The Polishing Pad: Key to Perfect Paint Surfaces

The Standard Duty Orbital Pads - short "SDO" - from Lake Country Manufacturing cater to the requests and recommendations of many detailers. The idea was to utilize the high-quality foam of the HDO pads without the traditional underlayer. This manufacturing method makes the popular foam attractive for budget-conscious buyers. It should be noted that the heat development with modern Flex and Rupes dual-action polishers remains low due to new drive and design generations. Another key technology from Lake Country is CCS, which stands for Collapsed Cell Structure. The CCS surface features small pockets that contain closed cell structure, even though the foam of the pad is open-pored. This characteristic allows for more economical use of polish with CCS pads. The polish penetrates the pocket but not the polishing pad, allowing for longer processing times. Meanwhile, the cell structure is better cooled, preventing the pad from drying out from the polish. With the new SDO CCS pads, both technologies are available in one pad series. The US manufacturer surprises the market by keeping the manufacturing cost at the same level as "regular" SDO pads. Optimized for consistent polishing performance and high durability: Lake Country SDO CCS at Chemical-Shark.de The high-quality foam of the SDO and HDO polishing pads ensures consistent polishing performance and high durability. Even with high stroke and oscillation rates, like with the Rupes LHR21e Mark III, the pads remain stable and run smoothly. The SDO CCS Pad Orange Medium is designed for removing medium paint defects with good finishing What makes Lake Country foam pads so unique? Extremely high durability and resulting smooth operation are key characteristics of Lake Country pads. Especially with medium-cut and finishing, it is the exceptional working feel provided by Lake Country foam that leads to consistently perfect results!

The Blue Foamed Wool Pads by Lake Country offer a perfectly balanced and controlled paint correction focused on delivering a high-level finish. Within the Foamed Wool series, these pads are finer-tuned than the Purple Pads, combining effective, even cutting with an exceptionally clean surface quality. The foam structure fully integrated into the wool material ensures stability, smooth operation, and precise polishing feel—regardless of the polisher used.Hybrid wool pad with controlled cut and excellent finishBlue Foamed Wool: finer tuning within the Foamed Wool rangeFully integrated foam throughout the wool materialStabilized wool fibers for consistent, predictable abrasionVery smooth running with excellent controlMinimal splatter and reduced dust generationIdeal for forced rotation and free-spinning dual-action polishersAlso highly controllable on rotary polishersHigh cut with significantly reduced hazeClear, even finish requiring minimal reworkAvailable for 75mm, 125mm, and 150mm backing platesBlue Foamed Wool Pads – Controlled Correction with Superior FinishThe technical edge of Blue Foamed Wool Pads is their finely tuned fiber and foam structure. The foam is fully distributed throughout the pad, stabilizing each wool fiber without increasing aggressiveness unnecessarily. This creates a consistent, controlled cut that reliably removes defects while leaving a visibly refined paint surface.Especially on delicate clear coats or with moderate to severe defects, Blue Pads excel. They operate quietly and temperature-stably, allowing longer polishing cycles with consistent results. The outcome is a very clean, clear finish that significantly reduces further polishing effort.Difference between Blue and Purple Foamed Wool PadsThe Blue Foamed Wool Pads target users who value effective defect correction combined with high surface quality. They offer less cut than the Purple Pads but impress with smoother operation, better control, and a noticeably finer finish.The Purple Foamed Wool Pads represent the more aggressive option in the Foamed Wool series, designed for maximum correction on heavy paint defects. Compared directly, Blue Pads present the more refined solution for controlled corrections with top-notch finish quality.Thus, Blue Foamed Wool Pads are the ideal choice for professional detailers seeking efficiency, control, and an outstanding finish all in one premium hybrid wool pad.

