Cleaning: Effective Solutions for a Clean Vehicle

Until now, rinseless washing methods had only pH-neutral products that couldn't remove mineral contaminants like limescale stains. These can not only affect the previously applied sealant protection but also be tough to remove, potentially causing damage to the car's clear coat that would necessitate polishing for restoration. Labocosmetica's Preludio Acidic has been specially formulated to eliminate these inorganic mineral contaminants. After a day of rain or snowfall, for instance, your car can accumulate significant amounts of inorganic dirt on its body, especially if it’s sandy rain. This happens because water leaves mineral deposits behind upon evaporation, which over time forms a challenging layer to remove. Preludio Acidic specifically targets inorganic mineral-based pollution requiring acidic pH treatment for dissolution and removal. Unlike neutral or alkaline cleaners, it is designed to effectively eliminate this type of dirt that tends to solidify on the surface. A neutral or alkaline product isn't sufficient to remove this microscopically fine mineral layer adhering to the paint, and here is where the strength of Preludio Acidic is crucial.

Previously, rinseless washing methods only had pH-neutral products that could only soften dirt but not dissolve it. Labocosmetica's Preludio Alkaline has been developed to effectively tackle various organic contaminants that accumulate on vehicle surfaces such as road grime, brake dust, insect residues, smog deposits, exhaust gases, fuel traces, and even challenging stains like bird droppings that a neutral product struggles to remove or takes longer to clean. Thanks to its alkaline nature, Preludio Alkaline is capable of quickly, safely, and gently dissolving and removing organic substances while maintaining the paint's quality, achieving a deep and long-lasting clean.

#PRIMUS by Labocosmetica is an alkaline pre-cleaner that can also be used as a foam cleaner. Even without mechanical action, #PRIMUS effectively removes insect residues, resin and tar deposits, and stubborn road grime. It can be applied to all materials of the vehicle exterior. The pre-cleaner is suitable for use on cars, motorcycles, and all other vehicles. The VDA-Certified Pre-Cleaner with Alkaline Formula #PRIMUS is certified by the German Automotive Association (VDA) and can be safely used as a cleaning agent on all materials. The alkaline formula is free from caustic salts and can also be used for cleaning waxed surfaces in mild doses. #PRIMUS does not attack existing long-term sealants but is capable of regenerating them through dirt dissolution.

Limescale and other mineral deposits on car paint hinder the hydrophobic and water-repellent effects of ceramic coatings. Regular gentle demineralization is essential to restore water repellency and eliminate clouding, especially on dark paint colors. This is where #PURIFICA from Labocosmetica comes into play. This cleaning shampoo features a controllable low, acidic pH level, serving as the foundation for gentle demineralization during vehicle washing. Regularly Remove Acid Rain, Limescale Residues, and Mineral Deposits while Car Washing #PURIFICA contains special acids that dissolve typical deposits from the paint and other exterior surfaces during car washing, facilitating easy rinsing. The shampoo is highly concentrated and should be diluted 1:60 for regular washes every 6,000 km or 1:10 for heavier mineral contamination.

#REVITAX is a "Wash & Coat" shampoo that creates a seal on the surface while hand washing the vehicle. Despite its pH-neutral formula, it is highly effective in cleaning and easily removes common dirt. With repeated use of #REVITA, the high dirt and water-repellency effect becomes particularly noticeable. Each wash makes the car easier to clean. Cost-effective application, streak-free: #REVITA from Labocosmetica #REVITA, unlike many other products with similar claims, is based on dissolved siloxanes that create a strong bond with the car paint. This gives the vehicle a high gloss, extreme paint smoothness, and excellent dirt repellency. Despite its hydrophobic property, #REVITA produces a good foam that allows dirt to be gently removed with a wash mitt. #REVITA leaves no annoying streaks or stripes when promptly rinsed off. Unwanted residues can easily be removed with the Labocosmetica Quick Detailer #PERFECTA if needed. #REVITA is a concentrate and can be used at a 1:100 to 1:200 ratio, which means 50 to 100ml for a 10-liter wash bucket.

Labocosmetica SEMPER is a pH-neutral car shampoo that creates a very reliable lubricating film, allowing for a gentle vehicle wash. The formulation is completely safe for existing coatings, whether they are ceramic coatings, synthetic sealants, or natural waxes. The product rinses off completely without leaving streaks or spots. Highly concentrated with reliable lubricating film pH-neutral, innovative formulation Compatible with ceramic coatings, waxes, and sealants

Labocosmetica TEXIA – Fabric Cleaner for Upholstery & Carpets Labocosmetica TEXIA is a powerful fabric cleaner specifically designed for deep cleaning fabric upholstery, carpets, and textile surfaces in the vehicle interior. Its innovative formula effectively removes dirt, stains, and unpleasant odors without damaging or bleaching the fibers. Effective cleaning for upholstery, carpets, and textiles Reliably dissolves stubborn stains and contaminants Neutralizes unpleasant odors and ensures freshness Gentle formula – does not harm fibers and preserves colors Ideal for detailers and private users Thorough Cleaning for Interiors TEXIA penetrates deep into the fibers to remove everyday dirt as well as stubborn stains. Whether for seats, carpets, or headliners – this product provides a visible refresh and hygienic cleanliness throughout the entire interior. Freshness & Protection for Textiles The special formulation neutralizes odors and leaves a pleasant freshness without residues. At the same time, the original structure of the fabrics is preserved, allowing the materials to appear well-maintained for longer. Labocosmetica TEXIA – the professional solution for clean, fresh, and well-maintained textile surfaces in the vehicle interior.

Labocosmetica VARIUS – APC All-Purpose Cleaner Labocosmetica VARIUS is a versatile all-purpose cleaner (APC), developed for thorough cleaning of various vehicle surfaces both inside and outside. The innovative formula effectively removes dirt, grease, and organic residues without damaging delicate materials. Universally applicable all-purpose cleaner for interior and exterior surfaces Effective against grease, oil, dust, and organic soiling Suitable for plastics, textiles, leather, rubber, and painted surfaces High cleaning power while being gentle on materials Ideal for professional detailers and private users Versatile Application VARIUS is a true all-rounder in vehicle care: Inside, it ensures clean upholstery, carpets, plastics, and leather; outside, it reliably removes dirt from rubber, plastic parts, or painted surfaces. Thanks to its strong cleaning power, it can be flexibly used in different dilutions. Cleanliness Without Compromise With its balanced formula, VARIUS offers an excellent combination of efficiency and material protection. Surfaces are thoroughly cleaned without leaving residues or altering the material structure. Labocosmetica VARIUS – the reliable all-purpose cleaner for any use, from quick interior cleaning to thorough exterior care.

