3D AAT 620 Marine & RV Cutting Compound – Cutting Compound for RVs, Boats, Gelcoat and Aircraft Paint The 3D AAT 620 Marine & RV Cutting Compound is a powerful cutting compound for motorhomes, caravans, boats and yachts. It was developed for the professional restoration of heavily weathered and oxidized surfaces and delivers high cutting performance with efficient processing. Especially on gelcoat, fiberglass and durable painted surfaces, this high-performance compound removes oxidation, scratches, weathering and stubborn surface defects. The 3D AAT 620 can also be used to restore suitable aircraft paint after checking material compatibility and obtaining the appropriate approval. Thanks to its innovative Adaptive Abrasive Technology (AAT), the compound enables fast defect correction and creates the ideal foundation for a high-gloss finish. Highly abrasive cutting compound for motorhomes, caravans, boats and yachts Ideal for gelcoat polishing and fiberglass restoration of heavily weathered surfaces Also suitable for aircraft paint and painted surfaces after prior material testing and approval Removes heavy oxidation, weathering, scratches and dull surface layers High cutting performance for removing sanding marks up to P1000 Adaptive Abrasive Technology (AAT) for efficient and controlled defect correction Free from masking fillers for sustainable surface correction Low dust generation and easy-to-remove polishing residue Can be used with rotary, dual-action and forced-rotation polishers Recommended for use with high-quality polishing pads from Detail Passion or Lake Country Polishing a Motorhome – Professionally Restoring Weathered Fiberglass and Painted Surfaces Regular care and polishing of motorhomes and caravans is essential for maintaining the visual condition of exterior surfaces over the long term. UV radiation, rain, road dirt and weather exposure can cause fiberglass surfaces, gelcoat coatings and paint to become dull, matt or chalky over time. The 3D AAT 620 motorhome polish was developed for intensive correction of this type of surface damage. Its high cutting performance removes oxidized and weathered surface layers and can significantly restore the original color tone. Impressive results can be achieved especially on older motorhomes with heavily faded fiberglass exterior walls or gelcoat coatings. Stubborn signs of use and scratches can also be effectively reduced, depending on the condition of the surface. This makes the 3D AAT 620 ideal for professional motorhome restoration and the restoration of weathered exterior surfaces. The suitability of painted components should be tested beforehand due to the product’s high abrasiveness. Polishing a Boat – Powerful Gelcoat Polish for Boats and Yachts Removing heavy oxidation is often a particular challenge when restoring boats and polishing gelcoat. Salt water, intense sunlight and constant moisture attack the surface and cause dull, chalky and faded areas over time. The 3D AAT 620 Marine Cutting Compound is specifically formulated for intensive treatment of these surfaces. As a powerful boat polish for gelcoat and fiberglass, it removes weathered surface layers, reduces scratches and prepares the surface for subsequent high-gloss polishing. Even pronounced oxidation on boat hulls, superstructures and other gelcoat components can be treated efficiently. Its high cutting performance makes the 3D 620 particularly attractive for professional boat detailers, boatyards and demanding boat owners. In combination with suitable polishing pads, larger gelcoat surfaces can also be restored economically and with consistent results. Polishing Gelcoat – Removing Heavy Oxidation and Scratches Gelcoat is a durable surface coating used particularly on boats, motorhomes and fiberglass components. Despite its robustness, UV radiation, mechanical stress and weather exposure can cause oxidation, loss of gloss and surface weathering. The 3D AAT 620 gelcoat cutting compound provides the cutting performance required to correct these defects in a targeted manner. Thanks to Adaptive Abrasive Technology, even demanding surfaces can be treated efficiently. The compound removes weathered material layers and can eliminate sanding marks up to a grit rating of P1000. It is therefore suitable both for intensive gelcoat restoration and for preparing the surface for subsequent fine and high-gloss polishing. Unlike products that merely enhance gloss, defect correction is achieved through actual material removal. Results depend on the condition of the surface, coating thickness and polishing technique selected. Polishing Aircraft Paint – Restoring Suitable Aviation Paint Surfaces In addition to traditional boat and motorhome restoration, the 3D AAT 620 Cutting Compound may also be suitable for polishing certain aircraft paints. Painted aircraft surfaces are exposed to intense UV radiation, weather and other environmental influences, which can cause oxidation, dull areas and loss of gloss over time. Its high cutting performance generally enables intensive treatment of durable painted surfaces. However, since aircraft paint systems may feature special coating systems and different material thicknesses, use must be checked in advance against the applicable manufacturer and maintenance requirements. Important: The 3D AAT 620 is not an aviation polish approved for all aircraft paints without exception. It may only be used on suitable surfaces and within the applicable approvals. Particular care is required with thin paint layers, special coatings and functional surfaces. Adaptive Abrasive Technology – High Cutting Performance and Efficient Processing The 3D AAT 620 Marine & RV Cutting Compound is based on the advanced Adaptive Abrasive Technology from 3D Products. This specially developed abrasive system enables high material removal and controlled defect correction on suitable surfaces. Efficient processing is particularly important when restoring large areas on motorhomes, boats or yachts. The compound offers high correction performance, comparatively low dust generation and can be wiped off easily after use. Since the formula contains no masking fillers, surface defects are not merely concealed for a short time but are actually reduced or removed during polishing. Rotary, Dual-Action or Forced-Rotation – Flexible Processing with Professional Polishing Pads The 3D AAT 620 cutting compound can be used with different polishing machine systems. Both rotary polishers and free-spinning dual-action polishers as well as forced-rotation dual-action polishers can be used. This allows the treatment to be adapted to the surface condition, desired cutting performance and preferred working method. For optimal results, we recommend combining it with high-quality polishing pads from Detail Passion or Lake Country. Selecting the right polishing pad has a significant influence on cutting performance and the achievable surface finish. Suitable wool and microfiber pads enable intensive defect correction on heavily oxidized gelcoat surfaces. High-quality foam pads are suitable for more controlled treatment and can be used for less severe defects or a finer polishing result. Especially when polishing large motorhome surfaces, boat hulls and fiberglass components, the combination of a powerful cutting compound and professional polishing pads enables efficient and consistent surface restoration. Professional Cutting Compound as the Foundation for a Perfect High-Gloss Finish The 3D AAT 620 Marine & RV Cutting Compound is the ideal first polishing step when intensively restoring heavily weathered gelcoat, fiberglass and suitable painted surfaces. It removes oxidation, reduces scratches and creates the foundation for a high-quality surface finish. For maximum gloss, a suitable high-gloss polish should be used afterward, for example from the 3D Marine & RV product range. This can refine any remaining polishing marks and produce an even, intense gloss. Applying a subsequent sealant helps protect the restored surface against renewed environmental exposure. Whether polishing a motorhome, polishing a boat, restoring gelcoat or professionally treating suitable aircraft paint – the 3D AAT 620 offers a powerful solution for demanding polishing work and intensive correction of heavily stressed surfaces.

