Accessories – Professional Support for Cleaning and Care

When you need to safely clean wheels and rims from road dirt and brake dust, the Mothers Wheel Brush is the perfect choice. Its extra-soft, scratch-free bristles with a non-slip comfort grip and lightweight, ergonomic design make it ideal for this task. With its protective rubber edge, the Mothers Wheel Brush cleans safely while protecting sensitive adjacent surfaces. Very lightweight, ergonomic design for wheel cleaning High quality, suitable for multiple uses Secure, non-slip rubber grip Rubber edging to protect adjacent surfaces

MotoLibre Canister Label Tape – Never Fuel the Wrong Tank Again!We all know the scenario: the canister sits in the garage and suddenly you ask yourself – what was actually inside? That’s where the MotoLibre Canister Label Tape steps in. Traditional methods like stickers or markers often fail: smudging or fading, especially from fuel contact, is common. Stickers can peel, soften, or become illegible or fall off over time. The MotoLibre label tape offers a durable, reliable solution: key fuels like 1:50 mix, petrol, and diesel are woven into the tape for permanent readability – even under tough conditions.No more guessing the canister contentsDurable, highly visible labelingNo smudging, fading, or peelingPerfect for garage, workshop, and on the goAn integrated, slidable viewing window reliably shows the current fuel inside, preventing errors and keeping handling safe and intuitive every time.Maximum Safety for People and MachinesMisfuelling has been one of the most frequent and costly mistakes for decades when dealing with equipment like lawnmowers, motorcycles, and cars. Grabbing the wrong petrol or fuel canister can quickly cause severe damage. At best the error is spotted in time; at worst, it can lead to a total engine failure. The MotoLibre label tape ensures the content is always clearly identifiable, effectively preventing such errors. With multiple canisters in everyday use, it creates clarity, safety, and confidence every time you fuel up.Premium Materials & Thoughtful DesignThe label tape is made from a high-quality, elastic woven fabric, specially designed for petrol and fuel canisters. It’s chemically resistant to petrol and diesel, extremely robust, and built to last. Even with heavy use, the labeling remains clear and reliable. Its flexible design allows easy mounting and secure grip, making it perfect for daily use in garages, workshops, or professional environments.German InnovationThe MotoLibre label tape is a well-designed and protected safety solution for handling fuels. The utility model protection has been granted and the patent is pending. Developed in Germany by inventor Alexander Ettlich, this product stands for quality, innovation, and practical functionality. It merges a smart idea with premium execution – for long-lasting, safe fuel canister marking.Colors & ExtensionsThe MotoLibre label tape is currently available in red, blue, and orange, providing quick visual differentiation between petrol and fuel canisters. More labels and versions are in development to continuously expand its application range. Stay in control and create clear, safe, and professional fuel organization at all times.

MotoLibre Canister Labeling Tape – Never Fuel the Wrong Way Again! Who hasn’t been there: The canister is in the garage, and you suddenly wonder – what was inside again? That’s exactly where the MotoLibre Canister Labeling Tape comes in. Traditional methods like stickers or markers often fail: smudging or fading like with markers is common, especially when exposed to fuel. Stickers also have obvious drawbacks – they can peel off, soften, or become illegible or fall off over time. The MotoLibre labeling tape offers a durable and reliable solution: key fuels like 1:50 mix, petrol, and diesel are firmly woven in and remain permanently legible – even under tough conditions. No more guessing the canister contents Permanent, highly visible labeling No smudging, fading, or peeling Perfect for garage, workshop, and on the go An integrated, slidable viewing window clearly shows which fuel is inside the canister. This effectively prevents errors and ensures safe, intuitive handling at all times. Maximum Safety for People and Machines Misfuelling has been one of the most common and costly mistakes for decades with equipment like lawn mowers, motorcycles, and cars. Grabbing the wrong petrol or fuel canister can have serious consequences. At best, the mistake is caught just in time – at worst, it leads to engine failure. The MotoLibre labeling tape ensures the contents are always clear so these costly errors are reliably avoided. Especially in daily use with multiple canisters, it provides better organization, safety, and peace of mind with every use. Premium Materials & Thoughtful Design The labeling tape is made from high-quality elastic woven fabric specially designed for petrol and fuel canisters. It is chemically resistant to petrol and diesel, extremely robust, and durable. Even with intensive use, the labeling remains permanently legible and reliable. The flexible construction allows easy installation and secure hold, making it ideal for daily use in garages, workshops, or commercial settings. Innovation from Germany The MotoLibre labeling tape is a cleverly engineered and protected solution for safer fuel handling. The utility model protection is granted, and the patent is pending. Developed in Germany by inventor Alexander Ettlich, the product stands for quality, innovation, and practical functionality. It combines a smart concept with premium execution for durable, safe labeling of fuel canisters. Colors & Expansions The MotoLibre labeling tape is currently available in red, blue, and orange, providing quick visual differentiation of various petrol and fuel canisters. Additional labels and versions are in development to continuously broaden its applications. Stay in control and create clear, safe, and professional fuel organization at all times.

MotoLibre Canister Labeling Tape – Say Goodbye to Refueling Mistakes! We've all been there: the fuel canister sits in the garage and suddenly you ask yourself – what was inside again? That's exactly where the MotoLibre canister labeling tape comes in. Traditional methods like labels or permanent markers often fail: smudging or fading, especially when exposed to fuel, is common. Labels can peel, soften, or become illegible or fall off over time. MotoLibre's tape offers a durable, reliable solution: key fuels like 1:50 mix, petrol, and diesel are woven in permanently and remain clearly readable—even under tough conditions. No more guessing what's in your fuel canister Permanent, highly visible labeling No smudging, fading, or peeling Perfect for garage, workshop, and on the go An integrated, slidable viewing window clearly shows which fuel is in the canister, preventing mistakes and ensuring safe, intuitive handling every time. Top Safety for You and Your Machine Misfuelling has been one of the most common and costly mistakes for decades affecting lawn mowers, motorcycles, and cars. Grabbing the wrong gas canister can have serious consequences. At best, the error is caught in time – at worst, it leads to engine damage. MotoLibre’s labeling tape ensures the contents are always clearly identifiable, avoiding costly errors. With multiple canisters in daily use, it creates clarity, safety, and peace of mind. Premium Materials & Smart Design The tape is made from a high-quality, elastic woven fabric specially designed for gasoline and fuel containers. It’s chemically resistant to petrol and diesel and extremely durable. Even with heavy use, the labeling remains legible and reliable. Its flexible design allows for easy mounting and secure hold, making it ideal for everyday use in garages, workshops, or professional settings. Innovation Made in Germany MotoLibre’s labeling tape is a clever and protected solution for safer fuel handling. The utility model patent has been granted, and a patent application is filed. Developed in Germany by inventor Alexander Ettlich, it stands for quality, innovation, and practical functionality—combining smart ideas with premium execution for lasting, safe fuel canister marking. Colors & Variants Currently available in red, blue, and orange, the tape also helps quickly visually differentiate between fuel cans. New labels and versions are in development to continuously expand usage options. Stay in control with clear, safe, and professional fuel organization.

1/2 inch male adapter for connecting the MTM Hydro GHF1 low-pressure foam sprayer to a Gardena garden hose. 1/2 inch male thread to Gardena adapter Impact-resistant plastic Perfect for GHF1 low-pressure foam cannon

Hersteller: MTM HYDRO S.r.l., Via Moglia 33 , 12062 Cherasco CN IT, info@mtmhydro.it

DP Pro Quick Connect components are engineered for safe pressure washer operation and crafted with utmost precision. Compatible with MTM Hydro spray guns, cleaning wands, and foam lances, they also adapt products from brands like Kärcher, Nilfisk, and Kränzle. MTM Hydro 1/4in Round Coupling Adapter F for 1/4in Pressure Washer 1/4 inch thread on both ends Connection via screw fitting Rated up to 200 bar

MTM Hydro EXS28 Acqualine Pressure Washer Lance azurro 50cm The MTM Hydro EXS28 Acqualine Pressure Washer Lance is a premium lance designed for professional car care and demanding cleaning tasks. Made from high-quality AISI 316 stainless steel, it offers maximum corrosion resistance, low weight, and long durability. The distinctive Acqualine azurro-blue insulation ensures high comfort and a unique premium look. With a length of 50cm (20 inches) and an ergonomic 15° bend angle, this lance is perfect for vehicle roofs, wheel arches, sills, and hard-to-reach areas. Premium high-pressure lance from the MTM Hydro Acqualine Series Crafted from AISI 316 stainless steel for ultimate corrosion resistance Exclusive Acqualine azurro color finish 50cm total length (20") 15° angled nozzle end for ergonomic handling Available with 1/4" male thread (AG) or 1/4" Quick Connect Ideal for MTM Hydro guns and other 1/4" Quick Connect guns Suitable for cold and hot water use Operating pressure up to 280 bar Temperature resistant up to 150°C Highlights of the EXS28 Acqualine The EXS28 stands out with its vented construction, making it noticeably lighter than conventional lances with solid plastic handles. This reduces fatigue during extended cleaning sessions. The 15° bend significantly improves ergonomics, enabling a more natural spray angle on vehicle surfaces. When rinsing, it creates a controlled water film (“Water Blade”) that efficiently removes water and dirt from surfaces. Choose Between Threaded or Quick Connect Versions The 1/4" male threaded version fits setups with classic 1/4" female threaded connectors. The 1/4" QC version includes matching 1/4" Quick Connect coupler and 1/4" Quick Connect plug for ultra-fast accessory changes. Note on the Quick Connect Version The MTM Hydro EXS28 Acqualine Pressure Washer Lance azurro 1/4" QC 50cm ships with Quick Connect parts unassembled for flexible self-installation. This allows coupling and plug to be mounted and aligned perfectly to your individual setup. Perfect for Professional Car Detailing The EXS28 Acqualine is a favorite among detailers and professional car care pros who value ergonomics, premium materials, and maximum control. Paired with an MTM Hydro SGS35 or other premium pressure washer guns, it creates a pro setup for pre-wash, rinsing, and foam applications.

