Excentric Polishers: Perfection for Every Paint Surface

The Dynabrade DB8E is the result of a collaboration between the US compressed-air tool specialist Dynabrade and renowned detailer Renny Doyle. As one of the first specialist retailers in Europe, Chemical-Shark.de was able to extensively test the new forced-rotation dual action polisher. The verdict: impressive smoothness, enormous power delivery and top-level operating comfort. In this complete kit, the DB8E is not only available as an individual machine, but is perfectly matched with compounds, pads and towels for professional paint correction. Dynabrade DB8 – Technical specifications of the forced-rotation dual action polisher Forced-rotation dual action polisher (clockwise rotation) Powerful 1000-watt motor with exceptionally smooth operation 11 adjustable speed settings – up to 350 rpm rotationally 6.8 mm orbit for high defect correction with maximum control 125 mm and 150 mm backing plates included Durable 6 m power cable – ideal for workshop use Weight: 2.5 kg Dynabrade DB8E Complete Kit – Kit contents Dynabrade DB8E forced-rotation dual action polisher 5" (125 mm) and 6" (150 mm) backing plates AETERNO Zenit Pro Cut Compound 1000 g AETERNO Zenit Pro Finishing Polish 1000 g Detail Passion 125 mm Foamed Hybrid Wool Heavy Cut polishing pad Ø 140 mm Detail Passion 125 mm Therminator Super Heavy Cut polishing pad, white, Ø 125/135 mm Detail Passion 125 mm Therminator Intermediate polishing pad, blue, Ø 125/135 mm Detail Passion 125 mm Therminator Medium Polish polishing pad, maroon, Ø 125/135 mm Detail Passion 125 mm Therminator Finish polishing pad, black, Ø 125/135 mm Detail Passion Tough 2Face Double40-420gsm polishing towel, icegrey Detail Passion Tough 2Face Double40-420gsm polishing towel, seablue Handbook and operating instructions Maximum smoothness and control – uncompromising even in the complete kit The Dynabrade DB8E delivers a combination of forced rotation and exceptionally low-vibration operation that has rarely been achieved before. The state-of-the-art composite drive system ensures highly direct power transmission while providing excellent control. The 6.8 mm orbit enables precise work – even on sensitive paintwork or smaller components. At the same time, the machine offers sufficient power reserves for hard, scratch-resistant clear coats. Perfectly matched polishing system for cutting and finishing With the AETERNO Zenit Pro Cut Compound, even deeper defects, scratches and severe car-wash marks can be removed efficiently. Combined with the Foamed Hybrid Wool Heavy Cut Pad or the Therminator Super Heavy Cut Pad, it delivers enormous cutting power while maintaining controlled operation. The AETERNO Zenit Pro Finishing Polish provides the finishing touch. In combination with the Therminator Intermediate, Medium Polish or Finish Pad, holograms, haze and fine swirls can be reliably removed. The result is a deep-gloss, hologram-free finish with maximum clarity. Professional pads and towels for repeatable results The included Detail Passion Therminator Pads cover the entire range from Super Heavy Cut to Finish. Their high shape retention and precise foam structure work perfectly with the DB8E's forced rotation. The Foamed Hybrid Wool Pad combines the cutting performance of wool with the control of modern foam technology – ideal for fast defect correction. The set is completed by the high-quality Detail Passion Tough 2Face microfiber towels, which safely pick up polishing residue and enable scratch-free wipe-off. This means every step – from heavy cutting to final gloss inspection – is covered professionally. Perfectly prepared – complete kit for maximum paint correction This complete polishing machine kit provides a fully coordinated system for professional paint defect correction. The machine, compounds, pads and towels work together perfectly to enable efficient, safe and repeatable results. Whether you are dealing with heavy defects, dull paintwork or fine micro-scratches – with the Dynabrade DB8E Complete Kit, you are fully equipped from removing sanding marks through to the perfect finish. Get started now and experience professional paint preparation at the highest level.

Powerful Flex XFE 15 Dual Action Polisher with 150mm PadPerformance like a corded polisher throughout full battery lifeCDC constant electronics prevent speed fluctuationsTrigger switch for smooth start and lock for continuous operationEasy speed control with dual-side accessible dial and detentsPerfect speed range for automotive, marine, and aviation detailingExcellent for removing holograms and light scratchesNew generation brushless motor for high efficiency and powerAdvanced gearbox minimizes noise and vibrationsMagnet integration stabilizes backing plate, prevents overrunErgonomic soft-grip handles for perfect surface controlUltra-low gearbox profile for close-to-surface polishing in any positionRubberized resting surface for safe placementMicroprocessor-controlled electronics with soft start, restart protection, temperature monitoring, and overload protectionElectronic Management System (EMS) extends tool life and boosts efficiencyLED battery capacity indicatorFLEX Battery System compatible with all FLEX 18V batteriesFree-spinning Dual Action PolisherIdeal for all user levelsEasy handlingNo hologram formationLow material removal ratePerfect for finishing workTechnical SpecificationsBattery voltage: 18 VBattery capacities: 2.5 / 5.0 / 8.0 AhMax backing plate size: 150 mmPolishing stroke: 15 mmIdle speed: 1350 - 4350 rpmStroke speed: 2700 - 8700 opmWeight without battery: 2.1 kgSound pressure level (EN 60745): 72 dB(A)Vibration (EN 60745): 7.2 m/s²Included1 Special dampened hook-and-loop backing plate 150mm

Flex XFE 15 Orbital Polisher 150mmPowerful as corded polishers throughout the battery lifeCDC constant electronics prevent speed fluctuationsTrigger switch for smooth, controlled start with lock for continuous operationEasy speed adjustment via dual-access selector dial with detentsIdeal speed range for automotive, marine, and aviation sectorsPerfect for removing holograms and light scratchesNew generation brushless motor with high efficiency and performanceNewly developed high-performance gearbox for minimal noise and vibrationMagnet integration stabilizes pad rotation and prevents overrunErgonomic soft-grip handles for perfect control on the surfaceExtremely flat gear head reduces distance to surface for versatile handlingRubberized rest surface for safe placementMicroprocessor electronics with soft start, restart protection, temperature monitoring, overload protectionElectronic Management System (EMS) protects the tool, extends lifespan, and boosts efficiencyLED battery capacity indicatorFLEX battery system: compatible with all FLEX 18 V battery packsFree-running Orbital ActionSuitable for all user levelsEasy to handleNo hologram formationLow material removalPerfect for finishingTechnical SpecificationsBattery Voltage: 18 VBattery Capacity: 2.5 / 5.0 / 8.0 AhMax backing plate size: 150 mmPolishing stroke: 15 mmNo-load speed: 1350 - 4350 rpmNo-load stroke rate: 2700 - 8700 opmWeight without battery pack: 2.1 kgSound Pressure Level (EN 60745): 72 dB(A)Vibration (EN 60745): 7.2 m/s²Included in the Set1 Special 150mm Damped Hook-and-Loop Backing Plate2 5Ah 18V Batteries1 Fast Charger for 12V and 18V batteriesBattery Law Notice (BattG):Batteries must not be disposed of with household waste.End users are legally obligated to return used batteries.Return is free of charge at municipal collection points or retailers.Battery Type: Lithium-Ion

Flex XCE 8 Forced-Drive Dual-Action Polisher 150mmPowerful like a corded polisher throughout the entire battery lifeCDC constant electronics prevent speed fluctuationsVariable trigger switch for smooth startup with lock for continuous runningEasy speed adjustment via dual-side accessible dial with detentsPerfect speed range for automotive, marine and aviation detailingIdeal for removing moderate scratches, wear marks and hologramsNew generation brushless motors with high efficiency and performanceNew high-performance gearbox for maximum noise and vibration reductionAdditional external gear enables rotary forced drive with simultaneous orbital movementErgonomic soft-grip handles for perfect control on surfacesUltra-flat gearbox head reduces distance to surface for optimal handling in any positionRubberized resting surface for safe laydownMicroprocessor electronics with soft start, restart lock after power failure, temperature monitoring, overload protectionElectronic Management System (EMS) protects the tool, extends service life and boosts efficiencyLED battery capacity indicatorFLEX battery system: compatible with all FLEX 18V battery packs. Delivery without batteries and chargerTechnical DataBattery voltage: 18 VBattery capacity: 2.5 / 5.0 / 8.0 AhMax backing pad size: 150 mmPolishing stroke: 8 mmNo-load speed: 225 - 700 rpmOrbital speed: 2700 - 8700 opmWeight without battery pack: 2.0 kgSound pressure level according to EN 60745: 79 dB(A)Vibration according to EN 60745: 5.1 m/s²Contents1 special cushioned 150mm hook-and-loop backing plate2 x 5Ah 18V batteries1 fast charger for 12V and 18V batteriesNote according to Battery Act (BattG):Batteries must not be disposed of via household waste.End users are legally obliged to return used batteries.Returns can be made free of charge at municipal collection points or retail outlets.Battery type: Lithium-ion