3D AAT 630 Marine & RV Finishing Polish – High-Gloss Polish for RVs, Boats, Gelcoat and Aircraft Paint The 3D AAT 630 Marine & RV Finishing Polish is a high-quality high-gloss polish for motorhomes, caravans, boats and yachts, specially developed to refine and optimize the gloss of demanding surfaces. It is ideally suited for the professional detailing of gelcoat, fiberglass and suitable painted surfaces, creating an even, premium high-gloss finish. Light polishing marks, fine scratches, holograms and superficial gloss defects can be specifically reduced. It may also be used for detailing suitable aircraft paint following appropriate material testing and approval. The modern Adaptive Abrasive Technology (AAT) supports precise surface refinement, making the 3D AAT 630 the ideal follow-up to an intensive cutting polish such as the 3D AAT 620 Marine & RV Cutting Compound. Premium high-gloss polish for motorhomes, caravans, boats and yachts Ideal for gelcoat polishing and fiberglass detailing to create a brilliant surface finish Also suitable for approved aircraft paint and durable painted surfaces following appropriate authorization Reduces fine scratches, holograms, polishing haze and light surface defects Creates intense depth of gloss and an even surface appearance Adaptive Abrasive Technology (AAT) for precise and controlled surface refinement Ideal as the second polishing step after the 3D AAT 620 Cutting Compound Suitable for use with rotary, dual-action and forced-rotation polishers Recommended for use with high-quality polishing pads from Detail Passion or Lake Country Ideal for professional boat detailing, motorhome care and gelcoat restoration Polishing Motorhomes – High Gloss for Fiberglass and Painted Surfaces In professional motorhome detailing, the final surface finish is particularly important in addition to removing oxidation and scratches. The 3D AAT 630 motorhome polish was developed to refine suitable fiberglass, gelcoat and painted surfaces and create an intense, even gloss. UV radiation, weather and regular cleaning can cause motorhomes and caravans to lose their gloss over time. Intensive defect correction can also leave fine polishing marks or light haze that detracts from the overall appearance. The 3D AAT 630 reduces these fine surface defects and improves optical clarity. Especially on the large, smooth exterior surfaces of motorhomes, the high-gloss polish creates a well-maintained appearance and a premium surface finish. It is suitable both as a final polish after a more aggressive cutting polish and as a standalone gloss refresher for surfaces that are already in good condition. Polishing Boats – High-Gloss Polish for Boats and Yachts The 3D AAT 630 Marine & RV Finishing Polish is ideally suited for final boat polishing and yacht detailing. Gelcoat surfaces on boats are constantly exposed to UV radiation, moisture, salt water and mechanical stress. This can lead to loss of gloss, fine scratches and light surface weathering. As a high-quality boat polish for gelcoat and fiberglass, the 3D AAT 630 supports the restoration of a smooth, glossy surface and creates an especially even finish. After heavily oxidized areas have been treated with a cutting polish such as the 3D AAT 620, any remaining polishing marks can be refined specifically. The result is a visually clearer surface with intense gloss. The Finishing Polish is a premium solution for professional detailers, boatyards and demanding boat owners, especially on large hulls, superstructures and visible gelcoat surfaces. Polishing Gelcoat – Removing Fine Scratches and Polishing Marks The 3D AAT 630 gelcoat high-gloss polish is designed for fine surface correction and gloss optimization on gelcoat coatings. Gelcoat is commonly used on boats, motorhomes, caravans and other fiberglass components and can lose gloss due to aging, UV radiation or mechanical stress. While highly abrasive cutting polishes remove heavy oxidation and deeper defects, the 3D AAT 630 focuses on refining the polishing pattern and creating a brilliant high-gloss finish. Fine sanding marks, light holograms and superficial scratches can be reduced depending on the material condition. A careful finishing polish can significantly improve color depth and reflection, especially on dark or colored gelcoat surfaces. This makes the 3D AAT 630 suitable both for final gelcoat restoration and for regularly refreshing the gloss of well-maintained surfaces. Polishing Aircraft Paint – High-Gloss Finish for Suitable Aviation Paint Surfaces Fine high-gloss polishing can also help improve the appearance of suitable aircraft paint during professional detailing. Aircraft coatings are exposed to particular stresses from UV radiation, weather and various environmental influences. The 3D AAT 630 Finishing Polish can generally be used to reduce fine polishing marks and light visual defects on suitable painted surfaces and improve gloss. However, aircraft may feature specialized paint and coating systems, so use must be expressly permitted according to the applicable manufacturer and maintenance specifications. Important: The 3D AAT 630 is not an aviation polish approved for all aircraft paint systems as a matter of course. Functional coatings, special paint systems and sensitive surfaces may only be treated within the scope of the appropriate approvals. Adaptive Abrasive Technology – Precise Surface Refinement and Intense Depth of Gloss The 3D AAT 630 Marine & RV Finishing Polish uses the modern Adaptive Abrasive Technology from 3D Products. The finely tuned abrasive system is designed for controlled surface refinement and the creation of a high-quality gloss appearance. Unlike highly abrasive cutting polishes, this high-gloss polish focuses not on maximum material removal, but on the finest possible correction of light surface defects. This allows holograms, light polishing haze and fine signs of use to be treated while achieving a high level of optical clarity. Especially on large gelcoat and fiberglass surfaces of boats and motorhomes, the 3D AAT 630 provides an efficient way to visibly improve the surface finish after intensive defect correction. Rotary, Dual-Action or Forced-Rotation – High-Gloss Polishing with Professional Pads The 3D AAT 630 high-gloss polish can be used with various polishing machine systems. Both rotary polishers and free-spinning dual-action polishers as well as forced-rotation polishers enable targeted surface refinement. For optimal results, we recommend combining it with high-quality polishing pads from Detail Passion or Lake Country. Particularly soft and medium-soft foam pads are suitable for creating a fine, low-hologram high-gloss finish. The pad selection can be adjusted depending on the surface condition and the desired level of correction. The combination of a high-quality finishing polish, a suitable polishing machine and professional pads enables even treatment of larger areas. This makes the 3D AAT 630 ideal for final polishing of motorhomes, boats, yachts and fiberglass components. Perfect High-Gloss Finish After the 3D AAT 620 Cutting Compound The 3D AAT 630 Marine & RV Finishing Polish is the ideal complement to the highly abrasive 3D AAT 620 Marine & RV Cutting Compound. While the 3D AAT 620 corrects heavy oxidation, deeper scratches and pronounced surface defects, the 3D AAT 630 performs the subsequent fine polishing and gloss optimization. This combination enables professional multi-stage detailing of heavily stressed gelcoat, fiberglass and suitable painted surfaces. Used as a standalone high-gloss polish on surfaces that are already in good condition, the 3D AAT 630 also provides an excellent way to refresh the gloss. After polishing, a suitable surface protection is recommended to protect the achieved finish from renewed environmental influences. Whether polishing a motorhome, polishing a boat, bringing gelcoat to a high gloss or refining suitable aircraft paint – the 3D AAT 630 offers a high-quality solution for demanding finishing work and professional surface care.

