3D GLW Wheel & Tire Cleaner 473ml – Tire Cleaner & Wheel Cleaner The 3D GLW Wheel & Tire Cleaner 473ml is a powerful tire and wheel cleaner for thoroughly cleaning wheels and tires. The ready-to-use formula removes road grime, brake dust, and old tire care residue, leaving the surface perfectly prepared for subsequent detailing. Instead of using two different cleaners, tires and wheels can be conveniently cleaned with a single product. 2-in-1 tire and wheel cleaner Cleans wheels and tires in a single step Removes brake dust, road grime, and deposits Dissolves old tire care residue and tire dressings Ideal for preparing the surface for a new tire dressing Ready-to-use and easy-to-apply formula Suitable for regular vehicle care and professional detailing Part of the 3D GLW Series Contents: 473 ml Tire cleaner for dirt and old tire care residue A clean tire sidewall is the foundation for an even and long-lasting tire dressing. The 3D GLW Tire Cleaner helps dissolve deeply embedded road grime and residue from previous tire care applications. Cleaning can be further supported with a suitable tire brush. The result is a clean tire surface that can then be optimally treated with 3D Tire Shine or another tire care product. Wheel cleaner for regular vehicle care The 3D GLW Wheel & Tire Cleaner also delivers excellent cleaning performance on wheels. Brake dust, road grime, and typical dirt from daily driving can be effectively loosened and then rinsed away. This makes the cleaner ideal for regular wheel cleaning during vehicle washing. How to use 3D GLW Wheel & Tire Cleaner correctly Spray the cleaner onto the cool and preferably dry surfaces of the tires and wheels and allow it to dwell briefly. If necessary, agitate the loosened dirt with a suitable wheel brush or tire brush. Then rinse thoroughly with water. Do not use the product on hot surfaces and do not allow it to dry. For sensitive or unknown wheel surfaces, testing the product on an inconspicuous area before full application is recommended. One cleaner for tires and wheels With the 3D GLW Wheel & Tire Cleaner, wheel cleaning can be easily integrated into regular vehicle washing. Combining wheel cleaner and tire cleaner saves an additional step while creating the ideal foundation for subsequent tire dressing. A practical solution for detailers and car care enthusiasts who want to clean tires and wheels thoroughly and efficiently.

3D Poxy Montan Wax Gloss Sealant 236 ml – intense depth of gloss and paint protection 3D Poxy Montan Wax 236 ml is a high-quality gloss sealant with montan wax for an especially rich depth of gloss and a smooth, well-maintained paint surface. The combination of montan wax and modern polymer technology creates an intense finish while protecting the vehicle paint from everyday environmental influences. 3D Poxy is ideal as the final step after paint correction and brings an impressive wet look to the fore, particularly on dark paint colors. High-quality montan wax with polymer technology Creates an intense depth of gloss and pronounced wet look Provides a smooth and visibly enhanced paint surface Ideal as a finishing step after polishing Particularly impressive appearance on dark paint colors Protects the paint from everyday environmental influences Easy to apply by hand or with a polishing machine For professional vehicle detailing and demanding car care Contents: 236 ml Montan wax for exceptional depth of gloss The special feature of 3D Poxy is the use of montan wax. This high-quality wax supports a rich, deep and reflective paint finish. Combined with polymer technology, it creates a surface that not only looks glossy but also feels pleasantly smooth. Anyone looking to bring out even more visual depth in their vehicle's paint after polishing will find 3D Poxy to be an ideal finishing product for detailing. Gloss sealant for dark and light automotive paint 3D Poxy can be used on a variety of paint colors and provides a noticeable enhancement of gloss and color depth. The characteristic wet look is particularly impressive on black, gray, red and other dark paints. However, light and metallic paints also benefit from the smooth surface and intense reflections of the gloss sealant. 3D Poxy after paint polishing For optimum results, the vehicle paint should be thoroughly washed and polished if necessary before application. Then apply 3D Poxy Montan Wax sparingly and evenly to the clean, cool paint surface. The product can be applied by hand with a soft applicator or by machine with a suitable finishing pad. After the recommended curing time, polish off the residue with a clean, soft microfiber towel. 3D Poxy for show-car gloss and well-maintained paint Whether as the finishing touch to an extensive paint correction or for regularly enhancing a well-maintained vehicle: 3D Poxy Montan Wax Gloss Sealant is intended for users who place particular value on gloss, color depth and a high-quality finish. The combination of montan wax, polymer technology and easy application makes 3D Poxy an interesting alternative to traditional car waxes and synthetic paint sealants.

