Polishing Machines with Cable: Consistent Performance for Professional Results

The Dynabrade DB8E is the result of a collaboration between the US compressed-air tool specialist Dynabrade and renowned detailer Renny Doyle. As one of the first specialist retailers in Europe, Chemical-Shark.de was able to extensively test the new forced-rotation dual action polisher. The verdict: impressive smoothness, enormous power delivery and top-level operating comfort. In this complete kit, the DB8E is not only available as an individual machine, but is perfectly matched with compounds, pads and towels for professional paint correction. Dynabrade DB8 – Technical specifications of the forced-rotation dual action polisher Forced-rotation dual action polisher (clockwise rotation) Powerful 1000-watt motor with exceptionally smooth operation 11 adjustable speed settings – up to 350 rpm rotationally 6.8 mm orbit for high defect correction with maximum control 125 mm and 150 mm backing plates included Durable 6 m power cable – ideal for workshop use Weight: 2.5 kg Dynabrade DB8E Complete Kit – Kit contents Dynabrade DB8E forced-rotation dual action polisher 5" (125 mm) and 6" (150 mm) backing plates AETERNO Zenit Pro Cut Compound 1000 g AETERNO Zenit Pro Finishing Polish 1000 g Detail Passion 125 mm Foamed Hybrid Wool Heavy Cut polishing pad Ø 140 mm Detail Passion 125 mm Therminator Super Heavy Cut polishing pad, white, Ø 125/135 mm Detail Passion 125 mm Therminator Intermediate polishing pad, blue, Ø 125/135 mm Detail Passion 125 mm Therminator Medium Polish polishing pad, maroon, Ø 125/135 mm Detail Passion 125 mm Therminator Finish polishing pad, black, Ø 125/135 mm Detail Passion Tough 2Face Double40-420gsm polishing towel, icegrey Detail Passion Tough 2Face Double40-420gsm polishing towel, seablue Handbook and operating instructions Maximum smoothness and control – uncompromising even in the complete kit The Dynabrade DB8E delivers a combination of forced rotation and exceptionally low-vibration operation that has rarely been achieved before. The state-of-the-art composite drive system ensures highly direct power transmission while providing excellent control. The 6.8 mm orbit enables precise work – even on sensitive paintwork or smaller components. At the same time, the machine offers sufficient power reserves for hard, scratch-resistant clear coats. Perfectly matched polishing system for cutting and finishing With the AETERNO Zenit Pro Cut Compound, even deeper defects, scratches and severe car-wash marks can be removed efficiently. Combined with the Foamed Hybrid Wool Heavy Cut Pad or the Therminator Super Heavy Cut Pad, it delivers enormous cutting power while maintaining controlled operation. The AETERNO Zenit Pro Finishing Polish provides the finishing touch. In combination with the Therminator Intermediate, Medium Polish or Finish Pad, holograms, haze and fine swirls can be reliably removed. The result is a deep-gloss, hologram-free finish with maximum clarity. Professional pads and towels for repeatable results The included Detail Passion Therminator Pads cover the entire range from Super Heavy Cut to Finish. Their high shape retention and precise foam structure work perfectly with the DB8E's forced rotation. The Foamed Hybrid Wool Pad combines the cutting performance of wool with the control of modern foam technology – ideal for fast defect correction. The set is completed by the high-quality Detail Passion Tough 2Face microfiber towels, which safely pick up polishing residue and enable scratch-free wipe-off. This means every step – from heavy cutting to final gloss inspection – is covered professionally. Perfectly prepared – complete kit for maximum paint correction This complete polishing machine kit provides a fully coordinated system for professional paint defect correction. The machine, compounds, pads and towels work together perfectly to enable efficient, safe and repeatable results. Whether you are dealing with heavy defects, dull paintwork or fine micro-scratches – with the Dynabrade DB8E Complete Kit, you are fully equipped from removing sanding marks through to the perfect finish. Get started now and experience professional paint preparation at the highest level.