3D AAT 640 Marine & RV All-In-One – One-Step Polish for Motorhomes, Boats, Gelcoat and Aircraft Paint The 3D AAT 640 Marine & RV All-In-One Compound & Polish is a powerful one-step polish for motorhomes, caravans, boats and yachts that combines cutting power and a high-gloss finish in a single product. Specially developed for the professional detailing of gelcoat and fiberglass surfaces, the polish removes oxidation, fine scratches, weathering and surface defects while simultaneously producing an intense deep gloss. Thanks to innovative Adaptive Abrasive Technology (AAT), the 3D AAT 640 enables efficient defect correction without the mandatory use of several different polishes. The cutting power can be specifically adjusted by selecting the right polishing pad – from intensive cutting to a premium high-gloss finish. It may also be suitable for use on certain aircraft paint after appropriate material testing and approval. One-step polish combining cutting power and a high-gloss finish in one product Ideal for motorhomes, caravans, boats, yachts and gelcoat surfaces Suitable for professional fiberglass detailing and gelcoat polishing Removes oxidation, weathering, fine scratches and surface defects Can remove sanding marks up to P2000 Adaptive Abrasive Technology (AAT) for efficient defect correction and high gloss Without concealing fillers – actual defect correction instead of short-term masking Low dust generation and easy-to-remove polishing residue Cutting power and finish can be influenced by selecting the polishing pad Can be used with rotary, dual-action and forced-rotation polishers Recommended combination with high-quality polishing pads from Detail Passion or Lake Country Also of interest for suitable aircraft paint after appropriate approval Polishing a Motorhome – Cutting and High Gloss in One Step Professional motorhome detailing often presents a particular challenge due to large surfaces, weathered fiberglass components and oxidized gelcoat coatings. Intense UV radiation, weather exposure and regular cleaning cause motorhomes and caravans to lose their original gloss over time. The 3D AAT 640 motorhome polish combines the correction of light to moderate surface defects with a high-quality high-gloss finish. This allows many detailing tasks to be completed with just one polish. Particularly on large fiberglass exterior walls and gelcoat coatings, the one-step polish offers an efficient way to refresh dull surfaces, remove oxidation and visibly improve color depth. The process can be adapted to the condition of the respective surface by combining it with different polishing pads. The 3D AAT 640 is therefore suitable both for regular motorhome care and for the professional detailing of older motorhomes and caravans. Polishing a Boat – One-Step Boat Polish for Gelcoat and Fiberglass The 3D AAT 640 Marine & RV All-In-One was specially developed for the requirements of boat detailing and gelcoat polishing. Boats and yachts are constantly exposed to intense sunlight, salt water, moisture and mechanical stress. These influences can cause oxidation, loss of gloss, fine scratches and weathered surfaces. As a powerful boat polish for gelcoat and fiberglass, the 3D AAT 640 enables effective surface correction while producing a high-quality high-gloss finish. Especially when working on larger hulls and superstructures, combining a cutting polish and finishing polish in one product offers a significant efficiency advantage. A suitable wool pad can provide greater cutting power, while high-quality foam pads enable finer surface refinement with intense gloss. This makes the 3D AAT 640 an excellent choice for professional boat detailers, boatyards and discerning boat owners. Polishing Gelcoat – Removing Oxidation and Creating a High Gloss The 3D AAT 640 gelcoat polish combines defect correction and surface refinement in a versatile polish. Gelcoat coatings are used particularly on boats, motorhomes, caravans and fiberglass components. UV radiation, aging and mechanical stress can cause these surfaces to become dull, flat or chalky. Modern Adaptive Abrasive Technology allows oxidation, light scratches and surface defects to be specifically reduced. The polish can remove sanding marks up to a grit of P2000 while producing a glossy surface finish. The ability to influence the cutting power by selecting the polishing pad is particularly advantageous. This means the 3D AAT 640 can be used both for more intensive gelcoat correction and for final gloss enhancement. Since the formula works without concealing fillers, defects are corrected through actual material removal rather than merely being covered up optically for a short time. Polishing Aircraft Paint – One-Step Polish for Suitable Aviation Paint Surfaces A combination of defect correction and high-gloss polishing may also be of interest when professionally detailing suitable aircraft paint. Painted aircraft surfaces are exposed to particular stresses from UV radiation, weather and environmental influences, which can lead to light oxidation, fine scratches and loss of gloss. The 3D AAT 640 All-In-One polish can generally be used for controlled treatment of suitable, durable painted surfaces and may reduce light defects while improving surface gloss. Due to the different paint and coating systems used in aviation, its use must be checked in advance against the respective manufacturer and maintenance specifications. Important: The 3D AAT 640 does not have blanket approval for all aircraft paint finishes. It may only be used on suitable surfaces that have been appropriately approved. Functional specialty coatings and sensitive paint layers require particular caution. Adaptive Abrasive Technology – Cutting Power and High Gloss with One Polish The 3D AAT 640 Marine & RV All-In-One Compound & Polish is based on the advanced Adaptive Abrasive Technology from 3D Products. The specially developed abrasive system combines effective defect correction with the ability to achieve a high-quality high-gloss finish. Unlike classic multi-stage polishing systems, the 3D AAT 640 can cover different processing steps with just one product. This offers a considerable time advantage, particularly when detailing large areas on motorhomes, boats and yachts. The polish is characterized by low dust generation and easy removal of polishing residue. Its filler-free formula enables actual surface correction, while the finely tuned abrasive system provides high-quality gloss development. Depending on the condition of the surface and the polishing pad selected, both correction performance and the achievable finish can be influenced. Rotary, Dual-Action or Forced-Rotation – Flexible Application with Professional Polishing Pads The 3D AAT 640 one-step polish can be used with different polishing machine systems. Both rotary polishers and free-spinning dual-action polishers and forced-rotation dual-action polishers enable effective surface treatment. For optimum results, we recommend combining it with high-quality polishing pads from Detail Passion or Lake Country. Pad selection is particularly important with a one-step polish, as it allows the cutting power and finish to be precisely controlled. Suitable wool and microfiber pads offer higher correction performance on oxidized gelcoat surfaces, while high-quality foam pads enable controlled defect correction and a finer high-gloss finish. By changing the polishing pad, the 3D AAT 640 can be used both for more intensive correction work and for final surface refinement. This flexible system offers an economical and efficient solution, particularly when polishing large motorhome surfaces, boat hulls and fiberglass components. One-Step Polish or Multi-Stage Detailing – The Right Choice for Every Surface The 3D AAT 640 Marine & RV All-In-One is particularly interesting when oxidation, light to moderate scratches and loss of gloss need to be corrected with minimal effort. As a one-step polish for motorhomes, boats and gelcoat, it combines cutting power and a high-gloss finish, reducing the need for several different polishing products. On particularly heavily weathered surfaces or deep defects, however, a multi-stage process using the 3D AAT 620 Marine & RV Cutting Compound followed by the 3D AAT 630 Marine & RV Finishing Polish may be advisable. For regular professional care and efficient detailing of gelcoat and fiberglass surfaces, the 3D AAT 640 offers a versatile alternative. Whether polishing a motorhome, polishing a boat, restoring gelcoat or refining suitable aircraft paint – the 3D AAT 640 combines effective surface correction and intense high gloss in one product.

