers alike. Paint smoothness: GRAPHENE [GX] v2 delivers even stronger, highly tactile smoothness. Matte paint compatibility: GRAPHENE [60] works on matte paints and matte wraps (testing recommended). GRAPHENE [GX] v2 is not compatible with matte surfaces. NORDIC Pro Coatings products are PFAS-free and REACH-compliant, meaning they contain no environmentally persistent fluorinated compounds and meet the strict European Chemicals Regulation REACH. This ensures safe use, health safety, and a responsible choice for the environment and sustainability.

Activate notifications and receive an email when available. We expect the arrival of the machine in April 2025! ShineMate Polisher EB212 Kit – Complete Battery Excenter Polisher Set including Polishes & Pads The ShineMate EB212 is a compact and powerful battery excenter polisher with a fixed 12 mm stroke. It is specifically designed for precise polishing on smaller areas and is ideal for hard-to-reach spots like door handles, bumpers, or mirror housings. Thanks to its wireless design, it offers maximum freedom of movement and professional polishing performance. This special "Detailing Godfather" Edition comes with a black lever instead of the usual yellow – for a unique look! Why choose the ShineMate EB212? This high-quality mini polisher combines modern battery technology with an efficient excenter motion, ensuring an even polishing result without holograms. Particularly in areas where larger machines are impractical, the EB212 shows its strengths. Key Benefits of the ShineMate EB212 Cordless Freedom: No annoying cables, maximum flexibility. Efficient Battery Performance: 12V Li-Ion battery (2.5 Ah) for long runtimes. Consistent Power: 12 mm excenter stroke for an even polish. High-speed, low-vibration motor: Up to 7000 RPM for precise polishing tasks. Ergonomic Design: Lightweight and handy for comfortable working. Precise Control: Stepless adjustable speed for various applications. Technical Data of ShineMate EB212 Operating Mode: Battery Drive: Excenter with free-running plate Stroke: 12 mm Battery: 12V Li-Ion, 2.5 Ah Speed: 4000 to 7000 RPM (continuously adjustable) Backing Plate: 3 inches (75 mm) Weight: Lightweight and compact for precise work The Complete Set Accessories The ShineMate EB212 Detailing Godfather Set contains everything you need for professional polishing: ShineMate EB212 Battery Polisher 3" (75 mm) backing plate 12V 2.5 Ah Li-Ion battery Charger 2x 3.5" (90 mm) foam polishing pads Hex key Robust toolbox for storage AETERNO Zenit Pro Cut Compound 1000ml abrasive paste AETERNO Zenit Pro Polish Compound 1000ml high-gloss polish DP Pro Therminator 75mm Intermediate blue polishing pad AUTO GRAPH AVENTURINE paint cleaner Detail Passion 2Face polishing cloth Ideal for precise polishing tasks The EB212 battery excenter polisher is particularly suitable for small and cramped areas. While large polishing machines are often cumbersome, the EB212 allows for exact control and a clean polishing result. Application Areas Headlights and taillights Mirror housings and door handles Bumpers and diffusers Painted interior trim Conclusion – Compact Performance Without Compromises The ShineMate EB212 battery polisher is the perfect choice for detailing work and polishing smaller areas. Its 12 mm excenter stroke, wireless design, and high-quality craftsmanship make it an indispensable tool for professional car care. Secure your ShineMate EB212 Kit now and achieve perfect polishing results!

With the free-running orbital polisher EX620, the Asian manufacturer ShineMate expands its product range and applies the processing and material quality known and appreciated from the battery polisher EB351 to corded polishers. The new generation features an optimized 800W motor designed for maximum performance and user-friendliness. The EX620 polisher meets both enthusiast and professional demands at a very attractive price. Unmatched Powerful 125mm Orbital Polisher Powered by a carbon brush electric motor, the polisher achieves 3,000 to 5,800 orbital rotations per minute. With these performance values, an unprecedented cut for orbital polishers is achieved; compared to the previous model EX610, the rotation speed has been increased by 30% and the torque by 60%. A sophisticated cooling system ensures that prolonged operation at this performance level is feasible without overheating. The weight is 2.6kg and the orbital stroke is 15mm. Perfect Ergonomics for Polishing Enjoyment The housing of the EX620 orbital polisher is made of high-quality plastic with a rubberized soft grip for secure handling in the grip and guiding areas. All materials are designed for maximum durability. The infinitely variable selection switch allows you to adjust the power in 6 stages from distributing polish to heavy cutting. The operation begins with a switch that enables a soft startup. A locking button allows for continuous operation. The backing pad is equipped with an advanced cooling system, and any polishing dust generated is blown away. The eccentric weight is CNC manufactured from high-strength metal. EX620 125mm Orbital Polisher - 15mm Stroke Free-running 15mm orbital polisher EX620 with 125mm backing pad 5m cable 125mm backing pad Hex tool for changing the backing pad Heavy Cut Microfiber Polishing Pad Medium Cut Microfiber Polishing Pad Finishing Foam Polishing Pad Instruction manual Hex tool for changing the backing pad