The Blue Foamed Wool Pads from Lake Country offer a perfectly balanced and controlled paint correction with a clear focus on a high-gloss finish. Within the Foamed Wool series, these pads are finer tuned than the Purple Pads, combining an effective, consistent cut with exceptional surface quality. The fully integrated foam structure within the wool provides stability, smooth running, and precise polishing feel—regardless of the polishing machine used.Hybrid wool pad focused on controlled cut and excellent finishBlue Foamed Wool: finer tuning within the Foamed Wool rangeFoam fully integrated into the wool materialStabilized wool fibers for consistent, predictable removalVery smooth operation with outstanding controlMinimal splatter and reduced dust generationIdeal for forced rotation and free-running dual action polishersAlso perfectly manageable on rotary polishersHigh cut with significantly reduced hazeClear, consistent finish with low rework effortAvailable for 75 mm, 125 mm, and 150 mm backing platesBlue Foamed Wool Pads – Controlled Correction with Premium FinishThe technical advantage of Blue Foamed Wool Pads lies in their finely tuned fiber and foam structure. The foam is evenly distributed throughout the pad, stabilizing each wool fiber without increasing aggressiveness. This ensures a smooth, controlled polish that reliably removes defects while delivering a visibly refined paint surface.Especially on sensitive clear coats or with moderate to heavy defects, Blue Pads showcase their strength. They operate quietly, maintain temperature stability, and allow longer polishing cycles with consistent results. The outcome is a clean, glossy finish that significantly reduces further polishing time.Blue vs. Purple Foamed Wool PadsBlue Foamed Wool Pads are designed for users who value effective defect removal combined with a superior surface quality. They remove less material compared to Purple Pads but provide smoother operation, better control, and a noticeably finer finish.Purple Foamed Wool Pads are the more aggressive option in the Foamed Wool range, aimed at maximum correction for heavy paint defects. In direct comparison, Blue Pads represent the more refined solution for controlled corrections with a high finish standard.Therefore, Blue Foamed Wool Pads are the perfect choice for professional detailers seeking efficiency, control, and premium finish in a high-quality hybrid wool pad.

The Blue Foamed Wool Pads by Lake Country deliver a perfectly balanced and controlled paint correction focused on a high-level finish. Part of the Foamed Wool series, these pads are finer tuned than the Purple version, combining effective, consistent cutting with exceptionally clean surface results. The fully integrated foam throughout the wool material ensures stability, smooth operation, and precise polishing feel—regardless of the polisher used.Hybrid wool pad designed for controlled cut and outstanding finishBlue Foamed Wool: finer tuning within the Foamed Wool rangeFully integrated foam structure throughout the wool fibersStabilized wool fibers for consistent, predictable removalVery smooth running with excellent controlMinimal splatter and reduced dust generationIdeal for forced rotation and free-running dual action polishersAlso highly controllable on rotary buffersHigh cut with significantly reduced hazeClear, even finish with less rework requiredAvailable for 75mm, 125mm, and 150mm backing platesBlue Foamed Wool Pads – Controlled Correction with Top-Tier FinishThe key advantage of Blue Foamed Wool Pads lies in their finely balanced fiber and foam structure. Foam is evenly distributed throughout the pad, stabilizing each wool fiber without increasing aggressiveness unnecessarily. This results in consistent, controlled abrasion that reliably removes defects while leaving a visibly refined clear coat surface.Especially effective on delicate clear coats or moderate to severe paint defects, Blue Pads operate smoothly, remain temperature stable, and allow longer polishing cycles with consistent results. The outcome is a very clean, crystal-clear finish that drastically reduces polishing effort.Difference Between Blue and Purple Foamed Wool PadsBlue Foamed Wool Pads are tailored for users who prioritize high-quality surface finish alongside effective defect removal. They offer less removal than Purple Pads but impress with smoother running, better control, and a noticeably finer finish.Purple Foamed Wool Pads provide a more aggressive cut within the Foamed Wool range, designed for heavy defect correction. Compared directly, Blue Pads represent the refined choice for controlled corrections with premium finishing demands.The Blue Foamed Wool Pads are the perfect choice for pros needing efficiency, control, and excellent finish combined in a premium hybrid wool pad.