FLEX XFE 2 21 18-EC C – Cordless Random Orbital Polisher with 21 mm OrbitThe FLEX XFE 2 21 18-EC C is a powerful 18 V cordless random orbital polisher for demanding paint correction and professional vehicle detailing. With its particularly large 21 mm polishing orbit, it enables fast work progress and shows its strengths especially on larger vehicle surfaces. It combines high correction performance with the safe and controlled polishing behavior of a free-spinning random orbital polisher – completely cordless.21 mm polishing orbit for high material removal and fast work progressFree-spinning random orbital movement for controlled polishing18 V battery operation for maximum freedom of movementHigh performance throughout the entire battery runtimeBrushless motor with high efficiency and performanceCDC constant electronics to prevent unwanted speed fluctuationsIdeal for everything from defect correction to high-gloss finishingErgonomic soft-grip areas and an especially flat gear head21 mm orbit for significantly faster work progressThe centerpiece of the FLEX XFE 2 21 18-EC C is its large 21 mm random orbital orbit. Compared with a conventional 15 mm random orbital polisher, the polishing pad moves along a significantly larger oscillation circle. This allows faster work, particularly on large surfaces, and enables high paint removal when the appropriate pad and polish combination is used.This makes the XFE 2 21 particularly suitable for bonnets, vehicle roofs, doors and other large body areas. Depending on the polishing pad and polish used, the application range extends from removing heavier paint defects and deeper scratches to achieving a high-gloss finish.125 mm or 150 mm – especially flexible backing plate optionsA major advantage for vehicle detailing is the flexibility when choosing the backing plate. The FLEX XFE 2 21 18-EC C is designed for a maximum backing plate size of 150 mm and can also be used with a 125 mm backing plate. This allows the powerful 21 mm orbit to be combined with the particularly common 125 mm plate format.The 150 mm backing plate prioritizes maximum surface coverage. The 125 mm backing plate, on the other hand, makes the machine more versatile and allows the use of more compact polishing pads. This combination is particularly interesting for professional detailers: 21 mm orbit for fast paint removal combined with the handy and universal pad size of a 125 mm backing plate.As powerful as a corded polisher – just without the cordFLEX has designed the XFE 2 21 18-EC C to deliver its high performance throughout the entire battery runtime. The integrated CDC constant electronics prevent disruptive speed fluctuations and ensure consistent operation. This allows the machine to be guided over the paint in a controlled manner even during longer polishing sessions.Trigger switch for slow and sensitive start-upLock-on function for convenient continuous operationSpeed selector wheel accessible from both sides, with detentsSoft start for a controlled start of workRestart protectionTemperature monitoring and overload protectionElectronic Management System (EMS)LED indicator for battery capacityNew brushless motor and high-performance gearboxThe machine features a new generation of brushless FLEX motors with high efficiency and performance. The motor is complemented by a newly developed high-performance gearbox designed to minimize noise and vibration. This is particularly noticeable during longer polishing jobs and supports precise machine control.An integrated magnetic solution additionally stabilizes the backing plate rotation and prevents the polishing plate from continuing to run unnecessarily for too long. As a result, the machine remains controlled when being set down and repositioned and can be used comfortably in professional everyday work.Guide the machine ergonomically and with control over the paintThe XFE 2 21 was also adapted to the requirements of professional vehicle detailing in terms of handling. Ergonomically shaped soft-grip areas enable secure guidance, while the extremely flat gear head reduces the distance between the hand and the paint surface. This allows the machine to be guided in a controlled manner in different working positions.A rubberized resting surface also allows the polishing machine to be placed down securely during work – a small but extremely practical detail in everyday use.FLEX 18 V battery systemThe FLEX XFE 2 21 18-EC C is part of the FLEX 18 V battery system and can be operated with all compatible FLEX 18 V battery packs. If you already own other FLEX 18 V machines, you can also use existing batteries for the polishing machine. The XFE 2 21 18-EC C version is supplied without a battery and without a charger.Technical data FLEX XFE 2 21 18-EC CWith a 21 mm orbit, a wide adjustable speed range and a powerful 18 V drive, the FLEX XFE 2 21 18-EC C provides the technical prerequisites for efficient paint correction from cutting to finishing.Battery voltage: 18 VPolishing principle: Free-spinning random orbitalPolishing orbit: 21 mmMax. backing plate size: 150 mmNo-load speed: 1,350–4,350 rpmNo-load orbit rate: 2,700–8,700 orbits/minDimensions L x W x H: 388 x 125 x 126 mmWeight without battery pack: 2.4 kgMotor: brushlessOrder number: 534999EAN: 4030293288393Scope of deliveryThe version with order number 534999 is the solo version of the cordless polishing machine. It is therefore particularly suitable for users who already own batteries and chargers from the FLEX 18 V system.1x FLEX XFE 2 21 18-EC C cordless random orbital polisher1x special damped hook-and-loop backing plateSupplied without batterySupplied without chargerIdeal for professional paint correction and vehicle detailingThe FLEX XFE 2 21 18-EC C is particularly appealing to vehicle detailers and demanding enthusiasts looking for a powerful random orbital polisher with a large orbit. The combination of 21 mm orbit, powerful 18 V drive and cordless freedom of movement enables fast work progress without sacrificing the advantages of a free-spinning random orbital polisher.The machine is particularly interesting for users who have previously worked with a 15 mm random orbital polisher and want greater work progress and correction performance on larger surfaces. Thanks to the additional option of using a 125 mm backing plate, the XFE 2 21 remains remarkably versatile. It is therefore a strong choice for efficient cutting, one-step polishing and demanding finishing work.

FLEX XFE 2 21 18-EC Set – Cordless Random Orbital Polisher with 21 mm Orbit The FLEX XFE 2 21 18-EC Set is the powerful complete solution for professional vehicle detailing and demanding paint correction. The free-spinning cordless random orbital polisher combines an exceptionally large 21 mm polishing orbit with a powerful 18 V battery drive, enabling rapid work progress – especially on large painted surfaces. The set already includes 2 FLEX 18 V batteries and a fast charger, making the machine ready for immediate use. 21 mm polishing orbit for high material removal and rapid work progress Complete set with 2 batteries and fast charger Powerful 18 V battery drive without a disruptive cable Free-spinning random orbital motion for controlled paint correction Maximum backing pad size of 150 mm Ideal for large vehicle surfaces and efficient defect correction Brushless motor with high efficiency and performance Suitable for everything from stronger cutting to a high-gloss finish 21 mm orbit – more material removal and faster work progress The particularly large 21 mm random orbital stroke is one of the key advantages of the FLEX XFE 2 21 18-EC. Compared with a typical 15 mm random orbital polisher, the polishing pad describes a larger oscillation circle. This allows efficient work, particularly on large surfaces, and a high degree of correction when the pad and polish are suitably combined. Hoods, roofs, doors and larger side panels can be processed particularly efficiently with the 21 mm orbit. FLEX has designed the machine for a wide range of applications – from removing deeper scratches to finishing. The XFE 2 21 is therefore suitable for intensive paint correction as well as one-step applications and multi-stage polishing processes. Ideal for 125 mm and 150 mm backing pads The flexibility of the backing pad is particularly interesting for professional vehicle detailers. The XFE 2 21 is designed for a maximum backing pad size of 150 mm, but can also be combined excellently with a 125 mm backing pad. This makes it possible to use the high material removal of the 21 mm orbit with the particularly common and easy-to-handle 125 mm format. With a 150 mm backing pad, maximum surface performance is the priority. The 125 mm backing pad, on the other hand, enables the use of more compact polishing pads and makes the machine even more versatile. The combination of a 21 mm orbit and 125 mm backing pad is particularly attractive for detailers who want rapid work progress without giving up the universal 125 mm pad format. Complete set with 2 batteries and fast charger Unlike the bare-tool version, the FLEX XFE 2 21 18-EC is supplied in this configuration as a complete cordless set. In addition to the polishing machine, the scope of delivery includes two FLEX 18 V Li-ion battery packs and the corresponding 12/18 V fast charger. This makes the set particularly suitable for users who are new to the FLEX 18 V system or are looking for a fully equipped polishing solution. 2x FLEX Li-ion battery pack 18 V 1x FLEX fast charger 12/18 V 1x damped special hook-and-loop backing pad Machine, batteries and charger in one set Ideal for getting started directly with the FLEX 18 V battery system As powerful as a corded polisher The XFE 2 21 18-EC was developed to deliver high performance throughout the entire battery runtime. The CDC constant electronics counteract unwanted speed fluctuations and thereby support consistent polishing performance. This is particularly important for demanding correction work, where constant machine performance ensures reproducible results. CDC constant electronics for consistent performance Trigger switch for a slow and controlled start Locking function for convenient continuous operation Speed selector wheel accessible from both sides, with detents Soft start and restart protection Temperature monitoring and overload protection Electronic Management System to protect the machine LED display for battery capacity Brushless motor and smooth-running high-performance gearbox The new generation of brushless FLEX motors offers high efficiency and performance. It is complemented by a newly developed high-performance gearbox designed to keep noise and vibration as low as possible. During longer polishing jobs in particular, the smooth machine operation improves user comfort and makes it easier to guide the machine in a controlled manner across the paint. An integrated magnetic solution additionally stabilizes pad rotation and prevents the polishing pad from running on unnecessarily long. This ensures controlled machine behavior when setting it down and supports comfortable handling in professional everyday use. Ergonomic handling for long polishing jobs Ergonomically shaped soft-grip areas enable secure and precise machine guidance. The particularly flat gearbox head reduces the distance between the hand and the paint surface, allowing the XFE 2 21 to be guided in a controlled manner in different working positions. A rubberized resting surface allows the polishing machine to be placed down safely during work. Together with the cordless design, this creates a machine that enables particularly comfortable and unrestricted work on larger vehicles. FLEX 18 V battery system The XFE 2 21 18-EC belongs to the FLEX 18 V battery system and can be operated with FLEX 18 V battery packs. This is particularly practical for users who already use other compatible FLEX cordless tools. The batteries included in the set can therefore also be used within the corresponding FLEX 18 V system. Technical data FLEX XFE 2 21 18-EC Set With its large 21 mm orbit, powerful battery drive and wide adjustable speed range, the FLEX XFE 2 21 18-EC offers ideal conditions for efficient professional vehicle detailing. Battery voltage: 18 V Polishing principle: Free-spinning random orbital Polishing orbit: 21 mm Max. backing pad size: 150 mm No-load speed: 1,350–4,350 rpm No-load stroke rate: 2,700–8,700 strokes/min Number of batteries supplied: 2 Charger included: Yes Dimensions L x W x H: 388 x 125 x 126 mm Weight without battery pack: 2.4 kg Order number: 535000 EAN: 4030293288409 Scope of delivery The FLEX XFE 2 21 18-EC Set includes the polishing machine and the essential components for cordless operation, providing a complete basis for immediate use. 1x FLEX XFE 2 21 18-EC cordless random orbital polisher 1x special damped hook-and-loop backing pad 2x FLEX Li-ion battery pack 18 V 1x FLEX fast charger 12/18 V For professional vehicle detailers and demanding enthusiasts The FLEX XFE 2 21 18-EC Set is particularly suitable for users looking for a powerful cordless random orbital polisher with a large orbit and requiring a complete battery package straight away. The 21 mm orbit ensures rapid work progress, especially on large painted surfaces, and provides a significantly larger pad movement range than machines with a smaller orbit. The combination of high correction performance, free-spinning random orbital motion, brushless motor and cordless 18 V drive makes the XFE 2 21 a versatile machine for cutting, one-step polishing and high-gloss finishing. With the two included batteries and fast charger, this set is the complete solution for anyone who wants to start professional paint correction directly with the new FLEX XFE 2 21.