Detail Passion Blue Low Lint Wool – Merino lambskin polishing pad for maximum cut and a fine finishThe Detail Passion Blue Low Lint Wool polishing pad Ø 130 mm combines the exceptionally high cutting performance of premium Merino lambswool with a surprisingly fine polishing finish. The blue-dyed lambskin polishing pad was developed for demanding paint correction work where pronounced scratches, heavy signs of wear and sanding marks need to be removed as quickly and effectively as possible. The special low-lint design reduces lint formation during polishing. A firmly attached, rubberized interface on a foam carrier ensures maximum control and precise guidance across the paint surface. The Detail Passion Blue Low Lint Wool performs particularly well during rotary polishing, but is also suitable for free-spinning dual-action polishers. Manufactured in Europe, this premium lambskin pad combines high correction performance, low heat generation and professional workmanship.Maximum cut with a fine finish: High cutting performance for quickly removing pronounced paint defects while delivering a notably clean polishing result.Premium Merino lambswool: Blue-dyed natural wool with excellent properties for intensive paint correction.Low-lint properties: Reduced lint formation for clean and comfortable working.Rubberized interface: Firmly attached connection on a foam carrier for controlled polishing and stable power transfer.Ideal for rotary polishers: Particularly high efficiency during demanding correction work.Also suitable for free-spinning dual-action polishers: Versatile use with different polishing machines.Low heat generation: Supports effective defect correction at a comparatively low working temperature.Fast removal of scratches and sanding marks: Ideal for heavy swirls, deeper polishable scratches and sanding marks.Made in Europe: High-quality European manufacturing for professional requirements.Dimensions: Designed for 125 mm backing plates, with a polishing pad diameter of 130 mm.Maximum paint correction with premium Merino lambswoolMerino lambskin is one of the most powerful materials for abrasive paint polishing. In combination with a suitable cutting compound, the natural wool fibers create intensive mechanical action on the paint surface. This often makes it possible to correct even stubborn paint defects considerably faster than with many conventional foam polishing pads. The Detail Passion Blue Low Lint Wool uses these properties for particularly efficient defect removal.Typical applications include pronounced wash marks, heavy swirls, weathered paint surfaces and sanding marks following painting or repair work. Depending on their depth and the available clear coat thickness, deeper scratches can also be reduced or removed. Scratches that have already penetrated through the clear coat, however, cannot be removed by polishing.A key advantage of the Blue Low Lint Wool is the combination of high cutting performance and a comparatively fine finish. Despite its intensive material removal, the special Merino wool can produce an even polishing pattern. Depending on paint hardness, the compound used and machine handling, this can reduce the amount of subsequent finishing required.Rubberized interface and foam carrier for maximum controlControlled power transfer is particularly important with high-performance lambskin polishing pads. The Detail Passion Blue Low Lint Wool features a foam carrier with a firmly attached, rubberized interface. This construction supports a stable connection between the polishing machine and wool pad and improves control during demanding correction work.The foam carrier provides a degree of adaptability to the contours of the surface, while the rubberized interface contributes to the stability of the overall pad construction. This allows the polishing pad to be guided precisely even during intensive work. Especially during rotary polishing, this construction supports even power transfer and a controlled working feel.Ideal for rotary polishing and free-spinning dual-action polishersThe Detail Passion Blue Low Lint Wool delivers particularly high correction performance on rotary polishers. The direct rotary movement and the abrasive properties of the Merino wool enable efficient treatment of heavy paint defects and sanding marks. This makes the pad especially suitable for professional paint correction work where high material removal is required in the shortest possible time.The lambskin pad can also be used on free-spinning dual-action polishers. The combination of rotary and eccentric movement enables versatile use, although the actual correction performance depends on the machine throw, compound, paint hardness and working method.Another advantage of high-quality lambskin polishing pads is their comparatively low heat generation. The open fiber structure can reduce heat buildup in the contact area and thereby support effective paint correction. This is an important advantage, especially during longer polishing sessions and intensive defect removal, compared with many closed-cell or very compact polishing materials. Nevertheless, the temperature of the paint surface should always be monitored.Low lint – less lint formation during intensive polishing workConventional lambskin pads can release loose wool fibers during use, which may spread across paint surfaces, plastic parts and adjacent components. The Detail Passion Blue Low Lint Wool is designed to reduce lint formation and thereby supports a clean workflow.The blue-dyed Merino lambswool combines the natural polishing properties of high-quality wool fibers with processing designed for professional applications. The low lint formation is a practical advantage, particularly during longer polishing sessions and large-area paint correction work.Recommended compounds – 3D ACA X-TRA 500 and 3D One Hybrid 400The Detail Passion Blue Low Lint Wool can be combined excellently with high-performance paint compounds. Particularly recommended are the 3D ACA X-TRA 500 Cutting Compound for maximum defect correction and the 3D One Hybrid 400 for a balanced combination of high cutting performance and a fine finish. Both compounds are suitable for use with lambskin polishing pads and enable different levels of correction.3D ACA X-TRA 500 Cutting Compound: Highly abrasive cutting compound for quickly removing heavy scratches, pronounced paint defects and sanding marks. Ideal when maximum cutting performance is the priority.3D One Hybrid 400: Versatile hybrid compound for effective defect correction combined with a fine polishing result. Particularly interesting for one-step polishing and for combining high cut with as little follow-up work as possible.The combination of premium Merino lambswool and modern compound technology enables efficient paint correction. Depending on paint hardness and the type of defect, the Blue Low Lint Wool can be used for both intensive cutting work and demanding one-step polishing.Detail Passion Blue Low Lint Wool – maximum performance for professional paint correctionWith the Detail Passion Blue Low Lint Wool Ø 130 mm, you get a high-performance Merino lambskin polishing pad that combines maximum defect correction with a notably fine finish. The premium blue Merino wool, reduced lint formation and controlled construction with a rubberized interface make it an excellent choice for demanding polishing work.Whether used on a rotary polisher or a free-spinning dual-action polisher, this European-made lambskin pad impresses with high cut, efficient operation and versatile applications. For professional vehicle detailers, painters and ambitious detailing enthusiasts, the Detail Passion Blue Low Lint Wool is a high-performance solution for quickly removing pronounced paint defects.

