Product information "Meguiars DA Microfiber Correction Polish 473ml"
The innovative Meguiars DA Microfiber Correction Compound is specifically designed for use with dual action polishers. This heavy cut polish effectively removes light to moderate wash marks, paint defects, and swirls from modern paints using microfiber pads. For optimal results, it is recommended to use microfiber pads from Detail Passion, Lake Country, or Meguiars. To achieve the highest gloss, a finishing polish such as Meguiars M210 is advised after defect correction.
Meguiars DA Microfiber Correction Compound for Microfiber Pads
Super-Micro Abrasive Technology for removing moderate damage
Delivers an impressive gloss finish
Works best with microfiber pads
Fast and effective
Low dust production
High efficiency and cost-effectiveness
Specifically developed for use with dual action polishers
Properties "Meguiars DA Microfiber Correction Polish 473ml"
Aeterno Zenit Pro Cut Compound – High-Performance Paint Polish from Italy An ideal paint polish requires utmost precision, efficiency, and material compatibility. Aeterno Zenit Pro Cut Compound, made in Italy, combines cutting-edge abrasives technology with an innovative water-based formula. This ensures maximum performance without excessive dust generation or overly dry working behavior. The advanced composition allows for quick and effective defect correction on various paint surfaces – from freshly painted areas to heavily weathered finishes. High-Performance Paint Polish from Italy: Designed for maximum precision and efficiency. Effective Defect Correction: Removes scratches, sanding marks, and oxidation. Suitable for Fresh & Weathered Paints: Gentle on new paint, tough on weathering. Water-Based Formula: Smooth working without excessive dust production. Applicable Rotational & Eccentric: Perfect for various polishing machines. Especially Economical Consumption: Efficient use with minimal product waste. Leaves a Clean, Hologram-Free Finish: Perfect clarity and depth of gloss. Precise Defect Correction & High-Gloss Finish Aeterno Zenit Pro Cut Compound reliably removes sanding marks, scratches, and oxidation without straining the surface. Thanks to its uniform particle structure, the removal is controlled, leaving a clean, hologram-free surface. Particularly on fresh clear coats, the fine abrasive action ensures safe correction of dust inclusions or orange peel. Heavily weathered paints benefit from deep cleaning that removes old oxidation and restores the paint's shine. Maximum Efficiency & Versatility The powerful car polish has been specially developed for professional use and offers maximum flexibility. Aeterno Zenit Pro Cut Compound can be processed with both rotary and eccentric machines, adapting the product ideally to different working styles. The water-based formula allows for smooth polishing behavior without excessive dusting or quick drying times. Additionally, the particularly economical consumption ensures efficient and cost-saving application. Tested Quality & Professional Experience For several months, Aeterno Zenit Pro Cut Compound was intensively tested at the Kießling Painting Center, one of the leading painting companies in Southern Germany. The results confirmed the exceptional performance on a wide range of painted surfaces.
3D ACA X-TRA 500 is an innovative paint polish designed for HeavyCut and MediumCut applications. Known as 3D 500, this polish is manufactured by 3D Products in the USA. With 3D 500, paint defect corrections can be executed in a very short time. 3D 500 contains innovative "Alpha Ceramic Alumina" polishing agents that allow for a significantly longer working time. It is suitable for both soft single-layer paints as well as hard clear coats. 3D 500 is free from fillers and can be completely removed even with mild paint degreasers. High Cut and High Gloss with 3D ACA X-TRA 500 3D 500 can be used both eccentrically and rotationally, leaving a very shiny finish typical of a HeavyCut polish without hazing. Ideally, 3D 500 should be used before a finishing polish like the 3D ACA X-TRA 520, 3D One Hybrid, or a comparable polish. 3D ACA 500 becomes clear after a short working time, allowing for good visibility on the paint. 3D 500 is characterized by a very long working time and is economically viable due to the late breakdown of the polishing agents into small particles. Very Easy Application: 3D ACA X-TRA 500 3D 500 is solvent-free, kerosene-free, and free from fillers. Despite its eco-friendly and user-friendly formulation, 3D 500 does not produce dust, making it easy to wipe off. It should be used sparingly to avoid excess. We recommend using 3D with microfiber pads, wool pads, and hard to medium-soft foam pads. Thanks to its high viscosity, 3D 500 does not splash even at high RPMs.
With an intensified presence in Europe, the US manufacturer Dynabrade has updated its appearance in some areas. This includes the DynaRed polish, which has been popular in Germany for years. The DynaRed is now known as DynaOne, featuring the same formula. It's great to see that this polish, applicable to clear coat, paint, gel coats, and more, is now available in a convenient 250ml size. Dynabrade DynaOne Heavy Cut polish with One Step Finish High & fast material removal on clear coat, paint, gel coats Suitable for microfiber, lambswool, and foam pads Can be used both eccentrically and rotatively Free from fillers and silicon Water-based formula As a heavy cut polish, the DynaOne can remove scratches starting from P1500. In practice, removal rates are significantly higher with rotary usage combined with microfiber or lamb pads, making it possible to eliminate P1000 scratches. Despite its powerful cutting performance, the DynaOne can achieve a perfect finish. Since this polish delivers excellent results on car paints as well as on boat, caravan, and aircraft finishes, it is a must-have for both professionals and occasional detailers.
