SONAX 125mm Hybrid Wool Cutting Pad Ø 130/143mm

While we can't say if the innovative RAGS TO RICHES™ microfiber towel detergent truly lives up to the meaning of "from rags to riches," we can assure you that it was developed by the giants of the detailing business: legendary detailer Renny Doyle, brand ambassador and product manager Levy Gates from The Rag Company, and brothers Dave and Bob Philips from P&S Detailing Products. The result is an effective product designed for washing microfiber towels, foam pads, cotton, and all other fabric blends. RAGS TO RICHES™ is a highly concentrated formula that can be used sparingly. Revitalize your high-quality microfiber towels: P&S Detailing Products | The Rag Company - RAGS TO RICHES™ RAGS TO RICHES™ can completely regenerate microfibers, eliminating typical dirt, residues from polishes, polymers, cleaners, and waxes from the fibers. The cleaning process restores the high water absorption of the fibers. Color and brightness are reset to original levels through a special color refreshing formula. Developed specifically for microfiber products, RAGS TO RICHES™ is also excellent for polishing pads and natural fibers from fur or wool. Dosage and Usage Recommendations For small wash loads and moderate dirtiness, one fluid ounce 30ml will suffice per wash. For larger wash loads and/or heavier dirt, usually two fluid ounces will be sufficient. RAGS TO RICHES™ is effective as a standalone detergent; no additional detergents are needed. Used towels can also be pre-cleaned directly in a cleaning solution of 20 liters with 1-2 fluid ounces 30-60ml. For cleaning polishing pads, a detergent/water solution of 10 liters and 2 fluid ounces 60ml can be used. RAGS TO RICHES™ has been certified by the product management and development team of the German manufacturer "Detail Passion" for their microfiber products.

3D ACA X-TRA 510 is a cutting-edge paint polish designed for Heavy Cut applications. This polish can be used with both rotary and dual-action polishers. As known from other 3D polishes, it has an extended working time. It works faster than the 3D 500 on severe paint defects. 3D 510 contains innovative 'Alpha Ceramic Alumina' abrasive particles, allowing for a significantly longer processing time. It is suitable for both soft single-layer paints and hard clear coats. 3D 510 is free from fillers and can be completely removed even with gentle paint degreasers. High Material Removal in No Time with 3D ACA X-TRA 510 3D 510 can be used both excentrically and rotationally, leaving a gloss finish typical for Heavy Cut polishes without dulling. Ideally, 3D 510 is used before a finishing polish like the 3D ACA X-TRA 520, 3D One Hybrid, or a comparable product. 3D ACA 510 becomes clear after a short processing time, allowing for good visibility on the paint. It features a very long working time and is economical due to the late breakdown of the abrasive particles into smaller fragments. Very Easy Application: 3D ACA X-TRA 510 3D 510 is solvent-free, kerosene-free, and filler-free. Despite its eco-friendly and user-friendly formulation, 3D 510 does not produce dust and can be easily wiped off. It is advisable to use 3D sparingly to avoid excess. We recommend using it with microfiber pads, wool pads, and hard to medium-soft foam pads. Thanks to its high viscosity, 3D 510 does not spray even at high RPMs.