Polishing: Everything for Perfect Paint Preparation

3D AAT 501 is an affordable cutting polish designed for maximum material removal. Specifically developed for automotive paint shops, it’s part of the AAT series, highly regarded in detailing and high-quality paint preparations for its efficiency and performance, comparable to European products but more powerful. 3D AAT 501 delivers strong cutting power, doesn't wear down polishing pads, and produces minimal dust. The ACA 501 Heavy Cut Polish effectively removes scratches starting from P1000 grit. High Cutting Power at an Affordable Price with 3D AAT 501 3D AAT 501 can be used with both orbital and rotary polishers, leaving a very glossy finish without dulling, which is uncommon for heavy cuts. Ideally, it should be followed by a finishing polish such as 3D AAT 502, 3D One Hybrid, or a comparable product. 3D AAT 501 becomes clear quickly during application, allowing for good visibility on the paint surface. It is characterized by a long working time and is economical due to the late breakdown of polishing particles. Very Easy Application: 3D AAT 501 3D AAT 501 is solvent-free, silicone-free, kerosene-free, and free of fillers. Despite its eco-friendly and user-safe formulation, it produces no dust and wipes off easily. We recommend using microfiber pads, wool pads, and medium to hard foam pads for optimal results. Thanks to its high viscosity, 3D AAT 501 doesn't splatter even at high RPMs. 3D AAT 501 provides comparatively less cut than ACA X-TRA 510 and ACA X-TRA 500 polishes but is budget-friendly and still more efficient than most premium polishes from other manufacturers.

The 3D AAT 501 is an affordable paint polish designed for maximum material removal. Created specifically for the needs of paint shops, this product is marked by the manufacturer as part of the AAT series. However, the AAT series is gaining popularity in detailing and high-quality paint preparations due to its excellent results, comparable to European products in terms of application but achieving higher performance. 3D AAT 501 offers a strong cut, does not damage polishing pads, and is dust-free. The ACA 501 Heavy Cut Polish removes scratches from grain 1000. High Material Removal at an Affordable Price with 3D AAT 501 3D AAT 501 paint polish can be used both eccentrically and rotatively, leaving a remarkably glossy finish for a heavy cut polish without matting. Ideally, 3D AAT 501 is used before a finishing polish like the 3D AAT 502, 3D One Hybrid, or a comparable polish. After a short processing time, 3D AAT 501 becomes clear, allowing for good visibility on the paint. It features a very long processing time and is cost-effective due to the late breakdown of the polishing bodies into small particles. Very Easy Application: 3D AAT 501 3D AAT 501 is free of solvents, silicone, kerosene, and fillers. Despite its environmentally friendly formulation, 3D AAT 501 does not produce dust and can be easily wiped off. We recommend using microfiber pads, wool pads, and hard to medium-soft foam pads. Thanks to its high viscosity, 3D AAT 501 does not splatter even at high RPMs. In terms of time, 3D AAT 501 delivers less material removal than the ACA X-TRA 510 and ACA X-TRA 500 polishes. It is affordable yet more powerful than most premium polishes from other manufacturers.

3D AAT 502 is an affordable polish designed for a high-gloss finish. This polish has been specifically developed for the needs of body shops, as indicated by the manufacturer's AAT series. However, the AAT series is increasingly gaining traction in detailing and high-quality paint preparations, as it delivers great results and is similar to European products in terms of handling, yet more efficient. 3D AAT 502 produces a high-gloss finish, doesn't clog polishing pads, and is dust-free. The AAT 502 Fine Polish is intended for use after heavy-cut polishes and follows after 3D AAT 501, 3D ACA 500/510, or a comparable heavy-cut polish. Easily Removes Haze and Holograms 3D AAT 502 can be used both with a rotary and dual-action polisher, effortlessly removing haze, holograms, pigtails, and fine scratches. Ideally, 3D AAT 502 is used after a sanding compound. It gives clarity quickly, allowing for a good view of the paint. 3D AAT 502 features a very long working time, is economical, and cost-effective. Very Easy Application: 3D AAT 502 3D AAT 502 is solvent-free, silicone-free, kerosene-free, and free from fillers. Despite its environmentally and user-friendly formula, 3D AAT 502 is dust-free and easy to wipe off. We recommend using foam, wool, or microfiber finish pads for application. The 3D AAT 502 provides slightly less material removal compared to ACA X-TRA 520 and has a marginally higher consumption.

3D AAT 502 is an affordable paint polish designed for a high-gloss finish. Specifically developed for the needs of painting businesses, this polish is recognized as part of the AAT series. However, the AAT series is gaining popularity in detailing and high-quality paint preparations, as it delivers excellent results and is comparable to European products in terms of application, but is more efficient. 3D AAT 502 produces a high-gloss finish, is gentle on polishing pads, and does not produce dust. The AAT 502 Fine Polish is designed for use after heavy cut polishes, coming after the 3D AAT 501, 3D ACA 500/510, or a similar heavy cut polish. Easily Removes Haze and Holograms 3D AAT 502 paint polish can be used both eccentrically and rotationally, effortlessly removing haze (gray veil), holograms, pigtails, and fine scratches. Ideally, 3D AAT 502 is applied after a sanding paste. It achieves a clear finish in a short processing time, allowing for good visibility on the paint surface. 3D AAT 502 features a very long working time and is economical and affordable to use. Very Easy Application: 3D AAT 502 3D AAT 502 is free of solvents, silicones, kerosene, and fillers. Despite its environmentally and user-friendly formulation, 3D AAT 502 does not dust and can be easily wiped off. We recommend using it with finish pads made of foam, wool, or microfiber. The 3D AAT 502 delivers slightly less material removal compared to the ACA X-TRA 520 and has a marginally higher consumption rate.

3D AAT 505 is a highly effective All in One polish with a very high cutting power. This polish was specially developed for the needs of paint shops and auto detailers, as marked by the manufacturer with the AAT series. However, the AAT series is also increasingly favored in detailing and high-quality paint preparations due to its excellent results and its resemblance to European products in terms of application, but it is more powerful. 3D AAT 505 can be used as a One Step polish or following a heavy abrasive cutting compound. Achieve a Stunning Finish Faster with 3D AAT 505 3D AAT 505 contains montan wax, which is applied in a single step after the removal of scratches, weathering, or other paint defects, creating an immense gloss. However, AAT 505 is not just a covering polish. The product was developed as the best possible blend of defect removal and gloss enhancement. Water-Based and Body Shop Safe, as it is Silicone-Free Although AAT 505 is an All in One polish containing abrasive particles, chemical polish, and wax, the product is silicone-free and can be used in paint shops. With 3D AAT 505, all weathered paints can be corrected so that these areas are indistinguishable from freshly painted components. 3D AAT 505 is water-based and therefore poses no health risks, making it user-friendly. Difference Between 3D AAT 505 and 3D Speed All in One 3D Speed and 3D AAT 505 are both All in One polishes containing wax. However, the 3D AAT is formulated for sharper cutting and is better suited for freshly painted surfaces due to its complete absence of silicone.