Designed and manufactured for commercial and industrial use, ShineMate began marketing its 18V technology in 2019. With the EB351 battery excenter polisher, available from us as an official distributor in several variants and sets, a benchmark for battery-operated excenter polishers is set. The free-running excenter with a 125mm backing pad is both powerful and robust. With numerous features and carefully selected materials, ShineMate demonstrates the immense effort invested in design and manufacturing quality.Unmatched Powerful Battery Excenter with 125mm Backing PadPowered by a brushless electric motor, the polisher delivers 2,000 to 5,000 orbital rotations per minute. The lithium-ion batteries, with 2 included in both sets, have a capacity of 5Ah and allow for an operating time of about 45 to 60 minutes. The charger fully charges the batteries in approximately 60 minutes. The weight is 1.84kg without batteries. Depending on the model, the excenter stroke is either 12mm or 15mm.Perfect Ergonomics for Polishing PleasureThe housing of the EB351 battery excenter polisher is made from high-quality plastic with a rubberized soft grip for a secure hold in the grip and guidance areas. All materials are designed for maximum durability. The infinitely adjustable switch lever allows the adjustment of power in 6 stages, from spreading the polish, polishing to heavy cutting. The operation is initiated with a trigger switch that enables gentle startup. A locking button allows for constant operation. The backing pad is equipped with an advanced cooling system while blowing out any polish dust that may arise. The excenter weight is CNC-designed from high-strength metal. Whether the choice is the 12mm or 15mm stroke, both variants are optimized for minimal vibrations.Bare Kit, Charger Set, or Full Set: Variants for Cordless PolishingContents of the Bare KitFree-running battery excenter EB351Hex tool for changing the backing padContents of the Charger SetFree-running battery excenter EB351Two 5Ah 18V batteriesDual battery chargerHex tool for changing the backing padContents of the Full SetFree-running battery excenter EB351Two 5Ah 18V batteriesDual battery chargerNylon tool bag for all componentsHeavy Cut Microfiber Polishing PadMedium Cut Microfiber Polishing PadFinishing Foam Polishing PadHex tool for changing the backing pad

Perfect Ergonomics for Polishing Joy The EP820 rotary polisher is the latest corded innovation from the Asian manufacturer. This all-around rotary polisher from ShineMate delivers an enormous cut with high efficiency. Even deep scratches can be effortlessly removed. Enhanced Performance The EP820 features a highly precise double torque reduction system that surpasses conventional rotary polishers and is designed for long-term use. The rated power of the EP820 is 1,200W, with a maximum power consumption of 1,800W. Constant Speed With a finely tuned control unit, the rotation speed of the EP820 is kept constant, ensuring precise work. Controlled Startup The electronically controlled soft-start provides safety, prevents the flinging of polish paste, and extends the lifespan of the machine. 6-Stage Speed Adjustment The rotation speed of the EP820 can be varied in 6 stages from 700 to 2,500 RPM. Ergonomic Design The design of the EP820 has been further optimized compared to previous versions; it is now even more ergonomically shaped with a soft grip for comfortable holding and user-friendly operation. Scope of Delivery EP820 Rotary Polisher 125mm M14 Urethane Backing Plate with FlexEdge Technology

Flex XFE 2 15 Rotary Polisher Brushless 14-EC C 125/150 mm The Flex XFE 2 15 Rotary Polisher Brushless 14-EC C is the latest generation of powerful rotary polishers from Flex. Compared to its predecessor, this model has been significantly enhanced in key areas. The new brushless high-performance motor delivers more power, runs more efficiently, and ensures consistent high performance even under demanding polishing tasks. The 15 mm orbit guarantees high material removal with an excellent finish. 15 mm orbit for efficient paint correction and flawless finish Significantly increased motor power compared to previous model New ergonomic design for maximum control Latest generation brushless motor for efficiency and durability Optimized cooling system at the polishing pad reduces heat buildup 6-meter cable length for greater freedom of movement Free-spinning rotor ensures hologram-free paint surfaces Ideal for beginners and professionals alike Perfect for dealerships, detailing shops, and professional car care The noticeably higher motor power results from cutting-edge motor technology combined with the perfectly tuned 15 mm orbit. This combo delivers stronger torque, stable RPMs under load, and a uniform polishing result — ideal for professional use and effective hologram-free paint correction. Ergonomics also set new standards with the XFE 2 15: the newly developed design fits perfectly in the hand, reduces fatigue, and provides precise control. Especially during long polishing sessions with the powerful 15 mm orbit, users benefit from smooth, controlled operation. Another highlight is the optimized cooling system right at the polishing pad. This innovation effectively dissipates heat from the backing plate, pad, and paint surface. The result is longer working intervals, less thermal stress, and significantly better material protection — even during intensive polishing runs. For maximum practicality in professional daily use, the cable length was extended to 6 meters. This provides much more freedom of movement, reduces plug changes, and enables a smooth and efficient workflow in workshops, dealerships, or detailing studios. The scope of delivery for the Flex XFE 2 15 brushless 14-EC C is optimized for professional use and includes all essential components for immediate start: FLEX XFE 2 Polisher with 15 mm orbit Hex key for polishing pad change 150 mm polishing pad Manual and warranty conditions Not included is the 125 mm polishing pad, which can be purchased separately to adapt the machine to smaller areas or specific polishing tasks. The Flex XFE 2 15 brushless 14-EC C is the perfect choice for dealerships, professional detailers, and car care companies seeking a powerful rotary polisher with 15 mm orbit, excellent ergonomics, and uncompromising hologram-free results.