Dynabrade, the global market leader in pneumatic tools, developed the DB8E together with renowned detailer Renny Doyle. This forced-rotation dual-action polisher sets new standards in professional paint correction. We at Chemical-Shark.de extensively tested the machine in everyday professional use. The result: an exceptionally smooth-running, powerful and simultaneously precise polisher that meets the highest demands, from ambitious enthusiasts to professionals. Unprecedented Smoothness – Forced Rotation Redefined The Dynabrade DB8E combines forced rotation with a state-of-the-art composite drive system and efficient cooling. It operates with extremely low vibration, offers enormous torque and can be used as a true all-round machine from cutting to finishing. Ideal for one-step applications, suitable for both ultra-hard and sensitive paint finishes, and particularly easy to control thanks to its 6.8 mm throw. Extremely low-vibration operation despite forced rotation All-round machine from cutting to finishing State-of-the-art composite drive system with efficient cooling Ideal for one-step applications Suitable for hard and sensitive paint finishes Controlled handling thanks to the 6.8 mm throw Maximum Control and Consistent Performance Forced-rotation dual-action polishers have traditionally been considered powerful, but often rough-running. The DB8E impressively disproves this assumption. Its specially developed drive system significantly minimizes vibration and ensures exceptionally smooth and precise operation. Even with soft finishing pads, the machine remains stable and controllable. Especially during one-step corrections or when polishing sanding marks, it impresses with its direct response and highly consistent power delivery. Efficient Cooling for Maximum Cutting Performance Thanks to its sophisticated cooling technology, the temperature at the pad and machine head remains consistently low. Particularly in combination with microfiber pads, Microwool or hybrid wool pads, the DB8E delivers impressive cutting performance. Cutting power can be further increased by applying targeted pressure without thermally overloading the system. At the same time, the finish remains clean and controllable – a decisive advantage when working on modern, sensitive clear coats. Clockwise Forced Rotation for Professional Use A practical detail is the clockwise forced rotation. While many forced-rotation dual-action polishers from other manufacturers rotate counterclockwise, most rotary machines and free-spinning dual-action polishers rotate clockwise. Since polishing pads adapt to a direction of rotation during use, switching to the opposite rotation can cause vibration and unstable operation. The Dynabrade DB8E completely avoids this problem and allows flexible use of existing pads in professional applications. Perfect Pad Combinations for Cutting and Finishing For maximum results, we recommend high-performance pads from Detail Passion and Lake Country. From powerful cutting to high-gloss finishing, different paint conditions can be treated efficiently and with excellent control. Particularly recommended are shape-retaining foam pads for strong defect correction and fine-pored finishing pads for a hologram-free final result. Combined with the DB8E, they create a perfectly matched system for professional paint refinement. Technical Specifications of the Dynabrade DB8E Forced-rotation dual-action polisher, clockwise rotation 1000-watt high-performance motor 11 speed settings Up to 350 rpm (rotary) 6.8 mm forced-driven throw 125 mm and 150 mm backing plates included Power cable approx. 6 m Weight: 2.5 kg

Flex PE 2 Brushless Rotary Polisher 14-EC C 125/150 mm The Flex PE 2 Brushless Rotary Polisher 14-EC C is a no-compromise rotary polisher for pros designed for maximum paint removal and top efficiency. Unlike dual-action or forced dual-action polishers, this model features a pure rotary drive. This achieves the highest possible paint cut—perfect for heavily weathered paints, deep scratches, and intensive correction work in professional settings. Rotary polisher with pure rotary drive Maximum cut for fast and effective paint correction Perfect for pros, detailers, and paint shops Ideal for removing severe defects in multiple polishing steps Brushless high-performance motor for consistent power High torque even under load Compatible with 125 mm and 150 mm polishing pads 6 meter cable for maximum mobility The rotary drive of the Flex PE 2 guarantees direct, unfiltered power transfer to the paint, efficiently removing deep scratches, heavy oxidation, sanding marks, and paint defects. This makes it the first choice for multi-stage polishing in professional detailing and body shops. Equipped with a modern brushless motor, the Flex PE 2 delivers exceptional efficiency, long service life, and stable performance. Even under heavy pressure, the speed remains consistent—a crucial advantage for demanding correction work and tough paints. The Flex rotary polisher also impresses with its ergonomic design. Balanced weight distribution, low vibration, and precise speed control enable controlled and safe handling, even during long polishing sessions or intensive cutting steps. Thanks to the 6 meter cable length, the Flex PE 2 offers maximum freedom of movement during work. This ensures efficient workflow without constant unplugging—ideal for workshops, detailers, and professional studios. The Flex PE 2 rotary polisher set includes: FLEX PE 2 rotary polisher brushless 14-EC C 150 mm padded hook-and-loop polishing pad Manual and warranty documents 125 mm polishing pad not included but available separately to adapt the polisher for smaller surfaces and precision work. The Flex PE 2 rotary polisher is the perfect choice for users demanding maximum paint removal, uncompromising power, and professional results. It’s targeted at pros who want to efficiently eliminate severe paint defects and achieve flawless multi-stage polishing.

