DP Pro Therminator 30mm Polishing Pads 3pcs Set Super Heavy Cut White Ø 35/45mm

3D ACA X-TRA 500 is an innovative cutting polish designed for HeavyCut and MediumCut applications. Known as 3D 500, this polish is produced by 3D Products in the USA. With 3D 500, paint defect corrections can be made in no time. The product contains advanced "Alpha Ceramic Alumina" polishing particles that allow for significantly longer working time. 3D 500 is suitable for both soft single-layer paints and hard clear coats. It is free from fillers and can be completely removed even with mild paint degreasers. High Cut and Gloss Level with 3D ACA X-TRA 500 3D 500 can be applied using rotary or eccentric machines, leaving a very glossy finish for a HeavyCut polish without hazing. Ideally, 3D 500 is used before a finishing polish such as 3D ACA X-TRA 520, 3D One Hybrid, or any comparable polish. 3D ACA 500 becomes clear after a short working time, allowing a good view of the paint surface. 3D 500 is characterized by a very long working time and is economical due to the late breaking down of the polishing particles into smaller particles. Easy to Use: 3D ACA X-TRA 500 3D 500 is solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 500 does not create dust and can be easily wiped off. It is recommended to use 3D sparingly to avoid any excess. We recommend using microfiber pads, wool pads, and hard to medium-hard foam pads with 3D. Due to its high viscosity, 3D 500 does not splash even at high RPMs.

3D ACA X-TRA 510 is a cutting-edge paint polish designed for Heavy Cut applications. This polish can be used with both rotary and dual-action polishers. As known from other 3D polishes, it has an extended working time. It works faster than the 3D 500 on severe paint defects. 3D 510 contains innovative 'Alpha Ceramic Alumina' abrasive particles, allowing for a significantly longer processing time. It is suitable for both soft single-layer paints and hard clear coats. 3D 510 is free from fillers and can be completely removed even with gentle paint degreasers. High Material Removal in No Time with 3D ACA X-TRA 510 3D 510 can be used both excentrically and rotationally, leaving a gloss finish typical for Heavy Cut polishes without dulling. Ideally, 3D 510 is used before a finishing polish like the 3D ACA X-TRA 520, 3D One Hybrid, or a comparable product. 3D ACA 510 becomes clear after a short processing time, allowing for good visibility on the paint. It features a very long working time and is economical due to the late breakdown of the abrasive particles into smaller fragments. Very Easy Application: 3D ACA X-TRA 510 3D 510 is solvent-free, kerosene-free, and filler-free. Despite its eco-friendly and user-friendly formulation, 3D 510 does not produce dust and can be easily wiped off. It is advisable to use 3D sparingly to avoid excess. We recommend using it with microfiber pads, wool pads, and hard to medium-soft foam pads. Thanks to its high viscosity, 3D 510 does not spray even at high RPMs.

Polishing pads are key to achieving top-tier detailing results – they directly transfer the machine's power onto the paint and are crucial for a flawless finish. Over time, polish residues, oils, and dust penetrate deep into the fibers, leading to reduced performance, uneven results, and premature pad replacement. The cleaning powder from Lake Country offers an effective yet gentle solution for deep, material-friendly, and sustainable cleaning of premium polishing pads.Compatible with All Premium Pads – Tested for Hook & Loop SafetyWhether from Detail Passion, Lake Country, Rupes, Sonax, ServFaces, Buff and Shine, or other top brands, this cleaning powder is crafted for professional use and ideal for foam, microfiber, hybrid, and wool pads. Extensive testing proves it removes even deeply embedded residues while preserving the hook & loop fasteners that inferior cleaners often damage.Optimal Performance with Lake Country Pad WasherFor maximum cleaning depth, use the powder in the Lake Country Pad Washer. The combo of mechanical action and chemical cleaning eliminates stubborn residues more thoroughly and gently than any washing machine. Perfect for all pad types – from delicate wool to durable hybrid materials – ensuring your pads maintain peak performance over time.Efficient, Material-Friendly & Eco-ConsciousJust 20 grams of powder per 10 liters of warm water creates the cleaning solution. Soak pads immediately after use for at least 15 minutes, then rinse thoroughly. For heavily soiled pads, extend soaking time. Free from solvents and fully biodegradable, this cleaner merges professional effectiveness with sustainability – ideal for those who want to clean and preserve their pads.