The Dynabrade DB8E is the result of a collaboration between US pneumatic tool expert Dynabrade and renowned detailer Renny Doyle. As one of the first specialty retailers in Europe, Chemical-Shark.de was able to extensively test this new forced-rotation dual action polisher. The verdict: impressive smoothness, massive torque power, and top-level working comfort. This complete kit includes the DB8E perfectly matched with polishes, pads, and towels for professional paint correction.Dynabrade DB8 – Technical Specs of the Forced-rotation PolisherForced-rotation dual action polisher (clockwise rotation)Powerful 1000-Watt motor with exceptionally smooth operation11 adjustable speed settings – up to 350 RPM rotary6.8 mm orbit for high defect correction with maximum controlBacking plates 125 mm and 150 mm includedSturdy 6 m power cable – ideal for workshop useDynabrade DB8E Complete Kit – What’s InsideDynabrade DB8E forced-rotation DA polisherBacking plates 5" (125 mm) and 6" (150 mm)AETERNO Zenit Pro Cut Compound polish 1000 gAETERNO Zenit Pro Finishing Polish 1000 gDetail Passion polishing pad 125 mm Foamed Hybrid Wool Heavy Cut Ø 140 mmDetail Passion polishing pad 125 mm Therminator Super Heavy Cut white Ø 125/135 mmDetail Passion polishing pad 125 mm Therminator Intermediate blue Ø 125/135 mmDetail Passion polishing pad 125 mm Therminator Medium Polish maroon Ø 125/135 mmDetail Passion polishing pad 125 mm Therminator Finish black Ø 125/135 mmDetail Passion polishing towel Tough 2Face Double40-420gsm icegreyDetail Passion polishing towel Tough 2Face Double40-420gsm seablueManual and user guideMaximum Smoothness & Control – No Compromise Even in the Complete KitThe Dynabrade DB8E delivers an unmatched combination of forced rotation with incredibly low vibration. Its state-of-the-art composite drive system offers direct power transfer with excellent control. The 6.8 mm orbit enables precise work—even on delicate paints or small parts—while still providing ample power reserve for tough, scratch-resistant clear coats.Perfectly Matched Polishing System for Cut and FinishAETERNO Zenit Pro Cut Compound tackles even deep defects, scratches, and heavy wash marks efficiently. Paired with the Foamed Hybrid Wool Heavy Cut pad or Therminator Super Heavy Cut pad, it delivers superb cutting power with controlled performance.AETERNO Zenit Pro Finishing Polish performs the refinement step flawlessly. Used with the Therminator Intermediate, Medium Polish, or Finish Pads, it effectively removes holograms, hazes, and fine swirls. The result is a deep gloss, hologram-free finish with maximum clarity.Professional Pads & Towels for Consistent ResultsThe included Detail Passion Therminator pads cover the full range from Super Heavy Cut to Finish. Their high shape stability and precise foam structure perfectly complement the DB8E’s forced rotation. The Foamed Hybrid Wool pad combines wool’s cutting edge performance with modern foam control—ideal for fast defect correction.The set is rounded off with premium Detail Passion Tough 2Face microfiber towels that safely remove polish residues and enable scratch-free buffing. Every stage—from aggressive cut to final shine control—is professionally covered.Ready to Go – Complete Kit for Maximum Paint CorrectionThis polisher complete kit offers a fully matched system for professional paint defect correction. Machine, polishes, pads, and towels work seamlessly together for efficient, safe, and repeatable results. Whether tackling heavy defects, dull paint, or fine micro-scratches—the Dynabrade DB8E complete kit arms you from the first sanding mark removal to the perfect finish.Get started now and experience professional paint correction at the highest level.

Flex PXE 80 Set Including Accessories Flex PXE 80 is the innovative mini polisher from German manufacturer FLEX Tools. The PXE 80 offers both rotary and random orbital modes for polishing and sanding tasks. The quick-change system allows fast swapping of drive modes and backing plates. Special microfiber and foam polishing pads from Detail Passion Padmanufaktur are specially made for the PXE 80 and listed under "Accessories" below. We stock polishes from top brands like Meguiar's, 3D Products, Sonax, Rupes, and Menzerna perfectly suited for this powerful polisher. Our expert team is happy to provide detailed advice. Why FLEX PXE 80 is the Ultimate Mini Polisher Supports rotary and free-running random orbital with 3 and 12 mm stroke Flexible and easy to use from swirl removal to hologram-free finishing with one tool Ideal complement for every detailer, painter, and spot repair professional Variable speed trigger with soft start and lock for continuous operation Speed control with 4 levels & LED indicators for clear feedback Ergonomic design with SoftGrip surfaces for versatile handling Thanks to vibration optimization, it runs incredibly smoothly Special cushioned hook-and-loop backing plates for polishing and sanding Includes bumper ring to protect vehicle surfaces Brushless motor delivers higher efficiency and longer lifespan Electronic Management System (EMS) protects the machine, extends life, and improves efficiency LED battery capacity indicator FLEX battery system compatible with all 12V battery packs Technical Specifications Max polishing pad diameter: 80 mm Max backing plate diameter: 75 mm Stroke length: 3 + 12 mm No-load speed: 400-2000 / 3000 / 4000 / 5000 RPM No-load stroke rate: 800-4000 / 6000 / 8000 / 11600 OPM Battery voltage: 12V Battery capacity options: 2.5 / 4.0 / 6.0 Ah Available FLEX PXE 80 Variants on Chemical-Shark.de Machine only without accessories 1 Flex PXE 80 mini polisher without batteries and charger Complete set including accessories, charger, case and batteries 1 Flex PXE 80 mini polisher without batteries and charger 1 Rotary adapter DT-P 1 Random orbital adapter 3 mm stroke DT-XF3 1 Random orbital adapter 12 mm stroke DT-XF12 1 Adhesive backing plate 30 mm BP-M/SR D30 PXE 1 Hook-and-loop backing plate 30 mm BP-M D30 PXE 1 Hook-and-loop backing plate 75 mm BP-M D75 PXE 2 Batteries 2.5 Ah AP 12/2.5 1 Charger CA 12/18.0 1 Transport case L-BOXX® 136 1 Case insert Note according to German Battery Act (BattG): Batteries must not be disposed of with household waste. End users are legally obliged to return used batteries. Returns are free of charge at municipal collection points or retailers. Battery type: Lithium-ion

The newly developed Rupes LHR15 Mark V polishing machine is the successor of the popular Mark III. It is the wired version of the HLR15 battery polishing machine, which Rupes introduced a few months earlier featuring a new gearbox and backing plate. It shares the drive unit and significantly improved running smoothness with this machine compared to its predecessor. Despite higher comfort, the machine is more powerful and now comes with a 9m cable. Completely newly developed free-running eccentric New anti-spinning ring Extreme running smoothness New gearbox technology LHR15 Mark V Bigfoot STD LHR15 MarkV Eccentric Polishing Machine Backing plate 125mm Delivered in a box including warranty card and manual