Flex XCE 2 8 Forced Rotation Polisher brushless 14-EC C 125/150 mm The Flex XCE 2 8 Forced Rotation Polisher brushless 14-EC C is an extremely powerful Flex polisher specially designed for maximum correction performance. Unlike free-running dual action polishers, this machine operates with forced rotation. This results in significantly higher material removal, even on hard or heavily weathered paint. The 8 mm orbit combined with forced rotation makes it the ideal choice for efficient one-step polishes and removing more severe paint defects. Forced rotation polisher for consistent, powerful cut Significantly more material removal than free-running DA polishers 8 mm orbit for controlled, effective paint correction Perfect for one-step polishes and deeper paint defects Brushless high-performance motor for steady power Quiet operation and speed-stable under load 6 meter cable for maximum freedom of movement Professional polisher for detailing, workshops, and dealerships Thanks to the forced rotation, the backing plate of the Flex XCE 2 8 stays in constant motion – even on edges, curves, or under higher pressure. This ensures uniform, reproducible cutting and makes the polisher especially effective on weathered paint, wash scratches, and deeper defects. The powerful brushless motor guarantees high efficiency, low heat generation, and long lifespan. Combined with the precisely tuned 8 mm orbit, it offers a controlled polishing behavior with significantly higher correction power compared to classic dual action polishers. Ergonomically, the Flex forced rotation polisher also excels: Its balanced design fits securely in hand, reduces vibrations, and allows fatigue-free working – even during longer polishing sessions or intense one-step corrections. For professional use, the Flex XCE 2 8 polisher comes with a 6 meter long cable, providing optimal freedom of movement and efficient, uninterrupted workflow in workshops, dealerships, or detailing studios. The package contents of the Flex XCE 2 8 Forced Rotation Polisher are thoughtfully composed: Polisher FLEX XCE 2 8 with 8 mm orbit and forced rotation With dampened 150 mm hook-and-loop backing plate User manual and warranty terms Not included is the 125 mm backing plate. It can be purchased separately to adapt the forced rotation polisher flexibly to smaller surfaces or specific applications. The Flex XCE 2 8 Forced Rotation Polisher is the perfect choice for those seeking an uncompromisingly powerful Flex polisher to effectively correct severe paint defects and achieve top results in the one-step process.

