Accessories – Professional Support for Cleaning and Care

pr88 - Skin Protection Creampr88 is the classic skin protector for oily, greasy, and stubborn dirt.Applied to the hands before work, this cream forms a reliable protective film that effectively prevents dirt particles from penetrating the skin. After work, pr88 makes skin cleaning easier. Dirt is simply washed away along with the protective film.Areas of Application- oily, greasy dirt areas- stubborn dirtpr88 skin protection cream protects the skin during work with oil, grease, paint, graphite, soot, dust, tar, (PU) adhesives, synthetic resin, polyester, silicone, etc.Application and DosageApplicationBefore work, carefully rub a hazelnut-sized amount of pr88 (approx. 2-3 ml) into the hands - especially the fingernails/nail beds - and let it dry.WorkThe dry, elastic, and grip-stable protective film creates an effective barrier between the skin and the substances being worked with.Washing OffAfter work, wash the hands with gradually added water, rinse thoroughly, and dry. Dirt will be rinsed off together with pr88.The Benefits at a Glance Easy application Short drying time Non-sticky, leaves no fingerprints Secure tool grip Finger dexterity remains intact Very high protection potential during work Facilitates skin cleaning Free from preservatives and silicone Very good skin compatibility - dermatologically tested Product NoteThe use of skin protection products does not exempt from the obligation to use legally required protective measures. Skin Compatibility2007 Dermatest GmbH, Society for Allergological Research, 48155 MünsterResult: pr88 is confirmed to have very good skin compatibility after dermatological testing on humans.No allergic or toxic-irritative reactions occurred in the epicutaneous test according to international guidelines. Effectiveness Confirmation2002/2003 "Prevention against lipophilic noxae through skin protection products".Effectiveness confirmation as well as testing of skin compatibility according to the BUS model.Result: very high protection potential and very good skin compatibility. Top position among 8 commercially available products. Published in "Occupational Medicine Social Medicine Environmental Medicine", Issue 8 - 2003. Ingredients (INCI)Aqua, Glycerin, Sodium Silicate, Sodium Tallowate, Ceteareth-5, Sodium Palm Kernelate, Paraffin, Fragrance. Environmentpr88 is biodegradable.Water hazard class 1 (according to VwVwS). Safety and Regulationspr88 is not subject to transport regulations concerning hazardous materials.pr88 complies with the legal provisions of the EU Cosmetics Directive as a skin protection preparation.As a skin protection product, pr88 belongs to personal protective equipment (PPE) according to Directive 89/656 EEC, which must be provided by the employer. Storage/Shelf Lifepr88 can be stored between 0 and 25 °C. The minimum shelf life of unopened containers is 30 months.

The sturdy, rubber-made 3D keychain of the Rupes iBrid Nano Mark II is a detailed and scaled-down replica of the popular mini polisher. A stylish and practical accessory for all fans of the innovative iBrid technology! Rupes iBrid Nano Mark II 3D Keychain Exact, scaled keychain of the Rupes iBrid Nano Mark II Made from high-quality, flexible rubber material Fine details and realistic miniature replica Dimensions approx. 9 cm x 3 cm x 2 cm Limited edition for true Rupes enthusiasts Whether for your keyring, polishing shelf, or as a collector's item – this keychain is the perfect merchandise highlight for every detailing professional!

Thanks to the latest COB LED technology and optimized light dispersion, the I-MATCH 3 headlamp with battery offers extremely bright and even illumination of the entire field of view. Compared to its predecessor, the new I-MATCH 3 features the ALL DAYLIGHT function, which provides five different color temperatures depending on the type of work being performed. It also has a smooth dimming function, allowing you to easily adjust the light output from 10% to 100%. Upgraded from 160 lumens to 250 lumens, it is the ultimate tool for hands-free lighting in any detailing or color matching task. In sensor mode, the lamp can be easily turned on and off with a hand movement in front of it—even while wearing thick gloves. Superior Headlamp with Battery for Exterior and Interior Detailing The I-MATCH 3 headlamp is equipped with the latest battery technology. The robust and sleek I-MATCH 3 is not only dust and waterproof (IP65) but also remarkably lightweight at just 100g. Headlamp with battery that illuminates your entire field of view. ALL DAYLIGHT function with five color temperatures Sensor mode for easy switching on and off Continuously adjustable dimming from 10% to 100% Robust and waterproof, IP65 Lightweight at only 100g Lighting Solutions for Painting and Coating Businesses As the most comprehensive and well-thought-out series of its kind, the lighting solutions for painting and coating businesses are ideal for vehicle detailing and color matching, as well as for any painting work where a painted surface needs to be inspected. CRI+ for Accurate Color Matching With our lighting solutions for painting and coating businesses, we utilize the CRI+ color rendering index, which is defined as the average of all 15 R-values. This is the only correct definition of the CRI value for precise and reliable color rendering. Included in the delivery is a USB charging cable, but no power adapter or charger. Technical Specifications COB LED with extremely high CRI+ value 96 CRI+ 2500-6500 KELVIN 60-600 Lux@0.5 m 25-250 Lumens 1.5-15 hours operating time 3.8 V/1600mAh Li-ion 3.5 hours charging time IK07 IP65 100g (including battery) 104 x 39 x 50 mm

Everyone knows that for car detailing, especially in the interior, there are many useful tools, effective cleaners, and high-quality microfiber products. However, if the lighting is insufficient, dirt in the details can go unnoticed. No matter how hard you try, if you can't see what needs detailing, it's of little use. The Danish manufacturer Scangrip provides the perfect solution with the LINE LIGHT BONNET C+R. Perfectly Combined Battery and Mains Operation: Scangrip Line Light Bonnet C+R at Chemical-Shark.de The new BONNET LIGHT version provides an extremely bright and powerful illumination. Compared to conventional fluorescent tubes, it offers 75% more brightness. This rechargeable engine bay light is designed for both battery and mains operation (5m robust rubber cable), making it versatile. The DUAL SYSTEM provides total flexibility for everyday tasks. In a wireless mode, the engine bay light can also serve as a large inspection lamp. Ideal Mounting Options for All Areas of the Car Delivered with an adjustable telescopic holder with soft padded hook ends for safe and gentle grip without scratching the bodywork. The holder is compact and takes up little storage space. In the passenger compartment, the BONNET LIGHT can be used as a work light, either mounted on the telescopic holder or with a flexible arm and suction cup on the windshield. Recognized High-Quality Lighting Technology from Denmark With the built-in prism, the engine bay light focuses the light in a 75° beam angle for extremely bright and powerful illumination of the respective work area. Glare while working is prevented, and the light can be rotated for optimal illumination angle. Improved light output (1000 lumens) increased by 40% Robust and waterproof, IP65 Two light levels (50 or 100%) for maximum operation time New magnetic electronic switch Thinnest and most compact engine bay light on the market Extremely lightweight, only 1000 g including holder