Developed and manufactured in the USA, Detail Passion's new "Angry Red Lake Pad" is here to deliver extreme cut with a brilliant gloss finish. Featuring a robust hook-and-loop backing, a heat-resistant and cooling prepolymer foam interface, topped with a blend of 100% lambswool infused with nano-polyester foam. This high-performance polishing pad works perfectly with rotary, dual-action, and forced dual-action polishers. Unmatched Performance for Professional Polishing of Modern Car Paints The blue foam interface measures about 9mm in height, with the hybrid wool layer at approximately 6mm, resulting in a total pad thickness of around 15mm. All foam materials and adhesives are solvent-resistant, ensuring maximum durability and resilience. Ideal for high-powered polishers like Flex, Rupes, and ShineMate. From Quick One-Step to Orange Peel Removal: The Purple Hybrid Wool Pad The "Angry Red Lake Pad" excels at fast cutting and correcting heavier paint defects, perfect for one-step polishing and orange peel removal. Compatible with free-running dual-action polishers like Rupes LHR15 Mark series, Flex XFE series, and forced dual-actions such as Flex XCE or Rupes LK900 Mille. Using it with rotary polishers boosts cut dramatically, enabling efficient orange peel removal. The stable hybrid wool structure minimizes energy loss during dual-action use. Compatible with modern polishes from brands like Sonax, Meguiar's, Koch Chemie, 3D, and Effectum. Available for 75mm and 125mm Backing Plates Produced under strict quality control by a US manufacturer holding a patent for the lambswool and nano foam blend manufacturing process. The pads come in 75mm and 125mm sizes; the 125mm version features a center hole for easier placement and improved cooling. Polishing pad offering extreme cut with a high-gloss finish Ultra-fast paint correction for car surfaces Highly efficient defect removal from one-step to orange peel Perfect for Rupes, Flex, and ShineMate polishers Compatible with free-running dual-action, forced dual-action, and rotary polishers Designed for exceptional durability and resistance Solvent and heat resistant Tear-resistant and shape-stable Available for 75mm and 125mm backing plates Fiber height approx. 6mm, foam interface approx. 9mm, total height approx. 15mm Availability and More Information The "Angry Red Lake Pad" will be in stock between February and March 2022. Use the notification feature to stay updated. Whether this hybrid wool pad matches similarly looking pads cannot be confirmed or denied. An application video will be released here in January.

The new Intermediate polishing pads from Detail Passion are based on the proven technology of thermally stable or heat-resistant foam. Designed for one-step polishing tasks and correcting paint defects on softer clear coats like Tesla, Harley Davidson, Dodge, or Asian manufacturers. The blue Therminator pads feature an ultra-fine open cell foam structure, offering a perfect balance between fast cut and excellent finish. Precisely classifying the blue Intermediate foam in the existing foam lineup is challenging. Often, this pad delivers the cut power of the orange foam and the finish quality of the very soft black foam. Tests have shown that the Intermediate Therminator pads also provide perfect results when refining PPF paint protection films. With the DP Pro Therminator polishing pads, German manufacturer Detail Passion taps into the hype around thermally stable or heat-resistant pads while injecting unique innovations. The benefit is clear: consistent paint and clear coat removal during polishing since the foam maintains its compression hardness under heat. This ensures pressure stability at higher speeds and prevents loss of cutting power. The cell structure remains intact for optimal cooling and minimal compression. DP Pro Therminator white - Super Heavy Cut for severe paint defects DP Pro Therminator orange - Medium Cut for one-step, all-in-one, or medium polish DP Pro Therminator maroon - Medium Polish for moderate polishing and finishing DP Pro Therminator blue - Intermediate One Step, soft clear coats, film refining DP Pro Therminator black - Gloss finish for delicate paints or extreme shine From Super Heavy Cut to High Gloss Finish: DP Pro Therminator Pads for Rotary and Dual Action Use Unlike other thermally stable foam pads, DP Pro Therminators emphasize cell structure and polish distribution. Conventional thermopads often distribute polish unevenly or not at all during start or spread, leading to unwanted dry spots, especially with medium-firm pads. Optimized for long-throw dual action polishers like Rupes LHR15, ShineMate EX620, Makikato POC, and Flex XFE, these pads deliver a fast cut or a high-gloss finish depending on your choice. Use DP Pro Therminator pads standalone or combined with heavy-cut pads made from hybrid wool or microfiber for comprehensive correction.