Flex XFE 2 15 Rotary Polisher Brushless 14-EC C 125/150 mm The Flex XFE 2 15 Rotary Polisher Brushless 14-EC C is the latest generation of powerful rotary polishers from Flex. Compared to its predecessor, this model has been significantly enhanced in key areas. The new brushless high-performance motor delivers more power, runs more efficiently, and ensures consistent high performance even under demanding polishing tasks. The 15 mm orbit guarantees high material removal with an excellent finish. 15 mm orbit for efficient paint correction and flawless finish Significantly increased motor power compared to previous model New ergonomic design for maximum control Latest generation brushless motor for efficiency and durability Optimized cooling system at the polishing pad reduces heat buildup 6-meter cable length for greater freedom of movement Free-spinning rotor ensures hologram-free paint surfaces Ideal for beginners and professionals alike Perfect for dealerships, detailing shops, and professional car care The noticeably higher motor power results from cutting-edge motor technology combined with the perfectly tuned 15 mm orbit. This combo delivers stronger torque, stable RPMs under load, and a uniform polishing result — ideal for professional use and effective hologram-free paint correction. Ergonomics also set new standards with the XFE 2 15: the newly developed design fits perfectly in the hand, reduces fatigue, and provides precise control. Especially during long polishing sessions with the powerful 15 mm orbit, users benefit from smooth, controlled operation. Another highlight is the optimized cooling system right at the polishing pad. This innovation effectively dissipates heat from the backing plate, pad, and paint surface. The result is longer working intervals, less thermal stress, and significantly better material protection — even during intensive polishing runs. For maximum practicality in professional daily use, the cable length was extended to 6 meters. This provides much more freedom of movement, reduces plug changes, and enables a smooth and efficient workflow in workshops, dealerships, or detailing studios. The scope of delivery for the Flex XFE 2 15 brushless 14-EC C is optimized for professional use and includes all essential components for immediate start: FLEX XFE 2 Polisher with 15 mm orbit Hex key for polishing pad change 150 mm polishing pad Manual and warranty conditions Not included is the 125 mm polishing pad, which can be purchased separately to adapt the machine to smaller areas or specific polishing tasks. The Flex XFE 2 15 brushless 14-EC C is the perfect choice for dealerships, professional detailers, and car care companies seeking a powerful rotary polisher with 15 mm orbit, excellent ergonomics, and uncompromising hologram-free results.

FLEX XFE 2 21 14-EC C – Random Orbital Polisher with 21 mm Orbit and 1,400 W The FLEX XFE 2 21 14-EC C is a powerful, corded random orbital polisher for professional paint correction and demanding vehicle detailing. With an impressive 1,400 watts of power and an especially large 21 mm polishing orbit, it is designed for high material removal and fast work progress. The large orbit shows its strengths particularly on larger paint surfaces – from intensive defect correction to a high-gloss finish. 21 mm polishing orbit for high material removal and fast work progress 1,400 watts rated power input Free-spinning random orbital movement for controlled polishing 6 m PUR cable for plenty of freedom of movement Brushless motor with high efficiency and power output Maximum backing plate size of 150 mm Ideal for large vehicle surfaces Suitable for everything from treating deeper scratches to finishing 21 mm orbit – when fast paint removal is required The large 21 mm random orbital movement is the defining feature of the FLEX XFE 2 21 14-EC C. Compared with conventional random orbital polishers with, for example, a 15 mm orbit, the polishing pad moves along a larger oscillation circle. This enables particularly fast work progress on larger surfaces and makes the machine an interesting choice for extensive paint correction. Hoods, roofs, doors and large side panels can therefore be processed especially efficiently. In combination with an abrasive polishing pad and a suitable cutting compound, more severe paint defects can be corrected. With a softer pad and a finishing polish, the same machine can subsequently be used to achieve a high-gloss finish. 