Polishes – Heavy Cut for Severe Paint Defects

3D AAT 501 is an affordable cutting polish designed for maximum material removal. Specifically developed for automotive paint shops, it’s part of the AAT series, highly regarded in detailing and high-quality paint preparations for its efficiency and performance, comparable to European products but more powerful. 3D AAT 501 delivers strong cutting power, doesn't wear down polishing pads, and produces minimal dust. The ACA 501 Heavy Cut Polish effectively removes scratches starting from P1000 grit. High Cutting Power at an Affordable Price with 3D AAT 501 3D AAT 501 can be used with both orbital and rotary polishers, leaving a very glossy finish without dulling, which is uncommon for heavy cuts. Ideally, it should be followed by a finishing polish such as 3D AAT 502, 3D One Hybrid, or a comparable product. 3D AAT 501 becomes clear quickly during application, allowing for good visibility on the paint surface. It is characterized by a long working time and is economical due to the late breakdown of polishing particles. Very Easy Application: 3D AAT 501 3D AAT 501 is solvent-free, silicone-free, kerosene-free, and free of fillers. Despite its eco-friendly and user-safe formulation, it produces no dust and wipes off easily. We recommend using microfiber pads, wool pads, and medium to hard foam pads for optimal results. Thanks to its high viscosity, 3D AAT 501 doesn't splatter even at high RPMs. 3D AAT 501 provides comparatively less cut than ACA X-TRA 510 and ACA X-TRA 500 polishes but is budget-friendly and still more efficient than most premium polishes from other manufacturers.

The 3D AAT 501 is an affordable paint polish designed for maximum material removal. Created specifically for the needs of paint shops, this product is marked by the manufacturer as part of the AAT series. However, the AAT series is gaining popularity in detailing and high-quality paint preparations due to its excellent results, comparable to European products in terms of application but achieving higher performance. 3D AAT 501 offers a strong cut, does not damage polishing pads, and is dust-free. The ACA 501 Heavy Cut Polish removes scratches from grain 1000. High Material Removal at an Affordable Price with 3D AAT 501 3D AAT 501 paint polish can be used both eccentrically and rotatively, leaving a remarkably glossy finish for a heavy cut polish without matting. Ideally, 3D AAT 501 is used before a finishing polish like the 3D AAT 502, 3D One Hybrid, or a comparable polish. After a short processing time, 3D AAT 501 becomes clear, allowing for good visibility on the paint. It features a very long processing time and is cost-effective due to the late breakdown of the polishing bodies into small particles. Very Easy Application: 3D AAT 501 3D AAT 501 is free of solvents, silicone, kerosene, and fillers. Despite its environmentally friendly formulation, 3D AAT 501 does not produce dust and can be easily wiped off. We recommend using microfiber pads, wool pads, and hard to medium-soft foam pads. Thanks to its high viscosity, 3D AAT 501 does not splatter even at high RPMs. In terms of time, 3D AAT 501 delivers less material removal than the ACA X-TRA 510 and ACA X-TRA 500 polishes. It is affordable yet more powerful than most premium polishes from other manufacturers.

3D ACA X-TRA 500 is an innovative cutting polish designed for HeavyCut and MediumCut applications. Known as 3D 500, this polish is produced by 3D Products in the USA. With 3D 500, paint defect corrections can be made in no time. The product contains advanced "Alpha Ceramic Alumina" polishing particles that allow for significantly longer working time. 3D 500 is suitable for both soft single-layer paints and hard clear coats. It is free from fillers and can be completely removed even with mild paint degreasers. High Cut and Gloss Level with 3D ACA X-TRA 500 3D 500 can be applied using rotary or eccentric machines, leaving a very glossy finish for a HeavyCut polish without hazing. Ideally, 3D 500 is used before a finishing polish such as 3D ACA X-TRA 520, 3D One Hybrid, or any comparable polish. 3D ACA 500 becomes clear after a short working time, allowing a good view of the paint surface. 3D 500 is characterized by a very long working time and is economical due to the late breaking down of the polishing particles into smaller particles. Easy to Use: 3D ACA X-TRA 500 3D 500 is solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 500 does not create dust and can be easily wiped off. It is recommended to use 3D sparingly to avoid any excess. We recommend using microfiber pads, wool pads, and hard to medium-hard foam pads with 3D. Due to its high viscosity, 3D 500 does not splash even at high RPMs.