SUNMATCH 4 - LED Work Light with High CRI+ Value and New CCT SCAN Function Compared to its predecessor, the SUNMATCH 4 features a unique, stepless CCT SCAN function. When activated, the CCT SCAN function automatically scans the surface of the object across the entire color temperature spectrum from 2500K to 6500K. This function can be locked at any time, allowing you to adjust the light for specific inspection tasks. This provides ideal conditions for accurate color matching and the detection of paint defects. Dimmable from 10 to 100% The SUNMATCH 4 has a stepless dimming function from 10% to 100%. For inspection tasks, the light is equipped with a spotlight on top. Durable for Everyday Use The light can be easily mounted and adjusted for inspections with its robust, rotatable hook or strong built-in magnet at the bottom. The flexible lamp head is swivelable up to 180°. The sturdy and waterproof design is rated IP65. It features a solvent-resistant glass lens. The battery indicator at the front shows when the battery needs to be recharged. To prevent overheating, the intelligent thermal protection system reduces the power to 50% after three minutes of continuous operation at full brightness. Perfectly Equipped Easy to carry in your pocket or with the integrated belt clip for your work belt – always handy for quality checks at all stages of car detailing. The SUNMATCH 4 is always ready for use and easy to find when placed back in the charging dock after work. The included diffuser provides soft, diffuse light without harsh contrasts between light and shadow. Additionally, glare and reflections are reduced. The diffuser is simply mounted on the lens. Technical Specifications COB LED with extremely high CRI+ value / Spot High-performance LED 96 CRI+, Spot: 95 CRI 2500-6500 KELVIN, Spot: 4000 KELVIN 50-500 Lumen, Spot: 200 Lumen 700/1400 Lux@0.5 m, Spot: 5000 Lux@0.5 m 2-10 hrs. operating time, Spot: 3 hrs. 4 hrs. charging time 3.7 V/2600mAh Li-ion IK07 IP65 267 g 185 x 38 x 26 mm Included in the Box Charging dock USB cable Diffuser without charger

UNIMATCH – Head and Pen Light for Car Detailing and Paint Inspection UNIMATCH is a multifunctional LED light designed for precise color control and detailing work in car care. The combination of headlamp and pen light provides maximum flexibility – whether detecting fine scratches or inspecting painted surfaces. Thanks to the stepless CCT adjustment, the color temperature can be precisely set between 2500 and 6500 Kelvin – perfect for any application situation. Compact head and pen light in one Continuously adjustable color temperature (2500–6500 K) Two light modes up to 150 lumens + 75 lumens spot Lightweight, magnetic, with clip and holder The thoughtful design makes UNIMATCH an essential tool in professional car care. Weighing only 50 grams, it fits comfortably in the hand or on the headband. It can rotate 360 degrees to achieve the optimal light angle and can be attached to a cap or directly to clothing if needed. The high-quality CRI+ technology ensures absolutely reliable color reproduction, as required in painting and surface inspection. Whether in daylight or in the workshop – UNIMATCH provides the needed flexibility to optimally illuminate every surface and make fine details visible. An ideal tool for anyone looking to professionally detail, paint, or identify color defects.

ShineMate 100mm Adhesive Eraser Pad – Notched Disc for Chuck or M8 Mount The ShineMate 100mm Adhesive Eraser Pad is a durable, notched eraser disc designed for effective and gentle removal of adhesive residues, stickers, trim, and striping leftovers. Made from special elastic plastic, this eraser pad cleans without damaging paint, plastics, or other sensitive surfaces. With a 25mm thickness, it offers long service life and consistent pressure transmission. Available with M8 thread or for chuck operation depending on the version. Notched eraser disc Ø 100mm – high removal power for stubborn adhesive residues 25mm material thickness – durable and vibration-reducing during use Special plastic – gentle on paint and surfaces Available with M8 thread or for chuck mounting Perfect for tape, film, striping, and sticker residues Applications & Benefits The ShineMate Eraser Pad is ideal for car detailing, paint and bodywork, as well as industrial and craft applications. It quickly and precisely removes adhesive residues on body parts, rims, plastic trims, window frames, or painted surfaces. Use with drill or polishing machine chucks ensures safe handling and even pressure—delivering scratch-free, damage-free results.

ShineMate 100mm Double-Tooth Eraser Pad – Tough Adhesive Remover for Drill Chuck The ShineMate 100mm Double-Tooth Eraser Pad is a powerful tool designed for quick, thorough removal of stubborn adhesive residues, stickers, film, and striping leftovers. Its double-tooth design boosts removal efficiency while maintaining precise control. Made from special elastic plastic, this eraser pad safely cleans without damaging paint, plastic, or delicate surfaces. With a sturdy 25mm thickness, it guarantees durability and stability. Engineered for safe use in drill or polisher chucks. 100mm double-tooth eraser disc – excels on tough adhesive residues 25mm thickness – long-lasting with smooth operation Special elastic plastic – gentle on paint, plastic, and coated surfaces Chuck attachment – quick, secure fit on common machines Perfect for adhesive tape, film, sticker, and striping residue removal Applications & Benefits The ShineMate double-tooth Eraser Pad is ideal for professional detailing, paint shops, and bodywork garages. It efficiently tackles strongly adhered residues on car bodies, rims, plastic trims, and window frames. The chuck-mounted design offers precise control, even pressure, and clean results without scratches, smearing, or surface damage.

