Wheel Coatings – Long-lasting Protection for Your Wheels

Gtechniq + EZ Detail Coat & Clean Kit Wheel Protection & Brush Gtechniq Wheel Armour C5 is a silicone-based ceramic coating for automotive wheels. Wheel Armour C5 has been developed by Gtechniq with a strong focus on brake dust resistance and other contaminants on wheels. Wheel Armour is suitable for all types of coated wheels. On the surface, a microstructure forms that provides high resistance to stains and environmental influences. Thanks to the chemical bond of the silicone formula with the wheel surface, Wheel Armour is extremely durable. With Wheel Armour C5, you protect your wheels and make cleaning easier. Aggressive wheel cleaners are no longer needed; typically, wheels can be cleaned with a mild foam cleaner (SnowFoam) and a pressure washer. Ceramic protection for coated wheels, brake calipers, and exhaust tips High dirt resistance and easy cleaning Durability of up to 2 years Consumption advice: The following notes are a guideline. Generally, 30ml is enough for at least 2 large sets of tires with appropriate practice! 15 ml of Wheel Armour C5 is sufficient for the front surface of one set of 17-inch wheels. 30 ml of Wheel Armour C5 is enough for the front and inner surfaces of one set of 20-inch wheels. EZ Detail Brushes are arguably the best nylon wheel brushes for cleaning wheels. The patented special nylon, known as Nylex, provides extremely soft bristles. Scratches are excluded with proper use. The brush has been exclusively manufactured in the USA for many years, superior in quality and safety compared to wheel brushes from the Far East. If you're looking for the best wheel brush with bristles for car care, we recommend the original from EZ Detail. EZ Detail Wheel Brushes: Thoughtful Quality for Wheel Cleaning EZ Detail Speed Master Wheel Brush is available in two lengths and in red and blue: 33 cm and 45 cm. It is a highly developed wheel cleaning brush that safely removes brake dust and general road grime from wheels. For particularly gentle cleaning, the bristles at the end are split in a sophisticated process, the handle is bendable and coated with a protective plastic sheath. Even against strong wheel cleaners, the Daytona Speed Master Wheel Brush is chemically resistant, allowing it to free your wheels from harmful brake dust for many years. Especially for road contaminants like oil, tar, or other sticky substances, a bristle brush is preferred over a microfiber brush. This is especially true for off-road vehicles and SUVs due to its design. EZ Detail Speedmaster Brushes: The Original at Chemical-Shark.de Chemically resistant wheel brush Gentle bristles with split ends Coated handle for safe use Available in red or blue Overall length of the small variant: 33cm Length of brush head: 16.5cm Diameter of brush heads: 6cm

Gtechniq GT1 Ceramic Coating Set – The Allround Ceramic Shield for Almost All Vehicle Surfaces What was barely imaginable a few years ago is now reality: with the Gtechniq GT1 Ceramic Coating Set, there's now a thoughtfully designed complete kit for ceramic coating of nearly every exterior vehicle surface. Instead of using different products for paint, plastic, glass or paint protection films, GT1 covers almost all relevant surfaces. This makes application easier than ever and offers both beginners and pro detailers a hassle-free entry into modern ceramic coating. Complete kit for ceramic coating of almost all exterior surfaces Suitable for paint, plastic, paint protection film (PPF), glass and wheels Simple single-layer application without complicated steps Also suitable for outdoor use Up to 12 months long-lasting protection Perfect as an allround ceramic shield for beginners and enthusiasts Includes panel wipe, microfiber cloths, applicator, gloves and instructions One Ceramic Coating for Almost Every Surface GT1 Ceramic Coating is engineered to significantly reduce detailing effort. Its innovative formula adheres reliably to paint, plastic parts, paint protection films (PPF), glass and wheels, creating a durable protective layer against environmental damage, UV rays, dirt and water. Thanks to its universal use, just one product is enough to permanently protect nearly the entire vehicle. Saves time, simplifies product choice and ensures a uniform finish on all treated surfaces. Easy Application with Professional Results Gtechniq GT1 bridges the gap between classic paint sealants and professional high-end ceramic coatings. The single-layer application is designed simple and requires no special tools or controlled environment. Even ambitious beginners can achieve top-tier results with this complete kit. After thorough prep, the coating is evenly applied, forming a smooth, water-repellent surface with impressive chemical and weather resistance. The Complete Ceramic Coating Set for Immediate Use The set includes everything needed for application. Besides the 50 ml GT1 ceramic coating, it contains a 100 ml panel wipe for optimal surface prep, an AP5 microfiber applicator, several premium microfiber towels, protective gloves and detailed instructions. So you can start sealing right after prepping your vehicle—no extra accessories required. The Ideal Allround Ceramic Coating for Modern Car Care Whether a new car, daily driver or lovingly cared-for enthusiast vehicle, the Gtechniq GT1 Ceramic Coating Set offers an exceptionally versatile solution for long-term vehicle protection. Combining easy application, universal surface compatibility and durable protection, GT1 is a modern allround ceramic coating that makes getting into premium ceramic finishes easier than ever. A complete set that meets nearly all demands of contemporary vehicle sealing.