3D ACA X-TRA 500 is an innovative paint polish designed for HeavyCut and MediumCut applications. Known as 3D 500, this polish is manufactured by 3D Products in the USA. With 3D 500, paint defect corrections can be executed in a very short time. 3D 500 contains innovative "Alpha Ceramic Alumina" polishing agents that allow for a significantly longer working time. It is suitable for both soft single-layer paints as well as hard clear coats. 3D 500 is free from fillers and can be completely removed even with mild paint degreasers. High Cut and High Gloss with 3D ACA X-TRA 500 3D 500 can be used both eccentrically and rotationally, leaving a very shiny finish typical of a HeavyCut polish without hazing. Ideally, 3D 500 should be used before a finishing polish like the 3D ACA X-TRA 520, 3D One Hybrid, or a comparable polish. 3D ACA 500 becomes clear after a short working time, allowing for good visibility on the paint. 3D 500 is characterized by a very long working time and is economically viable due to the late breakdown of the polishing agents into small particles. Very Easy Application: 3D ACA X-TRA 500 3D 500 is solvent-free, kerosene-free, and free from fillers. Despite its eco-friendly and user-friendly formulation, 3D 500 does not produce dust, making it easy to wipe off. It should be used sparingly to avoid excess. We recommend using 3D with microfiber pads, wool pads, and hard to medium-soft foam pads. Thanks to its high viscosity, 3D 500 does not splash even at high RPMs.

3D ACA X-TRA 510 is a cutting-edge paint polish designed for Heavy Cut applications. This polish can be used with both rotary and dual-action polishers. As known from other 3D polishes, it has an extended working time. It works faster than the 3D 500 on severe paint defects. 3D 510 contains innovative 'Alpha Ceramic Alumina' abrasive particles, allowing for a significantly longer processing time. It is suitable for both soft single-layer paints and hard clear coats. 3D 510 is free from fillers and can be completely removed even with gentle paint degreasers. High Material Removal in No Time with 3D ACA X-TRA 510 3D 510 can be used both excentrically and rotationally, leaving a gloss finish typical for Heavy Cut polishes without dulling. Ideally, 3D 510 is used before a finishing polish like the 3D ACA X-TRA 520, 3D One Hybrid, or a comparable product. 3D ACA 510 becomes clear after a short processing time, allowing for good visibility on the paint. It features a very long working time and is economical due to the late breakdown of the abrasive particles into smaller fragments. Very Easy Application: 3D ACA X-TRA 510 3D 510 is solvent-free, kerosene-free, and filler-free. Despite its eco-friendly and user-friendly formulation, 3D 510 does not produce dust and can be easily wiped off. It is advisable to use 3D sparingly to avoid excess. We recommend using it with microfiber pads, wool pads, and hard to medium-soft foam pads. Thanks to its high viscosity, 3D 510 does not spray even at high RPMs.

3D ACA X-TRA 510 is a revolutionary paint polish designed for Heavy Cut applications. This polish can be used both with a dual-action and rotary polisher. As known from other 3D polishes, it can be worked for an extended period of time. It is faster than the 3D 500 when addressing significant paint defects. 3D 510 features innovative "Alpha Ceramic Alumina" polishing agents that allow for a significantly longer working time. 3D 510 is suitable for soft single-layer paints as well as hard clear coats. 3D 510 is free from fillers and can be completely removed even with mild paint cleaners. High Material Removal in Short Time with 3D ACA X-TRA 510 3D 510 can be employed with both dual-action and rotary machines, leaving a very glossy finish typical of a Heavy Cut polish without hazing. Ideally, 3D 510 is used before a finishing polish like the 3D ACA X-TRA 520, 3D One Hybrid, or similar. 3D ACA 510 becomes clear after a short working time, allowing good visibility on the paint. 3D 510 is characterized by a very long working time and is economical to use due to the delayed breakup of the polishing agents into smaller particles. Very Easy Application: 3D ACA X-TRA 510 3D 510 is solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 510 does not create dust and can be easily wiped off. It is recommended to use 3D sparingly to avoid excess. We recommend using 3D with microfiber pads, wool pads, and hard to medium-soft foam pads. Due to its high viscosity, 3D 510 does not splash even at high RPMs.