Detail Passion Glass Defect Removal – Special Polishing Pad for Professional Glass Polishing The Detail Passion Glass Defect Removal polishing pad was specially developed for machine polishing of glass and the effective removal of fine scratches, wiper marks and superficial defects on vehicle glass. In combination with powerful cerium oxide-based glass polishes, this special pad enables targeted and even treatment of glass surfaces. Especially when used with rotary polishers, the glass polishing pad impresses with reliable power transmission and a particularly secure hook-and-loop velour fastener. Available in diameters of 75 mm and 125 mm, it is suitable for both spot defect correction and treating larger glass areas. Special polishing pad for glass: Developed for machine polishing of glass and removing superficial glass defects. Optimized for cerium oxide glass polishes: Ideal for glass polishes such as 3D Glass Polish 521 and SONAX PROFILINE GlassPolish. Ideal for rotary polishers: Supports even and effective treatment of glass surfaces. Particularly secure velour hook-and-loop fastener: Ensures a stable connection to the backing plate, even at high speeds. Two practical sizes: Available with either a 75 mm or 125 mm diameter. Targeted defect correction: Supports the removal of fine scratches, wiper marks and polishable surface defects. Professional glass preparation: For treating suitable windshields, side windows and rear windows. Polish glass and remove scratches – with cerium oxide and the right polishing pad Vehicle glass is significantly harder and more resistant than conventional automotive paint. Therefore, scratches and signs of use on glass cannot be removed with ordinary paint polishes. Effective glass preparation requires special glass polishes formulated for the properties of mineral glass surfaces. Together with a suitable cerium oxide polish, the Detail Passion Glass Defect Removal polishing pad forms the basis for effective machine polishing of glass. Typical applications include fine scratches caused by windshield wipers, superficial signs of use, light dull spots and certain chemically induced surface damage. Especially on windshields, worn wiper blades, dirt particles and mechanical stress can leave fine marks over time that become clearly visible in direct sunlight or when facing oncoming headlights. Depending on their depth and characteristics, such defects can actually be reduced or removed by combining a suitable glass polish with this specially designed polishing pad. Unlike purely cleaning glass products, abrasive glass polishing involves targeted treatment of the glass surface. How does glass polishing with cerium oxide work? Cerium oxide, also known as ceria or cerium(IV) oxide, is a proven polishing agent for mineral glass. It is used in professional glass processing, among other applications, because it offers a special combination of mechanical abrasiveness and chemically assisted polishing action. High-quality cerium oxide-based glass polishes enable controlled treatment of the glass surface and can effectively reduce fine scratches and superficial defects. During polishing, the fine cerium oxide particles act on the glass surface together with the polishing pad and mechanical movement. In addition to mechanical treatment, chemical interactions between the cerium oxide and the silicate glass surface can support material removal. This controlled removal of the top glass layer gradually smooths the surface. When removing a scratch, it is not filled in. Instead, the surrounding glass surface is treated until the difference in height between the scratch and the adjacent area is reduced. This can make fine scratches disappear visually or become significantly less noticeable. The success of glass polishing depends in particular on the depth of the defect, the type of glass, the polish used, the polishing pad and the technique applied. Deep scratches, stone chips and cracks cannot be reliably eliminated through conventional glass polishing. Rotary glass polishing – optimum power transmission and controlled temperature Treating glass requires a suitable combination of polishing compound, polishing pad and machine movement. The Detail Passion Glass Defect Removal is especially designed for use with rotary polishers. The continuous rotary movement enables even mechanical treatment and supports the action of abrasive cerium oxide glass polishes. A key quality feature is the particularly secure velour hook-and-loop fastener. It ensures a stable connection between the polishing pad and backing plate and supports reliable retention even at higher rotational speeds. Secure attachment is crucial for controlled pad guidance, especially during demanding glass polishing work. Controlling heat generation is particularly important when polishing glass. Friction between the polishing pad, cerium oxide polish and glass surface generates heat during the polishing process. To avoid excessive heating, it is recommended to lightly moisten the work area with a small amount of distilled water as needed during treatment, provided the glass polish being used permits this. The water supports cooling, keeps the polish workable and reduces the risk of the polish residue drying prematurely. Distilled water is particularly suitable because it leaves no significant mineral residue. The glass surface must not overheat during treatment. Controlled speed, even movements and regular temperature checks are essential for safe glass polishing. Excessive heat generation can promote stress in the glass and, in the worst case, cause damage. 75 mm or 125 mm – the right glass polishing pad for every work area The Detail Passion Glass Defect Removal polishing pad is available in two diameters, allowing flexible adaptation to different glass surfaces and defect areas. The 75 mm version is particularly suitable for smaller glass areas and the targeted treatment of localized scratches or wiper marks. Its compact diameter allows limited work areas to be treated precisely. The 125 mm version is suitable for larger glass surfaces and enables efficient treatment of extensive areas. Especially when preparing larger window surfaces, the larger diameter can reduce working time and support even treatment. Application – how to properly polish vehicle glass with cerium oxide glass polish For successful glass polishing, the glass surface and polishing pad should be carefully prepared. Since friction and heat are generated when treating glass, a controlled working method is particularly important. The Detail Passion Glass Defect Removal polishing pad should be used with suitable glass polishes and in accordance with the respective manufacturer's instructions. Clean the glass thoroughly: Remove dirt, dust, mineral deposits and other contaminants from the glass. Prepare the work area: Protect adjacent paintwork, seals and sensitive components from polish splashes. Attach the polishing pad: Mount the Detail Passion Glass Defect Removal centrally and securely on a suitable backing plate. Apply glass polish: Apply a suitable amount of cerium oxide glass polish to the pad or glass surface. Polish in a controlled manner: Work with a suitable rotary polisher, adapted pressure and even, overlapping movements. Cool with distilled water: Lightly spray the glass surface with distilled water as needed, provided this is compatible with the polish being used. This limits heat generation and reduces premature drying of the polish. Check the temperature regularly: Avoid excessive heat and polishing in one spot for too long. If the surface becomes very hot, stop treatment and allow the glass to cool evenly. Check the result: Remove polish residue, clean the glass surface and inspect the result under suitable lighting. Important application note: Glass polishing should not be carried out on hot glass or in direct sunlight. Controlled moistening with distilled water supports temperature control but does not replace an appropriate polishing technique. Especially when treating windshields, ensure that excessive or uneven material removal does not cause optical distortion. Deep scratches, damaged windows and coated or specially treated glass surfaces require separate assessment. Detail Passion Glass Defect Removal – specialist for professional glass preparation Whether bothersome wiper marks, fine scratches or superficial glass defects: the Detail Passion Glass Defect Removal polishing pad is a specialized tool for professional glass preparation. Its compatibility with cerium oxide glass polishes, suitability for rotary polishing and particularly reliable velour hook-and-loop fastener make this pad a well-designed choice for demanding glass polishing work. In combination with a high-quality cerium oxide glass polish and controlled processing using distilled water, the glass surface can be treated in a targeted manner. With the two available sizes of 75 mm and 125 mm, Detail Passion offers the right glass polishing pad for different work areas.