We expect the FLEX PXCE Super PXE to be available as a bare tool from December and as a set from January. We have already been assured of an adequate quantity, so availability should be good when sales begin. Using our notification function, you can easily register your interest in the FLEX PXCE Super PXE – with no advance payment and no binding order. As soon as the machine is available from us, you will be notified and can order directly. Your order will then be dispatched immediately – by express shipping on request, of course.FLEX PXCE 18-EC C Polisher – rotary, random orbital and forced-rotation orbital in one tool The FLEX PXCE 18-EC C polisher is the new generation of compact cordless polishers from FLEX and combines three operating modes in a single tool: rotary polishing, free-spinning random orbital polishing and forced-rotation orbital polishing. This makes the PXCE ideal for professional vehicle detailers, painters and demanding detailing professionals who want to complete as many steps as possible with just one machine – from targeted sanding and paint correction to a hologram-free finish. 18 V cordless polisher Rotary, random orbital and forced-rotation operation Tool-free quick-change system for the different drive types 3, 6 and 12 mm orbit options Forced-rotation orbital mode with a 6 mm orbit For backing plates with diameters of 30, 50 and 75 mm Intuitive touch panel for speed adjustment Lock function to prevent accidental activation Variable-speed trigger for a controlled and smooth start Lock-on function for continuous operation Brushless motor for high efficiency and long service life Integrated three-stage LED light with 2,500 to 6,500 K Electronic Management System (EMS) LED battery capacity indicator Ergonomic SoftGrip surfaces Successor to the well-known FLEX PXE 80 mini polisher The FLEX PXCE can be considered the consistent further development or successor to the well-known FLEX PXE 80 mini polisher. The proven concept of an especially versatile compact machine has been transferred to the powerful 18 V cordless platform and enhanced with additional options. The popular FLEX PXE 80 will continue to be available and remains particularly interesting for very small areas, highly detailed work and users who already use the compact PXE system. The PXCE takes versatility one decisive step further. The different drive types can be changed quickly via the tool-free quick-change system. This allows the machine to be adapted to the particular work step without having to keep several polishers available. From spot removal of more severe paint defects to the final high-gloss polish, the FLEX PXCE offers an exceptionally broad range of applications. Three polishers in one – rotary, random orbital and forced-rotation orbital One of the most important features of the FLEX PXCE polisher is the ability to switch between three different operating principles. Backing plate sizes of 30, 50 and 75 mm can be used for rotary work. In free-spinning random orbital mode, the available orbit sizes are 3, 6 or 12 mm, depending on the drive used. For forced-rotation orbital work, the PXCE operates with a 6 mm orbit and can likewise be used with 30, 50 and 75 mm backing plates. This concept shows its strengths particularly on complex vehicle shapes. Narrow areas, bumpers, A- and B-pillars, mirror caps, spoilers, door sills and other hard-to-reach painted surfaces can be worked on in a controlled manner. At the same time, the 75 mm backing plate enables efficient treatment of larger sections. Rotary polishing for targeted paint correction In rotary mode, direct and effective power transmission is available. This operating mode is particularly suitable for demanding correction work, spot sanding or polishing and the targeted treatment of more severe paint defects. Thanks to the various backing plate sizes available, the PXCE can be precisely adapted to the surface being treated. Free-spinning random orbital mode for a clean finish For safe and comfortable paint polishing, the FLEX PXCE can be used as a free-spinning random orbital polisher. With a 3, 6 or 12 mm orbit, the machine's characteristics can be precisely adapted to the task at hand. Random orbital operation is ideally suited to paint correction and especially to achieving a clean, low-hologram or hologram-free finish. Forced-rotation orbital mode with a 6 mm orbit The third option is forced-rotation orbital operation with a 6 mm orbit. Here, the orbital movement is combined with powered rotation. This ensures a constant drive of the polishing pad, particularly on demanding contours, and combines high correction performance with the advantages of an orbital movement. For professional detailers, this operating mode is an interesting alternative between classic rotary operation and free-spinning random orbital polishing. Tool-free quick-change system The innovative quick-change system of the FLEX PXCE is at the heart of its high flexibility. The drives for rotary, free-spinning random orbital and forced-rotation operation can be changed without tools. This allows the polisher to be converted for another work step in a very short time. In practice, this means fewer machine changes and an especially flexible workflow. During a complete vehicle detail, different painted areas and defect patterns can be treated one after another using the same base machine. Touch panel and controlled speed adjustment The FLEX PXCE was designed for professional use. Speed can be adjusted via the intuitive touch panel. An integrated lock function helps prevent accidental activation. The variable-speed trigger also enables a slow and controlled start, allowing polish to be distributed evenly across the surface. For longer tasks, the trigger can be locked for continuous operation. Integrated three-stage LED light A special feature of the FLEX PXCE 18-EC is its integrated lighting. The three-stage LED light features an adjustable color temperature of 2,500 to 6,500 Kelvin. This makes it easier to inspect the painted surface while polishing. Depending on the paint color and ambient light, different color temperatures can help assess polishing marks and the condition of the surface more effectively. Brushless motor and optimized ergonomics The brushless motor offers high efficiency and is designed for a long service life. FLEX also uses a new motor concept in the PXCE to reduce noise and vibration. Strategically positioned SoftGrip surfaces allow for different grip positions and support controlled machine guidance during longer polishing tasks. The Electronic Management System (EMS) protects the machine, increases its efficiency and contributes to a long service life. An LED battery capacity indicator also provides information about the current charge level of the battery being used. Technical data of the FLEX PXCE 18-EC FLEX combines the compact design with a powerful 18 V drive. The maximum backing plate size is 75 mm. Depending on the drive type used, different speed or orbit-rate ranges are available. Battery voltage: 18.0 V Max. backing plate size: 75 mm Polishing orbit: 3 / 6 / 12 mm Tool holder: Quick-change system No-load speed: 1,000 – 6,000 rpm No-load orbit rate: 2,000 – 12,000 /min Weight without battery pack: 1.1 kg Scope of delivery FLEX PXCE 18-EC C – order number 535577 The FLEX PXCE 18-EC C with order number 535577 offered here forms the basis of the versatile PXCE system. According to the FLEX data sheet, the scope of delivery includes the machine, the 6 mm forced-rotation orbital drive and a 75 mm backing plate. 1 x FLEX PXCE 18-EC C cordless polisher 1 x DT-XC 6 PXCE 1 x BP-M D 75 PXCE Other versions of the FLEX PXCE In addition to the FLEX PXCE 18-EC C, order number 535577 described here, the new polisher is also available in other configurations. This includes the comprehensive PXCE 18-EC Set with order number 535578. In addition to the machine, it contains numerous interchangeable drives and backing plates as well as a charger and batteries, providing an especially comprehensive introduction to the complete PXCE system. The various versions allow you to select the FLEX PXCE to suit your existing FLEX 18 V battery system and your intended application. FLEX PXCE – one polisher for almost every work step With the FLEX PXCE 18-EC, FLEX presents an exceptionally versatile cordless polisher for modern vehicle detailing. The combination of rotary, free-spinning random orbital and forced-rotation orbital operation, the tool-free change system and the various backing plate sizes make it a flexible solution for a wide range of painted surfaces. Anyone who appreciates the well-known FLEX PXE 80 but is looking for a powerful 18 V polisher with an expanded range of applications will find the logical next generation in the FLEX PXCE.