MTM Hydro EXS28 Acqualine Pressure Washer Lance azurro 50cm The MTM Hydro EXS28 Acqualine Pressure Washer Lance is a premium lance designed for professional car care and demanding cleaning tasks. Made from high-grade AISI 316 stainless steel, it offers superior corrosion resistance, lightweight handling, and long-lasting durability. Its distinctive Acqualine azurro-blue insulation ensures excellent user comfort and a unique premium look. With a length of 50cm (20 inches) and an ergonomic 15° bend angle, this lance is perfect for vehicle roofs, wheel arches, sills, and hard-to-reach areas. Premium pressure washer lance from the MTM Hydro Acqualine Series Crafted from AISI 316 stainless steel for ultimate corrosion resistance Exclusive Acqualine azurro color finish 50cm total length (20") 15° angled nozzle for ergonomic operation Available with 1/4" male thread or 1/4" Quick Connect Compatible with MTM Hydro guns and other 1/4" Quick Connect pistols Suitable for cold and hot water Operating pressure up to 280 bar Temperature resistant up to 150°C Why Choose the EXS28 Acqualine? The EXS28 stands out from classic lances thanks to its vented (aired) design. This makes it noticeably lighter than traditional lances with solid plastic handles, reducing fatigue during extended cleaning sessions. The 15° angle significantly enhances ergonomics, allowing a more natural spraying angle on car surfaces. While rinsing, it creates a controlled water film (“Water Blade”) that efficiently removes water and dirt from the surface. Threaded or Quick Connect Options The 1/4" male thread version fits setups using classic 1/4" female threaded connectors. The 1/4" QC version comes with matching 1/4" Quick Connect coupler and 1/4" Quick Connect plug for swift accessory changes. Quick Connect Variant Note For the MTM Hydro EXS28 Acqualine Pressure Washer Lance azurro 1/4" QC 50cm, Quick Connect components are delivered unassembled for flexible self-installation. This allows coupling and plug to be mounted and aligned perfectly according to your individual setup. Perfect for Professional Car Detailing The EXS28 Acqualine is a favorite among detailers who value ergonomics, premium materials, and maximum control. Paired with an MTM Hydro SGS35 or other high-end pressure guns, it forms a professional setup ideal for pre-wash, rinsing, and foam applications.

GHF1 Foam Sprayer – Perfect Foam Cleaning Without High Pressure The GHF1 Foam Sprayer by MTM Hydro is the ideal solution for anyone who wants to gently and effectively foam their vehicle without using a high-pressure cleaner. Thanks to its innovative design, the foam sprayer connects directly to a garden hose, ensuring even foam distribution for a gentle clean. Includes Gardena Nipple – Easy to Use The GHF1 comes standard with a Gardena nipple that guarantees a secure, leak-proof connection to your garden hose. Just attach the hose, fill in the cleaner, and start foaming right away. Who is the GHF1 Foam Sprayer for? This low-pressure foam sprayer is perfect for: Vehicle owners wanting to gently wash cars, motorcycles, bicycles, boats, or aircraft Users without a pressure washer who still want effective foam cleaning Anyone valuing a gentle, even foam application to protect delicate surfaces Technical Highlights of the GHF1 Foam Sprayer With the GHF1, MTM Hydro launches its first low-pressure foam sprayer for garden hoses. Its robust, impact-resistant plastic housing is molded from a single piece for maximum durability. The adjustable air intake lets you control foam density to match your cleaning needs. Another feature is the included MTM Hydro Adaptable Wide Mouth Bottle. This 1-liter bottle stands stably on flat surfaces and has a graduated scale for precise detergent dilution. Product Benefits at a Glance: Low-pressure foam sprayer, ideal for Gardena couplings Easy 1/2-inch internal thread connection Adjustable foam dosing via a handy control knob Perfect for caravans, bikes, motorcycles & sensitive surfaces where high pressure is not suitable Flexibility with Multiple Connection Options The GHF1 foam sprayer can be operated in two ways: Via the 1/2-inch internal thread to connect to various hoses or adapters Via the included Gardena nipple for quick and easy garden hose attachment This makes the GHF1 perfect for anyone seeking effective foam cleaning with minimal water pressure – whether for cars, motorcycles, bikes, or campers. Especially useful: the gentle application protects delicate surfaces, preventing water intrusion under pressure or damage to paint and seals. Conclusion: High-Quality Foam Cleaning Made Easy The MTM Hydro GHF1 Foam Sprayer makes vehicle care easier than ever. Its combination of low-pressure technology, durable construction, and flexible connections makes it the perfect companion for gentle cleaning without high-pressure washers. Try it now and enjoy thorough, gentle foam cleaning!

MTM Hydro Rubberized High-Pressure Nozzle with 1/4" Quick Connect The MTM Hydro Rubberized High-Pressure Nozzle delivers professional cleaning power with superior surface protection. Its durable rubber coating minimizes the risk of scratches or damage during accidental contact with paint, rims, or delicate surfaces. Equipped with a 1/4" Quick Connect fitting, it’s perfect for professional pressure washer setups in car care, detailing, and commercial use. Available in black, red, blue, and premium Acqualine azurro options. Rubber-coated high-pressure nozzle by MTM Hydro Features 1/4" Quick Connect fitting Colors: black, red, blue, Acqualine azurro Selectable spray angles: 15°, 25°, 40°, 60° Choice of 035 or 040 Orifice Rubber protection reduces surface contact risk Ideal for professional car care and pressure washing Spray Angles Tailored for Every Task Select the perfect spray fan based on your cleaning needs. Spray angle significantly affects pressure impact and water distribution. 15°: Narrow, powerful spray for tough grime removal 25°: Versatile all-rounder for vehicle washing and pre-cleaning 40°: Wide fan for gentle rinsing of sensitive surfaces 60°: Extra-wide water spread for soft rinsing and max coverage Mounting Instructions Components are delivered for self-assembly. Use appropriate sealants like Teflon tape or thread sealants to ensure a secure, pressure-tight connection. This allows optimal custom fitting for your setup. What Does Orifice Size Mean? The orifice size defines the nozzle opening, impacting working pressure and water flow. Smaller orifices boost pressure, larger ones increase water volume and reduce backpressure. 035 (3.5 Orifice): Recommended for pressure washers delivering approx. 5–8 l/min 040 (4.0 Orifice): Recommended for pressure washers delivering approx. 9–15 l/min Perfect for Professional Pressure Washer Setups MTM Hydro high-pressure nozzles pair seamlessly with MTM Hydro guns, lances, and quick-connect systems. Thanks to the rubberized exterior and precise water flow, they offer unmatched performance, ergonomics, and paint protection.

MTM Hydro ILS28 SQR Pressure Washer Lance 50cm The MTM Hydro ILS28 SQR Pressure Washer Lance is a high-quality, universal lance for professional vehicle cleaning. Featuring a total length of 50cm, an insulated handle, and an angled nozzle tip, it’s perfect for MTM Hydro pressure washer guns and other pistols with a 1/4" connection. Available with either a 1/4" male thread or a 1/4" Quick Connect design depending on the version. MTM Hydro ILS28 SQR lance for car detailing and cleaning Total length: 50cm 29cm insulated handle for comfortable handling Angled nozzle tip for improved ergonomics Available with 1/4" male thread or 1/4" Quick Connect Ideal for MTM pressure washer guns and 1/4" Quick Connect pistols Suitable for cold and hot water Working pressure up to 280 bar Threaded or Quick Connect - Flexible Options The 1/4" male thread version fits setups with standard 1/4" female thread connections. The 1/4" Quick Connect variant comes with matching 1/4" Quick Connect coupler and 1/4" Quick Connect plug for fast, convenient swapping of nozzle holders, spray nozzles, and accessories. Note on the Quick Connect Version The MTM Hydro ILS28 SQR Pressure Washer Lance 1/4" QC 50cm ships with Quick Connect components unassembled for flexible self-installation. This allows you to mount and align the plug and coupler according to your own pressure washer setup. Perfect for Professional Vehicle Detailing The MTM Hydro ILS28 SQR lance offers an excellent balance of control, reach, and ergonomics. Ideal for pre-washing, wheel cleaning, underbody areas, sills, wheel arches, and all applications demanding a robust and comfortable pressure washer lance.