ShineMate 30mm Sanding Pad Holder with PSA & Hook-and-Loop ShineMate 30mm Sanding Pad Holder with PSA & Hook-and-Loop delivers maximum flexibility for precise sanding tasks in spot repair, paint correction, and detailing. One side features a PSA adhesive (Pressure Sensitive Adhesive), while the other side has a hook-and-loop fastener. This design makes the holder compatible with various sanding media and working styles. PSA side for attaching sanding pads Hook-and-loop side for hook-and-loop sanding discs Suitable for wet and dry sanding Grippy rubber material ensures precise control Secure, ergonomic handling Compatible with sanding pads and discs from Kovax, 3M, ShineMate, and others The PSA side guarantees a flat, firm hold for glued sanding pads, while the hook-and-loop side allows quick swapping of hook-and-loop sanding media. Both sides ensure a secure grip and uniform sanding without slippage. The stable yet flexible rubber material adapts perfectly to contours, enabling fine work even on sensitive paint surfaces. The ShineMate 30mm Sanding Pad Holder with PSA & Hook-and-Loop is a versatile pro tool for spot paint correction, dust nib removal, and polishing prep.

ShineMate Klett-Stützteller hard 30mm für EB200, Kovax & Micrum Exzenterschleifer Der harte Klett-Stützteller mit 30 mm Durchmesser von ShineMate ist die optimale Lösung für Schleif- und Polierarbeiten auf engstem Raum. Ausgelegt für den Einsatz mit dem EB200 sowie bauähnlichen Exzenterschleifern von Kovax, Voss Chemie und Micrum, bietet dieser Stützteller eine robuste Klett-Oberfläche zur sicheren Befestigung verschiedenster Schleif- und Poliermedien mit Fließrücken. Ideal geeignet ist der Teller für Schleifblüten und Pads von Herstellern wie Kovax, Indasa, 3M oder Mirka, die über eine Klett- oder Fließrückseite verfügen. In Kombination mit einem passenden Interfacepad lässt sich der Schleifdruck gezielt anpassen. Alternativ kann der Teller auch für feine Polierarbeiten mit den Schaumstoffpads von Detail Passion eingesetzt werden – etwa zur punktuellen Lackkorrektur in engen Zwischenräumen oder Sicken. Dank des exzentrischen Hubs wird die Gefahr von Polierspritzern deutlich reduziert, insbesondere im Vergleich zur rotativen Polierbewegung. 30 mm Klett-Stützteller – hart und formstabil Kompatibel mit Klett/Fließrücken-Schleifmedien Geeignet für 3 mm, 5 mm und 6 mm Exzenterhub Passend für ShineMate EB200, Kovax, Micrum & Voss Chemie Ob beim Schleifen, Spot-Repair oder punktuellen Polieren – dieser Stützteller bietet maximale Präzision auf kleinster Fläche.

ShineMate 75mm Notched Adhesive Eraser Pad – Precision Chuck-Mounted Disc The ShineMate 75mm Adhesive Eraser Pad is a compact, easy-to-handle solution for gentle removal of adhesives, stickers, film, and striping residues. Its smaller diameter allows for precise work even in tight or hard-to-reach areas. The reduced size also minimizes vibrations and improves control during use. Made from special elastic plastic, the notched disc effectively removes residues without damaging paint, plastics, or other sensitive surfaces. Designed for safe use with the chuck of drills or polishers. Notched 75mm Eraser Disc – ideal for detailed precision work Compact size – easy to handle, low vibration, enhanced control Special plastic – gentle on paint, plastic, and sensitive surfaces Chuck attachment – simple and secure mounting Perfect for adhesive tape, film, sticker, and striping residue removal Applications & Benefits The ShineMate 75mm Eraser Pad is ideal for detail work in car detailing, painting, and wrapping jobs, as well as precise craftsmanship applications. It effectively removes adhesive residues on body edges, plastic trims, mirror housings, rims, or tight contours with targeted control. Its smaller diameter significantly reduces vibrations and enables fatigue-free, highly precise work – perfect for sensitive areas and fine detailing.

ShineMate EB200A – Cordless Spot Sander with 3mm Stroke for Smart Repair and Paint Shops The ShineMate EB200A is a compact, cordless random orbital sander featuring a 3mm stroke, specially designed for spot repair work in paint shops and smart repair applications. Thanks to its lightweight design and high maneuverability, it’s perfect for precise sanding tasks in hard-to-reach areas. 3mm sanding stroke for fine sanding and removing paint defects Compact design for working in tight spaces and on complex contours Cordless operation with a powerful battery for maximum freedom of movement Ergonomic design for enhanced comfort and control 30mm backing pad, ideal for precise work on small surfaces Maximum no-load speed of 10,000 RPM for optimal sanding results Perfect for spot repair, removing dust inclusions, and fine detailing Technical Specifications: Model: EB200A Voltage: 10.8 V DC No-load speed: 5,000–10,000 RPM Weight: 0.5 kg Sanding stroke: 3 mm Backing pad: 30 mm Set Contents: ShineMate EB200A Random Orbital Sander 1x Battery (10.8 V) 1x Charger Storage case Additional replacement batteries are available separately to enable longer working hours without interruptions. The ShineMate EB200A is the perfect choice for professional painters and detailers in need of a powerful cordless sander for fine and precise tasks.

ShineMate EB210 – The Ultimate Cordless Mini Polisher & Spot Sander The ShineMate EB210 is a powerful cordless mini polisher featuring an innovative quick change system, which can be used as both a random orbit sander and a polisher. Its compact design and strong performance allow for precise work in hard-to-reach areas – perfect for smart repair, paint corrections, and spot polishing. Main Features of ShineMate EB210: Versatile Use: Polishing & sanding with rotary and eccentric movements Compact Design: Ideal for tight and hard-to-reach spots Innovative Quick Change System: Quick switch between rotary and eccentric polishing High-Performance Battery: Cordless operation with 10.8V battery for maximum flexibility High-Quality Complete Set: Includes extensive accessories for professional work Precise Speed Control: Orbital Revolutions: 3,000–8,000 RPM Rotary Revolutions: 700–8,000 RPM Technical Specifications: Model: EB210 Battery Voltage: 10.8V DC Max. Support Plate Size: 75 mm Speed Range: Orbital Revolutions: 3,000–8,000/min Rotary Revolutions: 700–8,000 RPM Warranty: 2 years on battery and machine Contents of the ShineMate EB210 Set: ShineMate EB210 Mini Polisher 10.8V Charger 2x 10.8V 2.5Ah Batteries Rotary Support Plates: 31mm, 48mm, 65mm Eccentric Support Plates: 31mm, 48mm, 65mm Mounting accessories and tools for the quick-change system 10 Foam Polishing Pads 3 Microfiber Polishing Pads Medium Cut 3 Microfiber Polishing Pads Heavy Cut 3 Foam Polishing Pads Heavy Cut 3 Foam Polishing Pads Medium Cut 3 Foam Polishing Pads Finish High-Quality Transport Case Recommended Accessory Extensions: The manufacturer recommends using the 65mm support plate in eccentric mode with 75mm polishing pads. Alternatively, the optional 74mm support plate can also be used. The ShineMate EB210 is the perfect choice for professionals and enthusiasts who need a powerful, cordless mini polisher with maximum precision and flexibility.