125 mm or 150 mm backing plate – versatile use The FLEX XFE 2 21 14-EC C is designed for a maximum backing plate size of 150 mm. Vehicle detailers will particularly appreciate the option of using the machine with a 125 mm backing plate. This combines the large 21 mm orbit with the especially common and versatile 125 mm pad format. With a 150 mm backing plate, maximum surface performance is the priority. A 125 mm backing plate, on the other hand, allows the use of more compact polishing pads and increases flexibility when working on different body shapes. The machine can therefore be ideally adapted to the vehicle size, component and desired polishing system. 1,400 watts for consistently powerful polishing With a power input of 1,400 watts, the FLEX XFE 2 21 14-EC C offers ample power reserves for demanding polishing work. The corded design is particularly advantageous for continuous professional use: no battery changes, no charging breaks and a constantly available power supply. The generous 6 m PUR cable provides plenty of freedom of movement around the vehicle. The XFE 2 21 14-EC C therefore combines the benefits of a powerful mains-powered machine with a large operating range. Modern electronics for controlled operation The integrated microprocessor electronics support controlled and consistent polishing performance. The speed can be adjusted to suit the respective combination of paint, polish and polishing pad and is electronically maintained at a constant level under load. Infinitely variable speed preselection Constant speed control via tachogenerator Overload protection Restart protection Temperature monitoring Throttle switch for slow and smooth start-up Lock-on function for comfortable continuous operation Speed adjustment wheel with detents, accessible from both sides Brushless motor and new high-performance gearbox For the XFE 2 21 14-EC C, FLEX relies on a new generation of brushless motors with high efficiency and power output. Combined with the newly developed high-performance gearbox, this creates a powerful polisher designed to reduce noise and vibration levels at the same time. A smooth machine operation is an important factor, especially during longer polishing jobs. Reduced disruptive vibrations improve operating comfort and support precise guidance of the polishing pad across the paint surface. Flat gear head and ergonomic handling The extremely flat gear head reduces the distance between the hand and the paint surface. This allows the machine to be guided precisely and in a controlled manner in different working positions. Ergonomically shaped soft-grip handle areas additionally support secure machine handling. The rubberized resting surface is also practical for everyday use. The polisher can be safely set down during work without unnecessarily slipping on sensitive surfaces. From cutting to a high-gloss finish The large orbit does not make the XFE 2 21 14-EC C a pure cutting machine. By selecting the appropriate polishing pad and polish, the machine can be used for different correction stages. FLEX explicitly describes its range of applications as extending from treating deeper scratches to finishing. This makes the machine suitable for both multi-stage paint correction and efficient one-step applications. For the professional vehicle detailer, this means one machine for fast work progress, defect correction and a final deep gloss. Technical data FLEX XFE 2 21 14-EC C With 1,400 watts, a 21 mm polishing orbit and a wide speed range, the FLEX XFE 2 21 14-EC C is consistently designed for performance-oriented polishing work. The long PUR power cable also provides a large working radius around the vehicle. Power input: 1,400 W Voltage: 230 V Frequency: 50/60 Hz Polishing principle: Free-spinning random orbital Polishing orbit: 21 mm Max. backing plate size: 150 mm No-load speed: 1,350–4,350 rpm No-load stroke rate: 2,700–8,700 strokes/min Cable length: 6 m Cable type: PUR Dimensions L x W x H: 425 x 125 x 128 mm Weight: 2.6 kg Order number: 535001 EAN: 4030293288416 Scope of delivery The FLEX XFE 2 21 14-EC C is supplied with a cushioned special hook-and-loop backing plate, providing a powerful basis for an individually configured polishing system. 1x FLEX XFE 2 21 14-EC C random orbital polisher 1x cushioned special hook-and-loop backing plate Ideal for professional vehicle detailing The FLEX XFE 2 21 14-EC C is particularly interesting for professional detailers, vehicle reconditioning specialists and ambitious users who value high material removal and fast work progress in a random orbital polisher. The 21 mm orbit is especially noticeable on large surfaces and enables efficient treatment of entire vehicles. Anyone looking for greater surface performance than a conventional 15 mm random orbital polisher while also wanting the benefits of a free-spinning random orbital machine will find a powerful solution here. With 1,400 watts, a 21 mm orbit and a 6 m PUR cable, the XFE 2 21 14-EC C is ideally equipped for extensive polishing work without battery changes or charging interruptions.