3D Tire Shine Tire Dressing 473 ml – rich shine for well-maintained tires 3D Tire Shine Tire Dressing 473 ml gives vehicle tires a rich, well-maintained finish and visibly enhances the overall appearance of the vehicle. The ready-to-use tire dressing was developed to make faded and dull tire sidewalls look dark and even again. Depending on the application and desired result, the finish can range from a refined look to a more intense tire shine. Ideal for professional vehicle detailing, show cars, or regular car care. Tire dressing for a rich and well-maintained finish Visually refreshes dull and faded tire sidewalls Creates a dark, even tire appearance Shine level can be influenced by the amount of product applied Quick and easy application Ready-to-use formulation Ideal for professional vehicle detailing and private car care Contents: 473 ml Tire dressing for a deep black look Clean and well-maintained tires provide the perfect finishing touch after washing a vehicle. 3D Tire Shine visually refreshes tire sidewalls and gives them a noticeably darker, richer appearance. This creates an attractive contrast between the tires, wheels, and vehicle paintwork. High-quality tire dressing can significantly improve the overall appearance of vehicles with previously gray or faded tires. Adjust the tire shine to your preference With 3D Tire Shine, the finish can be adjusted to suit personal preferences. For a more subtle, well-maintained look, apply the tire dressing sparingly and evenly. If a more intense tire shine is preferred, apply a second thin coat after the product has flashed off. This makes 3D Tire Shine suitable for both an elegant detailer look and vehicles where a clearly visible shine is desired. How to use 3D Tire Shine correctly For optimal results, thoroughly clean the tires before application and allow them to dry completely. Then apply 3D Tire Shine sparingly to a suitable tire applicator and distribute it evenly over the tire sidewall. Allow the product sufficient time to flash off and, if necessary, remove excess product with a suitable cloth. For additional shine, apply a second thin coat after the product has flashed off. Use the tire dressing only on the tire sidewalls and avoid contact with the tread and brake components. 3D Tire Shine for professional vehicle care Whether after a regular vehicle wash, before a car meet, or as the final step of a complete detailing process: 3D Tire Shine Tire Dressing provides the decisive finishing touch for tires. Its easy application, rich color enhancement, and adjustable shine make it an appealing choice for anyone who values a thoroughly well-maintained vehicle.

3D Wipe Paint Inspection Spray & Degreaser 473 ml – perfect paint preparation 3D Wipe 473 ml is a professional paint inspection spray and degreaser for thoroughly preparing paint surfaces before applying ceramic coatings, coatings, waxes or other paint protection products. The Surface Prep Cleaner removes polishing oils, grease and other residues from the surface, leaving the paint clean and residue-free. At the same time, 3D Wipe is ideal for paint inspection after polishing, as it removes oily polish residues and makes it easier to assess the actual polishing results. Paint inspection spray and degreaser for professional vehicle detailing Removes polishing oils, grease and unwanted residues from vehicle paint Ideal for paint inspection during and after polishing Optimal preparation for ceramic coatings and coatings Also suitable for preparing surfaces for waxes and other paint protection products Helps create a clean surface for optimal adhesion of paint protection products Ready to use and easy to apply with a microfiber towel Ideal for detailers, professional valeters and demanding car care applications Contents: 473 ml Paint inspection spray after polishing Polishes can leave oils and other residues on the paint that visually affect the actual polishing results. 3D Wipe paint inspection spray can be used to specifically clean and degrease the polished surface. This makes it easier to reliably identify remaining defects, swirls or polishing marks. 3D Wipe is therefore a practical aid for multi-stage polishing work and the final inspection of the paint finish. Degreaser before ceramic coating and coating application Thoroughly cleaning the paint surface is particularly important before applying a ceramic coating. Polishing oils, grease and other residues can impair the bond between the coating and the paint. 3D Wipe therefore serves as the final cleaning step between polishing and paint protection application. It removes unwanted residues from the surface and optimally prepares it for the coating to be applied. How to use 3D Wipe correctly After completing the polishing work, spray 3D Wipe onto the paint surface to be treated or onto a clean microfiber towel and carefully wipe the surface. Then buff away any residue using a clean side or a second microfiber towel. Work section by section and make sure the surface is completely clean and dry before applying a coating. Professional paint preparation with 3D Wipe Whether for paint inspection after polishing or as a degreaser immediately before applying a ceramic coating, 3D Wipe combines two important steps in professional paint preparation. Anyone looking to reliably remove polish residues and create an optimally prepared surface for subsequent paint protection will find the 3D Wipe Surface Prep 473 ml to be a cleaner specifically developed for this purpose.