AETERNO Zenit Pro All-in-One Polish & Sealant – Perfect Paint Care in One Step Powerful paint polish and long-lasting protection combined – the AETERNO Zenit Pro All-in-One Polish & Sealant blends strong cutting agents with a protective sealant. Designed for used car detailing, delicate paint care, or as the perfect wax prep, this innovative polish delivers a flawless finish with brilliant depth. Despite its high cut, it provides exceptional finish quality, creating an incredible clear shine with intense light reflection even on light paints. At the same time, it leaves a durable protective layer that guards the paint against environmental damage. All-in-One Formula: Polish and sealant combined for efficient paint correction. High Cut with Finish Character: Visible defect removal with a brilliant surface. Outstanding Shine on Light Paints: Crystal-clear reflection and striking depth effect. Perfect for Delicate Paints & Classics: Gentle abrasives prevent unnecessary paint removal. Ideal for Used Car Detailing: Removes light scratches, holograms, and boosts gloss. Prepares for Waxes or Solo Protection: Leaves a long-lasting protective layer. Easy Wipe-Off: Polishes out quickly without greasy residues. Silicone-Free: Safe for paint shops and professional use. Gentle Paint Correction with Protective Function AETERNO Zenit Pro All-in-One Polish & Sealant is ideal for sensitive paints and classic cars needing gentle polishing. Modern abrasives deliver high correction with an exceptionally fine finish. Even on sensitive or light uni and metallic paints, it creates an even, hologram-free gloss with impressive clarity. The built-in sealant also forms a protective barrier against dirt, UV rays, and environmental impacts. Optimal Performance with Large-Throw Polishers & Premium Pads The polish unfolds its full potential especially on large-throw dual action polishers from 12mm stroke. Paired with specially designed pads like the Detail Passion Therminator+ or Lake Country HDO Pads, it achieves an impressive balance of defect correction and high-gloss finish. Efficient force transfer of modern large-throw machines speeds up work while the matched pad structure ensures crystal-clear, even surface results. Versatile Use & Effortless Application Perfect for used car detailing, as a fast one-step polish, or finishing well-maintained paints – this product offers maximum flexibility. Its silicone-free formula makes it ideal for paint shops as well. The easy wipe-off behavior simplifies work and leaves a streak-free, clear result with visible gloss boost. Protection and Shine in One Step Thanks to the integrated sealant, AETERNO Zenit Pro All-in-One Polish & Sealant can be used as sole protection or as a base for waxes and additional sealants. The protective layer preserves the paint from external influences and ensures a long-lasting, smooth surface with excellent depth and stunning light reflection.

AETERNO Zenit Pro All-in-One Polish with Sealant – Perfect Paint Care in One Step Powerful paint polish and long-lasting protection combined – the AETERNO Zenit Pro All-in-One Polish with Sealant blends effective polishing agents with a protective sealant. Designed for used car detailing, delicate paint care, or as an ideal wax preparation, this innovative polish delivers a flawless finish with brilliant color depth. Despite its surprisingly high cut, it impresses with top-notch finishing, producing incredible clear shine and intense light reflection even on light paints. At the same time, it leaves a durable protective layer that shields paint from environmental damage. All-in-One Formula: Polish and sealant combined for efficient paint correction. High Cut with Finishing Power: Noticeable defect correction with a brilliant surface. Outstanding Shine on Light Colors: Crystal-clear reflection and visible depth effect. Perfect for Delicate Paint & Classic Cars: Gentle abrasives prevent excessive clear coat removal. Ideal for Used Car Refinishing: Removes light scratches, holograms, and boosts gloss. Wax Prep or Standalone Protection: Leaves a long-lasting protective barrier. Easy Wipe-Off: Quick, effortless polishing without greasy residue. Silicone-Free: Safe for bodyshops and professional use. Gentle Paint Correction with Protective Shield AETERNO Zenit Pro All-in-One Polish with Sealant is perfect for sensitive paints and classic cars needing gentle polishing. Advanced abrasives deliver high correction combined with an exceptionally fine finish. Even on delicate or light solid and metallic paints, it creates a uniform, hologram-free gloss with impressive clarity. The built-in sealant forms a protective barrier against dirt, UV rays, and environmental influences. Optimal Performance with Large-Throw Orbitals and Premium Pads This polish shows its full potential especially on large-throw orbital polishers from 12 mm throw. Paired with specially designed pads like the Detail Passion Therminator+ or Lake Country HDO Pads, it strikes the perfect balance between defect correction and high-gloss finishing. Efficient power transfer from modern large-throw machines ensures fast progress, while the pad structure produces an extremely clear, uniform surface. Versatile Use & Effortless Application Whether for used car detailing, as a quick one-step polish, or finish for well-maintained paint – this product offers maximum flexibility. Its silicone-free formula is also suitable for paint shops. Easy wipe-off simplifies working and leaves a streak-free, clear result with visible gloss enhancement. Protection & Shine in One Step The integrated sealant means AETERNO Zenit Pro All-in-One Polish with Sealant can be used as standalone protection or as a base for waxes and additional layers. The protective coat guards paint from external damage and delivers a durable, smooth surface with excellent color depth and impressive light reflection.