Ledermax LMX Applicator Sponge for Leather Care In addition to the well-known cleaning sponge, the Austrian specialist for leather care also offers a dedicated applicator sponge. The Ledermax LMX Applicator is designed for use with the Ledermax LMX Conditioner #2.0, allowing for a super-thin application of high-quality, highly efficient leather care with sealing, anti-wrinkle, anti-soiling, UV protection, and abrasion resistance. With this sponge, Ledermax enables an extremely economical use of its leather and synthetic leather care, focusing on sustainability and resource conservation.

Ledermax LMX Cleaning Sponge for Leather Care For leather cleaning, the Austrian specialist in leather care relies on the use of sponges. This abrasive cleaning sponge is equally absorbent, releasing cleaning emulsion, abrasive to dirt, and gentle on the top coat. Especially when cleaning heavily soiled leather, it's effective to loosen and simultaneously transport away the dirt with a sponge. For this purpose, the leather guru Herwig Grabner developed a unique foam structure. The Ledermax LMX cleaning sponge is specifically designed for use with Ledermax LMX Cleaner #1.0 and #1.1 but can also be used with other products.

Ledermax LMX Cleaning Sponge for Leather Care For leather cleaning, the Austrian specialist for leather care relies on sponges. This abrasive cleaning sponge is highly absorbent, releasing cleaning emulsion, abrasive against dirt, and gentle on the top coat. When dealing with heavily soiled leather, it makes sense to loosen the dirt with a sponge while simultaneously removing it. To achieve this, leather guru Herwig Grabner developed a unique foam structure. The Ledermax LMX cleaning sponge is specifically designed for use with Ledermax LMX cleaner #1.0 and #1.1, but can also be used with other products.

Ledermax LMX Leather Care Applicator Sponge In addition to the well-known cleaning sponge, the Austrian specialist for leather care also offers its own applicator sponge for leather care. The Ledermax LMX Applicator Sponge is designed for use with Ledermax LMX Conditioner #2.0, allowing for ultra-thin application of high-quality and highly economical leather care with sealing, anti-wrinkle, anti-soiling, UV protection, and abrasion protection. With this sponge, Ledermax enables exceptionally economical use of its own leather and synthetic leather care products, focusing on sustainability and resource conservation.

Lilly Brush Mini Pet Hair Detailer – Compact Dog & Pet Hair Remover for Car, Carpet & Sofa The Lilly Brush Mini Pet Hair Detailer is the perfect pet hair remover for anyone looking to effectively remove dog and cat hair from textile surfaces. Especially in the car, pet hair embeds deep into seat upholstery, carpets, mats, and trunks. This compact detailer excels at lifting even stubborn dog hair out of the fabric instead of just picking it up superficially. Compact pet hair remover for car, sofa & carpet Perfect for seats, seams, corners & hard-to-reach areas Thoroughly removes dog & cat hair from textile fibers Ideal for car detailing and pet owners Thanks to its special edge design, pet hair is bundled and lifted from the fabric as you brush over. Especially during heavy shedding or change of coat, the Mini Pet Hair Detailer saves significant time compared to conventional lint rollers or vacuum cleaners. It’s ideal for targeted cleaning inside your vehicle, on sofas, or household carpets. Its handy size ensures it’s always ready to use and fits easily into your glove compartment or detailing bag. For larger areas like full car seats, rear benches, or big carpet sections, check out the Lilly Brush Pro Pet Hair Tool Kit with a bigger working surface.

LUMINUS Mint Car Shampoo pH-neutral 500ml – subtle freshness for vehicle washing. This gentle, specialized car shampoo is designed to effectively dissolve dirt without attacking clear coats, sealants, or coatings. The pH-neutral approach ensures a particularly gentle cleaning, making it ideal for sensitive paint layers. pH-neutral – perfect for coated paints Fine, rich foam formation Effectively removes dirt, dust, and insect residues Mild formulation – free from aggressive surfactants Very high concentration – particularly economical in usage Dosage: approx. 10ml for normal dirt, approx. 20ml for heavy dirt (each for 10l of water) Also suitable for foam lances and foam sprayers Gentle Care with a Fresh Note The foam formation gently lifts dirt particles, allowing them to be rinsed off effortlessly – without rubbing. The refreshing mint scent enhances the cleaning experience subtly but not overpoweringly. Ideal for those who maintain paint protection systems and rely on high-quality car care products – whether with classic hand washing or using foam technology.

LUMINUS Pairway Paint Cleaner Primer – Perfect Prep for Maximum Shine The LUMINUS Pairway Paint Cleaner Primer is the ideal solution for thorough preparation of painted surfaces before applying waxes, sealants, or ceramic coatings. Its specially formulated blend reliably removes old wax layers, sealant residues, and light contaminants, ensuring a clean, perfectly adherent paint surface. The result: significantly improved durability and performance of the subsequent protective layer. Eliminates old waxes, sealants, and light residues Optimizes paint surface for sealants and coatings Ensures maximum adhesion of follow-up products Enhances gloss and color depth of the paint Easy and safe application Effective Deep Cleaning Without Unnecessary Material Removal The Pairway Paint Cleaner works gently yet effectively. It removes unwanted residues without stressing the paint unnecessarily, making it perfect for regular maintenance and as a prep step before detailed work. The surface is smoothed and gains a noticeably clean, even texture, creating ideal conditions for protective products. Perfect Base for Wax, Sealants & Ceramic Coatings Only on a perfectly cleaned surface can sealants unleash their full potential. The LUMINUS Pairway Primer ensures optimal adhesion of coatings and waxes, maximizing their protective power. It also simplifies the application of follow-up products by removing troublesome residues. Designed for Demanding Car Care The LUMINUS Pairway Paint Cleaner Primer is tailored for those who value flawless paint care and professional results. Whether enthusiast or pro, this product is an indispensable part of high-quality vehicle detailing.