Innovative machine polish for quickly restoring heavily weathered paints, eliminating deep scratches, and effectively removing paint fogs and sanding marks up to 1,200 grit. Thanks to the extremely homogeneous abrasive grain, Heavy Cut 9.02 achieves an exceptionally high cut while providing excellent gloss. It can be polished for an extended period with minimal dust and splatter without burning in and is easy to wipe off. Perfect for all paint types (both soft and scratch-resistant). Abrasiveness: 9.0, Gloss Grade: 6.0 Strong abrasive polish for rotary and dual-action applications Suitable for all paint types Low dust and splatter

Highly abrasive cutting paste that removes scratches and inclusions from repaired or original factory paintwork. Leaves minimal processing marks and almost no polishing residues. Easy to use. High material removal with minimal matting. Removes sanding marks from P1000 sandpaper. Strong cutting polish for rotary and eccentric use Removes sanding marks up to P1000 and finer Ideal for severe paint defects Minimal matting with maximum removal

Highly effective grinding polish for high process speeds, contains pure, extremely hard aluminum oxide. Even faster, large processing window. Removes scratches up to P800. Extreme, fast-cutting polish for rotary and eccentric use Removes scratches up to P800 and finer Ideal for severe paint defects Large processing window

AETERNO Zenit Pro All-in-One Polish & Sealant – Perfect Paint Care in One Step Powerful paint polish and long-lasting protection combined – the AETERNO Zenit Pro All-in-One Polish & Sealant blends strong cutting agents with a protective sealant. Designed for used car detailing, delicate paint care, or as the perfect wax prep, this innovative polish delivers a flawless finish with brilliant depth. Despite its high cut, it provides exceptional finish quality, creating an incredible clear shine with intense light reflection even on light paints. At the same time, it leaves a durable protective layer that guards the paint against environmental damage. All-in-One Formula: Polish and sealant combined for efficient paint correction. High Cut with Finish Character: Visible defect removal with a brilliant surface. Outstanding Shine on Light Paints: Crystal-clear reflection and striking depth effect. Perfect for Delicate Paints & Classics: Gentle abrasives prevent unnecessary paint removal. Ideal for Used Car Detailing: Removes light scratches, holograms, and boosts gloss. Prepares for Waxes or Solo Protection: Leaves a long-lasting protective layer. Easy Wipe-Off: Polishes out quickly without greasy residues. Silicone-Free: Safe for paint shops and professional use. Gentle Paint Correction with Protective Function AETERNO Zenit Pro All-in-One Polish & Sealant is ideal for sensitive paints and classic cars needing gentle polishing. Modern abrasives deliver high correction with an exceptionally fine finish. Even on sensitive or light uni and metallic paints, it creates an even, hologram-free gloss with impressive clarity. The built-in sealant also forms a protective barrier against dirt, UV rays, and environmental impacts. Optimal Performance with Large-Throw Polishers & Premium Pads The polish unfolds its full potential especially on large-throw dual action polishers from 12mm stroke. Paired with specially designed pads like the Detail Passion Therminator+ or Lake Country HDO Pads, it achieves an impressive balance of defect correction and high-gloss finish. Efficient force transfer of modern large-throw machines speeds up work while the matched pad structure ensures crystal-clear, even surface results. Versatile Use & Effortless Application Perfect for used car detailing, as a fast one-step polish, or finishing well-maintained paints – this product offers maximum flexibility. Its silicone-free formula makes it ideal for paint shops as well. The easy wipe-off behavior simplifies work and leaves a streak-free, clear result with visible gloss boost. Protection and Shine in One Step Thanks to the integrated sealant, AETERNO Zenit Pro All-in-One Polish & Sealant can be used as sole protection or as a base for waxes and additional sealants. The protective layer preserves the paint from external influences and ensures a long-lasting, smooth surface with excellent depth and stunning light reflection.