```html FLEX Battery Set 18-55 CA2 – full power for 18 V cordless tools The FLEX Battery Set 18-55 CA2 provides a powerful energy supply for compatible FLEX cordless tools. This practical power set combines two 18 V batteries with 5.0 Ah each with a suitable 12/18 V fast charger. This provides sufficient energy for demanding work in the workshop, garage or on the go. Complete power set for FLEX cordless tools 2 x FLEX battery packs with 18.0 V and 5.0 Ah 1 x FLEX fast charger for 12.0 and 18.0 V batteries High battery capacity for extended operation Ideal for expanding existing FLEX cordless tools Two 5.0 Ah batteries for extended operation The two included 18 V battery packs with 5.0 Ah each offer a powerful combination of performance and capacity. While one battery is being used in the tool, the second battery can be kept ready or charged. This helps reduce interruptions and enables longer jobs to be completed efficiently. Fast charger for 12 and 18 volts The set includes a FLEX fast charger for 12.0 and 18.0 V batteries. In addition to the included 18 V batteries, it can also charge compatible FLEX batteries in the 12 V class. Practical addition to the FLEX cordless system Whether for a polisher, grinder or another compatible FLEX cordless tool: two additional batteries and a fast charger provide a practical way to expand the mobile power supply. The FLEX P-Set 18-55 CA2 is suitable both for building a new cordless tool setup and as an addition to existing FLEX equipment. Scope of delivery The FLEX power set is supplied as a complete unit and contains the appropriate equipment for a reliable additional power supply for compatible FLEX cordless tools. 2 x FLEX battery pack 18.0 V / 5.0 Ah 1 x FLEX fast charger 12.0 / 18.0 V Product information The FLEX P-Set 18-55 CA2 is a practical solution for professional and demanding applications where a reliable battery supply and minimal work interruptions are required. Manufacturer: FLEX Model: P-Set 18-55 CA2 Order number: 535895 EAN: 4030293297357 Battery voltage: 18.0 V Battery capacity: 5.0 Ah per battery Number of batteries: 2 Charger: 12.0 / 18.0 V fast charger Packaging unit: 1 piece ```

FLEX XFE 2 21 18-EC C – Cordless Random Orbital Polisher with 21 mm OrbitThe FLEX XFE 2 21 18-EC C is a powerful 18 V cordless random orbital polisher for demanding paint correction and professional vehicle detailing. With its particularly large 21 mm polishing orbit, it enables fast work progress and shows its strengths especially on larger vehicle surfaces. It combines high correction performance with the safe and controlled polishing behavior of a free-spinning random orbital polisher – completely cordless.21 mm polishing orbit for high material removal and fast work progressFree-spinning random orbital movement for controlled polishing18 V battery operation for maximum freedom of movementHigh performance throughout the entire battery runtimeBrushless motor with high efficiency and performanceCDC constant electronics to prevent unwanted speed fluctuationsIdeal for everything from defect correction to high-gloss finishingErgonomic soft-grip areas and an especially flat gear head21 mm orbit for significantly faster work progressThe centerpiece of the FLEX XFE 2 21 18-EC C is its large 21 mm random orbital orbit. Compared with a conventional 15 mm random orbital polisher, the polishing pad moves along a significantly larger oscillation circle. This allows faster work, particularly on large surfaces, and enables high paint removal when the appropriate pad and polish combination is used.This makes the XFE 2 21 particularly suitable for bonnets, vehicle roofs, doors and other large body areas. Depending on the polishing pad and polish used, the application range extends from removing heavier paint defects and deeper scratches to achieving a high-gloss finish.125 mm or 150 mm – especially flexible backing plate optionsA major advantage for vehicle detailing is the flexibility when choosing the backing plate. The FLEX XFE 2 21 18-EC C is designed for a maximum backing plate size of 150 mm and can also be used with a 125 mm backing plate. This allows the powerful 21 mm orbit to be combined with the particularly common 125 mm plate format.The 150 mm backing plate prioritizes maximum surface coverage. The 125 mm backing plate, on the other hand, makes the machine more versatile and allows the use of more compact polishing pads. This combination is particularly interesting for professional detailers: 21 mm orbit for fast paint removal combined with the handy and universal pad size of a 125 mm backing plate.As powerful as a corded polisher – just without the cordFLEX has designed the XFE 2 21 18-EC C to deliver its high performance throughout the entire battery runtime. The integrated CDC constant electronics prevent disruptive speed fluctuations and ensure consistent operation. This allows the machine to be guided over the paint in a controlled manner even during longer polishing sessions.Trigger switch for slow and sensitive start-upLock-on function for convenient continuous operationSpeed selector wheel accessible from both sides, with detentsSoft start for a controlled start of workRestart protectionTemperature monitoring and overload protectionElectronic Management System (EMS)LED indicator for battery capacityNew brushless motor and high-performance gearboxThe machine features a new generation of brushless FLEX motors with high efficiency and performance. The motor is complemented by a newly developed high-performance gearbox designed to minimize noise and vibration. This is particularly noticeable during longer polishing jobs and supports precise machine control.An integrated magnetic solution additionally stabilizes the backing plate rotation and prevents the polishing plate from continuing to run unnecessarily for too long. As a result, the machine remains controlled when being set down and repositioned and can be used comfortably in professional everyday work.Guide the machine ergonomically and with control over the paintThe XFE 2 21 was also adapted to the requirements of professional vehicle detailing in terms of handling. Ergonomically shaped soft-grip areas enable secure guidance, while the extremely flat gear head reduces the distance between the hand and the paint surface. This allows the machine to be guided in a controlled manner in different working positions.A rubberized resting surface also allows the polishing machine to be placed down securely during work – a small but extremely practical detail in everyday use.FLEX 18 V battery systemThe FLEX XFE 2 21 18-EC C is part of the FLEX 18 V battery system and can be operated with all compatible FLEX 18 V battery packs. If you already own other FLEX 18 V machines, you can also use existing batteries for the polishing machine. The XFE 2 21 18-EC C version is supplied without a battery and without a charger.Technical data FLEX XFE 2 21 18-EC CWith a 21 mm orbit, a wide adjustable speed range and a powerful 18 V drive, the FLEX XFE 2 21 18-EC C provides the technical prerequisites for efficient paint correction from cutting to finishing.Battery voltage: 18 VPolishing principle: Free-spinning random orbitalPolishing orbit: 21 mmMax. backing plate size: 150 mmNo-load speed: 1,350–4,350 rpmNo-load orbit rate: 2,700–8,700 orbits/minDimensions L x W x H: 388 x 125 x 126 mmWeight without battery pack: 2.4 kgMotor: brushlessOrder number: 534999EAN: 4030293288393Scope of deliveryThe version with order number 534999 is the solo version of the cordless polishing machine. It is therefore particularly suitable for users who already own batteries and chargers from the FLEX 18 V system.1x FLEX XFE 2 21 18-EC C cordless random orbital polisher1x special damped hook-and-loop backing plateSupplied without batterySupplied without chargerIdeal for professional paint correction and vehicle detailingThe FLEX XFE 2 21 18-EC C is particularly appealing to vehicle detailers and demanding enthusiasts looking for a powerful random orbital polisher with a large orbit. The combination of 21 mm orbit, powerful 18 V drive and cordless freedom of movement enables fast work progress without sacrificing the advantages of a free-spinning random orbital polisher.The machine is particularly interesting for users who have previously worked with a 15 mm random orbital polisher and want greater work progress and correction performance on larger surfaces. Thanks to the additional option of using a 125 mm backing plate, the XFE 2 21 remains remarkably versatile. It is therefore a strong choice for efficient cutting, one-step polishing and demanding finishing work.