" Is the history of the wash bucket in car care one full of misconceptions?! Well, we won’t go that far. However, we must be more precise to clear up some myths. The wash buckets used for hand washing vehicles are associated with the US manufacturer Grit Guard Inc., but the invention from Grit Guard is not the wash bucket itself, but rather their namesake dirt screen, which prevents the stirring up of dirt particles, allowing for a scratch-free to nearly scratch-free hand wash. Grit Guard® bucket inserts have been designed for nearly standardized US wash buckets and thus also fit into the new buckets from Magic Bucket. Magic Bucket: A Completely New 5 Gallon Wash Bucket for Hand Washing? The Magic Bucket is therefore not a completely newly developed wash bucket. It closely resembles the US wash buckets that have been produced by many manufacturers worldwide for decades. However, it should not be overlooked that Magic Bucket is exclusively produced for car care, thus featuring certain unique qualities in terms of quality, compatibility, and design. Extreme wall thickness of 90mil, or 0.9mm Height: 368mm Diameter: 300mm High-strength HDPE plastic, tear and impact resistant Handle for a secure grip without pinched fingers is included. Available in many colors with completely colored plastic, no printing Full compatibility with accessories from Grit Guard, Detail Guardz, Detailing Outlaws Why does Chemical-Shark.de offer the Magic Buckets 5 Gallons? Due to the Corona crisis, logistical issues have arisen in sourcing large-volume imports. With Magic Bucket, we are tapping into a new European manufacturer that solves this issue for us by producing high-quality wash buckets with a wide color palette. The accessories we offer from Grit Guard and Detail Guardz fit perfectly with the wash buckets. 3.5 and 5-gallon buckets are available in many interesting colors directly from stock. 3.5 or 5 Gallons: Which Size for Hand Wash Buckets is Recommended? When deciding on the right size of the wash bucket, many factors must be considered. Vehicle size, type of washing method, frequency of car washes, and not least the space in the car or trunk must be taken into account. Therefore, we cannot provide a fixed recommendation or rule for this question. If you wash your car at a wash station, you should choose a size that fits in the trunk. We recommend preparing the shampoo water at home or in your own garage and sealing the wash bucket with a lid for the trip to the wash station. Own Washing Utensils Forbidden at the Wash Station? - How the Wash Park Operator Becomes Your "Best Buddy"! Our tip for wash enthusiasts at the wash station: If the local wash park operator prohibits hand washing with personal utensils with large signs, it is usually because the wash stations are occupied for too long. Asking the operator if it’s okay to wash early in the morning or late at night with your own equipment when there’s little or no traffic is usually received positively. You can peacefully clean your car with your own - ideally pH-neutral or biodegradable washing chemicals - and often meet like-minded car care enthusiasts with the proverbial "nail in their head". "

Is the story of the wash bucket in car care a tale full of misunderstandings?! Well, we don't want to go that far. However, we need to clarify some misunderstandings. The wash buckets for hand washing vehicles are associated with the US manufacturer Grit Guard Inc., but the invention by Grit Guard is not the wash bucket itself, but rather the company’s namesake grit guard, which prevents the stirring up of dirt particles and thus allows for a scratch-free hand wash. Grit Guard® wash bucket inserts are designed to fit standardized US wash buckets and are therefore compatible with the new buckets from Magic Bucket. Magic Bucket: A completely newly developed 3.5-gallon wash bucket for hand washing? The Magic Bucket is not a completely newly developed wash bucket. It resembles the US wash buckets produced by many manufacturers worldwide for decades. However, it is worth mentioning that the Magic Bucket is exclusively produced for car care, offering specific features in terms of quality, compatibility, and design. Extreme wall thickness of 90mil, or 0.9mm Height: 265mm Diameter: 300mm Highly durable HDPE plastic, thus tear and impact-resistant Comfort grip handle included for a secure grip without pinched fingers. Available in many colors with fully colored plastic, no printing Fully compatible with accessories from Grit Guard, Detail Guardz, Detailing Outlaws Why does Chemical-Shark.de offer the Magic Buckets 3.5 gallons? Due to the COVID crisis, there have been logistical issues in sourcing large-scale imported goods. With Magic Bucket, we have found a new European manufacturer that addresses this issue and produces high-quality wash buckets with a broad color palette for us. Accessories from Grit Guard and Detail Guardz sold by us fit perfectly with these wash buckets. 3.5 and 5-gallon wash buckets are available in many attractive colors directly from stock. 3.5 or 5 Gallons: Which size of wash bucket is recommended? When deciding on the right size of wash bucket, many factors must be considered. Vehicle size, type of wash method, frequency of car washes, and ultimately the space in the car or trunk should be taken into account. Therefore, we cannot provide a fixed recommendation or rule for this question. If you wash your car at a self-service wash, you should choose a size that fits in the trunk. We recommend preparing the shampoo water at home or in your garage and sealing the wash bucket with a lid for the drive to the wash. Using personal washing utensils at the wash station forbidden? - Here’s how to make the wash park operator your "Best Buddy"! Our tip for wash enthusiasts at the wash station: If the local wash park operator forbids hand washing with personal utensils with big signs, it's usually because the wash bays are being occupied for too long. Asking the operator if it's okay to wash early in the morning or late in the evening with your own equipment when there’s little to no traffic is generally met positively. The car can be cleaned at leisure with your own - ideally pH-neutral or biodegradable - wash chemicals while you often meet like-minded car care nerds with the proverbial "nail in their head."

Is the story of the wash bucket in car care a tale full of misunderstandings?! Well, we wouldn't go that far. However, it is essential to clarify some myths. The buckets for hand washing the vehicle are associated with the US manufacturer Grit Guard Inc., but the invention by Grit Guard is not the wash bucket itself, but rather the company's namesake dirt filter, which prevents dirt particles from swirling up, allowing for a scratch-free hand wash. Grit Guard® bucket inserts have been developed for standardized US wash buckets and therefore fit perfectly into the new buckets from Magic Bucket. Magic Bucket: A completely newly developed 3.5 Gallon wash bucket for hand washing? Therefore, the Magic Bucket is not a completely new development. It largely resembles the US wash buckets produced by many manufacturers worldwide for decades. However, it should be mentioned that the Magic Bucket is manufactured exclusively for car care, thus offering several unique qualities in terms of quality, compatibility, and design. Extreme wall thickness of 90mil, i.e., 0.9mm Height: 265mm Diameter: 300mm High-strength HDPE plastic, making it tear and impact resistant Handle for a secure grip without pinched fingers included. Available in many colors with completely colored plastic, no prints Full compatibility with accessories from Grit Guard, Detail Guardz, Detailing Outlaws Why does Chemical-Shark.de offer the Magic Buckets in 3.5 Gallons? Due to the Corona crisis, there have been logistical problems in sourcing large-volume import goods. With Magic Bucket, we rely on a new European manufacturer who solves this issue for us, providing high-quality wash buckets with a wide range of colors. The accessories we sell from Grit Guard and Detail Guardz fit perfectly with the buckets. 3.5 and 5 gallon wash buckets are available in many exciting colors directly from stock. 3.5 or 5 Gallons: Which size is recommended for wash buckets? When deciding on the right size of the wash bucket, many factors must be considered. Vehicle size, type of washing method, frequency of washing, and not least, the space in the car or trunk are to be taken into account. Therefore, we cannot provide a fixed recommendation or rule for this question. If you wash your car at a washing station, you should choose a size that fits in the trunk. We recommend preparing the shampoo water at home or in your garage and therefore closing the wash bucket with a lid for the drive to the wash station. Own washing utensils forbidden at the wash station? - How to make the wash park operator your "Best Buddy"! Our tip for enthusiasts at the wash station: If the local wash park operator bans using your own utensils with large signs, it usually means the wash bays are being occupied for too long. Asking the operator whether it is okay to wash with your own equipment early in the morning or late at night when there is little to no traffic is generally met positively. The car can be cleaned thoroughly with your own - ideally pH-neutral or biodegradable washing chemistry - and you often meet like-minded car care nerds with the proverbial "nail in the head".