Ceramic Buff Splitted Light by Detail Passion is the budget-friendly 250 GSM version of the proven Ceramic Buff Splitted, designed specifically as a leveling and polishing cloth for ceramic coatings. The fine, soft microfiber reliably removes excess coating, delivering a clean, controlled finish. Priced at nearly half of the standard version, Ceramic Buff Splitted Light is a highly economical coating cloth for professional detailers and enthusiasts with high cloth consumption. Affordable leveling and coating cloth with 250 GSM Perfect for leveling and polishing ceramic coatings Almost half the price of the Ceramic Buff Splitted standard version 70% polyester and 30% polyamide Ideal for easy-to-apply ceramic coatings Soft microfiber for a clean and even paint finish Leveling Cloth for Ceramic Coatings and Sealants With 250 GSM, Ceramic Buff Splitted Light is lighter than the standard version, making it especially suitable for ceramic coatings that are easier to polish and level, such as NORDIC Graphene 60, Gtechniq GT1, and LUMINUS SP Graphene. When leveling, the microfiber cloth absorbs excess ceramic coating from the paint surface in a controlled way, helping to avoid high spots, streaks, and surplus coating. It can also be used for the final buff off to achieve a clear, uniform paint finish. Ceramic Buff Splitted Light with 250 GSM This premium microfiber is made of 70% polyester and 30% polyamide combining a soft feel with good absorbency. Thanks to the lower weight, Ceramic Buff Splitted Light is an affordable alternative for straightforward ceramic coatings and situations requiring multiple fresh cloths, such as large vehicles or professional use. The price difference to the standard version pays off quickly in such scenarios. Light or Standard Ceramic Buff Splitted? Ceramic Buff Splitted Light is optimized for cost-effective application of coatings and ceramic sealants. For removing polishes and oily residues, we recommend the regular Detail Passion Ceramic Buff Splitted. Its higher material density and stronger absorption make it the better choice. However, if you need a budget-friendly leveling cloth, coating cloth, or polishing cloth for ceramic sealants, Ceramic Buff Splitted Light offers a cost-efficient alternative.

Ceramic Buff Splitted Light by Detail Passion is the budget-friendly 250 GSM version of the proven Ceramic Buff Splitted, specially designed as a leveling and polishing cloth for ceramic coatings. The fine, soft microfiber reliably absorbs excess coating, enabling a clean, controlled finish. Priced at nearly half the cost of the standard version, Ceramic Buff Splitted Light is an especially economical coating cloth for professional detailers and passionate enthusiasts with high towel usage.Affordable leveling and coating cloth with 250 GSMPerfect for leveling and polishing ceramic coatingsAlmost half the price of the standard Ceramic Buff Splitted versionMade of 70% polyester and 30% polyamideIdeal for easy-to-apply ceramic coatingsSoft microfiber for a clean, even paint finishLeveling Cloth for Ceramic Coatings and SealantsAt 250 GSM, Ceramic Buff Splitted Light is lighter than the standard version and especially suited for ceramic coatings that are relatively easy to polish and level. These include products like NORDIC Graphene 60, Gtechniq GT1, and LUMINUS SP Graphene. During leveling, the microfiber cloth absorbs excess ceramic coating from the paint surface in a controlled manner, helping to avoid high spots, streaks, and excess product. It can also be used for the final buff off to achieve a clear, uniform paint finish.Ceramic Buff Splitted Light with 250 GSMThis high-quality microfiber consists of 70% polyester and 30% polyamide, combining a pleasantly soft surface with excellent absorbency. Due to its lighter weight, Ceramic Buff Splitted Light offers an affordable alternative for easy-to-use ceramic coatings and situations where multiple fresh cloths are needed during coating application. Especially for larger vehicles or professional use, the nearly halved price compared to the standard version pays off quickly.Light or Standard Ceramic Buff Splitted?Ceramic Buff Splitted Light is designed for cost-effective processing of coatings and ceramic sealants. For removing polish residues and especially oily deposits, we still recommend the regular Detail Passion Ceramic Buff Splitted. Its higher material density and greater absorbency make the standard version the better choice for these uses. However, if you’re looking for an affordable leveling, coating, or polishing cloth for ceramic coatings, Ceramic Buff Splitted Light offers a cost-effective alternative.