Rupes BigFoot LHR125E Duetto Dual-Action Polisher 125 mm STD Kit The Rupes BigFoot LHR125E Duetto is a powerful dual-action polisher for professional paint correction and efficient finishing. With its 15 mm orbit and 125 mm backing plate, it combines high polishing performance with precise control and is suitable for a wide range of polishing applications on automotive paintwork. The increased 15 mm orbit improves polishing efficiency and working performance. The new PrecisionPro backing plate supports an especially smooth and controlled operation. New POLYSYNTHEC gear wheels reduce noise and vibrations, thereby increasing user comfort. The redesigned construction combines a modern machine design with the proven balance and precision of the LHR12E. The 125 mm backing plate provides a versatile working size for numerous paint surfaces and vehicle areas. 15 mm Orbit for Efficient Paint Correction The 15 mm orbit enables efficient treatment of medium-sized and larger paint surfaces while offering excellent control. Swirls, light to medium scratches, oxidation and other paint defects can be specifically treated. The balanced combination of orbit, power and machine balance makes the LHR125E suitable for both correction work and finishing polishing steps. High Working Comfort and Controlled Operation The redesigned construction of the Rupes BigFoot LHR125E Duetto is designed for quiet and comfortable operation. POLYSYNTHEC gear components help reduce noise and vibrations, while the PrecisionPro backing plate supports precise and even movement. Technical Data With 400 watts of power, electronic speed control and an operating range of 3,000 to 5,500 rpm, the LHR125E Duetto offers versatile adjustment for different polishes, polishing pads and paint conditions. Backing plate: 125 mm / 5" Orbit: 15 mm / 19/32" Power: 400 W Speed: 3,000–5,500 rpm Weight: 2 kg Electronic speed control: Yes Spindle thread: M8-F Backing plate: 980.720 Power cable: 9 m / 30 ft STD Kit The STD version provides the professional foundation for an individually configured polishing system. Polishing pads and compounds can be selected according to the specific paint condition, desired correction level and finish.

The newly developed Rupes LHR15 Mark V polishing machine is the successor of the popular Mark III. It is the wired version of the HLR15 battery polishing machine, which Rupes introduced a few months earlier featuring a new gearbox and backing plate. It shares the drive unit and significantly improved running smoothness with this machine compared to its predecessor. Despite higher comfort, the machine is more powerful and now comes with a 9m cable. Completely newly developed free-running eccentric New anti-spinning ring Extreme running smoothness New gearbox technology LHR15 Mark V Bigfoot STD LHR15 MarkV Eccentric Polishing Machine Backing plate 125mm Delivered in a box including warranty card and manual

Rupes BigFoot LHR75II Dual-Action Polisher 75 mm STD Kit The Rupes BigFoot LHR75II is a compact dual-action polisher for precise polishing work on small and hard-to-reach painted surfaces. With its 12 mm orbit and compact 75 mm format, it is ideal for bumpers, pillars, spoilers, narrow bodywork areas and detailing work. The revised generation combines excellent control with improved user comfort and efficient polishing performance. New POLYSYNTHEC gear wheels reduce noise, vibration and weight, enabling more comfortable and controlled operation. The newly designed head cover increases the machine's durability, while the 12 mm orbit provides high polishing performance on small surfaces. Non-slip rubber inserts improve grip and support precise guidance of the polisher. The easily accessible speed control allows quick adjustment of the speed to the paint condition, polish and polishing step. The compact 75 mm backing plate makes the LHR75II the ideal complement to larger BigFoot polishers. Precise Paint Correction on Small Surfaces Combining a compact machine head, a 12 mm orbit and 400 watts of power, the Rupes LHR75II offers a balanced combination of cutting performance and control. This allows swirls, light scratches, sanding marks and other paint defects to be treated precisely. The compact machine format is particularly advantageous on contoured or narrow bodywork areas. Technical Data The Rupes BigFoot LHR75II was specifically developed for controlled detailing work and offers compact dimensions as well as a practical speed range. Backing plate: 75 mm / 3" Orbit: 12 mm / 1/2" Power: 400 W Speed: 3,000–5,500 rpm Weight: 1.8 kg Electronic speed control: Yes Spindle thread: M6-F Backing plate: 990.007 Power cable: 9 m / 30 ft STD Kit The STD version provides the professional foundation for individually configuring the polishing system. Polishing pads and compounds can be selected to suit the respective paintwork, defect pattern and desired polishing result.