FLEX XFE 2 21 18-EC Set – Cordless Random Orbital Polisher with 21 mm Orbit The FLEX XFE 2 21 18-EC Set is the powerful complete solution for professional vehicle detailing and demanding paint correction. The free-spinning cordless random orbital polisher combines an exceptionally large 21 mm polishing orbit with a powerful 18 V battery drive, enabling rapid work progress – especially on large painted surfaces. The set already includes 2 FLEX 18 V batteries and a fast charger, making the machine ready for immediate use. 21 mm polishing orbit for high material removal and rapid work progress Complete set with 2 batteries and fast charger Powerful 18 V battery drive without a disruptive cable Free-spinning random orbital motion for controlled paint correction Maximum backing pad size of 150 mm Ideal for large vehicle surfaces and efficient defect correction Brushless motor with high efficiency and performance Suitable for everything from stronger cutting to a high-gloss finish 21 mm orbit – more material removal and faster work progress The particularly large 21 mm random orbital stroke is one of the key advantages of the FLEX XFE 2 21 18-EC. Compared with a typical 15 mm random orbital polisher, the polishing pad describes a larger oscillation circle. This allows efficient work, particularly on large surfaces, and a high degree of correction when the pad and polish are suitably combined. Hoods, roofs, doors and larger side panels can be processed particularly efficiently with the 21 mm orbit. FLEX has designed the machine for a wide range of applications – from removing deeper scratches to finishing. The XFE 2 21 is therefore suitable for intensive paint correction as well as one-step applications and multi-stage polishing processes. Ideal for 125 mm and 150 mm backing pads The flexibility of the backing pad is particularly interesting for professional vehicle detailers. The XFE 2 21 is designed for a maximum backing pad size of 150 mm, but can also be combined excellently with a 125 mm backing pad. This makes it possible to use the high material removal of the 21 mm orbit with the particularly common and easy-to-handle 125 mm format. With a 150 mm backing pad, maximum surface performance is the priority. The 125 mm backing pad, on the other hand, enables the use of more compact polishing pads and makes the machine even more versatile. The combination of a 21 mm orbit and 125 mm backing pad is particularly attractive for detailers who want rapid work progress without giving up the universal 125 mm pad format. Complete set with 2 batteries and fast charger Unlike the bare-tool version, the FLEX XFE 2 21 18-EC is supplied in this configuration as a complete cordless set. In addition to the polishing machine, the scope of delivery includes two FLEX 18 V Li-ion battery packs and the corresponding 12/18 V fast charger. This makes the set particularly suitable for users who are new to the FLEX 18 V system or are looking for a fully equipped polishing solution. 2x FLEX Li-ion battery pack 18 V 1x FLEX fast charger 12/18 V 1x damped special hook-and-loop backing pad Machine, batteries and charger in one set Ideal for getting started directly with the FLEX 18 V battery system As powerful as a corded polisher The XFE 2 21 18-EC was developed to deliver high performance throughout the entire battery runtime. The CDC constant electronics counteract unwanted speed fluctuations and thereby support consistent polishing performance. This is particularly important for demanding correction work, where constant machine performance ensures reproducible results. CDC constant electronics for consistent performance Trigger switch for a slow and controlled start Locking function for convenient continuous operation Speed selector wheel accessible from both sides, with detents Soft start and restart protection Temperature monitoring and overload protection Electronic Management System to protect the machine LED display for battery capacity Brushless motor and smooth-running high-performance gearbox The new generation of brushless FLEX motors offers high efficiency and performance. It is complemented by a newly developed high-performance gearbox designed to keep noise and vibration as low as possible. During longer polishing jobs in particular, the smooth machine operation improves user comfort and makes it easier to guide the machine in a controlled manner across the paint. An integrated magnetic solution additionally stabilizes pad rotation and prevents the polishing pad from running on unnecessarily long. This ensures controlled machine behavior when setting it down and supports comfortable handling in professional everyday use. Ergonomic handling for long polishing jobs Ergonomically shaped soft-grip areas enable secure and precise machine guidance. The particularly flat gearbox head reduces the distance between the hand and the paint surface, allowing the XFE 2 21 to be guided in a controlled manner in different working positions. A rubberized resting surface allows the polishing machine to be placed down safely during work. Together with the cordless design, this creates a machine that enables particularly comfortable and unrestricted work on larger vehicles. FLEX 18 V battery system The XFE 2 21 18-EC belongs to the FLEX 18 V battery system and can be operated with FLEX 18 V battery packs. This is particularly practical for users who already use other compatible FLEX cordless tools. The batteries included in the set can therefore also be used within the corresponding FLEX 18 V system. Technical data FLEX XFE 2 21 18-EC Set With its large 21 mm orbit, powerful battery drive and wide adjustable speed range, the FLEX XFE 2 21 18-EC offers ideal conditions for efficient professional vehicle detailing. Battery voltage: 18 V Polishing principle: Free-spinning random orbital Polishing orbit: 21 mm Max. backing pad size: 150 mm No-load speed: 1,350–4,350 rpm No-load stroke rate: 2,700–8,700 strokes/min Number of batteries supplied: 2 Charger included: Yes Dimensions L x W x H: 388 x 125 x 126 mm Weight without battery pack: 2.4 kg Order number: 535000 EAN: 4030293288409 Scope of delivery The FLEX XFE 2 21 18-EC Set includes the polishing machine and the essential components for cordless operation, providing a complete basis for immediate use. 1x FLEX XFE 2 21 18-EC cordless random orbital polisher 1x special damped hook-and-loop backing pad 2x FLEX Li-ion battery pack 18 V 1x FLEX fast charger 12/18 V For professional vehicle detailers and demanding enthusiasts The FLEX XFE 2 21 18-EC Set is particularly suitable for users looking for a powerful cordless random orbital polisher with a large orbit and requiring a complete battery package straight away. The 21 mm orbit ensures rapid work progress, especially on large painted surfaces, and provides a significantly larger pad movement range than machines with a smaller orbit. The combination of high correction performance, free-spinning random orbital motion, brushless motor and cordless 18 V drive makes the XFE 2 21 a versatile machine for cutting, one-step polishing and high-gloss finishing. With the two included batteries and fast charger, this set is the complete solution for anyone who wants to start professional paint correction directly with the new FLEX XFE 2 21.