DIY Detail Gold Standard Compound – Step 1 Heavy Cut Polish for Strong Defect RemovalThe DIY Detail Gold Standard Compound is a powerful heavy cut polish designed as the first step in paint correction. As Step 1 in the Gold Standard System, it effectively removes severe swirls, deep scratches, oxidation, and sanding marks, creating an ideal base for a flawless finish. Specially formulated to efficiently correct heavily damaged paint surfaces, it prepares the paint perfectly for the next polishing stage.Step 1 Polish: First phase in the DIY Detail Gold Standard polishing system.Heavy Cut Power: Removes deep scratches, swirls, and oxidation.Effective Defect Correction: Ideal for weathered or heavily used paintwork.Rotary & Dual Action Compatible: Suitable for all common polishing machines.Perfect Base: Prepares paint optimally for Step 2 – Gold Standard Polish.Strong Polish for Scratch Removal and Paint CorrectionWhen paint surfaces show significant defects, a high-performance compound polish is required. The DIY Detail Gold Standard Compound delivers powerful abrasion to effectively eliminate deep scratches, dull spots, and sanding marks. Despite its strength, it remains controllable for efficient defect removal with consistent application.Part of the DIY Detail Gold Standard 2-Step Polishing SystemThe Gold Standard Compound is the first step in DIY Detail’s professional 2-step polishing system. While Step 1 corrects severe defects and prepares the paint, the following Gold Standard Polish (Step 2) provides a final refinement with maximum gloss. This combination ensures highly efficient paint correction with clear, defined stages.Controlled Polishing Performance for Professional ResultsIts specially formulated abrasive technology ensures high defect correction without excessive aggressiveness. This leads to effective paint correction while producing a clean surface ready for the next polishing step. Pairing with suitable polishing pads allows adjusting abrasion level to various paint conditions.Benefits of DIY Detail Gold Standard CompoundHigh Abrasive Power: Removes deep scratches, swirls, and oxidation.Step 1 in Gold Standard System: Perfect prep for finishing polish.Controlled Defect Correction: Efficient paint restoration with smooth application.Machine Compatible: Suitable for rotary and dual action polishers.Professional Paint Correction: Perfect for detailers and advanced enthusiasts.The DIY Detail Gold Standard Compound delivers efficient and controlled paint correction. As a Step 1 polish, it removes significant defects and sets the perfect foundation for a brilliant finish in the next step.

With increased presence in Europe, US manufacturer Dynabrade has refreshed its branding in several areas. This includes the long-favorite DynaRed polish in Germany, now renamed DynaOne with the same formula. Great news: this versatile polish for clear coats, paints, gelcoats, and more is now available in a convenient 250ml size. Dynabrade DynaOne Heavy Cut One Step Polish High and fast material removal on clear coats, paint, gelcoats Compatible with microfiber, lambswool, and foam pads Suitable for both rotary and dual-action polishers Filler- and silica-free formula Water-based composition Rated as a heavy cut polish, DynaRed removes sanding marks starting at P1500 grit. In practice, especially with rotary machines and microfiber or wool pads, it can tackle even P1000 scratches. Despite its aggressive cut, it can deliver a flawless finish. Since it works excellently on car paint as well as boat, caravan, and aircraft finishes, it’s a must-have for pros and enthusiasts alike.