We expect the FLEX PXCE Super PXE to be available as a bare kit from December and as a set from January. We have already been promised a sufficient quantity, so availability should be good when sales start. Using our notification feature, you can easily register your interest in the FLEX PXCE Super PXE – with no deposit and no binding order. As soon as the machine is available from us, you will be notified and can order directly. Your order will then be dispatched immediately – by express shipping on request, of course.FLEX PXCE 18-EC Set 535578 – rotary, random orbital and forced-rotation polisher as a complete set The FLEX PXCE 18-EC Set with order number 535578 is the comprehensive complete set of FLEX's new compact 18 V polisher. The FLEX PXCE polishing machine combines three different operating modes in one machine: rotary polishing, random orbital polishing with free rotation and random orbital polishing with forced rotation. The 535578 set already includes the various interchangeable drives, several backing plates, batteries and a charger. This gives you an especially versatile system for almost all polishing tasks – from targeted sanding and intensive defect correction to a hologram-free high-gloss finish. Comprehensive FLEX PXCE 18-EC complete set Rotary, free-spinning random orbital and forced-rotation operation in one machine 3, 6 and 12 mm random orbital throws 6 mm forced-rotation throw 30, 50 and 75 mm backing plates included in the set Tool-free quick-change system 18 V battery system for cordless operation 2 x 2.5 Ah battery packs included CA 12/18 charger included Intuitive touch panel for speed adjustment Integrated three-stage LED light with 2,500 to 6,500 K Brushless motor for high efficiency and long service life Ideal for professional vehicle preparation, paint shops and detailing The new generation after the well-known FLEX PXE 80 The FLEX PXCE 18-EC is the logical development and successor to the well-known FLEX PXE 80 mini polisher. The successful principle of a compact machine with interchangeable drives has been transferred to the powerful FLEX 18 V platform in the PXCE and expanded with additional applications. The proven FLEX PXE 80 remains available and is particularly interesting for users looking for an especially small and lightweight machine for intricate work. By contrast, the FLEX PXCE is aimed at users who want to cover a significantly wider range of tasks with a single cordless tool. Thanks to different backing plate sizes and drive types, the machine can be used on small, hard-to-reach paint areas as well as larger sections. The Super Set 535578 for maximum flexibility The major advantage of the FLEX PXCE 18-EC Set 535578 lies in its extensive scope of delivery. While the basic version 535577 is supplied with selected components only, set 535578 contains the various drives for rotation, free-spinning random orbital operation and forced rotation, as well as different backing plates. Batteries and a charger are also included in the set. This means that the full potential of the FLEX PXCE can be used virtually straight away. This is particularly interesting for professional detailers: instead of having to use several separate machines for different work steps, the PXCE can be adapted to the task at hand by quickly changing the drive. This provides the right operating mode for heavier defects as well as for small paint areas, complex contours or the final finish. Three drive types in a single FLEX polishing machine The FLEX PXCE polishing machine combines three fundamentally different polishing principles. In rotary mode, the backing plate rotates directly and provides high correction performance. In free-spinning random orbital mode, the machine combines an oscillating movement with particularly controllable polishing characteristics. In addition, a 6 mm forced-rotation random orbital drive is available, in which the backing plate rotation is actively driven. This combination allows the PXCE to be used for a wide variety of paint conditions and processing steps. Especially in professional detailing, this enables an efficient workflow, as in many cases only the drive or backing plate needs to be changed. Rotary operation for maximum, precise correction For rotary work, the FLEX PXCE provides direct power transmission and is therefore ideally suited to demanding correction work. Depending on the backing plate used, small paint defects can be treated with great precision or larger sections can be processed efficiently. Backing plate sizes of 30, 50 and 75 mm are possible for rotary work. The compact design offers particular advantages on bumpers, mirror caps, A- and B-pillars, spoilers, door sill areas and other complex vehicle parts. Free-spinning random orbital operation with a 3, 6 or 12 mm throw As a free-spinning random orbital polisher, the FLEX PXCE 18-EC can be used with different throws. The set contains the corresponding drives for 3, 6 and 12 mm random orbital throws. This allows the machine's behavior to be precisely adjusted to the task at hand. A short throw is particularly suitable for controlled work on small or complex surfaces. The larger 12 mm throw, on the other hand, enables more efficient processing of suitable paint areas. This allows the machine to be used both for defect correction and fine finishing work. Forced-rotation random orbital operation with a 6 mm throw Another special feature is the forced-rotation random orbital drive with a 6 mm throw. Unlike a free-spinning random orbital drive, the rotation of the polishing pad is actively driven. This means the movement is maintained even under load. This makes forced rotation particularly interesting for demanding areas and users who want a combination of good correction performance and an orbital polishing movement. Backing plate sizes of 30, 50 and 75 mm can be used in forced-rotation mode. This also allows this operating mode to be flexibly adapted to the size of the respective paint area. Tool-free quick-change system The innovative quick-change system of the FLEX PXCE allows the different drives to be replaced without additional tools. This concept is what turns the compact cordless polisher into an especially versatile polishing system. Switching between rotary, free-spinning random orbital and forced-rotation operation can be carried out quickly. This saves time in everyday work and reduces the number of machines required. This flexibility is a major advantage, especially during complete vehicle preparation, where surfaces of different sizes and different types of defects need to be treated. 30, 50 and 75 mm – for small details and larger surfaces With different backing plate sizes of 30, 50 and 75 mm, the FLEX PXCE set covers a wide range of vehicle preparation applications. Small plates allow very precise work in tight and angled areas, while the 75 mm plate enables much more efficient processing of larger sections. This makes the FLEX PXCE suitable for mirror caps, door handles and handle recesses, bumpers, narrow pillars, spoilers, door sills and many other areas where conventional large polishers reach their limits. Intuitive touch panel and controlled machine start The speed of the FLEX PXCE 18-EC is adjusted via an intuitive touch panel. A lock function prevents accidental activation. The machine also features a variable-speed trigger that enables a slow and controlled start. This allows the machine to be positioned in a controlled manner and the polish to be distributed evenly across the surface. For longer polishing jobs, the switch can be locked for continuous operation. The combination of electronic control and ergonomic operation makes the PXCE suitable for both short detailing work and longer polishing processes. Integrated LED light with three color temperatures An LED light with three settings and a color temperature of 2,500 to 6,500 Kelvin is integrated directly into the machine. This provides additional illumination of the paint surface during work. The different color temperatures make visual inspection easier on different paint colors and under varying lighting conditions. Good lighting is particularly important during finishing or when checking previously treated paint areas in order to identify any remaining polishing marks or defects. Brushless motor and optimized motor concept The FLEX PXCE uses a brushless motor that combines high efficiency with a long service life. A newly developed motor concept is designed to minimize noise and vibration. This improves operating comfort, especially during longer periods of use. The Electronic Management System (EMS) protects the machine, extends its service life and increases efficiency. Optimally positioned SoftGrip surfaces allow different grip positions and support safe, controlled guidance of the polishing machine. Technical data of the FLEX PXCE 18-EC Despite its extensive range of applications, the FLEX PXCE remains compact. The machine operates with the FLEX 18 V battery system and achieves the speeds and orbit rates required for correction and finishing work, depending on the operating mode. Battery voltage: 18.0 V Max. backing plate size: 75 mm Polishing throw: 3 / 6 / 12 mm Tool holder: interchangeable system No-load speed: 1,000–6,000 rpm No-load orbit rate: 2,000–12,000 /min Weight without battery pack: 1.1 kg Motor: brushless Scope of delivery FLEX PXCE 18-EC Set – order number 535578 With order number 535578, you receive the FLEX PXCE as a particularly comprehensively equipped set. In addition to the polishing machine itself, the set includes the different interchangeable drives, several backing plates, two batteries and the matching charger. This provides all the key components for rotary, free-spinning random orbital and forced-rotation work. 1 x FLEX PXCE 18-EC C polishing machine 1 x DT-P PXCE 1 x EXS PXCE 1 x DT-XF 3 PXCE 1 x DT-XF 6 PXCE 1 x DT-XF 12 PXCE 1 x DT-XC 6 PXCE 1 x BP-M D 30 PXCE 1 x BP-M D 50 PXCE 1 x BP-M D 75 PXCE 1 x BP-M/SR D 30 PXCE 1 x CA 12/18 charger 2 x 2.5 Ah battery packs FLEX PXCE 535578 – the complete set for professional vehicle preparation Anyone who wants to use the full range of applications offered by the new FLEX polishing machine PXCE gets a particularly comprehensive solution with set 535578. Rotary operation for intensive and targeted correction, free-spinning random orbital operation with different throws for controlled polishing work, and a 6 mm forced-rotation random orbital drive are combined in one compact 18 V system. Together with the different backing plates from 30 to 75 mm, this creates a polishing machine that can be used for everything from small detail areas to efficient paint correction. The tool-free interchangeable system, brushless motor, integrated lighting and FLEX 18 V battery system complete the concept. This makes the FLEX PXCE 18-EC 535578 particularly interesting for professional detailers and demanding enthusiasts who want to cover as many polishing tasks as possible with a single flexible machine system. FLEX PXCE or FLEX PXE 80? The new FLEX PXCE 18-EC adopts many of the ideas that have already made the FLEX PXE 80 a popular mini polisher, but significantly expands the concept. The PXCE offers the powerful 18 V system, backing plate sizes up to 75 mm and a particularly broad range of drive types. The FLEX PXE 80 remains part of the FLEX range and retains its strengths as an especially compact mini polisher for very small and intricate work areas. However, anyone looking for maximum versatility and a comprehensively equipped system will find the new generation for demanding polishing work in the FLEX PXCE Set 535578.