3D AAT 505 is a highly effective All in One polish with a very high cutting power. This polish was specifically developed for the needs of paint shops and automotive detailing professionals, which the manufacturer signifies with the AAT series. However, the AAT series is also gaining popularity in detailing and high-quality paint corrections, as it delivers excellent results and is comparable to European products in terms of handling, but is more powerful. 3D AAT 505 can be used as a One Step polish or following a strong abrasive compound. Achieve stunning results quickly: 3D AAT 505 3D AAT 505 contains Montan wax, which is applied in a single work step after removing scratches, weathering, or other paint defects, creating an immense shine. However, AAT 505 is not a so-called covering polish. The product is developed as the best possible blend of defect removal and gloss. Water-based and Body Shop Safe, as it's silicone-free Although AAT 505 is an All in One polish containing cutting particles, chemical polish, and wax, the product is silicone-free, making it suitable for use in paint shops. With 3D AAT 505, all weathered paints can be corrected to match the appearance of freshly painted parts. 3D AAT 505 is water-based, making it safe for health and user-friendly. Distinction between 3D AAT 505 and 3D Speed All in One 3D Speed and 3D AAT 505 are both All in One polishes with a wax component. However, 3D AAT is formulated with sharper cutting power and is better suited for freshly painted surfaces due to the complete lack of silicone.

3D ACA X-TRA 500 is an innovative cutting polish designed for HeavyCut and MediumCut applications. Known as 3D 500, this polish is produced by 3D Products in the USA. With 3D 500, paint defect corrections can be made in no time. The product contains advanced "Alpha Ceramic Alumina" polishing particles that allow for significantly longer working time. 3D 500 is suitable for both soft single-layer paints and hard clear coats. It is free from fillers and can be completely removed even with mild paint degreasers. High Cut and Gloss Level with 3D ACA X-TRA 500 3D 500 can be applied using rotary or eccentric machines, leaving a very glossy finish for a HeavyCut polish without hazing. Ideally, 3D 500 is used before a finishing polish such as 3D ACA X-TRA 520, 3D One Hybrid, or any comparable polish. 3D ACA 500 becomes clear after a short working time, allowing a good view of the paint surface. 3D 500 is characterized by a very long working time and is economical due to the late breaking down of the polishing particles into smaller particles. Easy to Use: 3D ACA X-TRA 500 3D 500 is solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 500 does not create dust and can be easily wiped off. It is recommended to use 3D sparingly to avoid any excess. We recommend using microfiber pads, wool pads, and hard to medium-hard foam pads with 3D. Due to its high viscosity, 3D 500 does not splash even at high RPMs.

3D ACA X-TRA 500 is an innovative paint polish designed for HeavyCut and MediumCut applications. Known as 3D 500, this polish is manufactured by 3D Products in the USA. With 3D 500, paint defect corrections can be executed in a very short time. 3D 500 contains innovative "Alpha Ceramic Alumina" polishing agents that allow for a significantly longer working time. It is suitable for both soft single-layer paints as well as hard clear coats. 3D 500 is free from fillers and can be completely removed even with mild paint degreasers. High Cut and High Gloss with 3D ACA X-TRA 500 3D 500 can be used both eccentrically and rotationally, leaving a very shiny finish typical of a HeavyCut polish without hazing. Ideally, 3D 500 should be used before a finishing polish like the 3D ACA X-TRA 520, 3D One Hybrid, or a comparable polish. 3D ACA 500 becomes clear after a short working time, allowing for good visibility on the paint. 3D 500 is characterized by a very long working time and is economically viable due to the late breakdown of the polishing agents into small particles. Very Easy Application: 3D ACA X-TRA 500 3D 500 is solvent-free, kerosene-free, and free from fillers. Despite its eco-friendly and user-friendly formulation, 3D 500 does not produce dust, making it easy to wipe off. It should be used sparingly to avoid excess. We recommend using 3D with microfiber pads, wool pads, and hard to medium-soft foam pads. Thanks to its high viscosity, 3D 500 does not splash even at high RPMs.

3D ACA X-TRA 510 is a cutting-edge paint polish designed for Heavy Cut applications. This polish can be used with both rotary and dual-action polishers. As known from other 3D polishes, it has an extended working time. It works faster than the 3D 500 on severe paint defects. 3D 510 contains innovative 'Alpha Ceramic Alumina' abrasive particles, allowing for a significantly longer processing time. It is suitable for both soft single-layer paints and hard clear coats. 3D 510 is free from fillers and can be completely removed even with gentle paint degreasers. High Material Removal in No Time with 3D ACA X-TRA 510 3D 510 can be used both excentrically and rotationally, leaving a gloss finish typical for Heavy Cut polishes without dulling. Ideally, 3D 510 is used before a finishing polish like the 3D ACA X-TRA 520, 3D One Hybrid, or a comparable product. 3D ACA 510 becomes clear after a short processing time, allowing for good visibility on the paint. It features a very long working time and is economical due to the late breakdown of the abrasive particles into smaller fragments. Very Easy Application: 3D ACA X-TRA 510 3D 510 is solvent-free, kerosene-free, and filler-free. Despite its eco-friendly and user-friendly formulation, 3D 510 does not produce dust and can be easily wiped off. It is advisable to use 3D sparingly to avoid excess. We recommend using it with microfiber pads, wool pads, and hard to medium-soft foam pads. Thanks to its high viscosity, 3D 510 does not spray even at high RPMs.

3D ACA X-TRA 510 is a revolutionary paint polish designed for Heavy Cut applications. This polish can be used both with a dual-action and rotary polisher. As known from other 3D polishes, it can be worked for an extended period of time. It is faster than the 3D 500 when addressing significant paint defects. 3D 510 features innovative "Alpha Ceramic Alumina" polishing agents that allow for a significantly longer working time. 3D 510 is suitable for soft single-layer paints as well as hard clear coats. 3D 510 is free from fillers and can be completely removed even with mild paint cleaners. High Material Removal in Short Time with 3D ACA X-TRA 510 3D 510 can be employed with both dual-action and rotary machines, leaving a very glossy finish typical of a Heavy Cut polish without hazing. Ideally, 3D 510 is used before a finishing polish like the 3D ACA X-TRA 520, 3D One Hybrid, or similar. 3D ACA 510 becomes clear after a short working time, allowing good visibility on the paint. 3D 510 is characterized by a very long working time and is economical to use due to the delayed breakup of the polishing agents into smaller particles. Very Easy Application: 3D ACA X-TRA 510 3D 510 is solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 510 does not create dust and can be easily wiped off. It is recommended to use 3D sparingly to avoid excess. We recommend using 3D with microfiber pads, wool pads, and hard to medium-soft foam pads. Due to its high viscosity, 3D 510 does not splash even at high RPMs.

3D ACA X-TRA 520 is an innovative fine paint polish designed for polishing and finishing purposes. Known by its short name 3D 520, this polish is manufactured by 3D Products in the USA. With 3D 520, paint defects can be quickly polished to a high gloss after heavy-cut polishing passes. 3D 520 is water-based and contains "Alpha Ceramic Alumina" polishing ingredients, allowing for a significantly longer working time. It is suitable for both soft single-layer paints and hard clear coats. 3D 520 is free from fillers and can be completely removed even with mild paint degreasers. Hologram-Free, Crystal Clear Finish with 3D ACA X-TRA 520 High Gloss Polish 3D 520 can be used both eccentrically and rotationally, leaving a crystal clear, hologram-free finish. Ideally, 3D 520 should be applied after a heavy-cut or medium polish like the 3D ACA X-TRA 500 or a comparable product. 3D ACA 520 becomes clear after a short working time, allowing for excellent visibility on the paint surface. 3D 520 is characterized by a very long processing time, and the late breakup of the polishing bodies into small particles makes it easy to use and cost-effective. Very Simple Application: 3D ACA X-TRA 520 3D 520 is water-based, solvent-free, kerosene-free, and free from fillers. Despite its eco-friendly and user-friendly formulation, 3D 520 does not produce dust and can be easily wiped away. It's recommended to apply 3D sparingly to avoid any excess. We suggest using 3D with softer finishing foam pads.