With an intensified presence in Europe, US manufacturer Dynabrade has refreshed some of its product lines, including the popular DynaRed polish in Germany. Now renamed DynaOne with the same formula, this polish is also available in a handy 250ml size. Dynabrade DynaOne Heavy Cut polish with One Step finish High and fast cutting power on clear coat, paint, gelcoats Suitable for microfiber, lambswool and foam pads Usable with both rotary and dual-action polishers Filler and silica free Water-based formula Rated as a heavy cut polish, DynaOne removes sanding marks from P1500 grit and can even handle P1000 grit marks when used with rotary polishers and microfiber or lambswool pads. Despite its strong cutting ability, it delivers a perfect finish. Ideal for automotive, marine, caravan, and aircraft paints, it’s a must-have for pros and hobby detailers alike.

GYEON Q2M Compound Fine Cutting Paste GYEON Q2M Compound is a powerful fine cutting compound designed to effectively eliminate paint defects. Its advanced abrasive technology delivers high cutting power with controlled finish. Scratches, sanding marks, oxidations, and heavy wash swirls are efficiently removed without excessive material removal. The balanced formula ensures precise defect correction and perfectly prepares the surface for subsequent polishing steps. High defect correction with controlled cut Removes scratches, oxidations and sanding marks Suitable for rotary and dual-action polishers Low dust generation during use Clean, consistent working pattern Ideal as the first step in multi-stage polishing GYEON Q2M Compound is especially suited for heavily weathered or stressed paints requiring intense correction. The compound is easy to control and achieves a great balance between cutting power and finish quality. When combined with an appropriate finishing polish, the result is a perfectly prepared surface for sealants or ceramic coatings.

GYEON Q2M Compound Fine Polishing PasteGYEON Q2M Compound is a powerful fine polishing paste designed to effectively eliminate paint defects. Its advanced abrasive technology delivers high cut performance with a controlled finish. Scratches, sanding marks, oxidation, and heavier wash swirls are removed efficiently without excessive paint removal. The balanced formula ensures precise defect correction and prepares the surface perfectly for subsequent polishing steps.High defect correction with controlled paint removalRemoves scratches, oxidation, and sanding marksCompatible with rotary and dual-action polishersLow dust generation during useClean, consistent working patternIdeal as the first step in a multi-stage polishing processGYEON Q2M Compound is especially suited for heavily worn or weathered paints where intensive correction is needed. The polishing paste offers precise control and a great balance between cutting power and finish quality. Used with a suitable finishing polish, it creates a perfectly prepped surface for sealants or ceramic coatings.

GYEON Q2M Compound+ REDEFINED Cutting CompoundGYEON Q2M Compound+ REDEFINED is a high-performance cutting compound designed for maximum defect correction on heavily stressed paint surfaces. The REDEFINED generation has been optimized in cutting power, workability, and dust behavior. It effectively removes deep scratches, heavy oxidation, wet sanding marks, and pronounced wash scratches. Despite its aggressive cutting ability, the polish remains controllable and produces a relatively clean work environment.Maximum defect correction for severely damaged paintsRemoves deep scratches and sanding marksOptimized REDEFINED formula with improved workabilitySuitable for rotary and dual-action polishersReduced dust formationIdeal first step for intensive paint correctionGYEON Q2M Compound+ REDEFINED is used when especially strong cutting power is required. The polish is perfect for heavily weathered or neglected paints as well as repair work after sanding. Due to its intense correction power, a finer polish is recommended afterwards to refine the finish and perfectly prepare the surface for sealant or ceramic coating.

GYEON Q²M Compound+ REDEFINED is a powerful heavy-cut polish designed to restore heavily damaged paint to perfection. Whether dealing with deep scratches, oxidation, or severe defects, this modern abrasive delivers fast, reliable cutting with precise control. Built for professional detailers, it also excels for advanced home users with its efficiency and clean usage.Extremely effective cutting for weathered or heavily scratched paintWater-based, silicone- and filler-free – perfect before sealantsLow dust formulation for clean and efficient workThis low-dust, water-based formula contains no silicones or fillers, making it user-friendly and ideal for prepping paint before coatings or sealants. Leaves paint residue-free and perfectly primed for the next detailing step—without annoying residue or misleading shine fillers.Compatible with dual-action or rotary polishers, the GYEON Q²M Compound+ REDEFINED offers smooth application, minimal product use, and excellent control. For detailers demanding uncompromising results from the very first polishing stage.