MTM Hydro ILS28 SQR Pressure Washer Lance 50cm The MTM Hydro ILS28 SQR Pressure Washer Lance is a high-quality, universal lance designed for professional vehicle cleaning. With a total length of 50cm, an insulated handle, and an angled nozzle tip, it fits perfectly with MTM Hydro pressure washer guns and other guns featuring a 1/4" connection. Available in versions with 1/4" male thread or as a 1/4" Quick Connect model. MTM Hydro ILS28 SQR lance for vehicle care and cleaning Total length: 50cm 29cm insulated handle for comfortable handling Angled nozzle tip for better ergonomics Available with 1/4" male thread or 1/4" Quick Connect Ideal for MTM pressure washer guns and 1/4" Quick Connect guns Suitable for cold and hot water Operating pressure up to 280 bar Threaded or Quick Connect Options The 1/4" male thread version fits setups with classic 1/4" female thread. The 1/4" QC version comes with matching 1/4" Quick Connect coupler and 1/4" Quick Connect plug for fast and easy swapping of nozzle holders, spray nozzles, and other accessories. Note on the Quick Connect Version The MTM Hydro ILS28 SQR pressure washer lance 1/4" QC 50cm includes Quick Connect parts delivered unassembled for flexible self-installation. This allows you to fit and adjust the plug and coupler perfectly to your pressure washer setup. Perfect for Professional Vehicle Care The MTM Hydro ILS28 SQR lance offers a great balance of control, reach, and ergonomics. It's ideal for pre-washing, rim cleaning, underbody areas, door sills, wheel arches, and all tasks requiring a robust, comfortable high-pressure lance.

MTM Hydro NH35 / NH45 / NHF45 Nozzle Holders for Pressure Cleaners The MTM Hydro NH35, NH45 and NHF45 nozzle holders are premium holders designed for professional pressure washer setups, specifically crafted to securely fit 1/4" threaded spray nozzles. They ensure optimal surface protection, easy nozzle changes, and superior handling during vehicle washing. Available in blue, red, black and the premium Acqualine azurro variant, they blend Italian craftsmanship with functional design. High-quality nozzle holder for 1/4" threaded spray nozzles 1/4" female thread on inlet and outlet Perfect for pressure washers, lances, and guns with 1/4" fittings Compatible with bayonet and quick-connect adapters from Kränzle, Kärcher, Nilfisk, AVA and others Enhanced paint protection via rubberized protective cap Made in Italy by MTM Hydro Compatible with 1/4" Threaded Nozzles and Adapters Thanks to standardized 1/4" female threading on inlet and outlet, MTM nozzle holders can be flexibly integrated into existing pressure washer setups. They perfectly accommodate threaded spray nozzles of various orifice sizes and spray angles. The universal 1/4" threading also supports numerous adapter solutions for Kränzle bayonet, Kärcher adapters, Nilfisk quick connectors and quick connect systems. NH35, NH45 and NHF45 – What’s the Difference? The NH35 and NH45 models are made from robust metal with protective coating, offering high durability for daily use. The premium NHF45 Acqualine version features top-grade materials and the distinctive Acqualine azurro design, ideal for users seeking maximum quality, corrosion resistance, and an exclusive setup. Technical Specifications by MTM Hydro MTM Hydro nozzle holders are built for professional use under high stress. Depending on the model, galvanized steel or stainless steel components are combined with resilient protective caps. The design protects both the nozzle and delicate vehicle surfaces from damage in accidental contact. Maximum operating pressure: up to 310 bar / 4500 PSI Suitable for cold and hot water Material NH35 / NH45: metal body with protective coating Material NHF45 Acqualine: premium stainless steel components Connection: 1/4" F thread inlet / 1/4" F thread outlet Perfect for Professional Car Care MTM Hydro nozzle holders are especially popular among detailers and professional car care experts. Combined with high-quality pressure washer guns, lances, and precisely matched spray nozzles, they create a setup that maximizes cleaning performance while protecting paintwork optimally.

MTM Hydro NH35 / NH45 / NHF45 Nozzle Holders for Pressure Washers The MTM Hydro NH35, NH45, and NHF45 nozzle holders are premium mounts designed for professional pressure washer setups, specifically made to securely hold 1/4" threaded spray nozzles. They provide top-grade surface protection, simplify nozzle changes, and ensure excellent handling during vehicle washing. Available in blue, red, black and the premium Acqualine azurro variant, they combine Italian craftsmanship with functional design. Premium nozzle holder for 1/4" threaded spray nozzles 1/4" female thread inlet and outlet Perfect for pressure washers, lances, and pistols with 1/4" fittings Compatible with bayonet and quick-release adapters from Kränzle, Kärcher, Nilfisk, AVA and more Enhanced paint protection with rubberized protective cap Made in Italy by MTM Hydro Compatible with 1/4" Threaded Nozzles and Adapters The standardized 1/4" female thread inlet and outlet lets you easily integrate MTM nozzle holders into existing pressure washer setups. They are ideal for accepting threaded spray nozzles of various orifice sizes and spray angles. Thanks to the universal 1/4" threading, numerous adapter solutions for Kränzle bayonet, Kärcher adapters, Nilfisk quick connects, or quick connect systems are possible. NH35, NH45, and NHF45 – What’s the Difference? The NH35 and NH45 models feature durable metal bodies with protective coating, offering high resilience in everyday use. The premium NHF45 Acqualine version uses top-grade stainless steel components and sports the distinctive Acqualine azurro design. It’s aimed at users seeking maximum quality, corrosion resistance, and an exclusive setup. Technical Specifications by MTM Hydro MTM Hydro nozzle holders are built for professional use under high stress. Depending on the model, galvanized steel or stainless steel components are combined with tough protective caps. The design shields both the nozzle and sensitive vehicle surfaces from damage due to accidental contact. Maximum working pressure: up to 310 bar / 4500 PSI Suitable for cold and hot water Material NH35 / NH45: metal body with protective coating Material NHF45 Acqualine: premium stainless steel components Connection: 1/4" female thread inlet / 1/4" female thread outlet Perfect for Professional Car Detailing The MTM Hydro nozzle holders are highly favored by detailers and professional detail shops. Combined with high-quality pressure washer guns, lances and precisely matched spray nozzles, they create a setup that offers maximum cleaning power with optimal paint protection.

MTM Hydro NH35 / NH45 / NHF45 Nozzle Holders for High-Pressure CleanersThe MTM Hydro NH35, NH45, and NHF45 nozzle holders are premium-grade holders designed for professional high-pressure cleaner setups, specifically made to securely fit 1/4" threaded spray nozzles. They offer optimal protection for vehicle surfaces, simplify nozzle changes, and ensure superior handling during vehicle washing. Available in blue, red, black, and the premium Acqualine azurro variant, these holders combine Italian craftsmanship with functional design.High-quality nozzle holder for 1/4" threaded spray nozzles1/4" internal thread inlet and outletPerfect for high-pressure cleaners, lances, and pistols with 1/4" fittingsCompatible with bayonet and quick-release adapters from Kränzle, Kärcher, Nilfisk, AVA, and moreEnhanced paint protection thanks to a rubberized protective capMade in Italy by MTM HydroCompatible with 1/4" Threaded Nozzles and AdaptersWith standard 1/4" internal threading on both inlet and outlet, MTM nozzle holders integrate seamlessly into existing high-pressure setups. They are ideal for holding threaded spray nozzles with various orifice sizes and spray angles. Thanks to the universal 1/4" thread, numerous adapter options for Kränzle bayonet, Kärcher adapters, Nilfisk quick releases, and quick connect systems are available.NH35, NH45, and NHF45 – What Sets Them ApartThe NH35 and NH45 models feature robust metal construction with protective coating, delivering exceptional durability for daily use. The premium NHF45 Acqualine offers high-end materials and the distinctive Acqualine azurro design, targeting users who demand maximum quality, corrosion resistance, and an exclusive setup.Technical Specifications by MTM HydroMTM Hydro nozzle holders are built for professional heavy-duty use. Depending on the model, they use galvanized steel or stainless steel components combined with robust protective caps. The design safeguards not only the nozzle but also delicate vehicle surfaces from damage due to accidental contact.Maximum operating pressure: up to 310 bar / 4500 PSISuitable for cold and hot waterMaterial NH35 / NH45: metal body with protective coatingMaterial NHF45 Acqualine: premium stainless steel componentsConnection: 1/4" internal thread inlet / 1/4" internal thread outletPerfect for Professional Vehicle CareMTM Hydro nozzle holders are highly favored by detailers and professional car care specialists. Paired with high-quality high-pressure cleaner pistols, lances, and precisely matched spray nozzles, they create a setup that delivers maximum cleaning power with optimal paint protection.