3D ACA X-TRA 520 is a groundbreaking polish designed for fine polishing and finishing tasks. Known by the shorthand name 3D 520, this polish is manufactured by 3D Products in the USA. With 3D 520, paint defect corrections following heavy cut polishing can be quickly brought to a high gloss. This water-based formula contains "Alpha Ceramic Alumina" polishing agents which allow for significantly longer working times. 3D 520 is suitable for both soft single-layer paints and hard clear coats. It is free from fillers and can be completely removed even with mild paint degreasers. Hologram-Free, Crystal Clear Finish with 3D ACA X-TRA 520 High Gloss Polish 3D 520 can be applied using both rotary and eccentric polishing methods, leaving behind a crystal clear finish that is free of holograms. Ideally, 3D 520 is used after a heavy cut or medium polish, such as the 3D ACA X-TRA 500 or a comparable polish. The polish achieves clarity quickly even after a short working time, allowing for great visibility on the paint. 3D 520 stands out due to its extended working time, as the late breakdown of polishing agents into small particles makes it user-friendly and cost-effective. Very Easy Application: 3D ACA X-TRA 520 3D 520 is water-based, solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 520 does not create dust and is easy to wipe off. It is recommended to apply 3D 520 sparingly to avoid excess. We recommend using it with softer finishing foam pads.

3D Car Polish Bestsellers Bundle – 510, 520, 400 & 425 This exclusive 3D Car Polish Set combines four proven bestsellers in one practical bundle – perfect for professional results with rotary polishers, dual action, or free-spinning polishers. Tailored for all paint conditions, this set offers defect correction, shine, and protection in one. 3D ACA X-TRA 510 Cutting Polish The heavy-cut polish 510 is specifically designed for maximum defect correction. It efficiently removes deep scratches, severe swirls, and paint defects, leaving a smooth surface. Ideal as the first step for heavily weathered paints. 3D ACA X-TRA 520 Finish Polish The 520 provides the perfect high-gloss finish – a fine finishing polish applied after the cutting step. It removes fine holograms and ensures a brilliant, mirror-like deep shine without any sanding marks. 3D One Hybrid 400 Polish The versatile one-step polish combines cutting and finishing properties. It removes medium paint defects while simultaneously creating a glossy finish – perfect for quick polishing processes with excellent results. 3D Speed 425 Glaze & Wax As a final step, the Speed 425 offers an all-in-one solution with light polishing capabilities, shine enhancement, and a protective wax finish. Perfect for refreshing in between or sealing after polishing.

3D Car Polishes + Therminator Pads 125mm Bundle A professional polishing set for perfect paint preparation: This bundle combines the three most popular polishes from 3D Car Care with high-quality Therminator polishing pads from Detail Passion and two edging-free professional microfiber cloths. Ideal for anyone looking to remove scratches, achieve shine, and protect the paint in one operation – whether a pro or an enthusiastic novice. 3D ACA X-TRA 500 Cutting Polish (236ml): Powerful heavy cut for quick removal of deep scratches and oxidation. Designed for maximum cutting performance without dust generation – ideal for harder paints and rotary machines. 3D ACA X-TRA 520 Finish Polish (236ml): The perfect finishing polish after cutting – removes fine holograms and leaves a mirror-like deep gloss. Perfect for dark or sensitive paints. 3D ONE Hybrid 400 Polish (236ml): The universal all-in-one polish for medium defects to high gloss – with cutting and finishing properties. Ideal for quick polishing cycles with excellent results, even on ceramic paints. Therminator Pads (1x Ø 125/135mm each): Medium cut orange – for the cutting process with the 500. Intermediate blue – perfect for one-step polishing with 3D ONE. Finish black – for fine finishing with the 520 polish. 2 x Detail Passion Polishing Cloth Tough 2Face Double40 – 420gsm: Professional microfiber cloths for streak-free polishing of polishes and sealants, double-sided, edging-free, in ice grey. The set is completely silicone-free, compatible with all common polishing machines, and offers safe application with the clear allocation of pad and polish – even for beginners. For a brilliant finish with maximum surface smoothness and professional protection.

3D Car Polishes Bestseller Bundle – 510, 520, 400 & 425 This exclusive 3D Car Polish Set combines four proven bestsellers in one practical bundle – ideal for professional results with rotary polishers, dual-action, or free-spinning polishers. Perfectly adapted to all paint conditions, this set offers defect correction, shine, and protection in one. 3D ACA X-TRA 510 Cutting Polish The heavy-cut polish 510 has been specially developed for maximum defect correction. It efficiently removes deep scratches, heavy swirls, and paint defects while leaving a smooth surface. Ideal as the first step for severely weathered paints. 3D ACA X-TRA 520 Finish Polish For the perfect high-gloss finish, the 520 is a fine finishing polish applied after the cutting step. It removes fine holograms and provides a brilliant, mirror-like deep gloss without sanding marks. 3D One Hybrid 400 Polish The versatile One Step Polish combines cutting and finishing properties. It removes medium paint defects while simultaneously creating a glossy finish – ideal for quick polishing jobs with outstanding results. 3D Speed 425 Glaze & Wax As the final step, the Speed 425 offers an all-in-one solution with light polishing power, gloss enhancement, and a protective wax finish. Perfect for quick refreshing or as a sealant after polishing.

3D Glass Polish is an innovative polish based on ceroxide for real glass. With 3D Glass Polish, light to deeper scratches on real glass surfaces can be removed, including streaks from windshield wipers and baked-in water spots. Thanks to the high proportion of the decisive abrasive medium ceroxide, the polish is easy to apply and delivers impressive results in no time. 3D Glass Polish for Windshields and All Other Real Glass Surfaces 3D Glass Polish can be worked for a long time and still wiped off easily. For best results, we recommend using felt pads like the Lake Country Rayon Glass Polishing Pads. Work should be done while monitoring the temperature, and water can be sprayed onto the glass for cooling.

3D One Hybrid is a revolutionary polish from the US manufacturer 3D Products. With 3D One Hybrid, paint defect corrections can be achieved with a perfect finish in significantly shorter time. 3D One Hybrid is suitable for multiple polishing steps and can thus be used as a universal polish with various polishing pads and application methods. 3D One is characterized by its very long working time, is dust-free, and can be easily removed from the paint. The Perfect Polish for Professionals and Enthusiasts: 3D One Hybrid For professionals, it is important that the consumption of polish is as low as possible and a variety of processing steps can be carried out. 3D One Hybrid can be used with all types of polishing pads - foam pads, microfiber pads, lambswool pads, wool pads. Car care enthusiasts will appreciate that 3D One Hybrid has a low odor and can be processed for a very long time. For simple hand polishing, 3D One Hybrid can even be applied in direct sunlight. 3D One Hybrid is free from fillers and can be completely removed even with gentle degreasers. 3D One Hybrid is ideal as a polish for subsequent sealants using silicones, polymers, or high-quality waxes. Universally Applicable: Rotary, Orbital, Forced Orbital 3D One Hybrid is designed for use with modern high-performance polishing machines and can be processed rotarily, orbitally, and forced orbitally. With sharp polishing pads, 3D One Hybrid delivers a significant cut, while its long working time allows for a perfect finish to mirror gloss with finer pads. The tendency to form holograms during rotary processing has been almost completely eliminated by the unique "Ceramic Alumina Abrasive" formula. Extremely Long Working Time Thanks to Durable Abrasives and High-Quality Carrier Liquid 3D One Hybrid was developed with a consciously high proportion of carrier liquid and durable abrasives. This combination is, in our opinion, unique worldwide. This formulation allows 3D One Hybrid to be perfectly controlled through the type of polishing and the polishing pad, making it excellent for medium cut to high-gloss finishing. For higher cut, we recommend switching from the orbital polisher to a rotary polisher or using a classic heavy cut polish orbitally or forced orbitally. 3D One Hybrid also serves as a problem solver for sensitive paints and "sticky paints." To find an affordable entry point, we offer 3D One Hybrid in various sizes and a trial package.