ShineMate ES700-6/3 Orbital Sander with 3 mm Stroke The ShineMate ES700-6/3 Orbital Sander is engineered for top-tier sanding tasks in automotive and paintwork. Featuring a fine 3 mm stroke, adjustable speed from 4,000 to 10,000 OPM, and innovative gearless drive, it delivers ultra-smooth, low-vibration operation. Ideal for precise finishing, sanding clear coats, primers, and fillers, and for prepping delicate surfaces professionally before painting. The powerful 380-Watt Brushless Motor ensures consistent sanding performance, while its lightweight, ergonomic design makes extended use comfortable. 3 mm orbit stroke for fine, controlled sanding 380-Watt brushless motor for high efficiency and durability Speed range 4,000–10,000 OPM for versatile applications Gearless drive for exceptional smoothness and minimal vibration 150 mm Dust Devil multi-hole backing pad for optimal dust extraction Electronic speed control with 6-step adjustment Constant speed thanks to electronic motor control Soft start for controlled power-up Efficient dust extraction for a clean working environment Detachable 5-meter power cord Front LED lighting for optimal work area visibility Ergonomic design weighing approx. 1.39 kg The 3 mm stroke enables material-friendly sanding and leaves an extremely fine finish, perfect for the final sanding before painting or removing minor surface defects. The 6-step speed control with a range of 4,000 to 10,000 OPM offers precise adaptation to different materials and abrasives. The electronic constant speed control guarantees even results under load. A standout feature is the gearless drive, which unlike traditional models, minimizes disruptive vibrations. This results in extraordinarily smooth operation, better machine control, and more comfortable work—especially during long sessions or on sensitive paint surfaces. Comfort Built for Professionals The advanced brushless motor offers high power, quiet running, low maintenance, and long service life. Its ergonomic housing reduces user fatigue while minimal vibration enables precise work over extended periods. Clean Work Area with Effective Dust Extraction The included 150 mm Dust Devil multi-hole backing pad ensures highly efficient dust extraction. Paired with a suitable vacuum system, sanding surfaces stay cleaner, abrasive lasts longer, and surface quality improves. The built-in front LED also guarantees perfect visibility of your work. Applications The ShineMate ES700-6/3 is ideal for professional car detailing, paint shops, Smart Repair, bodywork, and demanding workshops. Its 3 mm orbit excels in fine finishing tasks, providing an even sanding pattern with minimal material removal. Combining brushless technology, gearless drive, adjustable speed, and efficient dust extraction makes the ES700-6/3 a powerful sander for the highest demands.

ShineMate ES700-6/5 Sander with 5mm Orbit The ShineMate ES700-6/5 orbital sander is the perfect choice for professional sanding jobs demanding higher material removal. Unlike the ES700-6/3 with 3mm orbit, this version features a 5mm orbit, offering an ideal balance between fine sanding results and increased cutting power. With an adjustable speed range of 4,000 to 10,000 OPM, gearless transmission for ultra-smooth operation, and a powerful 380W brushless motor, it’s perfect for paint shops, vehicle detailing, smart repair, and bodywork. 5mm orbit for efficient material removal and clean sanding finish More power than the 3mm version with controlled handling 380W brushless motor for high efficiency and long lifespan 4,000–10,000 OPM speed range for versatile use Gearless drive for ultra-smooth run and low vibration 150mm Dust Devil multi-hole backing pad for excellent dust extraction Electronic speed control with 6 levels Consistent speed via electronic motor management Soft-start for controlled ramp-up Detachable 5m power cable Front LED for optimal work area lighting Ergonomic design with lightweight approx. 1.39 kg The 5mm orbit makes the ES700-6/5 highly versatile. While the 3mm model is designed for ultra-fine finishing, the 5mm version provides noticeably higher material removal, ideal for sanding paints, fillers, and primers as well as prepping larger surfaces before painting. The gearless design ensures extraordinarily smooth operation. Without a traditional gearbox, vibrations are minimized, improving control and allowing comfortable use over extended periods. Precise speed control for professional results With 6-step speed adjustment, the ShineMate ES700-6/5 can be perfectly matched to the sanding material, surface, and task. The 4,000 to 10,000 OPM range allows flexible application from delicate finishing to aggressive sanding in paint and bodywork. Comfort for professional use The modern brushless motor delivers powerful performance, quiet operation, low maintenance, and long durability. Ergonomic housing reduces user fatigue, and low vibration supports precise work even during long shifts. Clean workspace with efficient dust extraction The included 150mm Dust Devil multi-hole backing pad ensures effective dust extraction. Used with a proper extraction system, it keeps the sanding area clean, slows abrasive clogging, and improves surface quality. The built-in front LED enhances visibility. Applications The ShineMate ES700-6/5 is ideal for professional vehicle detailing, paint shops, smart repair, bodywork, and demanding workshops. Whenever higher material removal than the 3mm version is needed, the 5mm orbit shows its strengths.