Ceramic Buff Splitted Light by Detail Passion is the affordable 250 GSM version of the proven Ceramic Buff Splitted, specially designed as a leveling and polishing cloth for ceramic coatings. The fine, soft microfiber reliably absorbs excess coating for a clean, controlled finish. At almost half the price of the standard version, Ceramic Buff Splitted Light is an especially economical coating cloth for professional detailers and passionate enthusiasts with high cloth consumption.Affordable leveling and coating cloth with 250 GSMPerfect for leveling and polishing ceramic coatingsAlmost half the price of the Ceramic Buff Splitted standard version70% polyester and 30% polyamideIdeal for easy-to-work-with ceramic coatingsSoft microfiber for a clean and even paint finishLeveling Cloth for Ceramic CoatingsWith 250 GSM, Ceramic Buff Splitted Light is lighter than the standard version and especially suitable for ceramic coatings that are comparatively easy to polish and level. Examples include NORDIC Graphene 60, Gtechniq GT1, and LUMINUS SP Graphene. During leveling, the microfiber cloth absorbs excess ceramic coating from the paint surface in a controlled way, helping to avoid high spots, streaks, and excess coating. It can also be used for the final buff off to achieve a clear, even paint finish.Ceramic Buff Splitted Light with 250 GSMThis high-quality microfiber consists of 70% polyester and 30% polyamide, combining a pleasantly soft surface with good absorption capacity. Thanks to its lower fabric weight, Ceramic Buff Splitted Light is an affordable option for easily applied ceramic coatings and wherever multiple fresh cloths are needed during coating. Especially on larger vehicles or in professional use, the nearly halved price compared to the standard version quickly pays off.Light or Standard Ceramic Buff Splitted?Ceramic Buff Splitted Light is designed for economical processing of coatings and ceramic sealants. For removing polishes and especially oily residues, we still recommend the regular Detail Passion Ceramic Buff Splitted. Its higher material density and stronger absorption make the standard version the better choice for those tasks. If you’re looking for a cost-effective leveling, coating, or polishing cloth for ceramic coatings, Ceramic Buff Splitted Light offers an efficient alternative.

Detail Passion Horsehair Leather Brush for Leather & Synthetic Leather The Detail Passion horsehair leather brush is a high-quality cleaning brush for the gentle yet thorough cleaning of leather and synthetic leather in vehicle interiors. Thanks to its particularly soft horsehair bristles, the leather brush is ideal for sensitive surfaces and helps loosen dirt from pores, grain patterns and fine structures. Its high-quality construction and varnished wooden body make this EU-made brush a durable tool for professional detailers and discerning car care enthusiasts. High-quality leather brush with soft horsehair bristles Ideal for cleaning leather and synthetic leather Gentle on sensitive and textured surfaces Supports thorough cleaning of pores and leather grain High-quality wooden body that is comfortable to hold Made in the EU Ideal for car seats, steering wheels and other leather surfaces For professional vehicle detailing and private car care Soft leather brush for material-friendly cleaning When cleaning sensitive leather surfaces, using the right tool is essential. The fine horsehair bristles of the Detail Passion car leather brush work leather cleaner evenly into the surface and reach deeper structures. This eliminates the need for strong mechanical pressure. The brush is therefore ideal for regularly maintained leather seats as well as more heavily soiled leather and synthetic leather surfaces. Ideal for working in leather cleaner Combined with a high-quality leather cleaner, this leather brush delivers excellent results. It is ideally suited for leather cleaners from Auto Graph, Koch Chemie, SONAX or Cleantle. Apply the cleaner according to the respective manufacturer's instructions, then work it in with the brush using gentle movements. The horsehair bristles support foaming and help loosen dirt from the surface structure. Leather brush for car seats, steering wheels and interiors The Detail Passion leather brush can be used in many areas of the vehicle interior. It is suitable for leather seats, synthetic leather seats, steering wheels, armrests and door panels, among other applications. A brush can be particularly advantageous on grained surfaces compared with cleaning exclusively with a microfiber cloth, as the fine bristles reach recesses more effectively. How to use the leather brush Remove loose dust and coarse dirt before cleaning the leather. Then use a suitable leather cleaner according to the manufacturer's instructions and carefully work it in with the horsehair leather brush, without applying strong pressure. Afterwards, remove the loosened dirt with a clean microfiber cloth. For particularly sensitive or unknown materials, testing the product beforehand in an inconspicuous area is recommended. High-quality leather brush for professional car care With its combination of soft horsehair, high-quality construction and EU production, the Detail Passion leather brush is an excellent choice for regular leather care. It enables controlled, material-friendly cleaning and perfectly complements high-quality leather cleaners. Anyone looking for a durable leather brush for cars, leather seats and synthetic leather will find a professional vehicle care tool here.