" Is the story of the wash bucket in car detailing a tale full of misunderstandings?! Well, we don't want to go that far. However, we must be more precise to clear up some misconceptions. The wash buckets for hand washing the vehicle are associated with the US manufacturer Grit Guard Inc., but it is not the wash bucket that Grit Guard invented, rather it is their eponymous dirt filter, which prevents the stirring up of dirt particles and thus enables a scratch-resistant to scratch-free hand wash. Grit Guard® wash bucket inserts were developed for standardized US wash buckets and therefore also fit the new wash buckets from Magic Bucket. Magic Bucket: A completely newly developed 5 Gallon wash bucket for hand washing? The Magic Bucket is also not a completely newly developed wash bucket. It resembles in essential parts the US wash buckets that have been produced by many manufacturers worldwide for decades. However, it should not go unmentioned that Magic Bucket is exclusively produced for car detailing, thus has some unique features in terms of quality, compatibility, and design. Extreme wall thickness with 90mil, or 0.9mm Height: 368mm Diameter: 300mm High-strength HDPE plastic, thus tear and impact-resistant Handle for secure grip without pinched fingers is directly included. Available in many colors with completely tinted plastic, no print Full compatibility with accessories from Grit Guard, Detail Guardz, Detailing Outlaws Why does Chemical-Shark.de offer the Magic Buckets 5 Gallons? Due to the Corona crisis, logistical problems arose in sourcing large-volume imported goods. With Magic Bucket, we rely on a new European manufacturer who solves precisely this issue for us and produces high-quality wash buckets with a broad color palette. The accessories we offer from Grit Guard and Detail Guardz fit perfectly with the wash buckets. 3.5 and 5-gallon wash buckets are available in many interesting colors directly from stock. 3.5 or 5 Gallons: Which size for hand wash wash buckets is recommended? When deciding on the right size of the wash bucket, many factors have to be considered. Size of the vehicle, type of wash method, frequency of car washing, and not least the space in the car or trunk must be taken into account. Therefore, we cannot provide a fixed recommendation or rule for this question. If you're washing your car at a wash box, you should choose a size that fits in the trunk. We recommend preparing the shampoo water at home or in your own garage and closing the wash bucket with a lid for the trip to the wash box. Personal washing utensils prohibited at the wash box? - How to make the wash park operator your "Best Buddy"! Our tip for washing enthusiasts at the wash box: If the local wash park operator prohibits hand washing with personal utensils with large signs, it usually has the reason that the wash boxes are occupied too long. A query to the operator whether it is okay to wash with your own equipment early in the morning or late at night when there is little to no traffic is usually positively answered. The car can be cleaned at ease with your own - ideally pH-neutral or biodegradable wash chemicals - and you often meet like-minded car detailing nerds with the proverbial "nail in your head." "

These work gloves are perfect for automotive and motorcycle tasks requiring high grip safety.Nylon knitPU-coated palmgrip-safenon-sliplint-freeexcellent tactile feelknit cuffunlined

These work gloves are ideal for automotive and motorcycle tasks where high grip is essential.Nylon knitPU-coated palmhigh gripnon-sliplint-freeexcellent tactile sensitivityknit cuffunlined

These work gloves are perfect for automotive and motorcycle tasks where high grip reliability is required.Nylon knitPU-coated palmgrip safenon-sliplint-freeexcellent tactile feelknit cuffunlined

Meguiar's Foaming Floormat and Carpet Cleaner 437ml - Deep-Cleaning Power for Carpets and Mats Meguiar's Foaming Floormat and Carpet Cleaner is a powerful foam cleaner designed for an intensive clean of carpets and floormats inside your vehicle. The active foam formula penetrates deep into fibers, breaking down tough dirt and lifting contaminants to the surface for easy removal. Foaming cleaner for carpets and floormats Effectively removes ingrained dirt and stubborn stains Refreshes colors and fibers visibly Leaves interior surfaces clean and fresh Deep Penetration with Active Foam This potent foam cleaner works beyond the surface, targeting deep-set grime like road dirt, beverage stains, and everyday residues without harming the material. Clean Fibers with a Fresh Look Post-cleaning, carpets and mats appear brighter and well-maintained. Fibers stand upright, feel clean, and remain residue-free—perfect for enhancing the cabin’s appearance and hygiene. Simply spray onto the surface, let it sit briefly, then agitate with a brush or microfiber cloth. Dirt lifts easily for quick removal. Meguiar's Foaming Floormat and Carpet Cleaner is the ideal choice for those who want fast, thorough, and gentle cleaning of vehicle carpets and floormats.

High-performance wheel cleaner for all factory-painted rims. The unique foaming action removes stubborn road grime, brake dust, and greasy residues. Simply spray Hot Rims All Wheel Cleaner onto the cool rim and rinse off with a strong jet of water after about 15 seconds. Safe for all factory-painted rims. (NOT suitable for anodized, repainted, or powder-coated rims) Unique foaming action eliminates stubborn road grime, brake dust, and grease film. The cleaner for heavily neglected rims.

The Meguiar's Inside & Out Detailer 710ml is a versatile care product designed to effectively clean and protect both the interior and exterior surfaces of your vehicle. With its advanced formula, this detailer effortlessly removes dirt, dust, and fingerprints from paint, glass, and plastic surfaces, leaving a streak-free, glossy finish. Versatile Cleaning for Inside and Out Whether it's the dashboard, door panels, side mirrors, or paint surfaces – the Inside & Out Detailer is suitable for almost all surfaces. Its gentle yet effective cleaning action ensures that even delicate materials like touchscreen displays or high-gloss plastics can be safely cleaned without damage or discoloration. Features and Benefits All-in-One Solution: Cleans and protects paint, glass, and plastic surfaces both inside and outside. Fast-Drying: Leaves no residue and provides a streak-free result. UV Protection: Protects surfaces from harmful UV rays and prevents fading. Easy Application: Simply spray on and wipe with a microfiber cloth. Application Tips Shake the bottle well before use. Spray the product directly onto the surface to be cleaned or onto a clean microfiber cloth. Evenly distribute with the cloth and remove dirt. Wipe off residues with a clean side of the cloth until the surface is dry and shiny. With the Meguiar's Inside & Out Detailer 710ml, you get a high-quality care product that brings your vehicle back to life both inside and out while providing long-lasting protection.