3D One Hybrid is a revolutionary polish from the US manufacturer 3D Products. With 3D One Hybrid, paint defect corrections can be achieved with a perfect finish in significantly less time. 3D One Hybrid is suitable for multiple polishing steps and can be used as a universal polish with various polishing pads and application methods. 3D One offers an extended working time, doesn’t create dust, and is easy to remove from the paint. The Perfect Polish for Professionals and Enthusiasts: 3D One Hybrid For professionals, it is crucial that the consumption of a polish is as low as possible while allowing for a variety of processing steps. 3D One Hybrid can be used with all types of polishing pads - foam pads, microfiber pads, lambswool pads, wool pads. Car care enthusiasts will appreciate that 3D One Hybrid is low-odor and can be applied for extended periods. For simple hand polishing, 3D One Hybrid can even be used in direct sunlight. 3D One Hybrid is free of fillers and can be completely removed even with gentle degreasers. 3D One Hybrid is ideal for subsequent sealants using silicones, polymers, or high-quality waxes. Universally Applicable: Rotary, Eccentric, Forced Eccentric 3D One Hybrid is designed for use with modern high-performance polishing machines and can be processed rotary, eccentric, and forced eccentric. On aggressive polishing pads, 3D One Hybrid delivers considerable material removal, while the long working time allows for a perfect mirror finish with finer pads. The tendency to create holograms during rotary processing has been nearly eliminated by the unique "Ceramic Alumina Abrasive" formula. Extremely Long Working Time Thanks to Durable Abrasives and High-Quality Carrier Liquid 3D One Hybrid was developed with a deliberately high proportion of carrier liquid and durable abrasives. This combination is, in our opinion, unique worldwide. Thanks to this formulation, 3D One Hybrid can be perfectly controlled over polishing type and pad, making it excellent for medium cut to high gloss finishing. For higher material removal, we recommend switching from a random orbital polisher to a rotary polisher or using a classic heavy cut polish eccentrically or forced eccentrically. Additionally, 3D One Hybrid serves as a problem solver for sensitive paints and "sticky paints". To provide an affordable entry point, we offer 3D One Hybrid in various sizes and a sample pack.

3D One Hybrid is a revolutionary polish from the US manufacturer 3D Products. With 3D One Hybrid, paint defect corrections with a perfect finish can be achieved in significantly less time. 3D One Hybrid is suitable for multiple polishing steps and can thus be used as a universal polish with various polishing pads and processing methods. 3D One is characterized by a very long working time, does not dust, and is easy to remove from the paint. The Perfect Polish for Professionals and Enthusiasts: 3D One Hybrid For professionals, it is important that the consumption of a polish is kept as low as possible and a variety of processing steps can be performed. 3D One Hybrid can be used with all types of polishing pads - foam pads, microfiber pads, lambswool pads, and wool pads. Car care enthusiasts will appreciate that 3D One Hybrid is low-odor and can be processed for a very long time. For simple hand polishing, 3D One Hybrid can even be used in direct sunlight. 3D One Hybrid is free from fillers and can be completely removed even with gentle degreasers. 3D One Hybrid is ideal as a polish for subsequent sealants using silicones, polymers, or high-quality waxes. Universally Applicable: Rotary, Dual Action, Forced Rotation 3D One Hybrid is designed for use with modern high-performance polishing machines and can be processed rotarily, eccentrically, and forced eccentric. On sharp polishing pads, 3D One Hybrid delivers considerable cutting power while the long working time allows for a perfect finish to a mirror-like shine with finer pads. The tendency to form holograms when processed rotarily has been nearly eliminated due to the unique "Ceramic Alumina Abrasive" formula. Extremely Long Working Time Thanks to Stable Abrasives and High-Quality Carrier Liquid 3D One Hybrid was developed with a consciously high content of carrier liquid and stable abrasives. This combination is, in our opinion, unique worldwide. Due to this formulation, 3D One Hybrid can be perfectly controlled over the polishing type and polishing pad and is excellently suited for medium cut to high-gloss finishing. For higher cutting power, we recommend switching from a dual action polisher to a rotary polisher or using a classic heavy cut polish eccentrically or forced eccentrically. 3D One Hybrid is also suitable as a problem solver for sensitive paints and "sticky paints". To provide an affordable entry point, we offer 3D One Hybrid in various sizes and a sample pack.

3D Speed combines the cutting and gloss-bringing properties of 3D One Hybrid with a high-quality synthetic wax sealant. Known in forums and at the US mail-order company "Autogeek" as 3D HD Speed, it can be used with rotary and eccentric polishers. Like other 3D polishes, it can be worked for a long time. Despite its temperature-resistant wax content, 3D Speed wipes off easily. 3D Speed features innovative "Alpha Ceramic Alumina" polishing agents that enable a significantly longer working time. It is suitable for both soft single-layer paints and hard clear coats. Although designed as a standalone polish and sealant, it can also be used as a glaze for subsequent sealing with natural waxes, polymer products, or Teflon sealants. 3D Speed: Universal Polish for Quick Detailing 3D Speed can be used universally for defect correction of light scratches. It is also suitable for a multi-step process with a subsequent sealant. Typically, 3D polishes One Hybrid or Heavy Cut polishes 500 or 510 are used beforehand in multi-step processes. 3D Speed consistently delivers a high deep gloss. Insider Tip for Maximum Shine on Solid Colors! While we generally advise against using polishes with filling and covering properties before applying ceramic coatings, it is possible to use 3D Speed for high gloss finish polishing. Especially on solid color paints, the deep gloss of 3D Speed is unparalleled. In this case, however, thorough degreasing is essential.

3D Speed combines the cutting and shining properties of 3D One Hybrid with a high-quality synthetic wax sealant. Also known in forums and by the US mail order company "Autogeek" as 3D HD Speed, it can be processed both rotationally and eccentrically. As with other 3D polishes, the polish can be spread for an extended period. Despite its temperature-resistant wax component, 3D Speed can be easily wiped off. 3D Speed contains innovative "Alpha Ceramic Alumina" polish bodies that allow for a significantly longer processing time. 3D Speed is suitable for both soft single-layer paints and hard clear coats. Although 3D Speed is designed as a standalone polish and sealant, it can also be used as a glaze before sealing with natural waxes, polymer products, or Teflon sealants. 3D Speed: Universal Polish for Quick Detailing 3D Speed can be used universally for correcting light scratches. The polish is also suitable for a multi-step process with subsequent sealing. Typically, in multi-step applications, previous 3D polishes such as One Hybrid or the heavy cut polishes 500 or 510 are used. 3D Speed consistently delivers a high depth gloss. Insider Tip for Maximum Shine on Solid Colors! Although we generally advise against polishes with filling and covering properties before applying ceramic coatings, it is possible to use 3D Speed for high gloss finish polishes. Especially on solid-colored paints, the depth gloss of 3D Speed is unparalleled. In this case, however, thorough de-greasing is necessary.