FLEX XFE 2 21 18-EC C – Cordless Random Orbital Polisher with 21 mm OrbitThe FLEX XFE 2 21 18-EC C is a powerful 18 V cordless random orbital polisher for demanding paint correction and professional vehicle detailing. With its particularly large 21 mm polishing orbit, it enables fast work progress and shows its strengths especially on larger vehicle surfaces. It combines high correction performance with the safe and controlled polishing behavior of a free-spinning random orbital polisher – completely cordless.21 mm polishing orbit for high material removal and fast work progressFree-spinning random orbital movement for controlled polishing18 V battery operation for maximum freedom of movementHigh performance throughout the entire battery runtimeBrushless motor with high efficiency and performanceCDC constant electronics to prevent unwanted speed fluctuationsIdeal for everything from defect correction to high-gloss finishingErgonomic soft-grip areas and an especially flat gear head21 mm orbit for significantly faster work progressThe centerpiece of the FLEX XFE 2 21 18-EC C is its large 21 mm random orbital orbit. Compared with a conventional 15 mm random orbital polisher, the polishing pad moves along a significantly larger oscillation circle. This allows faster work, particularly on large surfaces, and enables high paint removal when the appropriate pad and polish combination is used.This makes the XFE 2 21 particularly suitable for bonnets, vehicle roofs, doors and other large body areas. Depending on the polishing pad and polish used, the application range extends from removing heavier paint defects and deeper scratches to achieving a high-gloss finish.125 mm or 150 mm – especially flexible backing plate optionsA major advantage for vehicle detailing is the flexibility when choosing the backing plate. The FLEX XFE 2 21 18-EC C is designed for a maximum backing plate size of 150 mm and can also be used with a 125 mm backing plate. This allows the powerful 21 mm orbit to be combined with the particularly common 125 mm plate format.The 150 mm backing plate prioritizes maximum surface coverage. The 125 mm backing plate, on the other hand, makes the machine more versatile and allows the use of more compact polishing pads. This combination is particularly interesting for professional detailers: 21 mm orbit for fast paint removal combined with the handy and universal pad size of a 125 mm backing plate.As powerful as a corded polisher – just without the cordFLEX has designed the XFE 2 21 18-EC C to deliver its high performance throughout the entire battery runtime. The integrated CDC constant electronics prevent disruptive speed fluctuations and ensure consistent operation. This allows the machine to be guided over the paint in a controlled manner even during longer polishing sessions.Trigger switch for slow and sensitive start-upLock-on function for convenient continuous operationSpeed selector wheel accessible from both sides, with detentsSoft start for a controlled start of workRestart protectionTemperature monitoring and overload protectionElectronic Management System (EMS)LED indicator for battery capacityNew brushless motor and high-performance gearboxThe machine features a new generation of brushless FLEX motors with high efficiency and performance. The motor is complemented by a newly developed high-performance gearbox designed to minimize noise and vibration. This is particularly noticeable during longer polishing jobs and supports precise machine control.An integrated magnetic solution additionally stabilizes the backing plate rotation and prevents the polishing plate from continuing to run unnecessarily for too long. As a result, the machine remains controlled when being set down and repositioned and can be used comfortably in professional everyday work.Guide the machine ergonomically and with control over the paintThe XFE 2 21 was also adapted to the requirements of professional vehicle detailing in terms of handling. Ergonomically shaped soft-grip areas enable secure guidance, while the extremely flat gear head reduces the distance between the hand and the paint surface. This allows the machine to be guided in a controlled manner in different working positions.A rubberized resting surface also allows the polishing machine to be placed down securely during work – a small but extremely practical detail in everyday use.FLEX 18 V battery systemThe FLEX XFE 2 21 18-EC C is part of the FLEX 18 V battery system and can be operated with all compatible FLEX 18 V battery packs. If you already own other FLEX 18 V machines, you