Flex XCE 2 8 Forced Rotation Polisher brushless 14-EC C 125/150 mm The Flex XCE 2 8 Forced Rotation Polisher brushless 14-EC C is an extremely powerful Flex polisher specially designed for maximum correction performance. Unlike free-running dual action polishers, this machine operates with forced rotation. This results in significantly higher material removal, even on hard or heavily weathered paint. The 8 mm orbit combined with forced rotation makes it the ideal choice for efficient one-step polishes and removing more severe paint defects. Forced rotation polisher for consistent, powerful cut Significantly more material removal than free-running DA polishers 8 mm orbit for controlled, effective paint correction Perfect for one-step polishes and deeper paint defects Brushless high-performance motor for steady power Quiet operation and speed-stable under load 6 meter cable for maximum freedom of movement Professional polisher for detailing, workshops, and dealerships Thanks to the forced rotation, the backing plate of the Flex XCE 2 8 stays in constant motion – even on edges, curves, or under higher pressure. This ensures uniform, reproducible cutting and makes the polisher especially effective on weathered paint, wash scratches, and deeper defects. The powerful brushless motor guarantees high efficiency, low heat generation, and long lifespan. Combined with the precisely tuned 8 mm orbit, it offers a controlled polishing behavior with significantly higher correction power compared to classic dual action polishers. Ergonomically, the Flex forced rotation polisher also excels: Its balanced design fits securely in hand, reduces vibrations, and allows fatigue-free working – even during longer polishing sessions or intense one-step corrections. For professional use, the Flex XCE 2 8 polisher comes with a 6 meter long cable, providing optimal freedom of movement and efficient, uninterrupted workflow in workshops, dealerships, or detailing studios. The package contents of the Flex XCE 2 8 Forced Rotation Polisher are thoughtfully composed: Polisher FLEX XCE 2 8 with 8 mm orbit and forced rotation With dampened 150 mm hook-and-loop backing plate User manual and warranty terms Not included is the 125 mm backing plate. It can be purchased separately to adapt the forced rotation polisher flexibly to smaller surfaces or specific applications. The Flex XCE 2 8 Forced Rotation Polisher is the perfect choice for those seeking an uncompromisingly powerful Flex polisher to effectively correct severe paint defects and achieve top results in the one-step process.

Powerful Flex XCE 8 Forced Rotation 150mm Cordless PolisherDelivers corded-level power throughout entire battery lifeCDC constant electronics prevent speed fluctuationsThrottle trigger allows smooth start and lock for continuous useEasy dual-side adjustable speed dial with detents for precise controlIdeal speed range for automotive, marine, and aviation detailingPerfect for removing moderate scratches, wear marks, and hologramsNew generation brushless motor with high efficiency and performanceAdvanced high-performance gearbox reduces noise and vibrationsAdditional external gear enables forced rotation with orbital motionErgonomic soft grip handles for perfect surface controlExtra-flat gear head minimizes distance to surface for better handlingRubberized resting surface ensures safe placementMicroprocessor electronics with soft start, restart protection, temperature monitoring, and overload protectionElectronic Management System (EMS) extends machine life and boosts efficiencyLED battery capacity indicatorFLEX battery system compatible with all FLEX 18V packs - battery and charger not includedTechnical DataBattery voltage: 18 VBattery capacity: 2.5 / 5.0 / 8.0 AhMax backing plate size: 150 mmPolishing stroke: 8 mmNo-load speed: 225 - 700 rpmOrbital speed: 2700 - 8700 opmWeight without battery pack: 2.0 kgSound pressure level (EN 60745): 79 dB(A)Vibration (EN 60745): 5.1 m/s²Includes1 special cushioned hook-and-loop backing plate 150mm

Flex XFE 2 15 Rotary Polisher Brushless 14-EC C 125/150 mm The Flex XFE 2 15 Rotary Polisher Brushless 14-EC C is the latest generation of powerful rotary polishers from Flex. Compared to its predecessor, this model has been significantly enhanced in key areas. The new brushless high-performance motor delivers more power, runs more efficiently, and ensures consistent high performance even under demanding polishing tasks. The 15 mm orbit guarantees high material removal with an excellent finish. 15 mm orbit for efficient paint correction and flawless finish Significantly increased motor power compared to previous model New ergonomic design for maximum control Latest generation brushless motor for efficiency and durability Optimized cooling system at the polishing pad reduces heat buildup 6-meter cable length for greater freedom of movement Free-spinning rotor ensures hologram-free paint surfaces Ideal for beginners and professionals alike Perfect for dealerships, detailing shops, and professional car care The noticeably higher motor power results from cutting-edge motor technology combined with the perfectly tuned 15 mm orbit. This combo delivers stronger torque, stable RPMs under load, and a uniform polishing result — ideal for professional use and effective hologram-free paint correction. Ergonomics also set new standards with the XFE 2 15: the newly developed design fits perfectly in the hand, reduces fatigue, and provides precise control. Especially during long polishing sessions with the powerful 15 mm orbit, users benefit from smooth, controlled operation. Another highlight is the optimized cooling system right at the polishing pad. This innovation effectively dissipates heat from the backing plate, pad, and paint surface. The result is longer working intervals, less thermal stress, and significantly better material protection — even during intensive polishing runs. For maximum practicality in professional daily use, the cable length was extended to 6 meters. This provides much more freedom of movement, reduces plug changes, and enables a smooth and efficient workflow in workshops, dealerships, or detailing studios. The scope of delivery for the Flex XFE 2 15 brushless 14-EC C is optimized for professional use and includes all essential components for immediate start: FLEX XFE 2 Polisher with 15 mm orbit Hex key for polishing pad change 150 mm polishing pad Manual and warranty conditions Not included is the 125 mm polishing pad, which can be purchased separately to adapt the machine to smaller areas or specific polishing tasks. The Flex XFE 2 15 brushless 14-EC C is the perfect choice for dealerships, professional detailers, and car care companies seeking a powerful rotary polisher with 15 mm orbit, excellent ergonomics, and uncompromising hologram-free results.

FLEX XFE 2 21 14-EC C – Random Orbital Polisher with 21 mm Orbit and 1,400 W The FLEX XFE 2 21 14-EC C is a powerful, corded random orbital polisher for professional paint correction and demanding vehicle detailing. With an impressive 1,400 watts of power and an especially large 21 mm polishing orbit, it is designed for high material removal and fast work progress. The large orbit shows its strengths particularly on larger paint surfaces – from intensive defect correction to a high-gloss finish. 21 mm polishing orbit for high material removal and fast work progress 1,400 watts rated power input Free-spinning random orbital movement for controlled polishing 6 m PUR cable for plenty of freedom of movement Brushless motor with high efficiency and power output Maximum backing plate size of 150 mm Ideal for large vehicle surfaces Suitable for everything from treating deeper scratches to finishing 21 mm orbit – when fast paint removal is required The large 21 mm random orbital movement is the defining feature of the FLEX XFE 2 21 14-EC C. Compared with conventional random orbital polishers with, for example, a 15 mm orbit, the polishing pad moves along a larger oscillation circle. This enables particularly fast work progress on larger surfaces and makes the machine an interesting choice for extensive paint correction. Hoods, roofs, doors and large side panels can therefore be processed especially efficiently. In combination with an abrasive polishing pad and a suitable cutting compound, more severe paint defects can be corrected. With a softer pad and a finishing polish, the same machine can subsequently be used to achieve a high-gloss finish. 125 mm or 150 mm backing plate – versatile use The FLEX XFE 2 21 14-EC C is designed for a maximum backing plate size of 150 mm. Vehicle detailers will particularly appreciate the option of using the machine with a 125 mm backing plate. This combines the large 21 mm orbit with the especially common and versatile 125 mm pad format. With a 150 mm backing plate, maximum surface performance is the priority. A 125 mm backing plate, on the other hand, allows the use of more compact polishing pads and increases flexibility when working on different body shapes. The machine can therefore be ideally adapted to the vehicle size, component and desired polishing system. 1,400 watts for consistently powerful polishing With a power input of 1,400 watts, the FLEX XFE 2 21 14-EC C offers ample power reserves for demanding polishing work. The corded design is particularly advantageous for continuous professional use: no battery changes, no charging breaks and a constantly available power supply. The generous 6 m PUR cable provides plenty of freedom of movement around the vehicle. The XFE 2 21 14-EC C therefore combines the benefits of a powerful mains-powered machine with a large operating range. Modern electronics for controlled operation The integrated microprocessor electronics support controlled and consistent polishing performance. The speed can be adjusted to suit the respective combination of paint, polish and polishing pad and is electronically maintained at a constant level under load. Infinitely variable speed preselection Constant speed control via tachogenerator Overload protection Restart protection Temperature monitoring Throttle switch for slow and smooth start-up Lock-on function for comfortable continuous operation Speed adjustment wheel with detents, accessible from both sides Brushless motor and new high-performance gearbox For the XFE 2 21 14-EC C, FLEX relies on a new generation of brushless motors with high efficiency and power output. Combined with the newly developed high-performance gearbox, this creates a powerful polisher designed to reduce noise and vibration levels at the same time. A smooth machine operation is an important factor, especially during longer polishing jobs. Reduced disruptive vibrations improve operating comfort and support precise guidance of the polishing pad across the paint surface. Flat gear head and ergonomic handling The extremely flat gear head reduces the distance between the hand and the paint surface. This allows the machine to be guided precisely and in a controlled manner in different working positions. Ergonomically shaped soft-grip handle areas additionally support secure machine handling. The rubberized resting surface is also practical for everyday use. The polisher can be safely set down during work without unnecessarily slipping on sensitive surfaces. From cutting to a high-gloss finish The large orbit does not make the XFE 2 21 14-EC C a pure cutting machine. By selecting the appropriate polishing pad and polish, the machine can be used for different correction stages. FLEX explicitly describes its range of applications as extending from treating deeper scratches to finishing. This makes the machine suitable for both multi-stage paint correction and efficient one-step applications. For the professional vehicle detailer, this means one machine for fast work progress, defect correction and a final deep gloss. Technical data FLEX XFE 2 21 14-EC C With 1,400 watts, a 21 mm polishing orbit and a wide speed range, the FLEX XFE 2 21 14-EC C is consistently designed for performance-oriented polishing work. The long PUR power cable also provides a large working radius around the vehicle. Power input: 1,400 W Voltage: 230 V Frequency: 50/60 Hz Polishing principle: Free-spinning random orbital Polishing orbit: 21 mm Max. backing plate size: 150 mm No-load speed: 1,350–4,350 rpm No-load stroke rate: 2,700–8,700 strokes/min Cable length: 6 m Cable type: PUR Dimensions L x W x H: 425 x 125 x 128 mm Weight: 2.6 kg Order number: 535001 EAN: 4030293288416 Scope of delivery The FLEX XFE 2 21 14-EC C is supplied with a cushioned special hook-and-loop backing plate, providing a powerful basis for an individually configured polishing system. 1x FLEX XFE 2 21 14-EC C random orbital polisher 1x cushioned special hook-and-loop backing plate Ideal for professional vehicle detailing The FLEX XFE 2 21 14-EC C is particularly interesting for professional detailers, vehicle reconditioning specialists and ambitious users who value high material removal and fast work progress in a random orbital polisher. The 21 mm orbit is especially noticeable on large surfaces and enables efficient treatment of entire vehicles. Anyone looking for greater surface performance than a conventional 15 mm random orbital polisher while also wanting the benefits of a free-spinning random orbital machine will find a powerful solution here. With 1,400 watts, a 21 mm orbit and a 6 m PUR cable, the XFE 2 21 14-EC C is ideally equipped for extensive polishing work without battery changes or charging interruptions.