MTM Hydro NH35 / NH45 / NHF45 Nozzle Holders for Pressure Washers The MTM Hydro NH35, NH45, and NHF45 nozzle holders are high-quality accessories designed for professional pressure washer setups, specifically made to securely hold 1/4" threaded spray nozzles. They provide optimal surface protection, ease nozzle changes, and ensure premium handling during vehicle washing. Available in blue, red, black, and the premium Acqualine azurro version, they combine Italian craftsmanship with functional design. Premium nozzle holder for 1/4" threaded spray nozzles 1/4" female thread inlet and outlet Ideal for pressure washers, lances, and guns with 1/4" fittings Compatible with bayonet and quick-connect adapters from Kränzle, Kärcher, Nilfisk, AVA, and more Enhanced paint protection via rubberized protective cap Made in Italy by MTM Hydro Compatible with 1/4" Threaded Nozzles and Adapters The standardized 1/4" female thread on both inlet and outlet allows the MTM holders to integrate seamlessly into existing pressure washer setups. Perfect for mounting threaded nozzles in various orifice sizes and spray angles. Thanks to the universal 1/4" connection, many adapter solutions are available for Kränzle bayonet, Kärcher adapters, Nilfisk quick-connects, and other quick-coupling systems. NH35, NH45, and NHF45 – What’s the Difference? The NH35 and NH45 models feature robust metal bodies with protective coatings, offering durability for daily use. The premium NHF45 Acqualine version stands out with top-tier materials and the distinctive Acqualine azurro design. It targets users seeking maximum quality, corrosion resistance, and an exclusive setup. Technical Specifications by MTM Hydro Designed for professional heavy-duty use, MTM Hydro nozzle holders come in galvanized steel or stainless steel components paired with durable protective caps. Construction protects both nozzle and vehicle surfaces from damage during accidental contact. Maximum operating pressure: up to 310 bar / 4500 PSI Suitable for cold and hot water Material NH35 / NH45: metal body with protective coating Material NHF45 Acqualine: premium stainless steel components Connection: 1/4" female thread inlet / 1/4" female thread outlet Perfect for Professional Car Care MTM Hydro nozzle holders are a favorite among detailers and professional car care specialists. Combined with high-quality pressure washer guns, lances, and precisely matched spray nozzles, they create a setup that delivers maximum cleaning power with optimal paint protection.

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers made in Italy. It handles up to 200 bar pressure and 11.5 L/min water flow. With a 1000 ml tank, it holds more than most competing foam cannons. Foam generation and delivery happen via flow and suction through the brass and stainless steel foam head. The PF22.2 offers numerous adjustments: spray pattern from round to flat, flat jet direction horizontal or vertical, and water/chemical mix concentration. It's engineered with a tip-proof design as an upgrade from the PF22 model. Perfect Foam for Auto Detailing & Care: MTM Hydro PF22.2 at Chemical-Shark.de After thorough research and testing, we proudly introduce the MTM Hydro PF22.2—the first Italian pressure washer foam cannon in our lineup. It meets all key practical requirements. With compatible adapters, which we continuously expand, this foam cannon fits most hobby and professional pressure washers. The MTM Hydro PF22.2 produces excellent foam even with low-viscosity APCs, making it perfect for universal use. The foam lance foams perfectly even at low concentrations, ensuring economical and eco-friendly vehicle cleaning. Our tests confirm the PF22.2’s quality and craftsmanship surpass many Asian knockoffs. For wear or damage, we also stock the correct replacement parts. Various Versions of the MTM Hydro PF22.2 Foam Lance The MTM Hydro is available fully assembled with different adapters or can be adapted via 1/4" screw thread. Contact us for help choosing the right adapter. High-quality Italian-made foam lance Patented foam generation technology Tip-proof design with fill level scale Adapters for Kränzle, Nilfisk, and Kärcher included

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, proudly made in Italy. It supports pressures up to 200 bar and a water flow of 11.5 l/min. Its 1,000 ml tank holds more than most foam cannons from other brands. Foam generation occurs via flow and suction through a precision brass and stainless steel foam head. The PF22.2 offers multiple adjustments: spray pattern from round to flat, flat spray direction horizontal or vertical, and water/chemical mixture concentration. This upgraded model is designed to be tip-resistant for stable use. Ultimate Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After thorough research and testing, we're proud to add MTM Hydro PF22.2—the first pressure washer gear from this Italian brand—to our lineup. It meets all key practical demands with adaptability for most hobby and professional pressure washers via available adapters we continue to expand. The PF22.2 produces outstanding foam even with low-viscosity APC cleaners, allowing versatile and eco-friendly vehicle cleaning. Minimal chemical concentration still creates rich foam, ensuring cost-effective, sustainable car care. Our tests also highlighted top-tier materials and craftsmanship, making it far superior to cheap Asian copies. Plus, matching spare parts ensure long-term service and easy maintenance. Various Versions of the MTM Hydro PF22.2 Foam Lance Available fully assembled with different adapters or adaptable by yourself using a 1/4 screw thread. Contact us for help choosing the right adapter. Premium foam lance made in Italy Patented foam generation technology Tip-resistant design with fill level scale Adapters for Kränzle, Nilfisk, and Kärcher included