AETERNO Zenit Polishes Bundle – All-in-One + Pro Cut + Pro Finish A premium care bundle from Italy for discerning vehicle care: All three polishes from the AETERNO brand provide a complete system for defect removal, high gloss, and protection. Complete 2-Step Method: Use the Pro Cut compound polish to efficiently remove visible scratches and paint defects, followed by the Pro Finish polish for a perfect finish and deep gloss. All-in-One Solution: For quick maintenance in between, the All-in-One polish is ideal: reduce defects, create high gloss, and apply a protective sealant – all in one step. Material and Process Friendly: All polishes are very economical to use and show hardly any splatter even with rotary use – making them ideal for beginners as well as professionals. Body-Shop Safe & Silicone-Free: The polishes contain no silicones and are thus suitable for professional bodywork as well as high-quality paint and film surfaces. This bundle offers not only strong polishing performance but also a well-thought-out care chain: remove defects, smooth surfaces, build protection. For those who value a well-maintained paint job with a long-lasting shine, this bundle is an excellent choice. Zenit Pro Cut – Powerful Defect Correction The Zenit Pro Cut is the heavy cut polish of the bundle, designed for the effective removal of severe paint defects such as scratches, sanding marks, or oxidation. It works reliably on both fresh and cured paints and impresses with its fast cutting behavior while ensuring controlled handling. Even with rotary polishing, the Pro Cut remains pleasantly dust-free and splatters little. Ideal for anyone looking for a clean, powerful correction polish. Zenit Pro Finish – High Gloss for the Perfect Finish After the sanding phase, the Zenit Pro Finish makes the paint shine. This finish polish is designed to eliminate light holograms, polishing marks, and fine micro-damages – ensuring a brilliant, reflective result. It is extremely easy to polish out, silicone-free, and can be safely applied to dark, sensitive paints. The gloss is deep, and the surface feels smooth and refined – perfect for the final step of any paint care. Zenit All-in-One – Polish, Shine, Protect in One Step The All-in-One polish from AETERNO combines polishing power, gloss enhancement, and protection in one product. It is ideally suited for quick vehicle preparation or maintenance in between. Light scratches are smoothed out, gloss is visibly enhanced, and a silicone-free protective film remains. This polish saves time, minimizes product changes, and delivers an overall well-groomed result with just one working step.

AETERNO Car Polishes + Therminator Pads 125 mm Bundle This bundle combines AETERNO's premium polishes with powerful polishing pads from Detail Passion, along with two high-quality microfiber cloths and a professional IPA cleaner from AUTO GRAPH – perfect for a comprehensive vehicle detailing service that removes scratches, creates a high gloss, and provides protection. Includes three AETERNO polishes: Zenit Pro Cut: Heavy cut polish to remove severe paint defects. Zenit Pro Finish: Finishing polish for deep gloss and hologram-free results. Zenit All-in-One: Combines defect correction, gloss enhancement, and protection in one step. Three polishing pads from Detail Passion: Therminator Medium Cut orange Ø 125/135 mm: For medium cut on heavily used paints. Therminator Intermediate blue Ø 125/135 mm: Ideal for one-step applications and softer clear coats. Therminator Finish black Ø 125/135 mm: For maximum gloss performance during finishing. AUTO GRAPH AVENTURINE IPA Cleaner 400 ml: High-purity isopropanol cleaner for perfect paint preparation before sealing. 2 x Detail Passion Microfiber Cloth Tough 2Face Double40 – 420 gsm, Icegrey: Edge-less, double-sided professional cloths for polishing and sealing work. This bundle offers a complete solution: With the AETERNO care chain, paint defects are systematically eliminated, while the Therminator pads are precisely matched to the respective processing level – from coarse to high gloss. The IPA cleaner ensures that the surface is free of contaminants and that the protective layer adheres perfectly. The microfiber cloths round off the package: easy application, residue-free removal, and brilliant finishing. Ideal for both beginners seeking a clear step-by-step solution and professionals looking for a high-quality complete set with significant cost advantages compared to individual purchases.

AETERNO Zenit Polishing Bundle – All-in-One + Pro Cut + Pro Finish A high-quality care bundle from Italy for demanding vehicle maintenance: All three polishes from AETERNO provide a complete system for defect removal, high gloss, and protection. Complete 2-Step Method: Use the Pro Cut compound polish to efficiently remove visible scratches and paint defects, followed by the Pro Finish polish for a perfect finish and deep shine. All-in-One Solution: For quick maintenance, the All-in-One polish is ideal: reduce defects, achieve high gloss, and apply a protective seal - all in one step. Material and user-friendly: All polishes are very economical and show minimal splatter even with rotary use - making them perfect for both beginners and professionals. Body Shop Safe & Silicone-Free: The polishes contain no silicones, making them suitable for professional bodywork as well as high-quality paint and wrap surfaces. This bundle not only offers strong polishing performance but also a thoughtful care process: remove defects, smooth surfaces, build protection. If you value a well-maintained paint finish with a long-lasting shine, this bundle is an excellent choice. Zenit Pro Cut – Powerful Defect Correction The Zenit Pro Cut is the heavy-cut polish of the bundle, designed for effectively removing severe paint defects such as scratches, sanding marks, or oxidation. It works reliably on both fresh and cured paints and impresses with fast cutting performance while maintaining controlled application. Even during rotary polishing, the Pro Cut remains pleasantly dust-free and splatter-free. Ideal for those seeking a clean, powerful correction polish. Zenit Pro Finish – High Gloss for the Perfect Finish After the sanding phase, the Zenit Pro Finish makes the paint shine. This finishing polish is designed to remove light holograms, polishing haze, and fine micro-damage – delivering a brilliant, mirror-like result. It can be extremely easily polished out, is silicone-free, and can be safely applied to dark, delicate paints. The shine is deep, and the surface feels smooth and refined – perfect for the final step in any paint care routine. Zenit All-in-One – Polish, Shine, Protect in One Step The All-in-One polish from AETERNO combines polishing power, gloss enhancement, and protection in one product. It is ideal for quick vehicle preparation or mid-maintenance. Light scratches are smoothed out, gloss is visibly enhanced, and a silicone-free protective film is left behind. This polish saves time, minimizes product exchange, and delivers a thoroughly maintained result with just one working step.

AETERNO Zenit Pro All-in-One Polish with Sealant – Perfect Paint Care in One Step Effective paint polish and long-lasting protection in one product – the AETERNO Zenit Pro All-in-One Polish with Sealant combines powerful polishing agents with a protective sealant. Developed for used car detailing, caring for sensitive paints, or as optimal preparation for wax, this innovative polish delivers a flawless finish with brilliant color depth. At the same time, it leaves a durable protective layer that preserves the paint against environmental influences. All-in-One Formula: Polish and sealant in one product for efficient paint preparation. Perfect for sensitive paints & classic cars: Gentle abrasives prevent paint removal and ensure brilliant shine. Ideal for used car detailing: Removes light scratches, holograms, and brings the paint to a high gloss. Preparation for waxes or standalone protection: Leaves a long-lasting protective layer. Easy wipe-off behavior: Quick and effortless to polish off, without greasy residues. Silicone-free: Safe for body shops and professional applications. Gentle Paint Correction with Protective Function AETERNO Zenit Pro All-in-One Polish with Sealant is ideal for sensitive paints and classic cars, where especially gentle polishing is required. The fine abrasives remove light paint defects without unnecessarily stripping the surface. At the same time, the integrated sealant ensures deep gloss and a protective barrier against dirt, UV radiation, and environmental influences. Versatile Application & Effortless Processing Whether for used car detailing, as a quick one-step polish, or as a finish for well-preserved paints – this product offers maximum flexibility. Thanks to the silicone-free formula, the polish is also suitable for use in body shops. The particularly light wipe-off behavior makes work easier and leaves a streak-free, clear result. Protection and Shine in One Step With the integrated sealant, the AETERNO Zenit Pro All-in-One Polish with Sealant can be used as standalone protection or as a base for waxes and additional protective layers. The generated protective layer preserves the paint from external influences and ensures a long-lasting, smooth surface with excellent color depth.