Detail Passion Therminator+ Polishing Pads Action-Pack+ – Complete Set for Ultimate PerformanceThe Detail Passion Therminator+ Polishing Pads Action-Pack+ gives you the perfect entry into the world of high-end polishing pads. This cost-effective bundle includes all three foam varieties – Cutting, Medium, and Finish – available for 75mm or 125mm backing plates. Perfectly tailored for modern dual-action polishers, this set delivers maximum efficiency, perfect control, and a consistent polishing system all from one source.Complete set of Cutting, Medium, and Finish padsAvailable for 75mm or 125mm backing platesIdeal for dual-action and forced dual-action polishersOptimized eccentric stroke transferThermally stabilized high-performance foamsInnovative interface pad for maximum controlCenter hole for improved heat dissipation, even on 75mm versionAttractive price advantage over individual purchaseMade in GermanyInnovative Interface Pad – Maximum Power Transfer, No Pseudo EffectsThe specially designed interface pad of the Therminator+ polishing pads follows a clear principle: maximum and loss-free transfer of the dual-action motion. While many polishing pads rely on soft structures to damp vibrations or for supposed cooling – often with noticeable performance loss – Detail Passion focuses on real performance.A stiff, deliberately heavier interface foam minimizes energy loss through deformation and transfers oscillation almost fully onto the paint surface. This results in higher material removal, stable rotation, and a consistent finish rather than mere subjective comfort effects.Damping occurs only where it makes sense: The gray interface reduces vibrations via a special open-cell structure – without compromising crucial power transfer.Therminator+ Foam – Maximum Performance for Every ApplicationThe polishing pads of the Therminator+ series use exclusively developed high-performance foams that maintain their structure and hardness even under extreme conditions. They are thermally stable, chemically resistant, and fully regenerative. Thanks to maximum power transfer combined with minimized vibration, softer polishing foams can be used without sacrificing material removal. This ensures unprecedented comfort and a noticeably enhanced finish across all foam types.Blue (Cutting): High material removal with surprisingly good finish – ideal for heavy cut and one-stepOrange (Medium/Finish): Newly developed formula for perfect balance between cut and glossBlack (Finish): Additivated foam for maximum deep glossThe blue and black foams are proven classics from the Therminator series. The orange foam, however, has been completely redeveloped for the Therminator+ series and is intentionally not comparable to the previous orange foam. Together with the interface technology, the blue foam delivers an impressive combination of cut and finish, reducing many work steps.Optimal Height and Thermal StabilityWith an overall height of approx. 28mm, including 8mm interface pad, the Therminator+ polishing pads provide ideal conditions for consistent performance even under heavy loads. The increased height ensures better heat distribution and prevents overheating during long polishing sessions.Center Hole for Maximum Cooling on Modern MachinesA key advantage of Therminator+ polishing pads is the integrated center hole. Especially for modern 75mm battery-powered polishers from Mirka, ShineMate, and Kovax with brushless motors and speeds up to 8000 RPM, it enables efficient heat dissipation. This protects both the pad and the paint surface, significantly extending service life.Compatibility and ApplicationTherminator+ polishing pads are compatible with leading machines from Rupes, Flex, ShineMate, Liquid Elements, Makita, Mirka, and Kovax. They are suited for professional detailers and ambitious enthusiasts demanding top-quality pads – the Action-Pack+ equips you optimally for every polishing step.Made in Germany – Uncompromising QualityThe interface technology has been intensively developed and perfected by Detail Passion. Production is fully carried out in Germany under stringent quality standards. The result is a durable, high-performance polishing pad system that impresses in any situation.

German brand Detail Passion taps into the hype around thermal stable polishing pads with their DP Pro Therminator line, adding unique innovations. Thermal stability means consistent paint and clear coat removal during polishing as the foam doesn’t lose density from heat. This keeps pressure steady at higher speeds, preventing cutting power drop-off. The cell structure is also preserved for optimal cooling and minimized pad compression. Building on experience with high-speed heavy cut polishes like 3D Car Care 510 and versatile 3D One Hybrid, Detail Passion gives these pads special advanced features. DP Pro Therminator white - Super Heavy Cut for severe paint defects DP Pro Therminator orange - Medium Cut for One Step, All-in-One or moderate polishes DP Pro Therminator maroon - Medium Polish for medium polishes and finishing DP Pro Therminator black - Gloss finish for sensitive paints or extreme gloss From Super Heavy Cut to Finish: DP Pro Therminator Pads for rotary & dual-action use Unlike other thermal stable pads, DP Pro Therminators focus on cell structure and polish distribution. Conventional thermopads often cause uneven or no polish spread during contact, causing mid-hard pads to dry out quickly. These pads are optimized for long-stroke dual action machines like Rupes LHR15, ShineMate EX620, Makita POC, Flex XFE, delivering fast cut or glossy finish depending on choice. They perfectly complement hybrid wool or microfiber heavy cut pads or work as standalone solutions.

The DP Pro Therminator polishing pads from German manufacturer Detail Passion embrace the hype around thermally stable or heat-resistant pads while adding their unique innovations. These pads ensure consistent paint and clear coat removal during polishing by maintaining foam hardness despite heat. This allows sustained pressure even at high speeds without loss of cutting power. The cell structure is preserved, optimizing cooling and minimizing compression. Building on experience with fast heavy cut polishes like 3D Car Care 510 and versatile 3D One Hybrid, Detail Passion has added special features to their polishing foam.DP Pro Therminator white - Super Heavy Cut for severe paint defectsDP Pro Therminator orange - Medium Cut for One Step, All-in-One or medium polishesDP Pro Therminator maroon - Medium Polish for medium polishes and finishingDP Pro Therminator black - Gloss finish for delicate paints or extreme glossFrom Super Heavy Cut to Finish: DP Pro Therminator Pads for Rotary and Dual-Action UseUnlike other thermally stable pads, DP Pro Therminator prioritizes cell structure and polish distribution for even coverage. Conventional thermo pads often cause uneven or no polish distribution during application, especially with medium-hard pads, risking premature drying. Optimized for large throw dual-action polishers like Rupes LHR15, ShineMate EX620, Makikato POC, and Flex XFE, these pads deliver impressively fast cutting or a high-gloss finish depending on the chosen type. They can be combined with Hybrid Wool or microfiber heavy cut pads or used alone as a complete system.

The DP Pro Therminator polishing pads by German brand Detail Passion tap into the buzz around thermally stable or thermo-resistant pads while delivering unique innovations. The key benefit of thermally stable pads is consistent and controlled paint or clear coat removal during polishing, as the foam does not lose density from heat. This allows sustained pressure and cutting power even at high speeds without drop-off. The cell structure remains intact, ensuring optimal cooling and minimizing foam compression. Building on experience with aggressive heavy cut polishes like 3D Car Care 510 and versatile 3D One Hybrid, Detail Passion engineered special properties into the foam.DP Pro Therminator white - Super Heavy Cut for severe paint defectsDP Pro Therminator orange - Medium Cut for One Step, All-in-One, or medium polishesDP Pro Therminator maroon - Medium Polish for moderate polishing and finishingDP Pro Therminator black - Gloss finish for sensitive paints or extreme shineFrom Heavy Cut to Finish: DP Pro Therminator Pads for Rotary & Dual Action UseUnlike other thermally stable foam pads, DP Pro Therminator pads focus on cell structure and polish distribution. Conventional thermo pads tend to distribute polish unevenly or not at all during start-up or spreading, which can cause pads to dry out quickly, especially medium-firm types. DP Pro Therminator pads are optimized for large orbit dual action machines like Rupes LHR15, ShineMate EX620, Makikato POC, Flex XFE delivering either fast cut or ultra-gloss finish depending on the variant. They can be paired with heavy cut hybrid wool or microfiber pads or used alone as a complete solution.