can also use existing batteries for the polishing machine. The XFE 2 21 18-EC C version is supplied without a battery and without a charger.Technical data FLEX XFE 2 21 18-EC CWith a 21 mm orbit, a wide adjustable speed range and a powerful 18 V drive, the FLEX XFE 2 21 18-EC C provides the technical prerequisites for efficient paint correction from cutting to finishing.Battery voltage: 18 VPolishing principle: Free-spinning random orbitalPolishing orbit: 21 mmMax. backing plate size: 150 mmNo-load speed: 1,350–4,350 rpmNo-load orbit rate: 2,700–8,700 orbits/minDimensions L x W x H: 388 x 125 x 126 mmWeight without battery pack: 2.4 kgMotor: brushlessOrder number: 534999EAN: 4030293288393Scope of deliveryThe version with order number 534999 is the solo version of the cordless polishing machine. It is therefore particularly suitable for users who already own batteries and chargers from the FLEX 18 V system.1x FLEX XFE 2 21 18-EC C cordless random orbital polisher1x special damped hook-and-loop backing plateSupplied without batterySupplied without chargerIdeal for professional paint correction and vehicle detailingThe FLEX XFE 2 21 18-EC C is particularly appealing to vehicle detailers and demanding enthusiasts looking for a powerful random orbital polisher with a large orbit. The combination of 21 mm orbit, powerful 18 V drive and cordless freedom of movement enables fast work progress without sacrificing the advantages of a free-spinning random orbital polisher.The machine is particularly interesting for users who have previously worked with a 15 mm random orbital polisher and want greater work progress and correction performance on larger surfaces. Thanks to the additional option of using a 125 mm backing plate, the XFE 2 21 remains remarkably versatile. It is therefore a strong choice for efficient cutting, one-step polishing and demanding finishing work.

FLEX XFE 2 21 18-EC Set – Cordless Random Orbital Polisher with 21 mm Orbit The FLEX XFE 2 21 18-EC Set is the powerful complete solution for professional vehicle detailing and demanding paint correction. The free-spinning cordless random orbital polisher combines an exceptionally large 21 mm polishing orbit with a powerful 18 V battery drive, enabling rapid work progress – especially on large painted surfaces. The set already includes 2 FLEX 18 V batteries and a fast charger, making the machine ready for immediate use. 21 mm polishing orbit for high material removal and rapid work progress Complete set with 2 batteries and fast charger Powerful 18 V battery drive without a disruptive cable Free-spinning random orbital motion for controlled paint correction Maximum backing pad size of 150 mm Ideal for large vehicle surfaces and efficient defect correction Brushless motor with high efficiency and performance Suitable for everything from stronger cutting to a high-gloss finish 21 mm orbit – more material removal and faster work progress The particularly large 21 mm random orbital stroke is one of the key advantages of the FLEX XFE 2 21 18-EC. Compared with a typical 15 mm random orbital polisher, the polishing pad describes a larger oscillation circle. This allows efficient work, particularly on large surfaces, and a high degree of correction when the pad and polish are suitably combined. Hoods, roofs, doors and larger side panels can be processed particularly efficiently with the 21 mm orbit. FLEX has designed the machine for a wide range of applications – from removing deeper scratches to finishing. The XFE 2 21 is therefore suitable for intensive paint correction as well as one-step applications and multi-stage polishing processes. Ideal for 125 mm and 150 mm backing pads The flexibility of the backing pad is particularly interesting for professional vehicle detailers. The XFE 2 21 is designed for a maximum backing pad size of 150 mm, but can also be combined excellently with a 125 mm backing pad. This makes it possible to use the high material removal of the 21 mm orbit with the particularly common and easy-to-handle 125 mm format. With a 150 mm backing pad, maximum surface performance is the priority. The 125 mm backing pad, on the other hand, enables the use of more compact polishing pads and makes the machine even more versatile. The combination of a 21 mm orbit and 125 mm backing pad is particularly attractive for detailers who want rapid work progress without giving up the universal 125 mm pad format. Complete set with 2 batteries and fast charger Unlike the bare-tool version, the FLEX XFE 2 21 18-EC is supplied in this configuration as a complete cordless set. In addition to the polishing machine, the scope of delivery includes two FLEX 18 V Li-ion battery packs and the corresponding 12/18 V fast charger. This makes the set particularly suitable for users who are new to the FLEX 18 V system or are looking for a fully equipped polishing solution. 