AETERNO Zenit Pro All-in-One Polish with Sealant – Perfect Paint Care in One Step This effective polish and long-lasting protection in a single product – the AETERNO Zenit Pro All-in-One Polish with Sealant combines powerful polishing agents with a protective sealant. Designed for used car detailing, the care of sensitive paints, or as an optimal preparation for wax, this innovative polish offers a flawless finish with brilliant color depth while leaving a resilient protective layer that preserves the paint from environmental influences. All-in-One Formula: Polish and sealant in one product for efficient paint preparation. Perfect for Sensitive Paints & Classic Cars: Gentle abrasives prevent paint removal and provide brilliant shine. Ideal for Used Car Care: Removes light scratches, holograms, and brings the paint to high gloss. Preparation for Waxes or Standalone Protection: Leaves a long-lasting protective layer. Easy Wipe-Off: Quick and effortless to polish out without greasy residues. Silicone-Free: Safe for paint shops and professional applications. Gentle Paint Correction with Protective Features AETERNO Zenit Pro All-in-One Polish with Sealant is ideal for sensitive paints and classic cars, where a particularly gentle polish is required. The fine abrasives remove light paint defects without unnecessarily degrading the surface while the integrated sealant provides a deep shine and protective barrier against dirt, UV radiation, and environmental influences. Versatile Application & Effortless Processing Whether for used car detailing, as a quick one-step polish, or as a finish for well-maintained paints – this product offers maximum flexibility. Thanks to the silicone-free formula, the polish is also suitable for use in paint shops. The particularly easy wipe-off behavior facilitates work and leaves a streak-free, clear finish. Protection and Shine in One Step With its integrated sealant, the AETERNO Zenit Pro All-in-One Polish with Sealant can be used as standalone protection or as a base for waxes and additional protective layers. The protection layer created preserves the paint from external influences and ensures a long-lasting, smooth surface with excellent color depth.

AETERNO Zenit Pro All-in-One Polish & Sealant – Perfect Paint Care in One Step Powerful paint polish and long-lasting protection combined – the AETERNO Zenit Pro All-in-One Polish & Sealant blends strong cutting agents with a protective sealant. Designed for used car detailing, delicate paint care, or as the perfect wax prep, this innovative polish delivers a flawless finish with brilliant depth. Despite its high cut, it provides exceptional finish quality, creating an incredible clear shine with intense light reflection even on light paints. At the same time, it leaves a durable protective layer that guards the paint against environmental damage. All-in-One Formula: Polish and sealant combined for efficient paint correction. High Cut with Finish Character: Visible defect removal with a brilliant surface. Outstanding Shine on Light Paints: Crystal-clear reflection and striking depth effect. Perfect for Delicate Paints & Classics: Gentle abrasives prevent unnecessary paint removal. Ideal for Used Car Detailing: Removes light scratches, holograms, and boosts gloss. Prepares for Waxes or Solo Protection: Leaves a long-lasting protective layer. Easy Wipe-Off: Polishes out quickly without greasy residues. Silicone-Free: Safe for paint shops and professional use. Gentle Paint Correction with Protective Function AETERNO Zenit Pro All-in-One Polish & Sealant is ideal for sensitive paints and classic cars needing gentle polishing. Modern abrasives deliver high correction with an exceptionally fine finish. Even on sensitive or light uni and metallic paints, it creates an even, hologram-free gloss with impressive clarity. The built-in sealant also forms a protective barrier against dirt, UV rays, and environmental impacts. Optimal Performance with Large-Throw Polishers & Premium Pads The polish unfolds its full potential especially on large-throw dual action polishers from 12mm stroke. Paired with specially designed pads like the Detail Passion Therminator+ or Lake Country HDO Pads, it achieves an impressive balance of defect correction and high-gloss finish. Efficient force transfer of modern large-throw machines speeds up work while the matched pad structure ensures crystal-clear, even surface results. Versatile Use & Effortless Application Perfect for used car detailing, as a fast one-step polish, or finishing well-maintained paints – this product offers maximum flexibility. Its silicone-free formula makes it ideal for paint shops as well. The easy wipe-off behavior simplifies work and leaves a streak-free, clear result with visible gloss boost. Protection and Shine in One Step Thanks to the integrated sealant, AETERNO Zenit Pro All-in-One Polish & Sealant can be used as sole protection or as a base for waxes and additional sealants. The protective layer preserves the paint from external influences and ensures a long-lasting, smooth surface with excellent depth and stunning light reflection.

AETERNO Zenit Pro All-in-One Polish with Sealant – Perfect Paint Care in One Step Powerful paint polish and long-lasting protection combined – the AETERNO Zenit Pro All-in-One Polish with Sealant blends effective polishing agents with a protective sealant. Designed for used car detailing, delicate paint care, or as an ideal wax preparation, this innovative polish delivers a flawless finish with brilliant color depth. Despite its surprisingly high cut, it impresses with top-notch finishing, producing incredible clear shine and intense light reflection even on light paints. At the same time, it leaves a durable protective layer that shields paint from environmental damage. All-in-One Formula: Polish and sealant combined for efficient paint correction. High Cut with Finishing Power: Noticeable defect correction with a brilliant surface. Outstanding Shine on Light Colors: Crystal-clear reflection and visible depth effect. Perfect for Delicate Paint & Classic Cars: Gentle abrasives prevent excessive clear coat removal. Ideal for Used Car Refinishing: Removes light scratches, holograms, and boosts gloss. Wax Prep or Standalone Protection: Leaves a long-lasting protective barrier. Easy Wipe-Off: Quick, effortless polishing without greasy residue. Silicone-Free: Safe for bodyshops and professional use. Gentle Paint Correction with Protective Shield AETERNO Zenit Pro All-in-One Polish with Sealant is perfect for sensitive paints and classic cars needing gentle polishing. Advanced abrasives deliver high correction combined with an exceptionally fine finish. Even on delicate or light solid and metallic paints, it creates a uniform, hologram-free gloss with impressive clarity. The built-in sealant forms a protective barrier against dirt, UV rays, and environmental influences. Optimal Performance with Large-Throw Orbitals and Premium Pads This polish shows its full potential especially on large-throw orbital polishers from 12 mm throw. Paired with specially designed pads like the Detail Passion Therminator+ or Lake Country HDO Pads, it strikes the perfect balance between defect correction and high-gloss finishing. Efficient power transfer from modern large-throw machines ensures fast progress, while the pad structure produces an extremely clear, uniform surface. Versatile Use & Effortless Application Whether for used car detailing, as a quick one-step polish, or finish for well-maintained paint – this product offers maximum flexibility. Its silicone-free formula is also suitable for paint shops. Easy wipe-off simplifies working and leaves a streak-free, clear result with visible gloss enhancement. Protection & Shine in One Step The integrated sealant means AETERNO Zenit Pro All-in-One Polish with Sealant can be used as standalone protection or as a base for waxes and additional layers. The protective coat guards paint from external damage and delivers a durable, smooth surface with excellent color depth and impressive light reflection.