Rupes BigFoot LHR125E Duetto Dual-Action Polisher 125 mm STD Kit The Rupes BigFoot LHR125E Duetto is a powerful dual-action polisher for professional paint correction and efficient finishing. With its 15 mm orbit and 125 mm backing plate, it combines high polishing performance with precise control and is suitable for a wide range of polishing applications on automotive paintwork. The increased 15 mm orbit improves polishing efficiency and working performance. The new PrecisionPro backing plate supports an especially smooth and controlled operation. New POLYSYNTHEC gear wheels reduce noise and vibrations, thereby increasing user comfort. The redesigned construction combines a modern machine design with the proven balance and precision of the LHR12E. The 125 mm backing plate provides a versatile working size for numerous paint surfaces and vehicle areas. 15 mm Orbit for Efficient Paint Correction The 15 mm orbit enables efficient treatment of medium-sized and larger paint surfaces while offering excellent control. Swirls, light to medium scratches, oxidation and other paint defects can be specifically treated. The balanced combination of orbit, power and machine balance makes the LHR125E suitable for both correction work and finishing polishing steps. High Working Comfort and Controlled Operation The redesigned construction of the Rupes BigFoot LHR125E Duetto is designed for quiet and comfortable operation. POLYSYNTHEC gear components help reduce noise and vibrations, while the PrecisionPro backing plate supports precise and even movement. Technical Data With 400 watts of power, electronic speed control and an operating range of 3,000 to 5,500 rpm, the LHR125E Duetto offers versatile adjustment for different polishes, polishing pads and paint conditions. Backing plate: 125 mm / 5" Orbit: 15 mm / 19/32" Power: 400 W Speed: 3,000–5,500 rpm Weight: 2 kg Electronic speed control: Yes Spindle thread: M8-F Backing plate: 980.720 Power cable: 9 m / 30 ft STD Kit The STD version provides the professional foundation for an individually configured polishing system. Polishing pads and compounds can be selected according to the specific paint condition, desired correction level and finish.

The newly developed Rupes LHR15 Mark V polishing machine is the successor of the popular Mark III. It is the wired version of the HLR15 battery polishing machine, which Rupes introduced a few months earlier featuring a new gearbox and backing plate. It shares the drive unit and significantly improved running smoothness with this machine compared to its predecessor. Despite higher comfort, the machine is more powerful and now comes with a 9m cable. Completely newly developed free-running eccentric New anti-spinning ring Extreme running smoothness New gearbox technology LHR15 Mark V Bigfoot STD LHR15 MarkV Eccentric Polishing Machine Backing plate 125mm Delivered in a box including warranty card and manual

Rupes BigFoot LHR75II Dual-Action Polisher 75 mm STD Kit The Rupes BigFoot LHR75II is a compact dual-action polisher for precise polishing work on small and hard-to-reach painted surfaces. With its 12 mm orbit and compact 75 mm format, it is ideal for bumpers, pillars, spoilers, narrow bodywork areas and detailing work. The revised generation combines excellent control with improved user comfort and efficient polishing performance. New POLYSYNTHEC gear wheels reduce noise, vibration and weight, enabling more comfortable and controlled operation. The newly designed head cover increases the machine's durability, while the 12 mm orbit provides high polishing performance on small surfaces. Non-slip rubber inserts improve grip and support precise guidance of the polisher. The easily accessible speed control allows quick adjustment of the speed to the paint condition, polish and polishing step. The compact 75 mm backing plate makes the LHR75II the ideal complement to larger BigFoot polishers. Precise Paint Correction on Small Surfaces Combining a compact machine head, a 12 mm orbit and 400 watts of power, the Rupes LHR75II offers a balanced combination of cutting performance and control. This allows swirls, light scratches, sanding marks and other paint defects to be treated precisely. The compact machine format is particularly advantageous on contoured or narrow bodywork areas. Technical Data The Rupes BigFoot LHR75II was specifically developed for controlled detailing work and offers compact dimensions as well as a practical speed range. Backing plate: 75 mm / 3" Orbit: 12 mm / 1/2" Power: 400 W Speed: 3,000–5,500 rpm Weight: 1.8 kg Electronic speed control: Yes Spindle thread: M6-F Backing plate: 990.007 Power cable: 9 m / 30 ft STD Kit The STD version provides the professional foundation for individually configuring the polishing system. Polishing pads and compounds can be selected to suit the respective paintwork, defect pattern and desired polishing result.

With the free-running orbital polisher EX620, the Asian manufacturer ShineMate expands its product range and applies the processing and material quality known and appreciated from the battery polisher EB351 to corded polishers. The new generation features an optimized 800W motor designed for maximum performance and user-friendliness. The EX620 polisher meets both enthusiast and professional demands at a very attractive price. Unmatched Powerful 125mm Orbital Polisher Powered by a carbon brush electric motor, the polisher achieves 3,000 to 5,800 orbital rotations per minute. With these performance values, an unprecedented cut for orbital polishers is achieved; compared to the previous model EX610, the rotation speed has been increased by 30% and the torque by 60%. A sophisticated cooling system ensures that prolonged operation at this performance level is feasible without overheating. The weight is 2.6kg and the orbital stroke is 15mm. Perfect Ergonomics for Polishing Enjoyment The housing of the EX620 orbital polisher is made of high-quality plastic with a rubberized soft grip for secure handling in the grip and guiding areas. All materials are designed for maximum durability. The infinitely variable selection switch allows you to adjust the power in 6 stages from distributing polish to heavy cutting. The operation begins with a switch that enables a soft startup. A locking button allows for continuous operation. The backing pad is equipped with an advanced cooling system, and any polishing dust generated is blown away. The eccentric weight is CNC manufactured from high-strength metal. EX620 125mm Orbital Polisher - 15mm Stroke Free-running 15mm orbital polisher EX620 with 125mm backing pad 5m cable 125mm backing pad Hex tool for changing the backing pad Heavy Cut Microfiber Polishing Pad Medium Cut Microfiber Polishing Pad Finishing Foam Polishing Pad Instruction manual Hex tool for changing the backing pad

Designed and manufactured for commercial and industrial use, ShineMate began marketing its 18V technology in 2019. With the EB351 battery excenter polisher, available from us as an official distributor in several variants and sets, a benchmark for battery-operated excenter polishers is set. The free-running excenter with a 125mm backing pad is both powerful and robust. With numerous features and carefully selected materials, ShineMate demonstrates the immense effort invested in design and manufacturing quality.Unmatched Powerful Battery Excenter with 125mm Backing PadPowered by a brushless electric motor, the polisher delivers 2,000 to 5,000 orbital rotations per minute. The lithium-ion batteries, with 2 included in both sets, have a capacity of 5Ah and allow for an operating time of about 45 to 60 minutes. The charger fully charges the batteries in approximately 60 minutes. The weight is 1.84kg without batteries. Depending on the model, the excenter stroke is either 12mm or 15mm.Perfect Ergonomics for Polishing PleasureThe housing of the EB351 battery excenter polisher is made from high-quality plastic with a rubberized soft grip for a secure hold in the grip and guidance areas. All materials are designed for maximum durability. The infinitely adjustable switch lever allows the adjustment of power in 6 stages, from spreading the polish, polishing to heavy cutting. The operation is initiated with a trigger switch that enables gentle startup. A locking button allows for constant operation. The backing pad is equipped with an advanced cooling system while blowing out any polish dust that may arise. The excenter weight is CNC-designed from high-strength metal. Whether the choice is the 12mm or 15mm stroke, both variants are optimized for minimal vibrations.Bare Kit, Charger Set, or Full Set: Variants for Cordless PolishingContents of the Bare KitFree-running battery excenter EB351Hex tool for changing the backing padContents of the Charger SetFree-running battery excenter EB351Two 5Ah 18V batteriesDual battery chargerHex tool for changing the backing padContents of the Full SetFree-running battery excenter EB351Two 5Ah 18V batteriesDual battery chargerNylon tool bag for all componentsHeavy Cut Microfiber Polishing PadMedium Cut Microfiber Polishing PadFinishing Foam Polishing PadHex tool for changing the backing pad

