DP Pro Polishing Pad 150mm Therminator Super Heavy Cut White 20mm Ø 150/160mm

Aeterno Zenit Pro Cut Compound – High-Performance Paint Polish from Italy An ideal paint polish requires utmost precision, efficiency, and material compatibility. Aeterno Zenit Pro Cut Compound, made in Italy, combines cutting-edge abrasives technology with an innovative water-based formula. This ensures maximum performance without excessive dust generation or overly dry working behavior. The advanced composition allows for quick and effective defect correction on various paint surfaces – from freshly painted areas to heavily weathered finishes. High-Performance Paint Polish from Italy: Designed for maximum precision and efficiency. Effective Defect Correction: Removes scratches, sanding marks, and oxidation. Suitable for Fresh & Weathered Paints: Gentle on new paint, tough on weathering. Water-Based Formula: Smooth working without excessive dust production. Applicable Rotational & Eccentric: Perfect for various polishing machines. Especially Economical Consumption: Efficient use with minimal product waste. Leaves a Clean, Hologram-Free Finish: Perfect clarity and depth of gloss. Precise Defect Correction & High-Gloss Finish Aeterno Zenit Pro Cut Compound reliably removes sanding marks, scratches, and oxidation without straining the surface. Thanks to its uniform particle structure, the removal is controlled, leaving a clean, hologram-free surface. Particularly on fresh clear coats, the fine abrasive action ensures safe correction of dust inclusions or orange peel. Heavily weathered paints benefit from deep cleaning that removes old oxidation and restores the paint's shine. Maximum Efficiency & Versatility The powerful car polish has been specially developed for professional use and offers maximum flexibility. Aeterno Zenit Pro Cut Compound can be processed with both rotary and eccentric machines, adapting the product ideally to different working styles. The water-based formula allows for smooth polishing behavior without excessive dusting or quick drying times. Additionally, the particularly economical consumption ensures efficient and cost-saving application. Tested Quality & Professional Experience For several months, Aeterno Zenit Pro Cut Compound was intensively tested at the Kießling Painting Center, one of the leading painting companies in Southern Germany. The results confirmed the exceptional performance on a wide range of painted surfaces.

3D ACA X-TRA 500 is an innovative cutting polish designed for HeavyCut and MediumCut applications. Known as 3D 500, this polish is produced by 3D Products in the USA. With 3D 500, paint defect corrections can be made in no time. The product contains advanced "Alpha Ceramic Alumina" polishing particles that allow for significantly longer working time. 3D 500 is suitable for both soft single-layer paints and hard clear coats. It is free from fillers and can be completely removed even with mild paint degreasers. High Cut and Gloss Level with 3D ACA X-TRA 500 3D 500 can be applied using rotary or eccentric machines, leaving a very glossy finish for a HeavyCut polish without hazing. Ideally, 3D 500 is used before a finishing polish such as 3D ACA X-TRA 520, 3D One Hybrid, or any comparable polish. 3D ACA 500 becomes clear after a short working time, allowing a good view of the paint surface. 3D 500 is characterized by a very long working time and is economical due to the late breaking down of the polishing particles into smaller particles. Easy to Use: 3D ACA X-TRA 500 3D 500 is solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 500 does not create dust and can be easily wiped off. It is recommended to use 3D sparingly to avoid any excess. We recommend using microfiber pads, wool pads, and hard to medium-hard foam pads with 3D. Due to its high viscosity, 3D 500 does not splash even at high RPMs.

3D ACA X-TRA 510 is a cutting-edge paint polish designed for Heavy Cut applications. This polish can be used with both rotary and dual-action polishers. As known from other 3D polishes, it has an extended working time. It works faster than the 3D 500 on severe paint defects. 3D 510 contains innovative 'Alpha Ceramic Alumina' abrasive particles, allowing for a significantly longer processing time. It is suitable for both soft single-layer paints and hard clear coats. 3D 510 is free from fillers and can be completely removed even with gentle paint degreasers. High Material Removal in No Time with 3D ACA X-TRA 510 3D 510 can be used both excentrically and rotationally, leaving a gloss finish typical for Heavy Cut polishes without dulling. Ideally, 3D 510 is used before a finishing polish like the 3D ACA X-TRA 520, 3D One Hybrid, or a comparable product. 3D ACA 510 becomes clear after a short processing time, allowing for good visibility on the paint. It features a very long working time and is economical due to the late breakdown of the abrasive particles into smaller fragments. Very Easy Application: 3D ACA X-TRA 510 3D 510 is solvent-free, kerosene-free, and filler-free. Despite its eco-friendly and user-friendly formulation, 3D 510 does not produce dust and can be easily wiped off. It is advisable to use 3D sparingly to avoid excess. We recommend using it with microfiber pads, wool pads, and hard to medium-soft foam pads. Thanks to its high viscosity, 3D 510 does not spray even at high RPMs.