The Meguiar's Watermelon Bubblegum Scented Car Wash 1890ml offers an exceptional cleaning experience for your vehicle. With its concentrated, frothy formula, it effectively removes dirt, impurities, and residues while being gentle on the paint. The pleasant scent of watermelon and bubblegum makes car washing a special experience. Outstanding Cleaning with Rich Foam Thanks to its pH-neutral composition, this shampoo is safe for all paint surfaces and does not affect existing wax or sealant layers. It creates an extra-rich foam that effectively loosens and transports dirt particles, reducing the risk of micro-scratches. Versatile Application Options The shampoo is suitable for traditional hand washing with a bucket as well as for use with foam cannons or guns. For bucket washing, mix 30 ml of shampoo with 3.8 liters of water. When using a foam cannon, a mixing ratio of 1:5 (shampoo to water) is recommended. Features and Benefits Concentration: Highly concentrated formula for long-lasting use. pH-Neutral: Safe for all paint types and existing protective layers. Pleasant Scent: Refreshing watermelon and bubblegum scent for a special washing experience. Versatile: Suitable for hand washing, foam cannons, and guns. Gentle: Effectively removes dirt without damaging the paint. With the Meguiar's Watermelon Bubblegum Scented Car Wash 1890ml, vehicle care becomes not only more effective but also a fragrant pleasure.

The exceptionally versatile brush for all hard-to-reach dirt. Slide-lock sleeve for adjusting bristle length. Safe and suitable for all interior surfaces. Rubber-coated handle for comfort and user-friendliness. Ultra-soft and long-lasting bristles. The ultimate brush for all those tricky cleaning spots! Safe and suitable for all interior surfaces Rubber-coated handle for comfort and ease of use Ultra-soft bristles

The Supreme Wheel Brush by Meguiars is a game changer. Crafted with super-soft microfiber, it effortlessly captures brake dust and other dirt commonly found on wheels while being extremely gentle on painted, coated, and high-gloss surfaces. Especially suitable for delicate or ceramic-coated wheels, the Supreme Wheel Brush ensures thorough cleaning. Despite completely avoiding wire and metal components during production, this brush is highly durable and can be used for years. The gentle yet thorough cleaning tool for all wheel types Perfect for large wheels with wide spoke distances Ideal for removing brake dust deep within the wheel bed Available in 2 sizes for different wheel types, with a non-slip grip Length options of approximately 47 or 37cm Minimum spoke distance at the narrowest point: 4cm

Ultimate Wash & Wax by Meguiars is the ultimate shampoo for washing waxed or sealed paintwork. The formula contains natural Carnauba waxes and synthetic polymers, extending the longevity of waxes. This results in a noticeable gloss and color refreshment. Dirt particles are encapsulated, providing a gentle yet powerful clean.Meguiars Ultimate Wash & Wax is also perfect for washing motorcycles and can be used with foam sprayers.The formula of Ultimate Wash & Wax is suitable for application on wrapped and matte finish vehicles, preserving the matte look.

Meguiar’s Gold Class Total Interior Cleanser 473ml - Ultimate Interior Care Meguiar’s Gold Class Total Interior Cleanser is a versatile interior cleaner designed for almost all surfaces inside your vehicle. The premium Gold Class formula effectively removes dust, dirt, and fingerprints, leaving a clean, cared-for look without residue or unwanted shine. Universal interior cleaner for a wide range of surfaces Removes dust, dirt, and light grime effortlessly Leaves a natural, clean finish No greasy residue or artificial gloss Gentle yet Powerful Cleaning for Your Entire Interior Perfect for plastic, vinyl, leather, rubber, displays, and sensitive surfaces. This balanced formula cleans thoroughly without damaging materials, preserving the original look and feel of your interior surfaces. Clean & Care in One Easy Step Besides cleaning, Total Interior Cleanser refreshes your interior’s appearance. Surfaces feel clean and well-maintained without being greasy or glossy. Ideal for regular upkeep to keep your cabin looking premium. Simply spray on a microfiber cloth or directly onto the surface and wipe away grime—no extra effort needed. Meguiar’s Gold Class Total Interior Cleanser is the perfect solution for those seeking quick, effective, and gentle interior cleaning with a natural finish.

Meguiar’s Hybrid Ceramic Wash & Wax Shampoo 1420mlMeguiar’s Hybrid Ceramic Wash & Wax Shampoo combines deep car cleaning with advanced hybrid ceramic technology. While washing, it adds a protective ceramic layer that delivers intense smoothness, brilliant shine, and strong water beading. Perfect for regular washes to maintain existing protection or quickly shield your paint effortlessly.2-in-1 car shampoo with integrated hybrid ceramic sealantGentle cleaning with built-in paint protectionEnhances shine, smoothness & water beading effectSafe for all glossy and clear coatsHybrid Ceramic Tech for Every WashAdvanced formula blends premium surfactants with SiO₂-based hybrid ceramic components. Loosens dirt effectively, leaving a protective ceramic layer on the paint during rinsing. The result: a visibly glossy finish with improved water repellency—no extra effort needed.Gentle Wash with Stunning ShineRich, slick foam reduces wash swirl risks while boosting paint depth and delivering a smooth, cared-for surface feel. Existing waxes or ceramic coatings stay intact and are enhanced.Simply mix the shampoo with water in a wash bucket. Clean the vehicle as usual with a wash mitt, then rinse thoroughly. The ceramic effect activates during rinsing to provide instant water beading. After drying, the paint looks smooth, glossy, and visibly protected.Meguiar’s Hybrid Ceramic Wash & Wax Shampoo is perfect for anyone wanting combined cleaning and protection every wash. Saves time, boosts lasting shine, and helps keep your paint looking flawless long-term.

Meguiar’s Ultimate Whole Car Air Re-Fresher Air Freshener 59ml Meguiar’s Ultimate Whole Car Air Re-Fresher is a powerful air freshener that effectively eliminates unpleasant odors throughout your vehicle’s interior. Its special formula neutralizes odors rather than masking them, leaving a fresh, clean scent inside your entire car. Eliminates unpleasant odors throughout the interior Neutralizes odors instead of covering them Refreshes upholstery, carpets, and air vents Pleasant, long-lasting fragrance Freshness for the Entire Interior This aerosol air freshener spreads evenly inside the vehicle, reaching hard-to-access areas like ventilation ducts, carpets, and upholstery. It targets odor sources throughout the interior, not just surface smells. Simple and Effective Application Once activated, the freshener works automatically without manual effort, thoroughly neutralizing odors with a fresh scent that significantly enhances your driving experience. Ideal for use after interior cleaning or to remove stubborn odors like smoke, pets, or food residues. Meguiar’s Ultimate Whole Car Air Re-Fresher is the perfect solution for anyone wanting a quick, easy, and lasting odor removal in their car.