With the free-running orbital polisher EX620, the Asian manufacturer ShineMate expands its product range and applies the processing and material quality known and appreciated from the battery polisher EB351 to corded polishers. The new generation features an optimized 800W motor designed for maximum performance and user-friendliness. The EX620 polisher meets both enthusiast and professional demands at a very attractive price. Unmatched Powerful 125mm Orbital Polisher Powered by a carbon brush electric motor, the polisher achieves 3,000 to 5,800 orbital rotations per minute. With these performance values, an unprecedented cut for orbital polishers is achieved; compared to the previous model EX610, the rotation speed has been increased by 30% and the torque by 60%. A sophisticated cooling system ensures that prolonged operation at this performance level is feasible without overheating. The weight is 2.6kg and the orbital stroke is 15mm. Perfect Ergonomics for Polishing Enjoyment The housing of the EX620 orbital polisher is made of high-quality plastic with a rubberized soft grip for secure handling in the grip and guiding areas. All materials are designed for maximum durability. The infinitely variable selection switch allows you to adjust the power in 6 stages from distributing polish to heavy cutting. The operation begins with a switch that enables a soft startup. A locking button allows for continuous operation. The backing pad is equipped with an advanced cooling system, and any polishing dust generated is blown away. The eccentric weight is CNC manufactured from high-strength metal. EX620 125mm Orbital Polisher - 15mm Stroke Free-running 15mm orbital polisher EX620 with 125mm backing pad 5m cable 125mm backing pad Hex tool for changing the backing pad Heavy Cut Microfiber Polishing Pad Medium Cut Microfiber Polishing Pad Finishing Foam Polishing Pad Instruction manual Hex tool for changing the backing pad

With the EX605, the Asian manufacturer ShineMate produces an interesting 12mm stroke polisher. In this revised version, many new materials and technologies are used. It features a very low-vibration 500W motor, designed for both maximum performance and user-friendliness. The EX605 is the second 12mm stroke polisher with a 125mm backing plate in our range, alongside the Rupes Duetto LHR12E. The EX605 dual-action polisher caters to both enthusiast and commercial pro demands, all at a very attractive price. Smooth Operation and User Comfort for Relaxed Orbital Polishing: ShineMate EX605 The advantage of a 12mm stroke over a 15mm stroke lies in the very high smoothness that these machines offer. The 12mm EX605 also weighs only 2.2kg, thanks to its compact design. The polisher operates at 2,500 to 5,500 orbital rotations per minute. To ensure that prolonged use remains cool, a sophisticated cooling system is implemented. The included cable measures 5m. Perfect Ergonomics for Enjoyable Polishing The housing of the EX620 dual-action polisher is made from high-quality plastic with a rubberized soft grip for a secure hold in the grip and guiding area. All materials are designed for the highest stress resistance. The infinitely variable control lever allows for power adjustment in 6 stages, from spreading polish to polishing and heavy cutting. Operation starts with a switch that enables a soft start. With a locking feature, the operation can be fixed. The backing plate is equipped with an advanced cooling system, while any polishing dust created is blown away. The eccentric weight is made from high-strength metal using CNC technology. EX605 125mm Dual Action Polisher 12mm Stroke Free-running 12mm Dual Action Polisher EX605 with 125mm backing plate 5m cable 125mm backing plate Hex tool for backing plate change Medium Cut Foam Polishing Pad Finishing Foam Polishing Pad German manual Hex tool for backing plate change