Gtechniq Wheel Armour C5 is a silicon-based ceramic coating designed for car wheels. Developed by Gtechniq with a focus on repelling brake dust and other contaminants on wheels, Wheel Armour is suitable for all types of coated rims. The surface forms a microstructure that provides exceptional resistance to stains and environmental factors. The chemical bond of the silicon formula with the wheel surface makes Wheel Armour extremely durable. With Wheel Armour C5, you protect your wheels and make cleaning easier. Aggressive wheel cleaners are no longer needed; usually, wheels can be cleaned with a mild foam cleaner (SnowFoam) and a pressure washer. Ceramic protection for coated wheels, brake calipers, and exhaust tips High dirt repellency and easy cleaning Longevity of up to 2 years Consumption note: The following indications are an approximate guide. Generally, 30ml is sufficient for at least 2 large sets of tires with some practice! 15ml of Wheel Armour C5 is enough for the front surface of one set of 17-inch wheels. 30ml of Wheel Armour C5 is enough for the front and inner surfaces of one set of 20-inch wheels.

Wheels and tires are exposed to extreme dirt due to their proximity to the road and brakes. Additionally, cleaning wheels can be challenging because the wheel bed is hard to reach and the front has small areas, spokes, and grooves. A durable, dirt-repellent non-stick coating is essential to keep wheels cleaner for longer and simplify the cleaning process. Gtechniq Wheel Coating Kit The Wheel Coating Kit from a leading manufacturer of protective coatings includes everything needed for wheel coating. Gtechniq Wheel Armour C5 is specifically designed for alloy wheels and brake calipers. It is an extremely durable ceramic coating that withstands temperatures up to 600 degrees Celsius. 250ml Panel Wipe Degreaser for cleaning 30ml C5 Wheel Armour 3 x MF1 ZeroR Microfibre Buff Cloth

Gtechniq Wheel Armour C5 is a silicon-based ceramic coating for car wheels. Developed by Gtechniq with a strong focus on brake dust repulsion and contamination prevention on wheels, Wheel Armour is suitable for all types of coated wheels. A microstructure forms on the surface, ensuring high resistance to stains and environmental influences. Due to the chemical bond of the silicon formula with the wheel surface, Wheel Armour is extremely durable. With Wheel Armour C5, you protect your wheels and make cleaning easier. Aggressive wheel cleaners are no longer necessary; typically, wheels can be cleaned with a mild foam cleaner (SnowFoam) and a pressure washer. Ceramic protection for coated wheels, brake calipers, and exhaust tips High dirt resistance and easy cleaning Durability of up to 2 years Consumption advice: The following guidelines are a rough estimate. 30ml is generally sufficient for at least 2 large sets of tires with some practice! 15 ml of Wheel Armour C5 is enough for the front surface of a set of 17-inch wheels. 30 ml of Wheel Armour C5 is enough for the front and inner surfaces of a set of 20-inch wheels.

GYEON Q2 Rim EVO Ceramic Wheel Sealant GYEON Q2 Rim EVO is a high-temperature resistant SiO2 ceramic coating designed specifically for heavily stressed wheel surfaces. The EVO generation impresses with enhanced chemical resistance, optimized adhesion, and extended durability. Wheels are constantly exposed to high heat, brake dust, and harsh cleaners – this powerful protective formula tackles these challenges. After curing, it forms a durable, hydrophobic layer that significantly reduces dirt buildup. SiO2 ceramic coating for wheel surfaces High heat resistance under intense brake stress Strong hydrophobic and self-cleaning effect Excellent chemical resistance to brake dust Suitable for painted, powder-coated, and anodized wheels Long-lasting protection with proper application The highly water-repellent surface drastically reduces brake dust adhesion, making cleaning much easier. Wheels stay cleaner longer and aggressive cleaning methods can be minimized. GYEON Q2 Rim EVO helps preserve the value of premium wheel sets and ensures a consistently maintained, protected look – even under demanding driving conditions.

LUMINUS IRON Armor Sealant Metal & Wheels – Tough Protection for High-Stress Surfaces The LUMINUS IRON Armor Sealant for Metal & Wheels is specially designed to reliably protect heavily stressed vehicle parts. The powerful formula creates a durable protective layer on metal and wheel surfaces that effectively guards against brake dust, road grime, moisture, and other environmental influences. This keeps wheels and metal parts cleaner for longer and makes cleaning much easier. Specifically developed for wheels and metallic surfaces Protects against brake dust, dirt, and environmental impacts Strong water- and dirt-repellent properties Significantly simplifies regular cleaning Durable and long-lasting protective layer Maximum Protection Against Brake Dust and Dirt Wheels are exposed to extreme stress. IRON Armor Sealant significantly reduces adhesion of baked-on brake dust and aggressive contaminants, preventing dirt from settling permanently and damaging the surface. Hydrophobic Effect for Cleaner Surfaces The sealed surface effectively repels water and dirt. Thanks to the hydrophobic effect, liquids bead off easily, removing loose particles in the process. This not only enhances the look but also reduces maintenance effort. Perfect for Demanding Care Areas Whether wheels, exhaust parts, or other metallic components – LUMINUS IRON Armor Sealant is the ideal choice for anyone seeking long-lasting protection and effortless care in high-stress areas.