2x FLEX Li-ion battery pack 18 V 1x FLEX fast charger 12/18 V 1x damped special hook-and-loop backing pad Machine, batteries and charger in one set Ideal for getting started directly with the FLEX 18 V battery system As powerful as a corded polisher The XFE 2 21 18-EC was developed to deliver high performance throughout the entire battery runtime. The CDC constant electronics counteract unwanted speed fluctuations and thereby support consistent polishing performance. This is particularly important for demanding correction work, where constant machine performance ensures reproducible results. CDC constant electronics for consistent performance Trigger switch for a slow and controlled start Locking function for convenient continuous operation Speed selector wheel accessible from both sides, with detents Soft start and restart protection Temperature monitoring and overload protection Electronic Management System to protect the machine LED display for battery capacity Brushless motor and smooth-running high-performance gearbox The new generation of brushless FLEX motors offers high efficiency and performance. It is complemented by a newly developed high-performance gearbox designed to keep noise and vibration as low as possible. During longer polishing jobs in particular, the smooth machine operation improves user comfort and makes it easier to guide the machine in a controlled manner across the paint. An integrated magnetic solution additionally stabilizes pad rotation and prevents the polishing pad from running on unnecessarily long. This ensures controlled machine behavior when setting it down and supports comfortable handling in professional everyday use. Ergonomic handling for long polishing jobs Ergonomically shaped soft-grip areas enable secure and precise machine guidance. The particularly flat gearbox head reduces the distance between the hand and the paint surface, allowing the XFE 2 21 to be guided in a controlled manner in different working positions. A rubberized resting surface allows the polishing machine to be placed down safely during work. Together with the cordless design, this creates a machine that enables particularly comfortable and unrestricted work on larger vehicles. FLEX 18 V battery system The XFE 2 21 18-EC belongs to the FLEX 18 V battery system and can be operated with FLEX 18 V battery packs. This is particularly practical for users who already use other compatible FLEX cordless tools. The batteries included in the set can therefore also be used within the corresponding FLEX 18 V system. Technical data FLEX XFE 2 21 18-EC Set With its large 21 mm orbit, powerful battery drive and wide adjustable speed range, the FLEX XFE 2 21 18-EC offers ideal conditions for efficient professional vehicle detailing. Battery voltage: 18 V Polishing principle: Free-spinning random orbital Polishing orbit: 21 mm Max. backing pad size: 150 mm No-load speed: 1,350–4,350 rpm No-load stroke rate: 2,700–8,700 strokes/min Number of batteries supplied: 2 Charger included: Yes Dimensions L x W x H: 388 x 125 x 126 mm Weight without battery pack: 2.4 kg Order number: 535000 EAN: 4030293288409 Scope of delivery The FLEX XFE 2 21 18-EC Set includes the polishing machine and the essential components for cordless operation, providing a complete basis for immediate use. 1x FLEX XFE 2 21 18-EC cordless random orbital polisher 1x special damped hook-and-loop backing pad 2x FLEX Li-ion battery pack 18 V 1x FLEX fast charger 12/18 V For professional vehicle detailers and demanding enthusiasts The FLEX XFE 2 21 18-EC Set is particularly suitable for users looking for a powerful cordless random orbital polisher with a large orbit and requiring a complete battery package straight away. The 21 mm orbit ensures rapid work progress, especially on large painted surfaces, and provides a significantly larger pad movement range than machines with a smaller orbit. The combination of high correction performance, free-spinning random orbital motion, brushless motor and cordless 18 V drive makes the XFE 2 21 a versatile machine for cutting, one-step polishing and high-gloss finishing. With the two included batteries and fast charger, this set is the complete solution for anyone who wants to start professional paint correction directly with the new FLEX XFE 2 21.