The German brand Detail Passion captures the hype around thermally stable polishing pads with their DP Pro Therminator line, adding their own unique innovations. The key benefit of these heat-resistant pads is consistent, controlled paint and clear coat removal during polishing, as the foam doesn't lose its firmness under heat. This ensures pressure remains stable even at high RPMs, preventing cut performance drop-off. The closed-cell structure also optimizes cooling and minimizes pad compression. Based on experience with aggressive 3D Car Care 510 Heavy Cut and versatile 3D One Hybrid polishes, Detail Passion has fine-tuned the foam's properties.DP Pro Therminator white - Super Heavy Cut for severe paint defectsDP Pro Therminator orange - Medium Cut for one-step, all-in-one, or moderate polishesDP Pro Therminator maroon - Medium Polish for medium cuts and finishingDP Pro Therminator black - Gloss finish for delicate paints or extreme shineFrom Super Heavy Cut to Glazing: DP Pro Therminator Pads for Rotary and Dual-ActionUnlike other thermally stable pads, DP Pro Therminator pads prioritize cell structure and polish distribution. Conventional thermal pads can cause uneven or insufficient polish spread, especially during startup, leading to dry buffing—especially with medium-firm pads. Optimized for long throw DA polishers like Rupes LHR15, ShineMate EX620, Makikato POC, Flex XFE, the Therminator pads deliver either rapid cutting or a deep gloss finish depending on the variant. They can be paired with heavy cut hybrid wool or microfiber pads or used alone as a complete solution.

Detail Passion Therminator+ Polishing Pad Action-Pack+ – Complete Set for Maximum Performance The Detail Passion Therminator+ Polishing Pad Action-Pack+ is your perfect entry into the world of high-end polishing pads. This value-packed bundle includes all three foam types – Cutting, Medium, and Finish – available for 75mm or 125mm backing plates. Tailored for modern dual-action polishers, this set delivers maximum efficiency, precise control, and a seamless polishing system from one source. Complete set of Cutting, Medium, and Finish pads Options for 75mm or 125mm backing plates Perfect for dual-action and forced rotation polishers Optimized eccentric stroke transfer Thermally stabilized high-performance foams Innovative interface pad for superior control Center hole ensures better heat dissipation even in 75mm version Attractive price advantage compared to single purchases Made in Germany Innovative Interface Pad – Maximum Power Transfer without Compromise The specially designed interface pad of the Therminator+ polishing pads follows a clear principle: maximum and low-loss transmission of the orbital movement. While many pads rely on soft structures to dampen vibrations or provide fake cooling – often resulting in noticeable power loss – Detail Passion focuses on real performance. A stiff, deliberately heavier interface foam minimizes energy losses from deformation and transfers the oscillation almost entirely to the paint surface. This results in higher cut, stable rotation, and an even finish rather than just subjective comfort effects. Targeted damping is applied only where it makes sense: The grey interface reduces vibrations via a special open-cell structure – without affecting crucial power transfer. Therminator+ Foams – Peak Performance for Every Application The Therminator+ polishing pads use exclusively developed high-performance foams that maintain their structure and hardness even under extreme conditions. They are thermally stable, chemically resistant, and fully self-regenerating. Thanks to maximum power transfer with minimal vibration, softer polishing foams can be used without sacrificing cut. This enables unprecedented comfort and significantly improved finishes across all foam types. Blue (Cutting): High cut with surprisingly good finish – ideal for heavy cutting and one-step polishing Orange (Medium/Finish): Newly developed blend for perfect balance between cut and gloss Black (Finish): Additive foam for maximum deep gloss The blue and black foams are proven from the Therminator series. The orange foam was completely newly developed for the Therminator+ series and is purposefully not comparable to previous orange foams. Combined with the interface technology, especially the blue foam delivers an impressive blend of cut and finish, reducing many work steps. Optimal Thickness and Thermal Stability With a total height of about 28mm, including an 8mm interface pad, the Therminator+ polishing pads offer ideal conditions for consistent performance even under heavy use. The increased thickness improves heat distribution and prevents overheating, even during long polishing sessions. Center Hole for Maximum Cooling on Modern Machines A key advantage of the Therminator+ polishing pads is the integrated center hole. Especially on modern 75mm cordless polishers from Mirka, ShineMate, and Kovax with brushless motors and speeds up to 8000 rpm, it enables efficient heat dissipation. This protects both the pad and paint surface, significantly extending service life. Compatibility and Application Therminator+ polishing pads are compatible with leading machines from Rupes, Flex, ShineMate, Liquid Elements, Makita, Mirka, and Kovax. They suit both professional detailers and ambitious enthusiasts who demand the best from their polishing pads – and with the Action-Pack+, you are perfectly equipped for every polishing step. Made in Germany – Quality Without Compromise Detail Passion has extensively developed and perfected the interface technology. Manufacturing takes place entirely in Germany under strict quality standards. The result is a durable, high-performance polishing pad system that convinces in every scenario.