Designed and manufactured for commercial and industrial use, ShineMate launched its 18V technology back in 2019. The EB351 cordless polisher, available from us as an official distributor in various variants and sets, sets the benchmark for battery-powered random orbital polishers. The free-spinning eccentric with a 125mm backing pad is both powerful and durable. With numerous features and selected materials, ShineMate demonstrates the tremendous effort invested in design and manufacturing quality. Unmatched Powerful Cordless Eccentric with 125mm Backing Pad Driven by a brushless electric motor, the polisher delivers between 2,000 and 5,000 orbital RPM. The lithium-ion batteries, with 2 included in both sets, have a capacity of 5Ah and provide a runtime of approximately 45 to 60 minutes. The charger fully charges the batteries in about 60 minutes. The weight is 1.84kg without batteries. Depending on the model, the eccentric stroke is either 12mm or 15mm. Perfect Ergonomics for Polishing Enjoyment The casing of the EB351 cordless polisher is made from high-quality plastic with a rubberized soft grip for secure handling in grip and guiding areas. All materials are designed for maximum load. The stepless selection lever allows you to adjust the power in 6 stages from polishing product distribution to polishing and heavy cutting. The operation starts with an activation switch that enables smooth startup. A lock button can be used to secure the operation. The backing pad features an advanced cooling system while simultaneously blowing away any polishing dust that may form. The eccentric weight is manufactured from high-strength metal using CNC technology. Whether you choose the 12mm or 15mm stroke, both variants are optimized for minimal vibrations. Bare Kit, Charger Set, or Full Set: Cordless Polishing Options Contents of the Bare Kit Free-spinning cordless eccentric EB351 Hex tool for changing the backing pad Contents of the Charger Set Free-spinning cordless eccentric EB351 Two 5Ah 18V batteries 2-bay battery charger Hex tool for changing the backing pad Contents of the Full Set Free-spinning cordless eccentric EB351 Two 5Ah 18V batteries 2-bay battery charger Nylon tool bag for all components Heavy Cut Microfiber Polishing Pad Medium Cut Microfiber Polishing Pad Finishing Foam Polishing Pad Hex tool for changing the backing pad

Designed and manufactured for commercial and industrial use, ShineMate launched its 18V technology in 2019. The cordless orbital polisher EB351 sets the benchmark for battery-operated polishers. With a free-spinning orbital and a 125mm backing plate, it’s powerful and built to last. ShineMate has shown considerable effort in design and manufacturing quality through its numerous features and selected materials. Unmatched Power: 125mm Cordless Orbital Polisher Driven by a brushless electric motor, this polisher delivers 2,000 to 5,000 orbital revolutions per minute. The lithium-ion batteries included in both sets have a capacity of 5Ah, allowing for approximately 45 to 60 minutes of operation. The charger fully charges the batteries in about 60 minutes. It weighs 1.84kg without batteries. Depending on the model, the orbital stroke is either 12mm or 15mm. Perfect Ergonomics for Polishing Enjoyment The housing of the EB351 cordless polisher is made from high-quality plastic with a rubberized soft grip for secure handling. All materials are designed to withstand heavy use. The infinitely variable switch allows for 6 performance levels ranging from polish distribution to heavy cutting. Start-up is easy with a trigger switch providing gentle acceleration. A lock button helps maintain continuous operation. The backing plate features an advanced cooling system that also blows out any polishing dust. The orbital arm is crafted from high-strength metal using CNC technology. Whether you choose the 12mm or 15mm stroke, both options are optimized for minimal vibrations. Charger Set or Full Set: Your Options for Cordless Polishing Charger Set Contents Free-spinning Cordless Orbital EB351 Two 5Ah 18V batteries Dual battery charger Hex tool for backing plate change German manual Full Set Contents Free-spinning Cordless Orbital EB351 Two 5Ah 18V batteries Dual battery charger Nylon tool bag for all components Heavy Cut Microfiber Polishing Pad Medium Cut Microfiber Polishing Pad Finishing Foam Polishing Pad Hex tool for backing plate change German manual

ShineMate EB210 – The Ultimate Cordless Mini Polisher & Spot Sander The ShineMate EB210 is a powerful cordless mini polisher featuring an innovative quick-change system, capable of both dual-action sanding and polishing. Its compact design and strong performance allow for precise work in hard-to-reach areas – perfect for smart repair, paint correction, and spot polishing. Key Features of the ShineMate EB210 Versatile usage: Polish & sand with rotary and dual-action movements Compact design: Ideal for tight spaces and tricky spots Innovative quick-change system: Effortless switch between rotary and dual-action polishing High-performance battery: Cordless operation with a 10.8V battery for maximum flexibility Premium bare kit: Includes just the machine and 75mm backing plate for custom setups Precise speed control: Orbital speed: 3,000–8,000 RPM Rotary speed: 700–8,000 RPM Technical Specifications Model: EB210 Battery Voltage: 10.8V DC Max Backing Plate Size: 75 mm Speed Range: Orbital: 3,000–8,000/min Rotary: 700–8,000 RPM Warranty: 2 years on battery and machine Included in the ShineMate EB210 Bare Kit (No Accessories / No Batteries) This bare kit contains only the machine and a 75mm backing plate, perfect for users who want to build their own set with polishing pads, batteries, polishing heads, and chargers or already own these components. ShineMate EB210 cordless polisher 3" (75 mm) backing plate No batteries, no charger, no polishing pads No accessories Recommended Accessories: The manufacturer recommends using a 65mm backing plate for 75mm polishing pads in dual-action mode. Alternatively, the optional 74mm backing plate can be used. The ShineMate EB210 is the perfect choice for pros and enthusiasts seeking a powerful, cordless mini polisher with top precision and flexibility.

ShineMate EB212 Polisher Kit – Cordless Orbital Polisher Complete Set The ShineMate EB212 is a compact and powerful cordless orbital polisher with a fixed 12 mm throw. Designed for precise polishing on smaller surfaces, it is perfect for tight spots like door handles, bumpers, or mirror housings. Its cordless design offers maximum freedom and professional performance. This special "Detailing Godfather" Edition features a black lever instead of the usual yellow for a unique look! Why Choose the ShineMate EB212? This high-quality mini polisher combines modern battery technology with an efficient orbital motion to deliver uniform polishing results without holograms. Its compact size is ideal where larger machines are impractical. Top Features of the ShineMate EB212 Wireless Freedom: No cables, ultimate flexibility. Efficient Battery: 10.8V Li-Ion (2.5 Ah) for long runtimes. Consistent Performance: 12 mm throw for smooth polishing. High-speed, Low-vibration Motor: Up to 7000 RPM for precise work. Ergonomic Design: Lightweight and handy for comfortable use. Precise Control: Stepless speed adjustment for versatile tasks. Technical Details of the ShineMate EB212 Power Source: Battery Drive Type: Orbital with free-spinning backing plate Throw: 12 mm Battery: 10.8V Li-Ion, 2.5 Ah Speed Range: 4000 to 7000 RPM (variable) Backing Plate: 3" (75 mm) Weight: Lightweight and compact for precise handling ShineMate EB212 Bare Kit Without Battery The Bare Kit includes just the machine and 75mm backing plate, ideal for users who want to assemble their own set with polishing pads, batteries, and chargers or already own these components. ShineMate EB212 Cordless Polisher 3" (75 mm) Backing Plate No batteries, charger, or polishing pads included Hex Key Included Perfect for Precise Polishing The EB212 cordless orbital polisher excels on small, intricate surfaces. While larger polishers can be bulky, the EB212 offers exact control and a flawless finish. Typical Applications Headlights and tail lights Mirror housings and door handles Bumpers and diffusers Painted interior trims Compact Power Without Compromise The ShineMate EB212 cordless polisher is the perfect tool for detailing and polishing smaller areas. Its 12 mm throw, cordless design, and premium build quality make it indispensable for professional car care. Grab your ShineMate EB212 Kit now for flawless polishing results!

With the EX605, the Asian manufacturer ShineMate produces an interesting 12mm stroke polisher. In this revised version, many new materials and technologies are used. It features a very low-vibration 500W motor, designed for both maximum performance and user-friendliness. The EX605 is the second 12mm stroke polisher with a 125mm backing plate in our range, alongside the Rupes Duetto LHR12E. The EX605 dual-action polisher caters to both enthusiast and commercial pro demands, all at a very attractive price. Smooth Operation and User Comfort for Relaxed Orbital Polishing: ShineMate EX605 The advantage of a 12mm stroke over a 15mm stroke lies in the very high smoothness that these machines offer. The 12mm EX605 also weighs only 2.2kg, thanks to its compact design. The polisher operates at 2,500 to 5,500 orbital rotations per minute. To ensure that prolonged use remains cool, a sophisticated cooling system is implemented. The included cable measures 5m. Perfect Ergonomics for Enjoyable Polishing The housing of the EX620 dual-action polisher is made from high-quality plastic with a rubberized soft grip for a secure hold in the grip and guiding area. All materials are designed for the highest stress resistance. The infinitely variable control lever allows for power adjustment in 6 stages, from spreading polish to polishing and heavy cutting. Operation starts with a switch that enables a soft start. With a locking feature, the operation can be fixed. The backing plate is equipped with an advanced cooling system, while any polishing dust created is blown away. The eccentric weight is made from high-strength metal using CNC technology. EX605 125mm Dual Action Polisher 12mm Stroke Free-running 12mm Dual Action Polisher EX605 with 125mm backing plate 5m cable 125mm backing plate Hex tool for backing plate change Medium Cut Foam Polishing Pad Finishing Foam Polishing Pad German manual Hex tool for backing plate change