ShineMate Sander EB201A – Cordless Mini Excentric Sander with 3mm Stroke for Precise Sanding TasksThe ShineMate Sander EB201A is a compact, powerful cordless eccentric sander with a 3mm stroke. Designed for demanding spot repair and smart repair applications, it is ideal for use in paint shops and for fine sanding tasks. Its lightweight design and wireless flexibility allow for particularly precise and effortless handling - even in hard-to-reach areas.Weighing only 495g (without battery), the EB201A is incredibly lightweight, allowing for prolonged use without fatigue. The powerful motor with an idling speed of up to 10,000 RPM provides consistent, fine sanding performance and an excellent finish.Perfect Control for Fine Sanding TasksWith its 3mm sanding stroke, the ShineMate EB201A is ideal for fine correction tasks and removing dust inclusions. Its compact 75mm back pad allows for precise processing of small areas and complex contours without damaging adjacent surfaces. Whether in paint preparation, smart repair applications, or fine detailing work – this mini eccentric sander delivers precise and uniform results.Benefits of the ShineMate Sander EB201ACordless Freedom: No disruptive cable – maximum mobility while working.Lightweight and Ergonomic: Just 495g (without battery), comfortable to handle, ideal for longer applications.3mm Stroke: Perfect for fine sanding tasks and removing small paint defects.Powerful Motor: Stepless speed control up to 10,000 RPM for precise control.75mm Back Pad: Optimal for small areas and hard-to-reach places.Ideal for Spot Repair and Paint CorrectionsThanks to its precise control and gentle sanding motion, the ShineMate EB201A is particularly well-suited for the spot correction of paint errors. Whether small scratches, dust inclusions, or fine transitions – this sander enables precise processing without unnecessary material removal.Contents of the Complete SetShineMate EB201A Cordless Eccentric Sander1x 10.8V Battery1x ChargerRobust Transport CaseThe ShineMate Sander EB201A is the perfect choice for professionals in vehicle preparation and paint shops who value cordless flexibility and precise sanding results. With its lightweight, powerful 10,000 RPM speed, and 3mm stroke, it is an essential tool for anyone looking to efficiently and effortlessly carry out fine correction tasks.

ShineMate Sanding Flower Holder 30mm PSAShineMate Sanding Flower Holder 30mm PSA is a precise tool designed for professional sanding tasks in spot repair, paintwork, and detailing. Made for attaching sanding flowers, it allows controlled sanding wet or dry with high safety and accuracy.PSA adhesive system (Pressure Sensitive Adhesive) for secure sanding flower attachmentSuitable for wet and dry sandingErgonomic rubber plastic grip for optimal controlSafe, fatigue-reducing handlingPerfect for hand sanding on pinpoint correctionsCompatible with sanding flowers from Kovax, 3M, ShineMate and moreThe integrated PSA system ensures flat, firm adhesion of sanding flowers to the surface, preventing slippage during sanding. Quick, clean media changes without residue are possible. The flexible yet stable rubber plastic adapts perfectly to contours, supporting a uniform, fine sanding finish.ShineMate Sanding Flower Holder 30mm PSA is ideal for removing dust inclusions, smoothing minor paint imperfections, and prepping before polishing – an essential accessory for professional car detailing and paintwork.

ShineMate SiC Sanding Flowers Ø 32mm – 10-PackShineMate SiC Sanding Flowers Ø 32mm are the perfect solution for precise sanding in spot repair, paint correction, and detailing. Featuring high-quality Silicon Carbide (SiC), they deliver extremely consistent abrasion both in dry and wet sanding. These sanding flowers combine the best of both worlds for maximum control with minimal material removal.Adhesive sanding flowers for dry and wet sandingSiC abrasive ensures fine, controlled sanding resultsSuitable for sanders and hand sandingPerfectly matched for ShineMate EB210, EB200A cordless sanders and similar models from Mirka, Flex, KovaxLong lifespan and consistent performanceOriginal ShineMate qualityContents: strip with 10 sanding discsGrits: choose between 2500 (purple) or 3000 (grey)The Silicon Carbide (SiC) used has a very sharp grain structure enabling an ultra-fine finish – ideal for evening out dust inclusions, sanding before polishing, and precise paint correction. Thanks to the reliable hook-and-loop backing, the sanding flowers securely attach to the backing pad and can be quickly swapped – efficient, clean, and professional.

ShineMate SiC Sanding Flowers Ø 32mm – 10-Pack The ShineMate SiC Sanding Flowers Ø 32 mm deliver precision sanding for spot repair, paint, and detailing tasks. Made with premium silicon carbide (SiC), they ensure consistent sanding performance for both dry and wet sanding. Combining the best of both worlds, these sanding flowers offer maximum control with minimal material removal. Adhesive-backed for dry and wet sanding SiC abrasive for ultra-fine, controlled sanding results Compatible with sanders and hand sanding Perfectly matched for ShineMate EB210, EB200A cordless sanders and similar tools from Mirka, Flex, Kovax Long-lasting with consistent performance Genuine ShineMate quality Includes: strip with 10 sanding discs Grit options: either 2500 (purple) or 3000 (grey) The sharp grain structure of the silicon carbide (SiC) abrasive provides a super fine finish, ideal for leveling dust nibs, pre-polishing sanding, and demanding paint correction work. Thanks to reliable hook-and-loop backing, sanding flowers stay firmly on the backing pad and allow fast disc changes – efficient, clean, and professional.

ShineMate SiC Sanding Flowers Set P2500 & P3000 – Perfect for Flawless Paint Correction The ShineMate SiC Sanding Flowers Set P2500 & P3000 is a compact starter kit designed for precise paint defect repair. It combines two essential grits for modern car detailing, suitable for both manual use and with an orbital sander. Ideal to experience the power of premium SiC abrasives and apply them effectively. Includes P2500 and P3000 SiC sanding flowers For wet and dry sanding applications Perfect for hand sanding or machine use Consistent and controllable sanding results Great as an entry-level or spot-repair addition Targeted Defect Repair Made Easy The P2500 and P3000 grits efficiently address common paint issues like scratches, dust inclusions, and light stone chips. The sanding flowers enable precise control and are ideal for spot treatments. Fine Sanding Finish for Easy Polishing The P3000 finish delivers an ultra-fine sanding texture, allowing treated areas to be polished quickly and effortlessly. This saves time and reduces follow-up work. Versatile Use – Manual or Machine Whether by hand or with a suitable orbital sander, the sanding flowers provide consistent performance in both dry and wet conditions. This makes the set highly versatile for different workflows. Compact Introduction to Professional Sanding This set is perfect for users looking to gain first experience with premium abrasives or expand their existing setup strategically. A smart combo for clean results and controlled sanding.