GYEON Q2M Compound+ REDEFINED Cutting Paste GYEON Q2M Compound+ REDEFINED is a high-performance cutting paste designed for maximum defect removal on heavily damaged paint surfaces. The REDEFINED generation features enhanced cutting power, improved workability, and reduced dust formation. It effectively removes deep scratches, heavy oxidation, wet sanding marks, and severe wash swirls. Despite its strong cut, the polish remains controllable and produces a relatively clean working environment. Maximum defect correction for heavily damaged paints Removes deep scratches and sanding marks Optimized REDEFINED formula with improved handling Suitable for rotary and dual-action polishers Reduced dust emission Ideal first step for intense paint correction GYEON Q2M Compound+ REDEFINED is used when especially high cutting performance is required. It is perfect for heavily weathered or neglected paint and repair work after sanding processes. Due to its intensive correction power, a finer polish is recommended afterward to refine the finish and prepare the surface perfectly for sealing or ceramic coating.

Innovative machine polish designed for quick restoration of heavily weathered paints, effectively removing deep scratches and lacquer overspray up to 1,200 grit. With its extremely homogeneous abrasive grain, Heavy Cut 9.02 delivers a high cut rate while achieving an excellent gloss level. It allows for prolonged polishing with minimal dust and splatter without burning in, making it easy to wipe off. Suitable for all paint types (both soft and scratch-resistant). Abrasiveness: 9.0. Gloss level: 6.0 Strong abrasive polish for rotary and dual-action use Compatible with all paint types Low dust and splatter

Innovative machine polish for quickly restoring heavily weathered paints, eliminating deep scratches, and effectively removing paint fogs and sanding marks up to 1,200 grit. Thanks to the extremely homogeneous abrasive grain, Heavy Cut 9.02 achieves an exceptionally high cut while providing excellent gloss. It can be polished for an extended period with minimal dust and splatter without burning in and is easy to wipe off. Perfect for all paint types (both soft and scratch-resistant). Abrasiveness: 9.0, Gloss Grade: 6.0 Strong abrasive polish for rotary and dual-action applications Suitable for all paint types Low dust and splatter

Audace is a highly abrasive water-based polish designed to effectively and time-efficiently eliminate defects from hard and ceramic paints. Thanks to Cold Cut Technology, it allows for high defect correction at low RPM, removing scratches from grit 1000. Despite its strong cutting ability, Audace Supreme Cut Compound leaves only light sanding marks, which can be removed with just one finishing step. Fast, reliable, and effective cutting of paint defects Ideal for hard and ceramic paints Excellent finishing quality

Rupes XC-2 XTRA CUT COMPOUND is universally compatible with all machine movements, including dual-action and rotary polishers. This new formula is specifically designed for the quick removal of defects on gelcoat and other high-solid industrial paints, countertops, hard coatings, and in the aerospace industry. The newly developed XC-2 polish replaces the existing XC-1 with a host of benefits. Faster defect removal Improved finish and optimized clarity Superior performance on hard surfaces Better emulsion for easy wiping Water-based formula White color

RUPES Marine XC-100 Extra Cut – High-Performance Polish for Gelcoat, Boat & Aircraft Paints The RUPES Marine XC-100 Extra Cut polishing compound is a powerful 1-step heavy-cut polish designed to quickly remove severe defects on gelcoat, boat paint, and painted aircraft surfaces. Engineered for maximum cutting power with controlled finishing, it’s ideal for heavily weathered surfaces, oxidation, scratches, and sanding marks. As the 1st step polish in the new RUPES Gelcoat & Marine Program, it lays the foundation for professional and systematic detailing. Extreme cutting power for heavily weathered gelcoat and paint surfaces Effective removal of oxidation, scratches, and sanding marks Optimized for boat paint, gelcoat, and aircraft coatings Suitable for rotary and dual-action polishers Part of the structured RUPES Marine polishing system Perfect Start to the RUPES Marine Polishing System The XC-100 is the first step in the newly developed RUPES Gelcoat and Marine Program, tailored to the unique demands of marine and aviation coatings. The system features perfectly matched polishes for maximum efficiency and flawless results: MARINE XC-100 | EXTRA-CUT POLISH COMPOUND MARINE XC-300 | FAST-CUT POLISH COMPOUND MARINE XF-500 | FINE SANDING POLISH MARINE XF-600 | ULTRA-FINE POLISH Maximum Performance on Gelcoat and Specialty Paints Especially on heavily stressed surfaces like boats or aircraft, superior defect correction is essential. The XC-100 impresses with high removal rate combined with efficient handling. It reduces polishing steps and saves valuable time – perfect for professional detailers, shipyards, and aircraft detailing. Optimal Pad Combo for Best Results For maximum cut and control, using premium polishing pads is recommended. The XC-100 works especially effectively with: Detail Passion Therminator Microwool Pad Detail Passion Hybrid Wool Pad Detail Passion Therminator Heavy Cut White Pad The polish is suitable for both rotary and dual-action polishers, offering excellent balance between cut and control in either application. Efficiency and Control for Pro Use The special formula ensures a consistent polishing pattern while minimizing dust and residue, making cleanup easier and streamlining workflow. Less effort, maximum results – ideal for demanding marine and aviation applications.