Clean, deep black - shiny or matte - tires define the perfect look of a car. To achieve a perfect finish on tires, they must be cleaned first. The Mothers Contoured Wheel Brush features a native design that adapts to the sidewall of the tire, making cleaning easier and more thorough than ever. With its non-slip grip, rubber edging, and lightweight yet durable construction, tire cleaning becomes a pleasure. It's ideal for use with tire and rubber cleaners. Lightweight, ergonomic design for tire cleaning Curved native design fits tire sidewalls High quality for multiple uses Safe, non-slip rubber grip Rubber edging protects adjacent surfaces

Fender wells are notorious for stubborn and embedded dirt, making them challenging to clean. With the Mothers Fender Well Brush, this otherwise tedious task becomes quick and effortless. The non-slip comfort grip, ergonomic design, and lightweight construction allow the extra soft, scratch-free bristles to reach deep into the wheel wells. The Mothers Fender Well Brush is also perfect for wheels and features a protective rubber bumper around the edge. It cleans safely while protecting adjacent surfaces.Very lightweight, ergonomic design for cleaning fender wells and wheel archesHigh quality for thousands of usesSafe, non-slip rubber gripRubber trim to protect adjacent surfaces

When you need to safely clean wheels and rims from road dirt and brake dust, the Mothers Wheel Brush is the perfect choice. Its extra-soft, scratch-free bristles with a non-slip comfort grip and lightweight, ergonomic design make it ideal for this task. With its protective rubber edge, the Mothers Wheel Brush cleans safely while protecting sensitive adjacent surfaces. Very lightweight, ergonomic design for wheel cleaning High quality, suitable for multiple uses Secure, non-slip rubber grip Rubber edging to protect adjacent surfaces

GHF1 Foam Sprayer – Perfect Foam Cleaning Without High Pressure The GHF1 Foam Sprayer by MTM Hydro is the ideal solution for anyone who wants to gently and effectively foam their vehicle without using a high-pressure cleaner. Thanks to its innovative design, the foam sprayer connects directly to a garden hose, ensuring even foam distribution for a gentle clean. Includes Gardena Nipple – Easy to Use The GHF1 comes standard with a Gardena nipple that guarantees a secure, leak-proof connection to your garden hose. Just attach the hose, fill in the cleaner, and start foaming right away. Who is the GHF1 Foam Sprayer for? This low-pressure foam sprayer is perfect for: Vehicle owners wanting to gently wash cars, motorcycles, bicycles, boats, or aircraft Users without a pressure washer who still want effective foam cleaning Anyone valuing a gentle, even foam application to protect delicate surfaces Technical Highlights of the GHF1 Foam Sprayer With the GHF1, MTM Hydro launches its first low-pressure foam sprayer for garden hoses. Its robust, impact-resistant plastic housing is molded from a single piece for maximum durability. The adjustable air intake lets you control foam density to match your cleaning needs. Another feature is the included MTM Hydro Adaptable Wide Mouth Bottle. This 1-liter bottle stands stably on flat surfaces and has a graduated scale for precise detergent dilution. Product Benefits at a Glance: Low-pressure foam sprayer, ideal for Gardena couplings Easy 1/2-inch internal thread connection Adjustable foam dosing via a handy control knob Perfect for caravans, bikes, motorcycles & sensitive surfaces where high pressure is not suitable Flexibility with Multiple Connection Options The GHF1 foam sprayer can be operated in two ways: Via the 1/2-inch internal thread to connect to various hoses or adapters Via the included Gardena nipple for quick and easy garden hose attachment This makes the GHF1 perfect for anyone seeking effective foam cleaning with minimal water pressure – whether for cars, motorcycles, bikes, or campers. Especially useful: the gentle application protects delicate surfaces, preventing water intrusion under pressure or damage to paint and seals. Conclusion: High-Quality Foam Cleaning Made Easy The MTM Hydro GHF1 Foam Sprayer makes vehicle care easier than ever. Its combination of low-pressure technology, durable construction, and flexible connections makes it the perfect companion for gentle cleaning without high-pressure washers. Try it now and enjoy thorough, gentle foam cleaning!

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers made in Italy. It handles up to 200 bar pressure and 11.5 L/min water flow. With a 1000 ml tank, it holds more than most competing foam cannons. Foam generation and delivery happen via flow and suction through the brass and stainless steel foam head. The PF22.2 offers numerous adjustments: spray pattern from round to flat, flat jet direction horizontal or vertical, and water/chemical mix concentration. It's engineered with a tip-proof design as an upgrade from the PF22 model. Perfect Foam for Auto Detailing & Care: MTM Hydro PF22.2 at Chemical-Shark.de After thorough research and testing, we proudly introduce the MTM Hydro PF22.2—the first Italian pressure washer foam cannon in our lineup. It meets all key practical requirements. With compatible adapters, which we continuously expand, this foam cannon fits most hobby and professional pressure washers. The MTM Hydro PF22.2 produces excellent foam even with low-viscosity APCs, making it perfect for universal use. The foam lance foams perfectly even at low concentrations, ensuring economical and eco-friendly vehicle cleaning. Our tests confirm the PF22.2’s quality and craftsmanship surpass many Asian knockoffs. For wear or damage, we also stock the correct replacement parts. Various Versions of the MTM Hydro PF22.2 Foam Lance The MTM Hydro is available fully assembled with different adapters or can be adapted via 1/4" screw thread. Contact us for help choosing the right adapter. High-quality Italian-made foam lance Patented foam generation technology Tip-proof design with fill level scale Adapters for Kränzle, Nilfisk, and Kärcher included

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, proudly made in Italy. It supports pressures up to 200 bar and a water flow of 11.5 l/min. Its 1,000 ml tank holds more than most foam cannons from other brands. Foam generation occurs via flow and suction through a precision brass and stainless steel foam head. The PF22.2 offers multiple adjustments: spray pattern from round to flat, flat spray direction horizontal or vertical, and water/chemical mixture concentration. This upgraded model is designed to be tip-resistant for stable use. Ultimate Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After thorough research and testing, we're proud to add MTM Hydro PF22.2—the first pressure washer gear from this Italian brand—to our lineup. It meets all key practical demands with adaptability for most hobby and professional pressure washers via available adapters we continue to expand. The PF22.2 produces outstanding foam even with low-viscosity APC cleaners, allowing versatile and eco-friendly vehicle cleaning. Minimal chemical concentration still creates rich foam, ensuring cost-effective, sustainable car care. Our tests also highlighted top-tier materials and craftsmanship, making it far superior to cheap Asian copies. Plus, matching spare parts ensure long-term service and easy maintenance. Various Versions of the MTM Hydro PF22.2 Foam Lance Available fully assembled with different adapters or adaptable by yourself using a 1/4 screw thread. Contact us for help choosing the right adapter. Premium foam lance made in Italy Patented foam generation technology Tip-resistant design with fill level scale Adapters for Kränzle, Nilfisk, and Kärcher included