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, made in Italy. It supports up to 200 bar pressure and a water flow of 11.5 l/min. With a 1000 ml tank, it holds more foam liquid than most foam cannons from other brands. Foam generation and delivery are ensured by a brass and stainless steel foam head using flow and suction technology. The MTM Hydro PF22.2 offers multiple adjustment options: spray pattern from round to flat, flat spray direction horizontally or vertically, and water-to-chemical mix concentration. Designed as an improved and tip-resistant version of the PF22.Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.deAfter extensive research and testing, we proudly introduce the MTM Hydro PF22.2 as the first Italian-made foam cannon for pressure washers in our lineup. It meets all key practical demands. With suitable adapters, which we will expand, the MTM Hydro fits most pressure washers for hobby and professional use. It delivers excellent foam even with diluted APC cleaners, making it universally applicable. Even at low concentrations, the PF22.2 foams perfectly for economical and eco-friendly vehicle cleaning.The MTM Hydro PF22.2 also stands out for its top-level material quality and craftsmanship, exceeding Asian counterfeits. If parts wear out or break, we carry all needed replacements.Different Versions of the MTM Hydro PF22.2 Foam LanceThe MTM Hydro comes ready-to-use with various adapters or can be adapted via 1/4 screw thread. We’re happy to help with advice on the right adapter.High-quality foam lance made in ItalyPatented foam generation technologyTip-resistant design with fill-level scaleAdapters available for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, crafted in Italy. It operates at up to 200 bar and 11.5 l/min water flow. With a 1,000 ml tank, it holds more foam solution than most competitors. Foam is generated via a brass and stainless steel nozzle using flow and suction. The PF22.2 features multiple adjustable settings: spray can be switched from round to flat, flat spray direction horizontal or vertical, and water/chemical mix concentration is adjustable. This upgraded model is designed to be tip-proof for secure handling.Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.deAfter extensive research and testing, we proudly offer the MTM Hydro PF22.2—our first Italian-made foam cannon for pressure washers. It meets all essential practical needs with versatile adapters, compatible with most hobby and professional pressure washers. The PF22.2 produces excellent foam even with low-viscosity APC cleaners, making it a versatile, economical, and eco-friendly choice for vehicle cleaning.Its outstanding build quality and materials outperform Asian counterfeits, ensuring durability. Replacement parts are available if needed.MTM Hydro PF22.2 Foam Lance VariantsThe foam lance is available pre-assembled with various adapters or can be adapted via 1/4 screw thread. If you need help selecting the right adapter, our team is happy to assist.High-quality Italian-made foam lancePatented foam generation technologyTip-proof design with filling scaleAdapters available for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for high-pressure cleaners made in Italy. The lance supports up to 200 bar and a water flow of 11.5 l/min. With a 1000 ml tank, the PF22.2 holds more foam solution than most foam cannons from other manufacturers. Foam generation and delivery are controlled via flow and suction through a brass and stainless steel foam head. The MTM Hydro PF22.2 offers multiple adjustments including spray pattern from round to flat, flat spray direction horizontally or vertically, and water/chemical mix concentration. Designed as an improved version of the PF22, this foam cannon is tip-resistant. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After thorough product research and extensive testing, we proudly welcome the MTM Hydro PF22.2 as our first high-pressure cleaner product from this Italian manufacturer. It meets all essential practical requirements we value. With compatible adapters (which we continue to expand), it fits most hobby and professional high-pressure cleaners. The MTM Hydro PF22.2 produces excellent foam even with low-viscosity APC cleaners, making it universally suitable. Even at low chemical concentration, the PF22.2 foams perfectly, enabling economical and eco-friendly vehicle cleaning. Our tests confirmed the PF22.2’s superior build quality and material finish, outperforming Asian copies. And if parts wear or break, we supply the matching spare parts. Various Versions of the MTM Hydro PF22.2 Foam Lance The MTM Hydro is available fully assembled with different adapters or can be fitted via 1/4" threaded screw. For adapter advice, feel free to contact us. High-quality Italian-made foam lance Patented foam generation technology Tip-proof design with fill level scale Adapters for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for high-pressure cleaners, crafted in Italy. Compatible with up to 200 bar and a water flow of 11.5 l/min, its 1,000 ml tank holds more foam solution than most competitors. Foam generation and delivery are driven by flow and suction through a brass and stainless steel foam nozzle. The PF22.2 offers extensive adjustments: spray pattern from round to flat, flat spray direction horizontal or vertical, and water/chemical mix concentration. Designed as a tilt-proof upgrade from the PF22. Ultimate Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive research and testing, we proudly add the first Italian high-pressure foam cannon to our lineup. The MTM Hydro PF22.2 meets all key practical demands. With various adapters—more coming soon—it fits most hobby and professional pressure washers. It produces dense foam even with low-viscosity APCs, enabling universal, eco-friendly, and efficient vehicle cleaning. Our tests confirm the PF22.2’s quality and workmanship surpass Asian copies. Plus, we stock all necessary spare parts for wear or damage. MTM Hydro PF22.2 Foam Lance Variants Available pre-assembled with different adapters for quick use or adaptable via 1/4" thread. Need adapter advice? We’re here to help. Premium Italian-made foam lance Patented foam generation technology Tilt-proof design with fill level scale Adapters for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, made in Italy. It operates with up to 200 bar and a water flow of 11.5 l/min. With a 1000 ml tank, it holds more than most foam cannons from other brands. Foam generation and delivery occur through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.2 offers numerous adjustable settings: the spray pattern can be switched from round to flat, the flat spray angle can be adjusted horizontally or vertically, and the water/chemical mix concentration can be controlled. Designed as an upgraded, tip-proof version of the PF22.Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.deAfter thorough product research and intensive testing, we are proud to add the MTM Hydro PF22.2, the first pressure washer product from this Italian manufacturer, to our range. It meets all practical requirements we consider essential. With suitable adapters—which we will expand—the MTM Hydro fits most hobby and professional pressure washers. It delivers excellent foam even with low-viscosity APC cleaners, allowing universal use. Even at low concentrations, the PF22.2 perfectly foams products enabling economical and eco-friendly vehicle cleaning.Our tests prove the MTM Hydro PF22.2’s high quality and material durability, surpassing Asian counterfeits. Should parts wear or break, we stock matching replacements.Various Versions of the MTM Hydro PF22.2 Foam LanceThe MTM Hydro is delivered ready to use with various adapters or can be fitted via a 1/4-inch screw thread. Contact us for assistance selecting the right adapter.High-quality foam lance made in ItalyPatented foam generation technologyTip-proof design with fill-level scaleAdapters available for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, made in Italy. The lance operates at up to 200 bar with a water flow of 11.5 l/min. Its 1000 ml tank holds more than most foam cannons from other brands. Foam generation and delivery are controlled through a brass and stainless steel foam head ensuring consistent foam quality. The MTM Hydro PF22.2 offers multiple adjustments: spray pattern from round to flat, horizontal or vertical flat spray direction, and water/chemical mix concentration. A stable, tipping-resistant design improves on its predecessor, the PF22. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive research and rigorous tests, we proudly offer the MTM Hydro PF22.2 as our first Italian-made professional foam cannon model for pressure washers. It meets all practical demands we value. With compatible adapters (expanded continuously), it fits most hobby and professional pressure washers. The MTM Hydro PF22.2 produces excellent foam even with low-viscosity APC cleaners for versatile use. It efficiently foams even at low concentrate levels, enabling economical and eco-friendly vehicle cleaning. Our tests also prove superior material quality and craftsmanship, far exceeding Asian counterfeits. If parts wear or break, suitable replacements are available in our range. MTM Hydro PF22.2 Foam Lance Variants Available ready to use with various adapters or adaptable via a 1/4" screw thread. Need help with the correct adapter? We’re happy to assist. Premium Italian-made foam lance Patented foam generation technology Tip-resistant design with filling scale Adapters for Kränzle, Nilfisk, and Kärcher included

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon!The MTM Hydro PF22.3 is a professional foam cannon for pressure washers made in Italy. It operates up to 200 bar with a water flow of 11.5 l/min. With a 1000ml tank, it holds more foam solution than most competitors. Foam generation and delivery are controlled via flow and suction through the brass and stainless steel foam head. The MTM Hydro PF22.3 features multiple adjustments: spray pattern from round to flat, flat spray direction horizontal or vertical, and water/chemical mix concentration. This model is an upgrade from the PF22.2 with a large filling opening. An upgrade kit for PF22 and PF22.2 owners is also available.The MTM Hydro comes ready to use with various adapters or can be fitted with a 1/4" thread adapter. Need help choosing the right adapter? We're here to assist.Variants of the MTM Hydro PF22.3 Foam LanceAvailable preassembled with different adapters or adaptable via 1/4" thread. Contact us for adapter advice.High-quality Italian foam lance productionPatented foam generation technologyTip-resistant with fill level scaleAdapters for Kränzle, Nilfisk, KärcherWide Mouth Version 2024!!!MTM Hydro initially didn't plan to produce the Wide Mouth. The PF22.2 was originally innovated by the US importer, who developed an upgrade kit based on the GHF1 low-pressure garden hose foam cannon. After our request to make this an official MTM Hydro product, our Italian partners launched the PF22.3 and the upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon for high-pressure cleaners, made in Italy. The lance can be used with up to 200 bar and a water flow of 11.5 l/min. With a tank volume of 1,000 ml, the MTM PF22.3 holds more than most foam cannons from other manufacturers. The foam generation and dispensing occur through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.3 features multiple adjustable settings. You can adjust the spray pattern from round to flat, the direction of the flat spray horizontally or vertically, and the concentration of the water/chemical mixture. The MTM Hydro PF22.3 is a development of the PF22.2, designed with a large filling opening. An upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro comes fully assembled with various adapters and is ready for use, or it can be adapted with a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. Different Versions of the PF22.3 Foam Lance from MTM Hydro The MTM Hydro is available fully assembled with various adapters and is ready to use or can be adapted with a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. High-quality foam lance from Italian production Patented technology for foam generation Tip-resistant with scale for filling Various adaptations for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024 !!! Initially, MTM Hydro did not intend to produce the so-called Wide Mouth variant. The "inventor" of the PF22.2 was - as far as we know - the US importer, who developed a corresponding retrofit kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (i.e., low pressure). At our urging to make this an official MTM Hydro product, our Italian friends eventually complied, leading to the creation of the PF22.3 and the offered upgrade kit.

MTM Hydro PF22.3 Wide Mouth Bottle Container 1000ml The original MTM Hydro replacement bottle for the PF22.3 Wide Mouth foam cannon is perfect for replacing damaged containers or quickly switching between different shampoos and snow foams. Delivered is the 1000ml bottle only, without lid, adapter, or foam cannon. Original MTM Hydro replacement container Compatible with PF22.3 Wide Mouth foam cannon 1000ml capacity Ideal for quick chemical changes Delivered without lid or accessories

MTM Hydro PF22.3 Wide Mouth Cap Screw Lid with GasketThe original MTM Hydro Wide Mouth Screw Lid is the perfect replacement part for the PF22.3 foam cannon. This lid features the adapter for connecting the foam head and comes with the matching gasket included. Ideal as a replacement for damage or wear.Original MTM Hydro replacement lidFits PF22.3 Wide MouthIncludes foam head connection adapterGasket includedDelivered without bottle and foam head