3D ACA X-TRA 500 is an innovative cutting polish designed for HeavyCut and MediumCut applications. Known as 3D 500, this polish is produced by 3D Products in the USA. With 3D 500, paint defect corrections can be made in no time. The product contains advanced "Alpha Ceramic Alumina" polishing particles that allow for significantly longer working time. 3D 500 is suitable for both soft single-layer paints and hard clear coats. It is free from fillers and can be completely removed even with mild paint degreasers. High Cut and Gloss Level with 3D ACA X-TRA 500 3D 500 can be applied using rotary or eccentric machines, leaving a very glossy finish for a HeavyCut polish without hazing. Ideally, 3D 500 is used before a finishing polish such as 3D ACA X-TRA 520, 3D One Hybrid, or any comparable polish. 3D ACA 500 becomes clear after a short working time, allowing a good view of the paint surface. 3D 500 is characterized by a very long working time and is economical due to the late breaking down of the polishing particles into smaller particles. Easy to Use: 3D ACA X-TRA 500 3D 500 is solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 500 does not create dust and can be easily wiped off. It is recommended to use 3D sparingly to avoid any excess. We recommend using microfiber pads, wool pads, and hard to medium-hard foam pads with 3D. Due to its high viscosity, 3D 500 does not splash even at high RPMs.

3D ACA X-TRA 510 is a cutting-edge paint polish designed for Heavy Cut applications. This polish can be used with both rotary and dual-action polishers. As known from other 3D polishes, it has an extended working time. It works faster than the 3D 500 on severe paint defects. 3D 510 contains innovative 'Alpha Ceramic Alumina' abrasive particles, allowing for a significantly longer processing time. It is suitable for both soft single-layer paints and hard clear coats. 3D 510 is free from fillers and can be completely removed even with gentle paint degreasers. High Material Removal in No Time with 3D ACA X-TRA 510 3D 510 can be used both excentrically and rotationally, leaving a gloss finish typical for Heavy Cut polishes without dulling. Ideally, 3D 510 is used before a finishing polish like the 3D ACA X-TRA 520, 3D One Hybrid, or a comparable product. 3D ACA 510 becomes clear after a short processing time, allowing for good visibility on the paint. It features a very long working time and is economical due to the late breakdown of the abrasive particles into smaller fragments. Very Easy Application: 3D ACA X-TRA 510 3D 510 is solvent-free, kerosene-free, and filler-free. Despite its eco-friendly and user-friendly formulation, 3D 510 does not produce dust and can be easily wiped off. It is advisable to use 3D sparingly to avoid excess. We recommend using it with microfiber pads, wool pads, and hard to medium-soft foam pads. Thanks to its high viscosity, 3D 510 does not spray even at high RPMs.

3D Speed combines the cutting and shining properties of 3D One Hybrid with a high-quality synthetic wax sealant. Also known in forums and by the US mail order company "Autogeek" as 3D HD Speed, it can be processed both rotationally and eccentrically. As with other 3D polishes, the polish can be spread for an extended period. Despite its temperature-resistant wax component, 3D Speed can be easily wiped off. 3D Speed contains innovative "Alpha Ceramic Alumina" polish bodies that allow for a significantly longer processing time. 3D Speed is suitable for both soft single-layer paints and hard clear coats. Although 3D Speed is designed as a standalone polish and sealant, it can also be used as a glaze before sealing with natural waxes, polymer products, or Teflon sealants. 3D Speed: Universal Polish for Quick Detailing 3D Speed can be used universally for correcting light scratches. The polish is also suitable for a multi-step process with subsequent sealing. Typically, in multi-step applications, previous 3D polishes such as One Hybrid or the heavy cut polishes 500 or 510 are used. 3D Speed consistently delivers a high depth gloss. Insider Tip for Maximum Shine on Solid Colors! Although we generally advise against polishes with filling and covering properties before applying ceramic coatings, it is possible to use 3D Speed for high gloss finish polishes. Especially on solid-colored paints, the depth gloss of 3D Speed is unparalleled. In this case, however, thorough de-greasing is necessary.

AETERNO Zenit Pro All-in-One Polish with Sealant – Perfect Paint Care in One Step This effective polish and long-lasting protection in a single product – the AETERNO Zenit Pro All-in-One Polish with Sealant combines powerful polishing agents with a protective sealant. Designed for used car detailing, the care of sensitive paints, or as an optimal preparation for wax, this innovative polish offers a flawless finish with brilliant color depth while leaving a resilient protective layer that preserves the paint from environmental influences. All-in-One Formula: Polish and sealant in one product for efficient paint preparation. Perfect for Sensitive Paints & Classic Cars: Gentle abrasives prevent paint removal and provide brilliant shine. Ideal for Used Car Care: Removes light scratches, holograms, and brings the paint to high gloss. Preparation for Waxes or Standalone Protection: Leaves a long-lasting protective layer. Easy Wipe-Off: Quick and effortless to polish out without greasy residues. Silicone-Free: Safe for paint shops and professional applications. Gentle Paint Correction with Protective Features AETERNO Zenit Pro All-in-One Polish with Sealant is ideal for sensitive paints and classic cars, where a particularly gentle polish is required. The fine abrasives remove light paint defects without unnecessarily degrading the surface while the integrated sealant provides a deep shine and protective barrier against dirt, UV radiation, and environmental influences. Versatile Application & Effortless Processing Whether for used car detailing, as a quick one-step polish, or as a finish for well-maintained paints – this product offers maximum flexibility. Thanks to the silicone-free formula, the polish is also suitable for use in paint shops. The particularly easy wipe-off behavior facilitates work and leaves a streak-free, clear finish. Protection and Shine in One Step With its integrated sealant, the AETERNO Zenit Pro All-in-One Polish with Sealant can be used as standalone protection or as a base for waxes and additional protective layers. The protection layer created preserves the paint from external influences and ensures a long-lasting, smooth surface with excellent color depth.