Meguiars Detailer DA Microfiber Finishing Wax is a triple-action product designed for freshly prepared vehicle paints. It combines high-gloss finishing polish, wax, and sealant. Ideally, the DA Microfiber Finishing Wax is applied to paint surfaces polished with Meguiars DA Microfiber Correction Compound. It is recommended to use Microfiber Finishing Pads for application. Polymers, silicone, and Carnauba waxes are the key components of Microfiber Finishing Wax, delivering even higher gloss and protection than the individual components might suggest. Key features of Meguiars DA Microfiber Finishing Wax:rich formula of polymers, silicones & Carnauba waxesimpressive high glossvery good long-lasting protectionno streakingeasy wiping off without reworkideal as a follow-up product to DA Microfiber Correction Compoundapplication with Microfiber Finishing Disc DMFspecifically developed for use with dual-action polishers
Meguiars DA Microfiber Cutting Discs are high-efficiency microfiber polishing pads with a foam interface. While they may seem pricey at first glance, their extreme durability and quick defect correction make them favorites among detailers, enthusiasts, and in the fast auto detailing segment. Meguiars designed these pads specifically for use with the high-performance polish DA Correction Compound, but they also work excellently with other heavy cut polishes like effectum Blue Cut or 3D ACA 510 and 3D ACA 500. Pressure-Free Removal of Severe Paint Defects Exceptional cutting performance Great results in a very short time, making them highly efficient Low vibration during pressure-free operation Microfiber pad with foam interface Ideal heat dissipation Available for 75mm, 125mm, and 150mm backing plates
Meguiars M210 Mirror Glaze Ultra Pro Finishing Polish is the next level of finishing polishes. Even on sensitive paints, this polish delivers amazing results with excellent finishes. The completely new formula is specially designed for professional detailing and reconditioning needs, quickly removing light paint defects such as haze and swirls, leaving a completely haze-free, hologram-free finish. The polishing oils provide a deep, glossy, and brilliant finish, even on dark and sensitive paints. The polish is silicone-free and easy to remove. M210 can be applied both by hand and with dual-action or rotary polishers. Ultra Pro Speed Polish can be used as a last-step polish after utilizing Meguiars M110 Mirror Glaze Ultra Pro Speed Compound or any other polish. Outstanding finish with incredible gloss level. Creates a deep, glossy finish without swirls or holograms. Designed to remove DA haze or rotary swirls and leave a flawless finish. Easy removal, virtually dust and streak-free. Developed for a flawless finish after Meguiars M110 Ultra Pro Speed Compound, even on dark and sensitive paints.
Designed and produced in the USA, the Detail Passion team has brought the hottest innovation to the table with the "Angry Red Lake Pad". This new Hybrid Wool Pad is characterized by its aggressive cutting power while also delivering a high gloss finish. It features a robust Velcro backing, a heat-resistant and cooling pre-polymer foam interface, followed by a blend of 100% lambswool and infused nano-polyester foam. This heat-resistant high-performance polishing pad can be used with rotary, random orbital, and forced-rotation polishing machines. Unmatched Performance for Professional Polishing of Modern Automotive Paints The blue foam interface is approximately 9mm high, with the Hybrid Wool layer around 6mm. Therefore, the total height is 15mm. The materials used are resistant to solvents, providing maximum durability and strength. It is perfectly suited for high-performance polishers such as Flex, Rupes, or ShineMate. From Quick One Step to Orange Peel Removal: The Purple Hybrid Wool Pad Typical applications for the Hybrid Wool "Angry Red Lake Pad" include fast cutting and removal of severe paint defects, one-step polishing, and orange peel removal. The pad is ideal for use with free-running orbital polishers like the Rupes LHR15 Mark series, Flex XFE series, or forced-rotation machines like the Flex XCE or Rupes LK900 Mille. Using it with rotary polishers enhances material removal and allows for the elimination of orange peel. The stable hybrid wool structure ensures that no energy is lost through fluttering fibers, especially when using orbital polishers. The pad is compatible with all modern polishes from brands like Sonax, Meguiars, Koch Chemie, 3D, and Effectum. Available for 75mm and 125mm Backing Plates Detail Passion manufactures the DP Pro Polishing Pad to specifications and under strict supervision in the USA. The US manufacturer holds a patent on the blend and manufacturing process of lambswool and infused foam. The pad is available for both 75mm and 125mm backing plates. The 125mm version features a center hole for easier placement and enhanced cooling. Polishing pad for maximum material removal and high gloss finish Unmatched fast polishing of automotive paints Highly efficient paint defect correction, one-step to orange peel removal Perfect for Rupes, Flex, and ShineMate polishers Suitable for free-running orbital, forced-rotation, and rotary polishers Designed for extreme durability Resistant to solvents and heat Tear-resistant and shape-stable For 75mm and 125mm backing plates Fiber height approx. 6mm, foam interface pad approx. 9mm, total height approx. 15mm Availability and Additional Information The "Angry Red Lake Pad" is expected to arrive between late February and March 2022. Feel free to use the notification feature. We cannot confirm or deny whether the Hybrid Wool is identical to similarly appearing pads. We will release an application video in January.
€14.90*
Manufacturer / Responsible Person:
3M Deutschland GmbH, Carl-Schurz-Str. 1 , 41453 Neuss DE, Innovation.de@3M.com