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon!The MTM Hydro PF22.3 is a professional foam cannon for high-pressure washers, made in Italy. It can handle up to 200 bar pressure and a water flow of 11.5 l/min. With a 1000 ml tank, it holds more than most other foam cannons. Foam generation and delivery operate via flow and suction through the brass and stainless steel foam head. The PF22.3 offers multiple adjustments: spray pattern from round to flat, flat spray direction horizontal or vertical, and water/chemical mix concentration. It's an evolution of the PF22.2 featuring a large filling opening. An upgrade kit for PF22 and PF22.2 users is also available.The MTM Hydro comes ready-to-use with various adapters or can be adapted via 1/4 thread. We're happy to assist with adapter selection.MTM Hydro PF22.3 Foam Lance VariantsAvailable pre-assembled with different adapters or DIY via 1/4 thread. Contact us for help choosing the right adapter.Premium Italian-made foam lancePatented foam generation technologyTip-resistant with fill level scaleAdapters for Kränzle, Nilfisk, and Kärcher2024 Wide Mouth version!!!MTM Hydro initially didn’t plan to produce the Wide Mouth. The PF22.2 was originally developed by the US importer, who created a conversion kit based on the GHF1 low-pressure garden hose foam cannon. After our insistence to make it an official MTM Hydro product, the Italian team launched the PF22.3 and upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon!The MTM Hydro PF22.3 is a professional foam cannon for pressure washers made in Italy. The lance handles up to 200 bar and a water flow of 11.5 l/min. With a 1000 ml tank, it holds more foam solution than most other brands. Foam generation and delivery occur via flow and suction through the brass and stainless steel foam head. The PF22.3 offers multiple adjustments: spray pattern from round to flat, flat spray direction horizontal or vertical, and water/chemical mix concentration. It’s an upgrade from the PF22.2, featuring a large filling opening. Upgrade kits for PF22 and PF22.2 owners available.MTM Hydro is ready to use with various adapters mounted or can be adapted via 1/4 thread. Contact us for adapter advice.Available Versions of MTM Hydro PF22.3 Foam LanceComes pre-assembled with adapters or adaptable with 1/4 screw thread. We're happy to help with the right adapter.Premium foam lance made in ItalyPatented foam generation technologyTip-proof design with fill scaleAdapters for Kränzle, Nilfisk, and KärcherWide Mouth Version 2024!!!Originally, MTM Hydro didn’t plan to make the Wide Mouth version. The "inventor" was the US importer who developed a conversion kit based on the GHF1 low-pressure garden hose foam cannon for the PF22.2. Due to our push for this to be official MTM Hydro product, the PF22.3 and the upgrade kit were created by our Italian partners.

Exclusive at Chemical-Shark.de - MTM Hydro PF22.3 Wide Mouth Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon for high-pressure cleaners, made in Italy. It operates up to 200 bar with a water flow of 11.5 l/min. With a generous 1,000 ml tank, it holds more foam solution than most competitors. Foam generation and delivery are achieved through a brass and stainless steel foam head using flow and suction. The PF22.3 offers many adjustment options: spray pattern from round to flat, horizontal or vertical flat spray direction, and water/chemicals concentration settings. It’s an advanced version of the PF22.2 featuring a large filling opening. An upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro comes ready to use with various adapters or can be adapted using a 1/4” screw thread. We’re happy to assist you in choosing the right adapter. Different Versions of the MTM Hydro PF22.3 Foam Lance Available fully assembled with adapters for Kärcher, Nilfisk, and Kränzle, or adaptable with a 1/4” thread. Contact us for adapter support. Premium Italian-made foam lance Patented foam generation technology Tilt-proof with filling scale Adapters for Kränzle, Nilfisk, and Kärcher included 2024 Wide Mouth Version!!! Originally, MTM Hydro didn’t plan to produce the Wide Mouth version. The PF22.2 was reportedly innovated by the US importer who developed a retrofit kit based on the GHF1 low-pressure garden hose foam cannon. After urging to make it official, our Italian partners launched the PF22.3 and the upgrade kit offered here.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon for pressure washers, made in Italy. It operates up to 200 bar with a water flow of 11.5 l/min. The MTM PF22.3 tank holds 1000 ml, more than most other foam cannons. Foam generation and dispensing are done via flow and suction through a brass and stainless steel foam head. The MTM Hydro PF22.3 offers many adjustment options: spray pattern from round to flat, flat spray direction horizontal or vertical, and water/chemical mix concentration. Developed from the PF22.2, it features a wide filling opening. An upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro comes pre-assembled with various adapters, ready to use, or can be fitted with a 1/4 screw thread adapter. For help selecting the right adapter, we're happy to assist. MTM Hydro PF22.3 Foam Lance Variants The MTM Hydro is delivered ready-to-use with different adapters or can be adapted by yourself using the 1/4 screw thread. Need advice on adapters? We’re here to help. Premium Italian-made foam lance Patented foam generation technology Tilt-proof with fill level scale Adapters available for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024!!! MTM Hydro originally didn’t plan to produce the Wide Mouth version. The PF22.2 "inventor" was reportedly the US importer who developed an upgrade kit for the PF22.2 based on the new GHF1, a garden hose foam cannon (low pressure). After our insistence to make this an official MTM Hydro product, our Italian friends released the PF22.3 and the upgrade kit offered here.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon for high-pressure cleaners, crafted in Italy. It operates at up to 200 bar with a water flow of 11.5 l/min. With a 1,000 ml tank, the MTM PF22.3 holds more than most foam cannons from other brands. Foam generation and delivery occur through a brass and stainless steel foam head via flow and suction. The PF22.3 offers multiple adjustments: spray pattern from round to flat, flat spray direction horizontally or vertically, and water/chemical mix concentration. Designed as an upgrade to the PF22.2, it includes a large filling opening. An upgrade kit for PF22 and PF22.2 owners is also available. MTM Hydro is delivered fully assembled with various adapters or can be adapted by the user with a 1/4 screw thread. If you need help choosing the right adapter, we’re happy to assist. Versions of the MTM Hydro PF22.3 Foam Lance Delivered ready to use with different adapters or adaptable by yourself via 1/4 screw thread. Contact us for adapter advice. Premium Italian-made foam lance Patented foam generation technology Tilt-resistant with fill level scale Adapters available for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024! Originally, MTM Hydro did not plan to produce the Wide Mouth version. The PF22.2 was invented by a US importer who developed a conversion kit based on the new GHF1 low-pressure garden hose foam cannon. After our request to make it an official MTM Hydro product, our Italian partners created the PF22.3 and the upgrade kit offered here.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon!The MTM Hydro PF22.3 is a professional foam cannon for high-pressure washers made in Italy. It handles up to 200 bar and a water flow of 11.5 l/min. The 1000 ml tank holds more than most foam cannons from other brands. Foam generation and delivery happen through a brass and stainless steel foam head by flow and suction. The MTM Hydro PF22.3 offers multiple adjustments: spray pattern from round to flat, flat spray direction horizontal or vertical, and water/chemical mix concentration. It's an upgrade of the PF22.2 with a large filling opening. An upgrade kit for PF22 and PF22.2 owners is also available.The MTM Hydro comes either pre-assembled with various adapters for immediate use or can be adapted with a 1/4 threaded screw. Contact us if you need help choosing the right adapter.Variants of the MTM Hydro PF22.3 Foam LanceThe MTM Hydro can be delivered ready to use with various adapters or adapted by yourself with 1/4 screw thread. We are happy to assist with adapter questions.Premium foam lance made in ItalyPatented foam generating technologyTip-resistant with filling scaleVarious adapters for Kränzle, Nilfisk, and KärcherWide Mouth Version 2024!!!MTM Hydro originally did not plan to produce the so-called Wide Mouth. The "inventor" of the PF22.2 was reportedly the US importer who, inspired by the new GHF1 foam cannon for garden hoses (low pressure), developed a retrofit kit for the PF22.2. After our insistence to make it an official MTM Hydro product, our Italian partners created the PF22.3 and the offered upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth Upgrade Kit for the MTM Hydro PF22.2 Foam Cannon! The PF22.2 foam cannon took its time to arrive in the German market. We were the only ones daring to tackle this. The challenge was the complex adapter setup since MTM Hydro doesn’t offer their own quick connect adapters. After months of building a solid partnership with MTM Hydro, we now proudly add the PF22.3 upgrade kit with a wider opening - Wide Mouth - to our lineup. MTM Hydro PF22.3 Wide Mouth Upgrade Kit Upgrade kit including adapter and wide-mouth bottle Perfect for existing PF22.2 and PF22.1 users Original MTM Hydro - Made in Italy MTM Hydro originally didn’t plan to produce the Wide Mouth version. The PF22.3 was actually invented by the US importer, based on the new GHF1 foam cannon for garden hoses (low pressure), who developed this conversion kit for the PF22.2 cannon. After many requests to make it an official MTM Hydro product, our Italian partners followed suit, creating the PF22.3 and its upgrade kit.

MTM Hydro Rubber Coated Pressure Washer Nozzle with 1/4" Quick Connect The MTM Hydro rubber coated pressure washer nozzle delivers professional cleaning power while protecting sensitive surfaces. Its durable rubber coating reduces the risk of scratches or damage when accidentally contacting paint, rims, or delicate surfaces. Equipped with a 1/4" Quick Connect fitting, it’s perfect for professional pressure washer setups in car detailing, valeting, and commercial use. Available in black, red, blue, plus a premium Acqualine azurro version. Rubber coated high-pressure nozzle by MTM Hydro Includes 1/4" Quick Connect fitting Colors: black, red, blue, Acqualine azurro Selectable spray angles: 15°, 25°, 40°, 60° Options with 035 or 040 Orifice Rubber protection minimizes surface contact risk Ideal for professional car care and pressure washing Choose the Perfect Spray Angle for Every Task Select the spray fan depending on your cleaning needs. The angle affects pressure impact and water coverage drastically. 15°: Narrow, powerful fan for tough dirt removal 25°: Versatile all-round angle ideal for vehicle wash and pre-cleaning 40°: Wide fan for gentle rinsing of delicate surfaces 60°: Extra-wide water spread for soft rinsing and max coverage Installation Tips Components come for self-assembly. Use appropriate sealing materials like Teflon tape or thread sealant to ensure a tight, pressure-stable connection. This allows perfect fitting to your setup. What Does Orifice Size Mean? The orifice size affects nozzle opening, working pressure, and water flow. Smaller orifices increase pressure; larger ones allow more water with less backpressure. 035 (3.5 Orifice): Recommended for pressure washers with approx. 5–8 l/min water flow 040 (4.0 Orifice): Recommended for pressure washers with approx. 9–15 l/min water flow Perfect for Professional Pressure Washer Setups MTM Hydro pressure washer nozzles pair perfectly with MTM Hydro guns, lances, and Quick Connect systems. The rubber coating plus precise water guidance ensures top performance, ergonomics, and paint protection.