AETERNO Zenit Pro All-in-One Polish & Sealant – Perfect Paint Care in One Step Powerful paint polish and long-lasting protection combined – the AETERNO Zenit Pro All-in-One Polish & Sealant blends strong cutting agents with a protective sealant. Designed for used car detailing, delicate paint care, or as the perfect wax prep, this innovative polish delivers a flawless finish with brilliant depth. Despite its high cut, it provides exceptional finish quality, creating an incredible clear shine with intense light reflection even on light paints. At the same time, it leaves a durable protective layer that guards the paint against environmental damage. All-in-One Formula: Polish and sealant combined for efficient paint correction. High Cut with Finish Character: Visible defect removal with a brilliant surface. Outstanding Shine on Light Paints: Crystal-clear reflection and striking depth effect. Perfect for Delicate Paints & Classics: Gentle abrasives prevent unnecessary paint removal. Ideal for Used Car Detailing: Removes light scratches, holograms, and boosts gloss. Prepares for Waxes or Solo Protection: Leaves a long-lasting protective layer. Easy Wipe-Off: Polishes out quickly without greasy residues. Silicone-Free: Safe for paint shops and professional use. Gentle Paint Correction with Protective Function AETERNO Zenit Pro All-in-One Polish & Sealant is ideal for sensitive paints and classic cars needing gentle polishing. Modern abrasives deliver high correction with an exceptionally fine finish. Even on sensitive or light uni and metallic paints, it creates an even, hologram-free gloss with impressive clarity. The built-in sealant also forms a protective barrier against dirt, UV rays, and environmental impacts. Optimal Performance with Large-Throw Polishers & Premium Pads The polish unfolds its full potential especially on large-throw dual action polishers from 12mm stroke. Paired with specially designed pads like the Detail Passion Therminator+ or Lake Country HDO Pads, it achieves an impressive balance of defect correction and high-gloss finish. Efficient force transfer of modern large-throw machines speeds up work while the matched pad structure ensures crystal-clear, even surface results. Versatile Use & Effortless Application Perfect for used car detailing, as a fast one-step polish, or finishing well-maintained paints – this product offers maximum flexibility. Its silicone-free formula makes it ideal for paint shops as well. The easy wipe-off behavior simplifies work and leaves a streak-free, clear result with visible gloss boost. Protection and Shine in One Step Thanks to the integrated sealant, AETERNO Zenit Pro All-in-One Polish & Sealant can be used as sole protection or as a base for waxes and additional sealants. The protective layer preserves the paint from external influences and ensures a long-lasting, smooth surface with excellent depth and stunning light reflection.

DIY Detail Gold Standard Polish – Spray Polish for Flawless Finishing The DIY Detail Gold Standard Polish is an innovative spray polish designed specifically for defect correction. It efficiently removes fine swirls, light scratches, and towel marks, delivering a mirror-like reflection on the paint. Thanks to the spray formula, the polish can be applied evenly, making it more economical and optimally saturating the polishing pad. Easy Application & Perfect Polishing Results Just one to two sprays is enough to evenly moisten a polishing pad. By using a low speed on the polishing machine (Rotary Polisher: 400–800 RPM, Dual Action: Speed Level 3–4) and gentle overlapping movements, the best results are achieved. The polish residues can be effortlessly wiped off with a microfiber cloth, leaving a shiny, streak-free surface. If the polishing pad is saturated with residues, it can either be cleaned or replaced with a fresh one. Perfect Combination with Detail Passion Polishing Pads The Gold Standard Polish pairs perfectly with the high-quality Detail Passion Polishing Pads, designed for maximum performance and flawless polishing results. This combination enables effective paint correction with minimal material usage. For Professionals & Enthusiasts This polish is safe for all glossy paints, including clear coats, and provides a user-friendly solution for professionals and enthusiasts alike. With the Gold Standard Polish, polishing is taken to the next level. It allows for quick and effective defect correction for a flawless, deep gloss finish.

SONAX PROFILINE PerfectFinish 4-6 – High-Performance Polish for Deep Gloss Finish The SONAX PROFILINE PerfectFinish 4-6 is a professional finish polish and hologram-free polish designed specifically for removing medium defects. With its balanced cutting performance, it is ideal for use as a 1-step polish, providing a high-gloss, hologram-free result. Finish Polish with Cut: Effectively removes medium scratches, swirls, and sanding marks (P2000 and finer) Excellent Wipe-off Behavior: Easy to polish out without streaks or residues Sealant Preparation: Perfect as a preparation for ceramic coatings like Gtechniq Crystal Serum or Nordic Pro Coatings Perfect Finish with Hologram-Free Effect As a high-quality hologram-free polish, the PerfectFinish 4-6 impresses with its fine abrasives that reliably eliminate light refractions, polishing shadows, and micro-scratches. The result is a mirror-like, deeply glossy finish – especially on dark or sensitive paints like solid black. Efficient and User-Friendly Thanks to its excellent working properties, this polish can be effortlessly polished out. The easy wipe-off behavior saves time and ensures a clean result – perfect for professional vehicle detailers and dedicated enthusiasts. Finish Polish as Ideal Base for Coatings The SONAX PROFILINE PerfectFinish is not only a finish polish but also the perfect foundation for high-quality ceramic sealants. Coatings like Gtechniq Crystal Serum or Nordic Pro Coatings adhere optimally to the smoothed, silicone-free surface and unleash their full protective power. Pad Recommendation for Best Results For maximum effect, high-quality polishing pads such as the Detail Passion Therminator Intermediate (blue) for balanced defect correction or the Therminator Finish (black) for the final high-gloss finish are recommended. Both pads are optimally matched to the properties of PerfectFinish. Safe on Solid Black with Proper Degreasing Especially on sensitive or deep black solid paints, thorough degreasing with SONAX Prepare should be done after polishing. This ensures that polish residues are reliably removed and the subsequent sealant can adhere optimally – for a streak-free, long-lasting result. Alternative Polish with More Cut If you're looking for more cutting power with lower consumption, consider the 3D One Hybrid 400 Polish. This hybrid polish offers more cut and is ideal for heavily used paints while still delivering a fine finish.