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, made in Italy. It supports up to 200 bar pressure and a water flow of 11.5 l/min. With a 1000 ml tank, it holds more foam liquid than most foam cannons from other brands. Foam generation and delivery are ensured by a brass and stainless steel foam head using flow and suction technology. The MTM Hydro PF22.2 offers multiple adjustment options: spray pattern from round to flat, flat spray direction horizontally or vertically, and water-to-chemical mix concentration. Designed as an improved and tip-resistant version of the PF22.Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.deAfter extensive research and testing, we proudly introduce the MTM Hydro PF22.2 as the first Italian-made foam cannon for pressure washers in our lineup. It meets all key practical demands. With suitable adapters, which we will expand, the MTM Hydro fits most pressure washers for hobby and professional use. It delivers excellent foam even with diluted APC cleaners, making it universally applicable. Even at low concentrations, the PF22.2 foams perfectly for economical and eco-friendly vehicle cleaning.The MTM Hydro PF22.2 also stands out for its top-level material quality and craftsmanship, exceeding Asian counterfeits. If parts wear out or break, we carry all needed replacements.Different Versions of the MTM Hydro PF22.2 Foam LanceThe MTM Hydro comes ready-to-use with various adapters or can be adapted via 1/4 screw thread. We’re happy to help with advice on the right adapter.High-quality foam lance made in ItalyPatented foam generation technologyTip-resistant design with fill-level scaleAdapters available for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, crafted in Italy. It operates at up to 200 bar and 11.5 l/min water flow. With a 1,000 ml tank, it holds more foam solution than most competitors. Foam is generated via a brass and stainless steel nozzle using flow and suction. The PF22.2 features multiple adjustable settings: spray can be switched from round to flat, flat spray direction horizontal or vertical, and water/chemical mix concentration is adjustable. This upgraded model is designed to be tip-proof for secure handling.Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.deAfter extensive research and testing, we proudly offer the MTM Hydro PF22.2—our first Italian-made foam cannon for pressure washers. It meets all essential practical needs with versatile adapters, compatible with most hobby and professional pressure washers. The PF22.2 produces excellent foam even with low-viscosity APC cleaners, making it a versatile, economical, and eco-friendly choice for vehicle cleaning.Its outstanding build quality and materials outperform Asian counterfeits, ensuring durability. Replacement parts are available if needed.MTM Hydro PF22.2 Foam Lance VariantsThe foam lance is available pre-assembled with various adapters or can be adapted via 1/4 screw thread. If you need help selecting the right adapter, our team is happy to assist.High-quality Italian-made foam lancePatented foam generation technologyTip-proof design with filling scaleAdapters available for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for high-pressure cleaners made in Italy. The lance supports up to 200 bar and a water flow of 11.5 l/min. With a 1000 ml tank, the PF22.2 holds more foam solution than most foam cannons from other manufacturers. Foam generation and delivery are controlled via flow and suction through a brass and stainless steel foam head. The MTM Hydro PF22.2 offers multiple adjustments including spray pattern from round to flat, flat spray direction horizontally or vertically, and water/chemical mix concentration. Designed as an improved version of the PF22, this foam cannon is tip-resistant. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After thorough product research and extensive testing, we proudly welcome the MTM Hydro PF22.2 as our first high-pressure cleaner product from this Italian manufacturer. It meets all essential practical requirements we value. With compatible adapters (which we continue to expand), it fits most hobby and professional high-pressure cleaners. The MTM Hydro PF22.2 produces excellent foam even with low-viscosity APC cleaners, making it universally suitable. Even at low chemical concentration, the PF22.2 foams perfectly, enabling economical and eco-friendly vehicle cleaning. Our tests confirmed the PF22.2’s superior build quality and material finish, outperforming Asian copies. And if parts wear or break, we supply the matching spare parts. Various Versions of the MTM Hydro PF22.2 Foam Lance The MTM Hydro is available fully assembled with different adapters or can be fitted via 1/4" threaded screw. For adapter advice, feel free to contact us. High-quality Italian-made foam lance Patented foam generation technology Tip-proof design with fill level scale Adapters for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for high-pressure cleaners, crafted in Italy. Compatible with up to 200 bar and a water flow of 11.5 l/min, its 1,000 ml tank holds more foam solution than most competitors. Foam generation and delivery are driven by flow and suction through a brass and stainless steel foam nozzle. The PF22.2 offers extensive adjustments: spray pattern from round to flat, flat spray direction horizontal or vertical, and water/chemical mix concentration. Designed as a tilt-proof upgrade from the PF22. Ultimate Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive research and testing, we proudly add the first Italian high-pressure foam cannon to our lineup. The MTM Hydro PF22.2 meets all key practical demands. With various adapters—more coming soon—it fits most hobby and professional pressure washers. It produces dense foam even with low-viscosity APCs, enabling universal, eco-friendly, and efficient vehicle cleaning. Our tests confirm the PF22.2’s quality and workmanship surpass Asian copies. Plus, we stock all necessary spare parts for wear or damage. MTM Hydro PF22.2 Foam Lance Variants Available pre-assembled with different adapters for quick use or adaptable via 1/4" thread. Need adapter advice? We’re here to help. Premium Italian-made foam lance Patented foam generation technology Tilt-proof design with fill level scale Adapters for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, made in Italy. It operates with up to 200 bar and a water flow of 11.5 l/min. With a 1000 ml tank, it holds more than most foam cannons from other brands. Foam generation and delivery occur through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.2 offers numerous adjustable settings: the spray pattern can be switched from round to flat, the flat spray angle can be adjusted horizontally or vertically, and the water/chemical mix concentration can be controlled. Designed as an upgraded, tip-proof version of the PF22.Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.deAfter thorough product research and intensive testing, we are proud to add the MTM Hydro PF22.2, the first pressure washer product from this Italian manufacturer, to our range. It meets all practical requirements we consider essential. With suitable adapters—which we will expand—the MTM Hydro fits most hobby and professional pressure washers. It delivers excellent foam even with low-viscosity APC cleaners, allowing universal use. Even at low concentrations, the PF22.2 perfectly foams products enabling economical and eco-friendly vehicle cleaning.Our tests prove the MTM Hydro PF22.2’s high quality and material durability, surpassing Asian counterfeits. Should parts wear or break, we stock matching replacements.Various Versions of the MTM Hydro PF22.2 Foam LanceThe MTM Hydro is delivered ready to use with various adapters or can be fitted via a 1/4-inch screw thread. Contact us for assistance selecting the right adapter.High-quality foam lance made in ItalyPatented foam generation technologyTip-proof design with fill-level scaleAdapters available for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, made in Italy. The lance operates at up to 200 bar with a water flow of 11.5 l/min. Its 1000 ml tank holds more than most foam cannons from other brands. Foam generation and delivery are controlled through a brass and stainless steel foam head ensuring consistent foam quality. The MTM Hydro PF22.2 offers multiple adjustments: spray pattern from round to flat, horizontal or vertical flat spray direction, and water/chemical mix concentration. A stable, tipping-resistant design improves on its predecessor, the PF22. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive research and rigorous tests, we proudly offer the MTM Hydro PF22.2 as our first Italian-made professional foam cannon model for pressure washers. It meets all practical demands we value. With compatible adapters (expanded continuously), it fits most hobby and professional pressure washers. The MTM Hydro PF22.2 produces excellent foam even with low-viscosity APC cleaners for versatile use. It efficiently foams even at low concentrate levels, enabling economical and eco-friendly vehicle cleaning. Our tests also prove superior material quality and craftsmanship, far exceeding Asian counterfeits. If parts wear or break, suitable replacements are available in our range. MTM Hydro PF22.2 Foam Lance Variants Available ready to use with various adapters or adaptable via a 1/4" screw thread. Need help with the correct adapter? We’re happy to assist. Premium Italian-made foam lance Patented foam generation technology Tip-resistant design with filling scale Adapters for Kränzle, Nilfisk, and Kärcher included