MTM Hydro Rubberized Pressure Washer Nozzle with 1/4" Quick Connect The MTM Hydro rubberized pressure washer nozzle combines professional cleaning power with optimal surface protection. Thanks to its sturdy rubber coating, the risk of scratches or damage from accidental contact with paint, rims, or delicate surfaces is minimized. Equipped with a 1/4" Quick Connect fitting, it’s perfect for professional pressure washer setups in car care, detailing, and commercial use. Available in black, red, blue, and premium Acqualine azurro. Rubberized pressure washer nozzle from MTM Hydro With 1/4" Quick Connect fitting Colors: black, red, blue, Acqualine azurro Select spray angles: 15°, 25°, 40°, 60° Choice of 035 or 040 Orifice Rubber cover reduces risk of surface damage Perfect for professional car care and pressure cleaning Various Spray Angles for Every Task Pick the ideal spray fan depending on your cleaning job. Spray angle significantly affects pressure impact and water distribution. 15°: Narrow, powerful fan for tough dirt removal 25°: Versatile all-round angle for car washing and pre-cleaning 40°: Wide fan for gentle rinsing of sensitive surfaces 60°: Extra-wide coverage for soft rinsing and maximum area coverage Installation Tip The parts come for self-assembly. For a secure, pressure-proof connection, use suitable sealant like Teflon tape or a proper thread seal. This ensures the nozzle fits perfectly into your setup. What’s the Orifice Size? The orifice size defines the nozzle opening and affects operating pressure and water flow. Smaller orifices increase pressure; larger ones allow more water with less backpressure. 035 (3.5 Orifice): Recommended for pressure washers with ~5–8 l/min flow 040 (4.0 Orifice): Recommended for pressure washers with ~9–15 l/min flow Perfect for Professional Pressure Washer Setups The MTM Hydro pressure washer nozzles pair perfectly with MTM Hydro guns, lances, and Quick Connect systems. Thanks to the rubberized shell and precise water guidance, they deliver top performance, ergonomics, and paint protection.

MTM Hydro Rubberized Pressure Washer Nozzle with 1/4" Quick ConnectThe MTM Hydro rubberized pressure washer nozzle combines professional cleaning power with optimal surface protection. Thanks to its robust rubber coating, the risk of scratches or damage from accidental contact with paint, rims, or sensitive surfaces is significantly reduced. Equipped with a 1/4" Quick Connect fitting, it’s perfect for professional pressure washer setups in car care, detailing, and commercial use. Available in black, red, blue and premium Acqualine azurro variants.Rubber-coated high-pressure nozzle by MTM HydroFeatures 1/4" Quick Connect fittingColors: black, red, blue, Acqualine azurroSelect spray angles: 15°, 25°, 40°, 60°Available with 035 or 040 OrificeRubber protection reduces surface contact riskPerfect for professional car care and pressure washingSpray Angles Tailored for Every JobChoose the ideal spray fan depending on your cleaning task – spray angle significantly affects pressure and water distribution.15°: Narrow, powerful fan for tough dirt removal25°: Versatile all-round spray ideal for car washing and pre-cleaning40°: Wide fan for gentle rinsing of delicate surfaces60°: Extra-wide water spread for soft rinsing and maximum coverageInstallation NoteComponents are delivered for self-assembly. For a secure, pressure-tight connection, use suitable sealants like Teflon tape or compatible thread seals. This ensures the nozzle fits perfectly into your custom setup.What Does Orifice Size Mean?The orifice size refers to the nozzle opening and influences working pressure and water flow. Smaller orifices increase pressure, larger ones boost water volume while lowering backpressure.035 (3.5 Orifice): Recommended for pressure washers with approx. 5–8 l/min water flow040 (4.0 Orifice): Recommended for pressure washers with approx. 9–15 l/min water flowPerfect for Pro Pressure Washer SetupsThe MTM Hydro pressure washer nozzles are the ideal match with MTM Hydro guns, lances, and Quick Connect systems. Their rubberized exterior and precise water flow deliver top-notch performance, ergonomics, and paint protection.

MTM Hydro Rubberized Pressure Washer Nozzle with 1/4" Quick Connect The MTM Hydro rubberized pressure washer nozzle combines professional cleaning power with optimal surface protection. Thanks to its robust rubber coating, the risk of scratches or damage from accidental contact with paint, rims, or sensitive surfaces is minimized. Equipped with a 1/4" Quick Connect fitting, it’s perfect for professional pressure washer setups used in car detailing, preparation, and commercial applications. Available in black, red, blue and premium Acqualine azurro versions. Rubber-coated high-pressure nozzle by MTM Hydro Features 1/4" Quick Connect fitting Colors: black, red, blue, Acqualine azurro Selectable spray angles: 15°, 25°, 40°, 60° Available with 035 or 040 Orifice Rubber protection reduces surface contact risk Ideal for professional car care and pressure washing Choose the Perfect Spray Angle for Every Job Select your spray fan based on the cleaning task. Spray angle greatly affects pressure performance and water coverage. 15°: Narrow, powerful spray for tough, stubborn dirt 25°: Versatile all-rounder for car washes and pre-cleaning 40°: Wide fan for gentle rinsing of sensitive surfaces 60°: Extra-wide water distribution for gentle flush and maximum coverage Mounting Notice Components come ready for self-assembly. For a safe, leak-proof connection, use appropriate sealant like Teflon tape or a suitable thread gasket. This ensures optimal setup and safe installation. What Does Orifice Size Mean? The orifice size refers to the nozzle opening, impacting working pressure and water flow. Smaller orifices create higher pressure, larger ones increase water volume and reduce back pressure. 035 (3.5 Orifice): Recommended for pressure washers with approx. 5–8 l/min flow rate 040 (4.0 Orifice): Recommended for units with approx. 9–15 l/min flow rate Perfect for Professional Pressure Washer Setups MTM Hydro pressure washer nozzles are ideal when paired with MTM Hydro guns, lances, and quick connect systems. Their rubber coating and precise water guidance deliver outstanding performance, ergonomics, and paint protection.

MTM Hydro Pressure Washer Nozzle Soft-Coated with 1/4" Quick ConnectThe MTM Hydro Pressure Washer Nozzle Soft-Coated delivers professional cleaning power while protecting surfaces. Its durable rubber coating minimizes scratch risks during accidental contact with paint, rims, or sensitive surfaces. Featuring a 1/4" Quick Connect tip, it's perfect for professional pressure washer setups in vehicle detailing, care, and commercial use. Available in black, red, blue and the premium Acqualine azurro finish.Rubber-coated pressure washer nozzle by MTM Hydro1/4" Quick Connect tipColors: black, red, blue, Acqualine azurroSelectable spray angles: 15°, 25°, 40°, 60°Available with 035 or 040 OrificeRubber guard reduces surface contact riskIdeal for professional vehicle care and pressure washingSpray Angles Tailored to Every TaskChoose the perfect fan angle depending on your cleaning job. Spray angle greatly impacts pressure and water distribution.15°: Narrow, powerful fan for tackling tough dirt25°: Versatile all-round spray for washing and pre-cleaning vehicles40°: Wider fan for gentle rinsing of sensitive surfaces60°: Extra-wide water spread for soft rinsing and max area coverageAssembly NoteComponents are self-assembly. For a secure, pressure-tight connection, use suitable sealant such as PTFE tape or appropriate thread seal. This ensures optimal fit and durability in your setup.What Does Orifice Size Mean?The Orifice size defines the nozzle opening, impacting working pressure and water flow. Smaller orifices increase pressure; larger orifices allow more water with reduced back pressure.035 (3.5 Orifice): Recommended for pressure washers with approx. 5–8 l/min water flow040 (4.0 Orifice): Recommended for pressure washers delivering about 9–15 l/min water flowPerfect for Pro Pressure Washer SetupsMTM Hydro pressure washer nozzles pair perfectly with MTM Hydro guns, lances, and Quick Connect systems. The rubber exterior and precise water flow combine power, ergonomics, and paint protection perfectly.