ShineMate SiC Wet & Dry Sanding Kit – Precision Paint Correction Like a Pro The ShineMate SiC Wet & Dry Sanding Kit tackles even the toughest paint defects with exact control. Featuring high-quality SiC sanding petals in P2500 and P3000 grit plus a matching holder, it enables precise work on small areas – efficient, safe, and with impressive results. A well-designed set for those who demand clean defect correction and a perfect finish. Includes P2500 and P3000 SiC sanding petals Comes with sanding petal holder (30mm, PSA/Velcro) Consistent and controllable sanding pattern Suitable for wet and dry use Ideal set for precise spot-repair jobs Targeted Correction Without Oversanding Whether dealing with scratches, baked-on insect residue, or stone chips, the compact sanding petals allow spot-on treatment. This reduces unnecessary material removal and maximizes control during application. Fine Finish for Quick Polishing The fine P3000 sanding pattern creates perfect conditions for follow-up polishing. Treated areas can be easily restored to high gloss, saving time and enhancing the final result. Flexible Use and Safe Handling The sanding media work reliably both wet and dry, offering consistent performance. Combined with the holder, it provides stable, controlled guidance – perfect for precise work even on delicate paint surfaces. Compact, Efficient, and Thoughtfully Crafted This set is designed for users who want to work targeted and efficient while relying on premium materials. A powerful combination of performance, control, and cost-effectiveness for modern paint correction.

With Snappy Grip, you can equip any standard bucket or even specialty bucket for car washing with a very comfortable grip. Snappy Grip easily wraps around the existing metal handle, making it significantly easier to carry even full buckets. No more blue fingers or pressure marks when carrying buckets, ensuring a secure hold. Washing with buckets becomes enjoyable. The bucket’s wobbling while carrying is reduced, thus avoiding wet feet. Even with high-quality buckets from Grit Guard or Chemical Guys, we find it practical to replace the existing carrying protection with Snappy Grip. Snappy Grip is available in various colors.Key Product Features of Snappy Grip Bucket Carry Aid:stable hold and comfortable carrying of bucketsprevents wobbling and spillagevery comfortable and secure gripcompatible with all standard buckets and special wash buckets for hand car washing

With Snappy Grip, you can outfit any standard bucket or even a specialized bucket for vehicle washing with a very comfortable grip. Snappy Grip easily wraps around the existing metal handle, making it much easier to carry even fully filled buckets. No more blue fingers or pressure marks while bucket carrying and a secure hold. Washing with buckets becomes a joy. It also reduces the bucket's wobble while carrying, thus avoiding "wet feet". Even with high-quality buckets from Grit Guard or Chemical Guys, it makes sense to replace the existing carrying protection with Snappy Grip. Snappy Grip is available in various colors.Key product features of Snappy Grip Bucket Carry Handle:stable grip and comfortable carrying of bucketsprevents wobbling and spillagevery comfortable and secure gripcompatible with all standard buckets and specialized buckets for hand washing vehicles

With Snappy Grip, you can upgrade any standard bucket or specialty bucket for vehicle washing with a very comfortable grip. Snappy Grip simply wraps around the existing metal handle, making it much easier to carry even fully filled buckets. No more blue fingers or pressure marks while carrying the bucket, providing a secure hold. This makes bucket washing enjoyable. It also reduces bucket wobble during transport, preventing those pesky "wet feet". Even with high-quality washing buckets from Grit Guard or Chemical Guys, we find it practical to replace the existing carrying protection with Snappy Grip. Snappy Grip is available in different colors.Key Features of Snappy Grip Bucket Carry Handle:stable hold and comfortable carrying of bucketsprevents wobbling and spillingvery comfortable and secure gripsuitable for all standard buckets and special washing buckets for vehicle hand washing

With Snappy Grip, every standard bucket or special bucket for vehicle washing gets a very comfortable grip. Snappy Grip wraps around the existing metal handle, making it much easier to carry even full buckets. Say goodbye to blue fingers and pressure marks when carrying buckets, providing a secure hold. Washing with buckets becomes a pleasure! The rocking of the bucket during transport is minimized, preventing wet feet. We find it beneficial to replace the existing carrying protection with Snappy Grip, even for high-quality buckets from Grit Guard or Chemical Guys. Snappy Grip is available in different colors.Key product features of Snappy Grip Bucket Carry Handle:stable hold and comfortable carrying of bucketsprevents rocking and spillagevery comfortable and secure gripcompatible with all standard buckets and special washing buckets for hand washing vehicles

With Snappy Grip, you can enhance any standard bucket or specialized bucket for car washing with a very comfortable grip. Snappy Grip easily wraps around the existing metal handle, making it significantly easier to carry even fully filled buckets. No more blue fingers or pressure marks while carrying your bucket, ensuring a secure hold. Washing with buckets becomes a pleasure. It also reduces the wobbling of the bucket while carrying, thus avoiding wet feet. Even with high-quality buckets from Grit Guard or Chemical Guys, we find it useful to replace the existing carrying protection with Snappy Grip. Snappy Grip is available in various colors.Key Features of Snappy Grip Bucket Carry Helper:stable hold and comfortable carrying of bucketsprevents wobbling and spillagevery comfortable and secure gripcompatible with all standard buckets and special car wash buckets

With Snappy Grip, you can equip any standard bucket or even a specialized bucket for vehicle washing with a very comfortable grip. Snappy Grip simply wraps around the existing metal handle, making it much easier to carry even full buckets enormously. No more blue fingers or pressure points while carrying your bucket and a secure grip. This makes washing with buckets enjoyable. The shaking of the bucket while carrying is also reduced, preventing "wet feet". We also find it beneficial to replace the existing carrying protection with Snappy Grip, even for high-quality buckets from Grit Guard or Chemical Guys. Snappy Grip is available in different colors.Key Product Features of Snappy Grip Bucket Carrying Aid:stable hold and comfortable carrying of bucketsprevents shaking and spillagevery pleasant and secure gripsuitable for all standard buckets and special bucket for hand washing vehicles

With Snappy Grip, you can easily equip any standard bucket or special bucket for car washing with a very comfortable grip. Snappy Grip wraps around the existing metal handle, making it easier to carry even full buckets enormously. No more blue fingers or pressure points while carrying the bucket, plus a secure grip. Washing with buckets becomes enjoyable! The bucket's wobbling while carrying is reduced, preventing "wet feet". Even with high-quality buckets from Grit Guard or Chemical Guys, we find it sensible to replace the existing carrying protection with Snappy Grip. Snappy Grip is available in different colors.Key features of Snappy Grip Bucket Handle Helper:stable grip and comfortable carrying of bucketsprevents wobbling and spillsvery pleasant and secure gripsuitable for all standard buckets and special buckets for car hand washing