RUPES Marine XC-300 Fast Cut – Powerful Polish for Gelcoat, Boat & Aircraft Paint The RUPES Marine XC-300 Fast Cut Polish is your go-to for fast, effective removal of medium defects on gelcoat, boat paint, and aircraft surfaces. Designed for pros who demand quick, reliable correction with a clean finish, it strikes the perfect balance between cutting power and gloss. Ideal for lightly weathered surfaces and professional rapid detailing. Efficiently removes medium scratches, oxidation & wear marks Optimized for gelcoat, boat, and aircraft paints Fast results with balanced cut-to-finish ratio Suitable for rotary and dual-action polishers Perfect for time-saving polishing workflows Part of the RUPES Gelcoat & Marine Polishing System XC-300 is a key component of the RUPES Gelcoat and Marine lineup, complementing the heavy-cut XC-100 for quicker correction of moderate defects. This system enables a structured, efficient workflow: MARINE XC-100 | EXTRA-CUT POLISH MARINE XC-300 | FAST-CUT POLISH MARINE XF-500 | FINE CUT POLISH MARINE XF-600 | ULTRA-FINE POLISH Fast Defect Removal with Impressive Finish Designed specifically for users prioritizing efficiency and time savings, XC-300 reliably removes typical wear, light oxidation, and medium scratches, delivering a significantly enhanced surface finish—often reducing the need for additional polishing steps. Optimal Pad Pairing for Maximum Results For best performance, pair with compatible polishing pads: Detail Passion Hybrid Wool Pad Detail Passion Therminator Medium Cut Orange Pad Detail Passion Therminator Heavy Cut White Pad Works flawlessly with both rotary and dual-action polishers, ensuring excellent control and consistent results. Efficient Workflow & Clean Processing Thanks to its advanced formula, XC-300 offers low residue and easy wipe-off, improving work efficiency. Perfect for larger surfaces like boats or aircraft, it’s built for professionals seeking fast, repeatable outcomes.

Highly abrasive cutting paste that removes scratches and inclusions from repaired or original factory paintwork. Leaves minimal processing marks and almost no polishing residues. Easy to use. High material removal with minimal matting. Removes sanding marks from P1000 sandpaper. Strong cutting polish for rotary and eccentric use Removes sanding marks up to P1000 and finer Ideal for severe paint defects Minimal matting with maximum removal

High-abrasive polishing paste that removes scratches and inclusions from repaired parts or original factory paints. Leaves minimal processing marks and nearly no polishing residues. Easy to work with. High material removal with minimal dulling. Removes sanding marks from P1000 sandpaper. Strong cutting polish for rotary and eccentric use Removes sanding scratches up to P1000 and finer Ideal for severe paint defects Minimal dulling with maximum material removal

High-effective cutting polish designed for high processing speeds, featuring ultra-pure, extremely hard aluminum oxide. Faster with a large processing window. Removes scratches down to P800. Extreme, fast-cutting polish for rotary and eccentric use Removes scratches down to P800 and finer Ideal for severe paint defects Large processing window

Highly effective grinding polish for high process speeds, contains pure, extremely hard aluminum oxide. Even faster, large processing window. Removes scratches up to P800. Extreme, fast-cutting polish for rotary and eccentric use Removes scratches up to P800 and finer Ideal for severe paint defects Large processing window