The freespinning orbital polisher EX620 from ShineMate marks a new level in their product line, complementing the appreciated processing and material quality of the battery-powered EB351 now in their corded models. This new generation features an optimized 800W motor, designed to deliver maximum performance while ensuring user friendliness. The EX620 polisher caters to both passionate enthusiasts and professional users alike, all at an attractive price. Unmatched Powerful Orbital Polisher with 150mm Backing Pad Powered by a carbon brush motor, this polisher can achieve 3,000 to 5,800 orbital revolutions per minute. With these performance metrics, it can provide a level of cut previously unseen in orbital polishers, increasing rotation speed by 30% and torque by 60% compared to the previous model EX610. To ensure low heat during prolonged use, an advanced cooling system is integrated. The unit weighs 2.6kg with a stroke of 15mm. Perfect Ergonomics for Polishing Joy The EX620's body is constructed from high-quality plastic with a rubberized soft grip for secure handling in the grip and control areas. All materials are built to withstand the highest loads. The stepless control lever allows users to adjust power settings in 6 stages, from distributing polish to polishing and heavy cutting. The start is controlled by a switch that enables smooth operation. A lock button is also provided for sustained operation. The backing pad is equipped with an advanced cooling system, and any generated polishing dust is expelled. The eccentric weight is precision-crafted from high-strength metal using CNC technology. Orbital Polisher EX620 150mm 21mm Stroke Freespinning 21mm orbital polisher EX620 with 150mm backing pad 5m cable 150mm backing pad Hex tool for changing the backing pad Polishing pad Heavy Cut Microfiber Polishing pad Medium Cut Microfiber Polishing pad Finishing Foam Operating manual Hex tool for changing the backing pad Convertible to 125mm backing pad!

Activate notifications and receive an email when available. We expect the arrival of the machine in April 2025! ShineMate Polisher EB212 Kit – Complete Battery Excenter Polisher Set including Polishes & Pads The ShineMate EB212 is a compact and powerful battery excenter polisher with a fixed 12 mm stroke. It is specifically designed for precise polishing on smaller areas and is ideal for hard-to-reach spots like door handles, bumpers, or mirror housings. Thanks to its wireless design, it offers maximum freedom of movement and professional polishing performance. This special "Detailing Godfather" Edition comes with a black lever instead of the usual yellow – for a unique look! Why choose the ShineMate EB212? This high-quality mini polisher combines modern battery technology with an efficient excenter motion, ensuring an even polishing result without holograms. Particularly in areas where larger machines are impractical, the EB212 shows its strengths. Key Benefits of the ShineMate EB212 Cordless Freedom: No annoying cables, maximum flexibility. Efficient Battery Performance: 12V Li-Ion battery (2.5 Ah) for long runtimes. Consistent Power: 12 mm excenter stroke for an even polish. High-speed, low-vibration motor: Up to 7000 RPM for precise polishing tasks. Ergonomic Design: Lightweight and handy for comfortable working. Precise Control: Stepless adjustable speed for various applications. Technical Data of ShineMate EB212 Operating Mode: Battery Drive: Excenter with free-running plate Stroke: 12 mm Battery: 12V Li-Ion, 2.5 Ah Speed: 4000 to 7000 RPM (continuously adjustable) Backing Plate: 3 inches (75 mm) Weight: Lightweight and compact for precise work The Complete Set Accessories The ShineMate EB212 Detailing Godfather Set contains everything you need for professional polishing: ShineMate EB212 Battery Polisher 3" (75 mm) backing plate 12V 2.5 Ah Li-Ion battery Charger 2x 3.5" (90 mm) foam polishing pads Hex key Robust toolbox for storage AETERNO Zenit Pro Cut Compound 1000ml abrasive paste AETERNO Zenit Pro Polish Compound 1000ml high-gloss polish DP Pro Therminator 75mm Intermediate blue polishing pad AUTO GRAPH AVENTURINE paint cleaner Detail Passion 2Face polishing cloth Ideal for precise polishing tasks The EB212 battery excenter polisher is particularly suitable for small and cramped areas. While large polishing machines are often cumbersome, the EB212 allows for exact control and a clean polishing result. Application Areas Headlights and taillights Mirror housings and door handles Bumpers and diffusers Painted interior trim Conclusion – Compact Performance Without Compromises The ShineMate EB212 battery polisher is the perfect choice for detailing work and polishing smaller areas. Its 12 mm excenter stroke, wireless design, and high-quality craftsmanship make it an indispensable tool for professional car care. Secure your ShineMate EB212 Kit now and achieve perfect polishing results!

Activate notifications and receive an email when available. We expect the machine in May 2025!ShineMate Polisher EB212 Kit – Cordless Excenter Polisher Complete SetThe ShineMate EB212 is a compact and powerful cordless excenter polisher with a fixed 12 mm stroke. Specially designed for precise polishing on smaller areas, it is ideal for hard-to-reach spots like door handles, bumpers, or mirror housings. Thanks to its cordless design, it offers maximum freedom of movement and professional polishing performance. This special "Detailing Godfather" Edition comes with a black lever instead of the usual yellow – for a unique look!Why Choose the ShineMate EB212?This high-quality mini polisher combines modern battery technology with an efficient excenter motion that ensures an even polishing result without holograms. The EB212 shines particularly where larger machines are impractical.Key Benefits of the ShineMate EB212Cordless Freedom: No annoying cords, maximum flexibility.Efficient Battery Performance: 12V Li-Ion battery (2.5 Ah) for long runtimes.Consistent Power: 12 mm excenter stroke for an even polish.High-speed, low-vibration motor: Up to 7000 RPM for precise polishing tasks.Ergonomic Design: Lightweight and handy for comfortable operation.Precise Control: Stepless speed adjustment for various applications.Technical Data of the ShineMate EB212Operation Mode: BatteryDrive: Excenter with free-running padStroke: 12 mmBattery: 12V Li-Ion, 2.5 AhSpeed: 4000 to 7000 RPM (infinitely adjustable)Backing Pad: 3 inches (75 mm)Weight: Lightweight and compact for precise workIncluded Accessories in the Complete SetThe ShineMate EB212 Kit includes everything you need for professional polishing:ShineMate EB212 Battery Polisher3" (75 mm) backing pad12V 2.5 Ah Li-Ion batteryCharger2x 3.5" (90 mm) foam polishing padsAllen keySturdy toolbox for storageIdeal for Precise Polishing WorkThe EB212 cordless excenter polisher is particularly suitable for small and angular areas. While large polishers can often be unwieldy, the EB212 allows for precise control and a clean polishing result.Application AreasHeadlights and taillightsMirror housings and door handlesBumpers and diffusersPainted interior trimsConclusion – Compact Power without CompromisesThe ShineMate EB212 cordless polisher is the perfect choice for detailing and polishing smaller areas. Its 12 mm excenter stroke, cordless design, and high-quality finish make it an indispensable tool for professional car care. Secure your ShineMate EB212 Kit now and achieve perfect polishing results!

Getting started is easy! Following this motto, we have assembled a polishing machine set that allows every car enthusiast, regardless of gender, to have a swift and secure entry into the art of polishing. The set includes the ShineMate EX605-05/12 polishing machine, Detail Passion polishing pads, the universal 3D Hybrid One polish, and a microfiber cloth for wiping off polish residues. With this bundle, scratches, weathering, and other paint defects can be effortlessly removed. This is intentionally not a cheap bundle, but a set that will provide years of enjoyment. ShineMate, Detail Passion, and 3D Complete Set with Polishing Machine EX605-05/12 12mm corded eccentric for cutting and high gloss finish 4 high-quality Detail Passion polishing pads - Made in Germany 3D Hybrid One polish 236ml for cutting to finish ShineMate Eccentric Polishing Machine EX605 125mm 12mm Stroke Free-running 12mm eccentric polisher EX605 125mm backing plate 5m cable 125mm backing plate Hex tool for changing the backing plate Medium cut polishing pad foam Finishing polishing pad foam German manual Hex tool for changing the backing plate The Perfect Polish for Professionals and Enthusiasts: 3D One Hybrid For professionals, it is essential that the consumption of a polish is kept as low as possible while allowing for multiple processing steps. 3D One Hybrid can be used with all types of polishing pads - foam pads, microfiber pads, lambswool pads, wool pads. Car care enthusiasts will appreciate that 3D One Hybrid is low-odor and can be processed for an extended time. For simple hand polishing, 3D One Hybrid can even be applied in direct sunlight. 3D One Hybrid is free from fillers and can be completely removed even with gentle degreasers. 3D One Hybrid is ideal as a polish for subsequent sealants using silicon, polymers, or high-quality waxes. DP Pro Therminator Polishing Pads With the DP Pro Therminator polishing pad, the German manufacturer Detail Passion addresses the hype of so-called thermally stable or thermoresistant polishing pads while also realizing its own ideas. The advantages of thermally stable polishing pads are clear. Continuous control of paint or clear coat removal during the polishing process is guaranteed, as the foam does not lose its compression strength due to heat exposure. This means that even at higher speeds, pressure can be maintained, preventing a drop in cutting performance. Similarly, the cell structure is preserved, leading to optimal cooling and minimizing compression. Based on experience with extremely fast heavy cut polishes like the 3D Car Care 510 and the universal 3D One Hybrid, Detail Passion has implemented additional features in the polishing foam. DP Pro Therminator white - Super Heavy Cut for strong paint defects DP Pro Therminator orange - Medium Cut for one step, all in one, or medium strength polishes DP Pro Therminator maroon - Medium Polish for medium polishes and finish DP Pro Therminator black - Gloss finish for sensitive paints or extreme gloss