AETERNO Zenit Pro Finishing Polish – Deep Gloss & Perfect Paint Finish Maximum clarity, brilliant deep gloss, and an extremely fine paint finish – the AETERNO Zenit Pro Finishing Polish has been specially designed for the final perfection of sensitive paints. This advanced finishing polish provides a flawless surface free from micro-scratches or holograms, elevating even the most demanding solid colors, such as the renowned Porsche Black, to a new level of shine. Thanks to its balanced cutting performance, it is also ideal for one-step polishing or medium-cut corrections, where defect correction is required alongside a high-gloss finish. Extremely fine paint finish: Perfect high-gloss refinement without holograms. Brilliant deep gloss: Maximum color depth for an impressive finish. Ideal for solid colors & sensitive paints: Gentle and highly compatible with delicate surfaces. Optimal defect correction: Removes final polishing marks and brings the paint to show car level. Suitable for one-step & medium-cut work: Perfect balance between cutting power & gloss. Effective polish for films: Safe to use on glossy paint protection and full wraps. Easy wiping: Effortless polishing without smearing or residues. Perfect preparation for sealants: Ideal as the last step before wax or ceramic coating. Flawless Perfection for Sensitive Paints High-gloss paints, especially deep black solid colors like Porsche Black, demand the highest standards from a finishing polish. The AETERNO Zenit Pro Finishing Polish provides an exceptionally fine finish and ensures a mirror-smooth result without stressing the sensitive surface. Its extremely good compatibility makes it the first choice for particularly demanding paint surfaces, as well as for sensitive paint protection films and glossy full wraps. Maximum Color Depth & Reflective Shine The innovative formula creates a unique deep gloss that visually deepens the paint and enhances light reflections. Fine polishing particles eliminate last defects, while the gentle processing leaves a flawless finish without polishing marks or holograms. Even with one-step polishing, the combination of moderate defect correction and high-gloss finish guarantees impressive results in just one pass. Perfect Finish for the Final Shine As the final step after defect correction or as a standalone high-gloss polish, the AETERNO Zenit Pro Finishing Polish ensures maximum optical perfection. The application is effortless, wiping is extremely easy, and the result is impressive – whether for show cars, collector vehicles, or the daily perfection of high-quality paints and films.

AETERNO Zenit Pro Finishing Polish – Ultimate Shine & Perfect Paint Refinement Maximum clarity, brilliant depth of shine, and an extremely fine paint finish – the AETERNO Zenit Pro Finishing Polish is specifically designed for the final perfection of delicate paints. This advanced finishing polish ensures a flawless surface without micro-scratches or holograms, elevating even the most demanding solid colors, such as the famous Porsche Black, to a new level of brilliance. Thanks to its balanced cutting performance, it's also ideal for one-step polishing tasks or medium-cut corrections, where defect correction and high-gloss finish are simultaneously required. Extremely fine paint finish: Perfect high-gloss refinement without holograms. Brilliant depth of shine: Maximum color depth for an impressive finish. Ideal for solid colors & delicate paints: Gentle and highly compatible with sensitive surfaces. Optimal defect correction: Removes last polishing traces and brings the paint to show car level. Suitable for one-step & medium-cut tasks: Perfect balance between cutting power & gloss. Effective polish for wraps: Safely applicable on glossy paint protection and full wraps. Easy wipe-off: Effortless polishing without smearing or residue. Perfect preparation for sealants: Ideal as the last step before wax or ceramic coating. Flawless Perfection for Sensitive Paints High-gloss paints, especially deep black solid colors like Porsche Black, place the highest demands on a finishing polish. The AETERNO Zenit Pro Finishing Polish offers uniquely fine processing and delivers a mirror-smooth result without stressing the delicate surface. Its excellent compatibility makes it the first choice for particularly demanding paint surfaces, as well as for sensitive paint protection films and glossy full wraps. Maximum Color Depth & Reflective Shine Thanks to the innovative formula, a unique depth of shine is created that visually deepens the paint and enhances light reflections. Fine polishing particles eliminate last defects while the gentle processing leaves a flawless finish without polishing traces or holograms. Even with one-step polishing tasks, the combination of moderate defect correction and high gloss finish delivers impressive results in a single pass. Perfect Finish for Ultimate Shine As the final step after defect correction or as a standalone high-gloss polish, the AETERNO Zenit Pro Finishing Polish ensures maximum optical perfection. The application is effortless, the wipe-off extremely easy, and the result astonishing – whether for show cars, collector vehicles, or the daily perfection of high-quality paints and wraps.

The APS Detailing Fantastic 3 brushes are screwable brush grips and adapters for the Fantastic 3 brush heads, available in sets and individually. The brush heads can be operated either manually, with a cordless drill, or with the Flex PXE 80 mini polisher. The advantage is clear: cleaning tasks can be machine-assisted to speed up the process. With the ability to use different brush heads, virtually all imaginable materials can be cleaned. Grip or adapter for Fantastic 3 brush heads Only compatible with Fantastic 3 brushes and brushes APS Detailing brush grip approx. 153mm long APS Detailing drill adapter short approx. 45mm long APS Detailing drill adapter long approx. 75mm long APS Detailing adapter Flex PXE 80 approx. 45mm long

APS Detailing Fantastic 3 brush heads are detachable brush attachments for the Fantastic 3 handles and adapters. White synthetic: Medium-hard attachment Ultra-soft black: Soft attachment Ultra-soft red: Soft attachment Beige natural fiber: Medium-hard natural attachment Sharp blue: Sharp robust attachment

APS Detailing Fantastic 3 Brushes feature screwable grip handles and brush adapters designed for use with Fantastic 3 brush heads, available in sets and individually. The brush heads can be operated with a hand grip, a cordless drill, or the Flex PXE 80 mini polisher. The benefits are clear: cleaning tasks can be enhanced and accelerated through mechanical means. With the option to use different brush heads, virtually any material can be cleaned. Handle or adapter for Fantastic 3 brush attachments Compatible exclusively with Fantastic 3 brushes and brushes APS Detailing brush handle approximately 153mm long APS Detailing drill adapter short approximately 45mm long APS Detailing drill adapter long approximately 75mm long APS Detailing adapter Flex PXE 80 approximately 45mm long

APS Detailing Fantastic 3 Brushes are screw-on brush handles and brush adapters for the Fantastic 3 brush heads, which are available as a set or individually. The brush heads can thus be operated either with a hand grip, on a cordless drill, or on the Flex PXE 80 mini polishing machine. The advantage is clear: cleaning tasks can be machine-assisted, making them faster. With the ability to use different brush heads, virtually all conceivable materials can be cleaned. Handle or adapter for Fantastic 3 brush attachments Exclusively compatible with Fantastic 3 brushes and paintbrushes APS Detailing brush handle approx. 153mm long APS Detailing drill adapter short approx. 45mm long APS Detailing drill adapter long approx. 75mm long APS Detailing adapter Flex PXE 80 approx. 45mm long

APS Detailing Fantastic 3 brush heads are screw-on brush attachments for the Fantastic 3 handles and adapters. White synthetic: Medium-hard attachment Ultra-soft black: Soft attachment Ultra-soft red: Soft attachment Beige natural fiber: Medium-hard natural attachment Sharp blue: Sharp robust attachment