The freespinning orbital polisher EX620 from ShineMate marks a new level in their product line, complementing the appreciated processing and material quality of the battery-powered EB351 now in their corded models. This new generation features an optimized 800W motor, designed to deliver maximum performance while ensuring user friendliness. The EX620 polisher caters to both passionate enthusiasts and professional users alike, all at an attractive price. Unmatched Powerful Orbital Polisher with 150mm Backing Pad Powered by a carbon brush motor, this polisher can achieve 3,000 to 5,800 orbital revolutions per minute. With these performance metrics, it can provide a level of cut previously unseen in orbital polishers, increasing rotation speed by 30% and torque by 60% compared to the previous model EX610. To ensure low heat during prolonged use, an advanced cooling system is integrated. The unit weighs 2.6kg with a stroke of 15mm. Perfect Ergonomics for Polishing Joy The EX620's body is constructed from high-quality plastic with a rubberized soft grip for secure handling in the grip and control areas. All materials are built to withstand the highest loads. The stepless control lever allows users to adjust power settings in 6 stages, from distributing polish to polishing and heavy cutting. The start is controlled by a switch that enables smooth operation. A lock button is also provided for sustained operation. The backing pad is equipped with an advanced cooling system, and any generated polishing dust is expelled. The eccentric weight is precision-crafted from high-strength metal using CNC technology. Orbital Polisher EX620 150mm 21mm Stroke Freespinning 21mm orbital polisher EX620 with 150mm backing pad 5m cable 150mm backing pad Hex tool for changing the backing pad Polishing pad Heavy Cut Microfiber Polishing pad Medium Cut Microfiber Polishing pad Finishing Foam Operating manual Hex tool for changing the backing pad Convertible to 125mm backing pad!

Getting started is easy! Following this motto, we have assembled a polishing machine set that allows every car enthusiast, regardless of gender, to have a swift and secure entry into the art of polishing. The set includes the ShineMate EX605-05/12 polishing machine, Detail Passion polishing pads, the universal 3D Hybrid One polish, and a microfiber cloth for wiping off polish residues. With this bundle, scratches, weathering, and other paint defects can be effortlessly removed. This is intentionally not a cheap bundle, but a set that will provide years of enjoyment. ShineMate, Detail Passion, and 3D Complete Set with Polishing Machine EX605-05/12 12mm corded eccentric for cutting and high gloss finish 4 high-quality Detail Passion polishing pads - Made in Germany 3D Hybrid One polish 236ml for cutting to finish ShineMate Eccentric Polishing Machine EX605 125mm 12mm Stroke Free-running 12mm eccentric polisher EX605 125mm backing plate 5m cable 125mm backing plate Hex tool for changing the backing plate Medium cut polishing pad foam Finishing polishing pad foam German manual Hex tool for changing the backing plate The Perfect Polish for Professionals and Enthusiasts: 3D One Hybrid For professionals, it is essential that the consumption of a polish is kept as low as possible while allowing for multiple processing steps. 3D One Hybrid can be used with all types of polishing pads - foam pads, microfiber pads, lambswool pads, wool pads. Car care enthusiasts will appreciate that 3D One Hybrid is low-odor and can be processed for an extended time. For simple hand polishing, 3D One Hybrid can even be applied in direct sunlight. 3D One Hybrid is free from fillers and can be completely removed even with gentle degreasers. 3D One Hybrid is ideal as a polish for subsequent sealants using silicon, polymers, or high-quality waxes. DP Pro Therminator Polishing Pads With the DP Pro Therminator polishing pad, the German manufacturer Detail Passion addresses the hype of so-called thermally stable or thermoresistant polishing pads while also realizing its own ideas. The advantages of thermally stable polishing pads are clear. Continuous control of paint or clear coat removal during the polishing process is guaranteed, as the foam does not lose its compression strength due to heat exposure. This means that even at higher speeds, pressure can be maintained, preventing a drop in cutting performance. Similarly, the cell structure is preserved, leading to optimal cooling and minimizing compression. Based on experience with extremely fast heavy cut polishes like the 3D Car Care 510 and the universal 3D One Hybrid, Detail Passion has implemented additional features in the polishing foam. DP Pro Therminator white - Super Heavy Cut for strong paint defects DP Pro Therminator orange - Medium Cut for one step, all in one, or medium strength polishes DP Pro Therminator maroon - Medium Polish for medium polishes and finish DP Pro Therminator black - Gloss finish for sensitive paints or extreme gloss