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon!The MTM Hydro PF22.3 is a professional foam cannon for pressure washers made in Italy. It operates up to 200 bar with a water flow of 11.5 l/min. With a 1000ml tank, it holds more foam solution than most competitors. Foam generation and delivery are controlled via flow and suction through the brass and stainless steel foam head. The MTM Hydro PF22.3 features multiple adjustments: spray pattern from round to flat, flat spray direction horizontal or vertical, and water/chemical mix concentration. This model is an upgrade from the PF22.2 with a large filling opening. An upgrade kit for PF22 and PF22.2 owners is also available.The MTM Hydro comes ready to use with various adapters or can be fitted with a 1/4" thread adapter. Need help choosing the right adapter? We're here to assist.Variants of the MTM Hydro PF22.3 Foam LanceAvailable preassembled with different adapters or adaptable via 1/4" thread. Contact us for adapter advice.High-quality Italian foam lance productionPatented foam generation technologyTip-resistant with fill level scaleAdapters for Kränzle, Nilfisk, KärcherWide Mouth Version 2024!!!MTM Hydro initially didn't plan to produce the Wide Mouth. The PF22.2 was originally innovated by the US importer, who developed an upgrade kit based on the GHF1 low-pressure garden hose foam cannon. After our request to make this an official MTM Hydro product, our Italian partners launched the PF22.3 and the upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon for high-pressure cleaners, made in Italy. The lance can be used with up to 200 bar and a water flow of 11.5 l/min. With a tank volume of 1,000 ml, the MTM PF22.3 holds more than most foam cannons from other manufacturers. The foam generation and dispensing occur through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.3 features multiple adjustable settings. You can adjust the spray pattern from round to flat, the direction of the flat spray horizontally or vertically, and the concentration of the water/chemical mixture. The MTM Hydro PF22.3 is a development of the PF22.2, designed with a large filling opening. An upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro comes fully assembled with various adapters and is ready for use, or it can be adapted with a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. Different Versions of the PF22.3 Foam Lance from MTM Hydro The MTM Hydro is available fully assembled with various adapters and is ready to use or can be adapted with a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. High-quality foam lance from Italian production Patented technology for foam generation Tip-resistant with scale for filling Various adaptations for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024 !!! Initially, MTM Hydro did not intend to produce the so-called Wide Mouth variant. The "inventor" of the PF22.2 was - as far as we know - the US importer, who developed a corresponding retrofit kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (i.e., low pressure). At our urging to make this an official MTM Hydro product, our Italian friends eventually complied, leading to the creation of the PF22.3 and the offered upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon!The MTM Hydro PF22.3 is a professional foam cannon for high-pressure washers, made in Italy. It can handle up to 200 bar pressure and a water flow of 11.5 l/min. With a 1000 ml tank, it holds more than most other foam cannons. Foam generation and delivery operate via flow and suction through the brass and stainless steel foam head. The PF22.3 offers multiple adjustments: spray pattern from round to flat, flat spray direction horizontal or vertical, and water/chemical mix concentration. It's an evolution of the PF22.2 featuring a large filling opening. An upgrade kit for PF22 and PF22.2 users is also available.The MTM Hydro comes ready-to-use with various adapters or can be adapted via 1/4 thread. We're happy to assist with adapter selection.MTM Hydro PF22.3 Foam Lance VariantsAvailable pre-assembled with different adapters or DIY via 1/4 thread. Contact us for help choosing the right adapter.Premium Italian-made foam lancePatented foam generation technologyTip-resistant with fill level scaleAdapters for Kränzle, Nilfisk, and Kärcher2024 Wide Mouth version!!!MTM Hydro initially didn’t plan to produce the Wide Mouth. The PF22.2 was originally developed by the US importer, who created a conversion kit based on the GHF1 low-pressure garden hose foam cannon. After our insistence to make it an official MTM Hydro product, the Italian team launched the PF22.3 and upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon!The MTM Hydro PF22.3 is a professional foam cannon for pressure washers made in Italy. The lance handles up to 200 bar and a water flow of 11.5 l/min. With a 1000 ml tank, it holds more foam solution than most other brands. Foam generation and delivery occur via flow and suction through the brass and stainless steel foam head. The PF22.3 offers multiple adjustments: spray pattern from round to flat, flat spray direction horizontal or vertical, and water/chemical mix concentration. It’s an upgrade from the PF22.2, featuring a large filling opening. Upgrade kits for PF22 and PF22.2 owners available.MTM Hydro is ready to use with various adapters mounted or can be adapted via 1/4 thread. Contact us for adapter advice.Available Versions of MTM Hydro PF22.3 Foam LanceComes pre-assembled with adapters or adaptable with 1/4 screw thread. We're happy to help with the right adapter.Premium foam lance made in ItalyPatented foam generation technologyTip-proof design with fill scaleAdapters for Kränzle, Nilfisk, and KärcherWide Mouth Version 2024!!!Originally, MTM Hydro didn’t plan to make the Wide Mouth version. The "inventor" was the US importer who developed a conversion kit based on the GHF1 low-pressure garden hose foam cannon for the PF22.2. Due to our push for this to be official MTM Hydro product, the PF22.3 and the upgrade kit were created by our Italian partners.