ShineMate Soft Backing Pad 30mm for EB200, Kovax & Micrum Orbital Sanders The soft ShineMate backing pad with 30 mm diameter is specially designed for fine sanding and sensitive surfaces. It provides a flexible, vibration-damping sanding base and is ideal for sanding work with fine grits – both wet and dry. The backing pad is compatible with the ShineMate EB200 and similar orbital sanders by Kovax, Voss Chemie, and Micrum. Thanks to its soft design, the backing pad adapts perfectly to curves and contours, ensuring a uniform sanding pattern without aggressive edge formation. The high-quality PSA adhesive surface ensures a secure hold of sanding discs but can be easily removed. Suitable for machines with 3 mm, 5 mm, or 6 mm stroke, this backing pad is particularly versatile – ideal for paint preparation, intermediate sanding, or finishing work. 30 mm diameter – perfect for precise fine sanding tasks Soft design for finer sanding grits Damping and contour-adaptive Compatible with ShineMate EB200, Kovax, Micrum, and Voss Chemie Suitable for 3 mm, 5 mm, and 6 mm stroke A harder version of this backing pad is also available for coarser sanding tasks, providing maximum stability and pressure.

Easily and quickly removes stubborn insect residue, bird droppings, and other tough dirt without scratching. Suitable for all vehicle surfaces such as paint, glass, and plastic. Use the net structure for easy and effective cleaning on glass and plastic. For gentle treatment of sensitive paint surfaces, work with the microfiber side. Net structure for quick dirt release Different fibers for dual dirt removal Machine washable

Highly absorbent and lint-free professional microfiber cloth for glass cleaning. The waffle-textured surface glides gently over windows for a streak-free shine. Glass cleaning cloth with special microfiber Gentle and reliable cleanliness Waffle structure

The perfect tool for time-saving, easy, and paint-friendly vehicle drying through twisted loop microfiber, which boasts a long lifespan. The high-quality microfiber fabric features wide loops that absorb and retain water due to capillary action. The result is a flawless, pearl-free drying. With rounded corners and sewn edges. Large drying cloth with twisted fibers Lightweight and paint-friendly drying With rounded corners and sewn edges

The soft and gentle microfiber quality ensures thorough and safe cleaning of all paint, glass, and plastic surfaces. Dirt is trapped within the fibers, preventing scratches on the surfaces. The ergonomic glove shape with thumb and dividing seam in the finger area, along with the elastic cuff, prevents twisting and slipping. Mit for various cleaning surfaces Reliable dirt removal With elastic cuff

The microfiber brush effortlessly removes stubborn dirt, even in hard-to-reach areas. The long handle allows cleaning down to the rim's edge. The high-quality microfiber provides optimal scratch protection, making it perfect for sensitive wheel surfaces (e.g., glossy black). The non-slip grip feels comfortable in hand and ensures a secure hold. Includes adjustable dirt catcher. Suitable for all types of wheels.Microfiber brush for quick dirt removalIdeal for glossy wheelsNon-slip rubberized grip

With Sonax PROFILINE Microfibre Wash, the German manufacturer enters the market for microfiber washing products. This special liquid detergent in a 1-liter container is sufficient for approximately 20 machine washes for typical dirt. It even removes stubborn dirt from the fibers, loosens the fiber structure, and makes towels fluffy again. Optimized microfiber detergent suitable for polishing pads Effective even at 40°C Also suitable for soaking towels

The silicone mask of protection class A1 and P2 is designed for working with solvent-based sealants, paints, and cleaners. Made primarily of silicone, it is very comfortable to wear and does not cause any skin irritation. The gas filter cartridge and dust filter cartridge provide the necessary protection classes and are interchangeable. Finixa Carbon Filter Mask P2 Comfortable silicone mask (high quality) ideal for ceramic sealing work Fits snugly around the face and causes no irritation With interchangeable gas filter cartridge and interchangeable dust filter cartridge Practical size, pleasant feel Lightweight at only 370 g including 2 filters

Stainless Steel Filter Weight for Foam and Pressure Sprayers The Stainless Steel Filter Weight is a smart accessory for all Carton Battery Foam Sprayers and Carton Battery Pressure Sprayers. It is designed to keep the intake hose anchored to the bottom of the container. This ensures that the liquid can be used up almost completely, regardless of the position of the sprayer during use. No more hassle with readjustment, and every last drop is utilized. Keeps the intake hose securely at the bottom: Ensures nearly complete emptying of the container. Easy installation: The weight slides onto the intake hose without tools and is ready to use immediately. High-quality material: Made of stainless steel, durable and easy to clean. Ideal for use with cleaners and foam solutions: Suitable for all common applications in vehicle care. Features in Use The Stainless Steel Filter Weight provides a consistent liquid flow, supporting comfortable and clean work. Even when the sprayer is tilted or the container is nearly empty, the intake hose remains optimally positioned. This accessory significantly enhances user comfort and is a valuable addition for anyone regularly using Carton sprayers.

Accessory kit for Tecnovap EVO HILL or other steam cleaners with corner connection system such as MediClean and ThermoStar. 3m steam hose with remote control at the handle 2 extension tubes 480mm Rectangular brush Triangular brush Window cleaning attachment Steam lance Nylon brush for steam lance 28mm Brass brush for steam lance 28mm Stainless steel brush for steam lance 28mm Steam spatula Steam suction bell 60mm Nylon brush 60mm Triangular brush Steel wool

Tecnovap Brass Brush Ø 28mm – Powerful Cleaning for Stubborn DirtThe Tecnovap Brass Brush Ø 28mm reliably removes stubborn dirt and deposits. The medium-hard brass bristles ensure thorough cleaning of grout lines, metal parts, and tough surfaces. Thanks to the standardized plug system, it is compatible with many steam cleaners.Benefits of the Tecnovap Brass Brush:High-quality brass bristles for powerful cleaningPerfect for grout, metal, and robust materialsDurable and resilient bristlesCompatible with Tecnovap and other steam cleaners

Compact chrome transport trolley for the Tecnovap HILL EVO steam cleaner, featuring storage for extensions, hose, and a basket for accessories. Original Tecnovap trolley designed for HILL EVO Mounts for extensions and steam hose Two practical baskets for accessories and cloths Rubberized wheels and stable, secure support