APS Detailing Fantastic 3 brushes are screwable brush handles and brush adapters for the Fantastic 3 brush heads, available in sets and individually. The brush heads can be operated either with a hand grip, cordless drill, or the Flex PXE 80 mini polishing machine. The advantage is clear: cleaning tasks can be enhanced and accelerated with machine assistance. With the option to use different brush heads, almost any imaginable material can be cleaned. Handle or adapter for Fantastic 3 brush attachments Exclusively compatible with Fantastic 3 brushes and nozzles APS Detailing brush handle approx. 153mm long APS Detailing Drill Adapter Short approx. 45mm long APS Detailing Drill Adapter Long approx. 75mm long APS Detailing Adapter Flex PXE 80 approx. 45mm long

APS Detailing Fantastic 3 brush heads are screw-on brush attachments for the Fantastic 3 handles and adapters. Synthetic White: Medium-hard attachment Ultra-soft Black: Soft attachment Ultra-soft Red: Soft attachment Natural Fiber Beige: Medium-hard natural attachment Sharp Blue: Sharp robust attachment

APS Detailing Fantastic 3 brush heads are screw-on brush attachments for the Fantastic 3 handles and adapters. White synthetic: Medium-hard attachment Ultra-soft black: Soft attachment Ultra-soft red: Soft attachment Beige natural fiber: Medium-hard natural attachment Sharp blue: Sharp sturdy attachment

The Flex PXE 80 mini polisher can be enhanced with a range of accessories. Included in this segment are optimized backing plates from APS that significantly reduce vibration, accelerating paint defect corrections. Although corresponding backing plates from Flex are available in similar sizes, APS has achieved a notable increase in working comfort and a reduction in wear through the use of special materials. APS Detailing Flex PXE 80 Velcro Backing Plate 75mm Low Vibration Low vibration backing plate for the Flex PXE Decoupled foam and stainless steel High-quality Velcro for secure hold

Expand the capabilities of the Flex PXE 80 mini polisher with a range of accessories. This includes optimized backing plates from APS, designed to minimize vibration and accelerate paint defect corrections. While compatible backing plates are also available directly from Flex, APS has succeeded in significantly enhancing working comfort and reducing wear through special materials. APS Detailing Flex PXE 80 Velcro Backing Plate V2 50mm Low Vibration Low vibration backing plate for the Flex PXE Damped foam and stainless steel High-quality Velcro for a secure hold

With the APS Detailing Hex Bit Polishing Cones, you can perform polishing tasks in tight spots with utmost precision. The polishing cones are inserted into the polishing tool via Hex Bit. This can include the Flex PXE 80 mini polisher with the appropriate Hex Bit adapter, the Flex FS140 flexible shaft, or even a drill. The polishing cones are made from high-quality foam and feature a sturdy adapter. With a diameter of 30mm and a length of 40mm, these cones are perfectly sized for perfecting grilles, door cavities, entry areas, and many interior spaces. Polishing cones for Hex Bit attachments for rotary work High-quality foam and stable adapter Perfect for Flex PXE 80 with adapter or FS140 shaft Foam Heavy Cut (green), Cutting (yellow), Polish (burgundy), Finish (orange) 30mm diameter, 40mm length

With APS Detailing Hex Bit polishing cones, you can perform polishing tasks with the highest precision in the tightest spaces. The polishing cones are used via a hex bit in polishing tools, such as the Flex PXE 80 mini polisher with a compatible hex bit adapter, the Flex FS140 flexible shaft, or even a drill. Made from high-quality foam and equipped with a sturdy adapter, these cones have perfect dimensions with a diameter of 30mm and a length of 40mm, ideal for perfecting grilles, door pockets, entry areas, and many interior sections. Polishing cones for hex bit mounts for rotary work High-quality foam and sturdy adapter Perfect for Flex PXE 80 with adapter or FS140 shaft Foam Heavy Cut (green), Cutting (yellow), Polish (burgundy), Finish (orange) 30mm diameter, 40mm length

With the APS Detailing Hex Bit Polishing Cones, you can perform polishing work with the highest precision in tight spaces. The polishing cones are inserted into the polishing tool via Hex Bit. This can be, for example, the Flex PXE 80 mini polisher with the appropriate Hex Bit adapter, the flexible shaft Flex FS140, or even a drill. The polishing cones are made of high-quality foam and equipped with a sturdy adapter. With a diameter of 30mm and a length of 40mm, the polishing cones have perfect dimensions for perfecting grilles, door recesses, entry areas, and many areas of the interior. Polishing cones for Hex Bit attachments for rotary work High-quality foam and sturdy adapter Perfect for Flex PXE 80 with adapter or FS140 shaft Foam Heavy Cut (green), Cutting (yellow), Polish (burgundy), Finish (orange) 30mm diameter, 40mm length

APS Detailing BSL is a lamp holder designed to attach the Scangrip HEAD LITE S light directly to polishing machines with M8 x10 mounting. The installation is done using the included screw; alternatively, a longer M8 screw can be used. This holder allows for better illumination of the immediate polishing area and visibility of the polishing results. Time-consuming placement, separate lighting, or annoying rearranging of lights is eliminated. Especially on hard-to-illuminate work surfaces, this lamp holder enables higher precision and faster achievement of the desired results. Holder for mounting the Scangrip HEAD LITE S Exclusively suitable for polishing machines with M8 mount - such as Flex XFE/XCE/PE Made from durable plastic Includes holder and screw without light

APS Pad Cleaner is the new efficient specialty cleaner for all polishing sponges and microfiber pads (including wool). It effectively dissolves all residues of polishing compounds, waxes, and polymer sealants, ensuring a thorough residue-free cleaning either manually or using a pad washer. The sophisticated cleaning formula of APS Pad Cleaner provides maximum gentle cleaning of pads while minimizing strain on the delicate foam cells. The pads regain their original properties, making them ready for any new challenge. The special surfactants do not harm the foam structures and help prolong the lifespan of polishing pads. Efficient, gentle, and deep cleaning Reliably dissolves dried polishing residues, wax, polymer sealants Contains corrosion inhibitors Suitable for foam, microfiber, wool Ideal in combination with pad washers

The APS FTL Plate Key Tool is a handy assistant for removing eccentric and rotary pads from the backing plate of the Flex PXE 80. This tool allows for the quick removal of both rotary and eccentric pads. Made from high-strength plastic, the tool is designed to last for years. Removes eccentric and rotary pads from the backing plate Made from durable plastic Compatible with all pads for the Flex PXE 80 mini polisher

As vehicle bodies become more intricate, 75mm polishers are often used on curves and complex designs. However, the downside of 75mm polishers is their small 75mm eccentric throw, leading to lower material removal efficiency. Many detailers seek compact, ideally battery-operated polishers with a backing pad size around 75mm and an eccentric throw of 15mm. Various conversion guides for 125mm polishers can be found online. Lake Country has had 101mm CCS-based polishing pads in their product line for some time. The inventor Felix from APS Detailing has tackled this challenge and developed a 90mm backing plate that fits perfectly with 125mm polishers like ShineMate. In combination with suitable polishing pads, it allows for breathtaking speed in correcting paint defects on complex vehicle shapes and components like mirrors, bumpers, doors, and more. 90mm backing plate for 125mm polishers Designed for up to 15mm eccentric throw Perfect for 101mm / 4 inch pads from Lake Country Advanced ventilation system Compatible with ShineMate EB351 / EX605 / EX620

The APS FTL tool key is a practical assistant for removing eccentric and rotary pads from the backing plate of the Flex PXE 80. This tool allows for easy removal of both rotary and eccentric pads. Made from high-strength plastic, it is durable for years of use. Removes eccentric and rotary pads from the backing plate Made from sturdy plastic Compatible with all attachments of the Flex PXE 80 mini polisher