FLEX XFE 2 21 14-EC C – Random Orbital Polisher with 21 mm Orbit and 1,400 W The FLEX XFE 2 21 14-EC C is a powerful, corded random orbital polisher for professional paint correction and demanding vehicle detailing. With an impressive 1,400 watts of power and an especially large 21 mm polishing orbit, it is designed for high material removal and fast work progress. The large orbit shows its strengths particularly on larger paint surfaces – from intensive defect correction to a high-gloss finish. 21 mm polishing orbit for high material removal and fast work progress 1,400 watts rated power input Free-spinning random orbital movement for controlled polishing 6 m PUR cable for plenty of freedom of movement Brushless motor with high efficiency and power output Maximum backing plate size of 150 mm Ideal for large vehicle surfaces Suitable for everything from treating deeper scratches to finishing 21 mm orbit – when fast paint removal is required The large 21 mm random orbital movement is the defining feature of the FLEX XFE 2 21 14-EC C. Compared with conventional random orbital polishers with, for example, a 15 mm orbit, the polishing pad moves along a larger oscillation circle. This enables particularly fast work progress on larger surfaces and makes the machine an interesting choice for extensive paint correction. Hoods, roofs, doors and large side panels can therefore be processed especially efficiently. In combination with an abrasive polishing pad and a suitable cutting compound, more severe paint defects can be corrected. With a softer pad and a finishing polish, the same machine can subsequently be used to achieve a high-gloss finish. 125 mm or 150 mm backing plate – versatile use The FLEX XFE 2 21 14-EC C is designed for a maximum backing plate size of 150 mm. Vehicle detailers will particularly appreciate the option of using the machine with a 125 mm backing plate. This combines the large 21 mm orbit with the especially common and versatile 125 mm pad format. With a 150 mm backing plate, maximum surface performance is the priority. A 125 mm backing plate, on the other hand, allows the use of more compact polishing pads and increases flexibility when working on different body shapes. The machine can therefore be ideally adapted to the vehicle size, component and desired polishing system. 1,400 watts for consistently powerful polishing With a power input of 1,400 watts, the FLEX XFE 2 21 14-EC C offers ample power reserves for demanding polishing work. The corded design is particularly advantageous for continuous professional use: no battery changes, no charging breaks and a constantly available power supply. The generous 6 m PUR cable provides plenty of freedom of movement around the vehicle. The XFE 2 21 14-EC C therefore combines the benefits of a powerful mains-powered machine with a large operating range. Modern electronics for controlled operation The integrated microprocessor electronics support controlled and consistent polishing performance. The speed can be adjusted to suit the respective combination of paint, polish and polishing pad and is electronically maintained at a constant level under load. Infinitely variable speed preselection Constant speed control via tachogenerator Overload protection Restart protection Temperature monitoring Throttle switch for slow and smooth start-up Lock-on function for comfortable continuous operation Speed adjustment wheel with detents, accessible from both sides Brushless motor and new high-performance gearbox For the XFE 2 21 14-EC C, FLEX relies on a new generation of brushless motors with high efficiency and power output. Combined with the newly developed high-performance gearbox, this creates a powerful polisher designed to reduce noise and vibration levels at the same time. A smooth machine operation is an important factor, especially during longer polishing jobs. Reduced disruptive vibrations improve operating comfort and support precise guidance of the polishing pad across the paint surface. Flat gear head and ergonomic handling The extremely flat gear head reduces the distance between the hand and the paint surface. This allows the machine to be guided precisely and in a controlled manner in different working positions. Ergonomically shaped soft-grip handle areas additionally support secure machine handling. The rubberized resting surface is also practical for everyday use. The polisher can be safely set down during work without unnecessarily slipping on sensitive surfaces. From cutting to a high-gloss finish The large orbit does not make the XFE 2 21 14-EC C a pure cutting machine. By selecting the appropriate polishing pad and polish, the machine can be used for different correction stages. FLEX explicitly describes its range of applications as extending from treating deeper scratches to finishing. This makes the machine suitable for both multi-stage paint correction and efficient one-step applications. For the professional vehicle detailer, this means one machine for fast work progress, defect correction and a final deep gloss. Technical data FLEX XFE 2 21 14-EC C With 1,400 watts, a 21 mm polishing orbit and a wide speed range, the FLEX XFE 2 21 14-EC C is consistently designed for performance-oriented polishing work. The long PUR power cable also provides a large working radius around the vehicle. Power input: 1,400 W Voltage: 230 V Frequency: 50/60 Hz Polishing principle: Free-spinning random orbital Polishing orbit: 21 mm Max. backing plate size: 150 mm No-load speed: 1,350–4,350 rpm No-load stroke rate: 2,700–8,700 strokes/min Cable length: 6 m Cable type: PUR Dimensions L x W x H: 425 x 125 x 128 mm Weight: 2.6 kg Order number: 535001 EAN: 4030293288416 Scope of delivery The FLEX XFE 2 21 14-EC C is supplied with a cushioned special hook-and-loop backing plate, providing a powerful basis for an individually configured polishing system. 1x FLEX XFE 2 21 14-EC C random orbital polisher 1x cushioned special hook-and-loop backing plate Ideal for professional vehicle detailing The FLEX XFE 2 21 14-EC C is particularly interesting for professional detailers, vehicle reconditioning specialists and ambitious users who value high material removal and fast work progress in a random orbital polisher. The 21 mm orbit is especially noticeable on large surfaces and enables efficient treatment of entire vehicles. Anyone looking for greater surface performance than a conventional 15 mm random orbital polisher while also wanting the benefits of a free-spinning random orbital machine will find a powerful solution here. With 1,400 watts, a 21 mm orbit and a 6 m PUR cable, the XFE 2 21 14-EC C is ideally equipped for extensive polishing work without battery changes or charging interruptions.