Tecnovap Drain Valve 3/8 Inch for Steam Boiler is the original replacement part for safe and reliable water drainage from the steam boiler. This high-quality stainless steel screw is an essential maintenance part that should be replaced at the service interval to ensure the functionality and longevity of the device. Product Features Original Tecnovap Drain Valve for steam boiler drainage Made of sturdy stainless steel – durable and corrosion-resistant Fits many devices with a 3/8 inch steam boiler connection Compatible with similar devices like Mediclean and Thermostar O-ring seal available separately

Flexible steam lance as an accessory or replacement for Tecnovap EVO HILL or other steam cleaners with the cantilever connector system, such as MediClean and ThermoStar. Ideal for accessing hard-to-reach, tight spaces like ventilation slots and engine compartments. Original Tecnovap Compatible with cantilever connector system High-quality plastic Made in Italy

Fogger for dry steam additives like air fresheners or car fragrances for Tecnovap EVO HILL or other steam cleaners with flange connection systems such as MediClean and ThermoStar. Ideal for reaching hard-to-access, narrow areas like ventilation slots and engine bays. Original Tecnovap Capacity 500 ml Compatible with flange connection system High-quality plastic Made in Italy

HILL EVO by Tecnovap is a commercial-grade dry steam cleaner delivering steam temperatures up to 174°C. Its stainless steel boiler (AISI 304) operates at 8 bar pressure, producing 64 grams of dry steam per minute. Equipped with an intuitive front control panel, steam output can also be adjusted in 3 levels via the remote control at the hose connection. Compact yet powerful, the Tecnovap HILL EVO is perfect for car care, detailing, workshop, and household cleaning tasks. Its ergonomic design makes it ideal for PPF (paint protection film) installation and is recommended by Profilm Germany/Austria.Professional dry steam cleaner/generatorDual-chamber system for refill during operation3L water tank, stainless steel boiler, steel housingMax power 2.4 kW5m power cable for 230V3m high-quality plastic steam hose16 kg weightWheels on base unit and carrying handleIncludes extensive nozzle attachments and extensionsThe Technovap HILL EVO is available for commercial users only. This original device may appear similar to variants sold under other brands by different providers. Due to growing demand for premium steam cleaners and thorough testing, we import and offer this unit directly from the manufacturer in original condition. Warranty is extended to two years with available spare parts and accessories.Chemical-Free Car Care with Dry SteamWater is the foundation of cleaning and the most crucial element in car care. Since water alone cannot dissolve and remove dirt effectively, cleaners are usually needed. However, pressure and temperature drastically boost water’s cleaning power, enabling it to be used as an eco-friendly sole cleaning agent. Dry steam generated by the HILL EVO contains only free water molecules moving at intense heat, penetrating deep into dirt and breaking it down. It kills bacteria and neutralizes odors.True Dry Steam Without Excess WaterThe HILL EVO produces real dry steam without dripping water, making it suitable for surfaces and components where cheap hardware-store devices fail. No surprise the unit may look and feel familiar if you've seen similar devices in detailing and car care scenes. The HILL EVO is the original Italian-made device delivered with comprehensive accessories.Perfect for PPF Installers and Car WrappersSearching for high-quality, budget-friendly tools for PPF installation led us to the HILL EVO. Dry steam units are popular and highly useful for paint protection film work. Thanks to its excellent ergonomics, operational reliability, and integrated descaling, the HILL EVO is the perfect choice.Included Accessories3m steam hose with remote control on handpiece2 extension tubes 480mmRectangle brushTriangle brushWindow cleaning attachmentSteam lance28mm nylon brush for steam lance28mm brass brush for steam lance28mm stainless steel brush for steam lanceSteam spatula60mm steam suction cup60mm nylon brushTriangle brushStainless steel woolOptional AccessoriesOptional accessories for the HILL EVO include a 5m steam hose and a work trolley. The unit is shipped without an accessory bag; we offer a FLEX transport box. For absorbing dissolved dirt, we recommend the Pike microfiber towels from Detail Passion, made in Germany.

Tecnovap Horsehair Brush Ø 28mm – Gentle Cleaning for Delicate Surfaces The Tecnovap Horsehair Brush Ø 28mm is perfect for gentle cleaning of sensitive materials. The soft natural bristles clean thoroughly without damaging surfaces. Especially suitable for leather, wood, or painted areas. Thanks to the standardized plug system, it can also be used with other steam cleaners. Benefits of the Tecnovap Horsehair Brush: Gentle natural bristles for delicate surfacesDiameter 28 mm for precise cleaningEffective against light dirtCompatible with many steam cleaners

Tecnovap O-Ring Seal 2056 14.00 x 1.78 Black is the perfect original seal for the Tecnovap drain screw on the steam boiler. It ensures reliable sealing during water drainage and is an essential maintenance component to prevent leaks and steam escape. Product Features Original Tecnovap O-Ring Seal for the drain screw Precise dimensions: 14.00 x 1.78 mm – optimal fit Made from durable material for high temperature and steam tolerance Essential during every replacement of the drain screw Compatible with devices such as Mediclean and Thermostar

Tecnovap Refill Bottle 750ml – Clean and Safe Refilling The Tecnovap Refill Bottle with a 750 ml capacity allows for easy and safe filling of steam cleaners. The spill and overflow protection prevents unwanted spillage and ensures comfortable handling. The bottle is compatible with Tecnovap steam cleaners as well as devices from other manufacturers that use the same connection system. Benefits of the Tecnovap Refill Bottle: 750 ml volume for convenient refilling Spill and overflow protection for clean application Ergonomic shape for easy handling Compatible with many steam cleaners using the same connection systems

Tecnovap Stainless Steel Brush Ø 28mm – Maximum Power for Stubborn Dirt The Tecnovap Stainless Steel Brush Ø 28mm effectively removes burned-in residues, rust, and heavy deposits. The extremely durable stainless steel bristles provide maximum cleaning power, especially for industrial applications or heavily used surfaces. Thanks to the standardized plug system, it's compatible with many steam cleaners. Advantages of the Tecnovap Stainless Steel Brush: Hard stainless steel bristles for maximum cleaning power Ideal against rust, burned-in residues, and heavy dirt For professional and industrial use Compatible with many steam cleaners