The MTM PF22.2 replacement container is designed as a spare part for the MTM Hydro PF22.2 foam lances but also fits existing MTM Hydro PF22 foam lances or any other foam lance with the same thread. The highlight: the container is tip-resistant, making it perfect for filling and storage. Original MTM Hydro spare part Compatible with MTM Hydro PF22 foam lances (1st generation) among others Tip-resistant design with fill scale

Stainless steel wool for foam generation, replacement insert for MTM Hydro PF22 foam lances. MTM Hydro original spare part Compatible with MTM Hydro PF22 foam lances and more Made of stainless steel

MTM Hydro rubber-coated impact protector for high-pressure lances. Perfectly compatible with DP Pro QuickConnect couplings on MTM Hydro ILS or RLS lances. Made from premium rubber for durable protection. MTM Hydro Rubber-Coated Impact Protector for High-Pressure Lances Quick Connect Rubber-coated impact protector for Quick Connect couplings Perfect for MTM Hydro ILS / RLS high-pressure lances High-quality rubber coating for enhanced durability

MTM Hydro Rubber-Coated High-Pressure Nozzle with 1/4" Quick Connect The MTM Hydro rubber-coated pressure nozzle combines professional cleaning power with optimal surface protection. Its robust rubber coating reduces the risk of scratches or damage from accidental contact with paint, rims, or sensitive surfaces. Equipped with a 1/4" Quick Connect fitting, it’s perfect for professional pressure washer setups in car care, detailing, and commercial use. Available in black, red, blue, and premium Acqualine azurro. Rubber-coated high-pressure nozzle from MTM Hydro Features 1/4" Quick Connect fitting Colors: black, red, blue, Acqualine azurro Selectable spray angles: 15°, 25°, 40°, 60° Available with 035 or 040 Orifice Rubber protection minimizes risk of surface contact damage Perfect for professional car care and pressure washing Spray Angles Tailored to Every Task Choose the right fan angle to suit your cleaning needs. Spray angle significantly affects pressure impact and water distribution. 15°: Narrow, powerful spray for tough, stubborn dirt 25°: Versatile all-round angle for vehicle wash and pre-cleaning 40°: Wide fan for gentle rinsing of delicate surfaces 60°: Extra-wide coverage for soft rinsing and max surface area Assembly Note The components are supplied for self-installation. Use suitable sealants like PTFE tape or proper thread seal to ensure a secure, leak-free connection. This allows optimal integration into your specific setup. What Does Orifice Size Mean? The orifice size defines the nozzle opening, affecting working pressure and water flow. Smaller orifices create higher pressure; larger ones allow greater water volume, reducing counterpressure. 035 (3.5 Orifice): Ideal for pressure washers with approx. 5–8 l/min flow 040 (4.0 Orifice): Ideal for pressure washers with approx. 9–15 l/min flow Designed for Professional Pressure Washing Setups MTM Hydro pressure nozzles pair perfectly with MTM Hydro guns, lances, and quick connect systems. Their rubberized exterior and precise water flow provide an excellent balance of performance, ergonomics, and paint protection.

MTM Hydro Rubber-Coated High-Pressure Washer Nozzle with 1/4" Quick Connect The MTM Hydro rubber-coated pressure washer nozzle delivers professional cleaning power while protecting your surfaces. Thanks to the robust rubber coating, the risk of scratches or damage to paint, rims, or sensitive surfaces is minimized during accidental contact. This nozzle features a 1/4" Quick Connect fitting and is perfect for professional pressure washer setups in car detailing, preparation, and commercial use. Available in black, red, blue, as well as the premium Acqualine azurro variant. Rubber-coated high-pressure nozzle by MTM Hydro Equipped with 1/4" Quick Connect fitting Colors: black, red, blue, Acqualine azurro Selectable spray angles: 15°, 25°, 40°, 60° Available with 035 or 040 Orifice Rubber protection reduces surface contact risk Ideal for professional vehicle care and pressure washing Choose the Perfect Spray Angle for Every Task Select the appropriate fan angle depending on your cleaning needs. The spray angle greatly affects pressure impact and water coverage. 15°: Narrow, powerful fan for intensive cleaning of stubborn dirt 25°: Versatile all-round angle for vehicle washing and pre-cleaning 40°: Wide fan for gentle rinsing of delicate surfaces 60°: Extra wide water distribution for gentle rinsing and maximum area coverage Mounting Instructions Components are delivered for self-assembly. For a secure, pressure-tight connection, use suitable sealants such as Teflon tape or compatible thread seals. This ensures optimal alignment and mounting to your specific setup. What Does the Orifice Size Mean? The orifice size defines the nozzle opening and influences working pressure and water flow. Smaller orifices generate higher pressure; larger ones allow more water flow and reduce backpressure. 035 (3.5 Orifice): Recommended for pressure washers with approx. 5–8 l/min water flow 040 (4.0 Orifice): Recommended for pressure washers with approx. 9–15 l/min water flow Perfect for Professional Pressure Washer Setups The MTM Hydro pressure washer nozzles pair perfectly with MTM Hydro guns, lances, and Quick Connect systems. Their rubber coating and precise water guidance offer an excellent balance of performance, ergonomics, and paint protection.

MTM Hydro Rubber-Coated Pressure Washer Nozzle with 1/4" Quick Connect The MTM Hydro rubber-coated pressure washer nozzle delivers professional cleaning power while protecting delicate surfaces. Its sturdy rubber housing minimizes the risk of scratches or damage when accidentally contacting paint, rims, or sensitive areas. Equipped with a 1/4" Quick Connect fitting, it’s perfect for pro pressure washer setups in vehicle detailing, prep, and commercial use. Available in black, red, blue, plus the premium Acqualine azurro version. Rubber-coated pressure washer nozzle by MTM Hydro Includes 1/4" Quick Connect fitting Color options: black, red, blue, Acqualine azurro Selectable spray angles: 15°, 25°, 40°, 60° Available with 035 or 040 Orifice Rubber protection reduces surface contact risks Ideal for professional vehicle care and pressure washing Perfect Spray Angles for Every Task Choose the right fan spray depending on your cleaning needs. The spray angle significantly affects pressure impact and water coverage. 15°: Narrow, powerful water fan for tough, stubborn dirt 25°: Versatile all-around spray angle for vehicle washing and pre-cleaning 40°: Wider fan for gentle rinsing of sensitive surfaces 60°: Extra-wide water distribution for soft rinsing and max coverage Mounting Tips Components are delivered for self-assembly. Use appropriate sealants such as Teflon tape or thread seal rings to ensure a secure, leak-proof connection. This allows perfect adaptation and mounting to your specific setup. What Does Orifice Size Mean? The Orifice size defines the nozzle opening, influencing working pressure and water flow. Smaller orifices create higher pressure, larger ones allow more water flow with less backpressure. 035 (3.5 Orifice): Recommended for pressure washers with ~5–8 l/min water flow 040 (4.0 Orifice): Recommended for pressure washers with ~9–15 l/min water flow Ideal for Pro Pressure Washer Setups The MTM Hydro pressure washer nozzles perfectly complement MTM Hydro guns, lances, and Quick Connect systems. Their rubber coating and precise water control offer an excellent balance of power, ergonomics, and paint protection.

MTM Hydro Rubberized High-Pressure Nozzle with 1/4" Quick Connect The MTM Hydro rubberized high-pressure nozzle delivers professional cleaning power while protecting surfaces. Its robust rubber coating reduces the risk of scratches or damage on paint, rims, or sensitive surfaces during accidental contact. Equipped with a 1/4" Quick Connect fitting, it’s perfect for professional pressure washer setups in car care, detailing, and industrial use. Available in black, red, blue and premium Acqualine Azurro versions. Rubberized high-pressure nozzle by MTM Hydro Includes 1/4" Quick Connect fitting Colors: black, red, blue, Acqualine Azurro Selectable spray angles: 15°, 25°, 40°, 60° Options for 035 or 040 Orifice Rubber protection minimizes risk of surface contact damage Ideal for professional vehicle care and pressure washing Spray Angles for Every Task Choose the right spray fan depending on the cleaning job. Spray angle greatly affects pressure impact and water distribution. 15°: Narrow, powerful spray for intense cleaning of stubborn dirt 25°: Versatile all-round angle for vehicle washing and pre-cleaning 40°: Wide fan for gentle rinsing of sensitive surfaces 60°: Extra-wide coverage for soft rinsing and maximum surface area Assembly Notes Components are supplied for self-assembly. For secure, pressure-tight connections, use appropriate sealing materials like PTFE tape or suitable thread sealants. This ensures the nozzle fits perfectly to your setup. What Does Orifice Size Mean? The orifice size defines the nozzle opening and affects operating pressure and water flow. Smaller orifices generate more pressure; larger ones allow higher flow and lower back pressure. 035 (3.5 Orifice): Recommended for pressure washers with around 5–8 l/min water flow 040 (4.0 Orifice): Recommended for pressure washers with around 9–15 l/min water flow Perfect for Professional Pressure Washer Setups MTM Hydro high-pressure nozzles pair perfectly with MTM Hydro guns, lances, and Quick Connect systems. The rubberized exterior and precise water guidance offer an excellent mix of performance, ergonomics, and paint protection.