The Collapsed Cell Structure Pads - known as CCS Pads - have revolutionized the way of uncompromising paint corrections. CCS Pads are flat foam polishing pads designed for dual action polishers and forced rotation polishers, featuring a patented surface design. It’s also worth noting that CCS Pads are generally suitable for rotary polishers, especially when their cutback shape allows for a larger polishing area on a smaller backing plate. All CCS Pads available from official distributor Chemical-Shark.de are produced in cutback shape. Patented CCS Cell Structure Offers Numerous Advantages The surface of CCS Pads is equipped with small pockets, and the interior features a closed cell structure through a special process, while the foam of the polishing pad remains open-pored. This property allows for much more economical use of polish with CCS Pads. The polish enters the pocket but not the polishing pad, allowing for prolonged use. Simultaneously, the cell structure is better cooled, and the pad doesn’t dry out from the polishing compound. Suitable for All Paint Types: Lake Country CCS Pads from Chemical-Shark.de The polishing pads, known among connoisseurs as "Smart Pads," are suitable for all paint types. This includes scratch-resistant clear coats from Mercedes Benz, BMW, and Porsche, as well as more delicate vintage car paints without a clear coat layer. Lake Country CCS Pads in Various Hardnesses and Sizes Yellow: Designed for maximum cut, removes scratches, swirls, and oxidation. Perfect for quick paint defect corrections. Orange: Medium cut, removes moderate paint defects with good finish. White: Fine cut, removes last paint defects for high-gloss finish. Black: Black finishing, very soft foam for high-gloss polishes and for applying and processing waxes and sealants. Lake Country CCS Pads Available in All Sizes: Velcro backing, polishing area: 75/90mm, 90/101mm, 125/140mm, 150/165mm. Perfectly suited for polishers from manufacturers like Flex, Rupes, Makita, Festool. Pad thickness: 22mm or 32mm. What Makes Lake Country Foam Pads Unique? Extremely high durability and resulting smooth operation are among the notable features of Lake Country Pads. Especially in medium cut and finishing, it’s the exceptional working feel provided by Lake Country foam that leads to constantly perfect results!

Lake Country has revolutionized the art of uncompromising paint corrections with the Collapsed Cell Structure (CCS) Pads. These flat foam polishing pads are designed for both orbital and forced orbital polishers featuring a patented surface design. It's worth noting that CCS Pads are also suitable for rotary polishers, especially as their cutback shape creates a larger polishing area on smaller backing plates. All CCS Pads available from the official distributor Chemical-Shark.de are produced in cutback form. Patented CCS Cell Structure Offers Multiple Benefits The surface of CCS Pads features small pockets with a closed cell structure inside, achieved through a special process, while the foam itself remains open-pored. This characteristic allows for significantly more economical use of polish. The polish penetrates into the pocket but not into the polishing pad, enabling much longer working times. Simultaneously, the cell structure is better cooled, preventing the pad from drying out due to paint polish. Suitable for All Paint Types: Lake Country CCS Pads from Chemical-Shark.de Referred to as "Smart Pads" by connoisseurs, these polishing pads are suitable for all types of paint. This includes scratch-resistant clear coats from Mercedes Benz, BMW, and Porsche, as well as more delicate vintage paints without a clear coat. Lake Country CCS Pads in Various Hardness Levels and Sizes Yellow: Designed for maximum cut, scratch, swirl, and oxidation removal. Perfect for quick paint defect corrections. Orange: Medium cut for removing moderate paint defects with good finishing. White: Fine, for the removal of final paint defects to achieve a high-gloss finish. Black: Soft foam for high-gloss polishing and for applying and processing waxes and sealants. Lake Country CCS Pads Available in All Sizes: Velcro backing, polishing surface: 75/90mm, 90/101mm, 125/140mm, 150/165mm. Perfectly suitable for polishers from manufacturers like Flex, Rupes, Makita, and Festool. Pad thickness: 22mm or 32mm. What Makes Lake Country Foam Pads Unique? Extremely high durability and resulting smooth operation are key factors describing Lake Country Pads. Particularly in medium-cut and finishing, it's the exceptional working feel provided by Lake Country foam that leads to consistently perfect results!

The Collapsed Cell Structure Pads - known as CCS Pads - have revolutionized the uncompromising paint corrections by Lake Country. CCS Pads are flat foam polishing pads designed for dual-action and forced rotation polishers featuring a patented surface design. It should be noted that CCS Pads are also suitable for rotary polishers, particularly because the Cutback shape allows for a larger polishing area when used on smaller backing plates. All CCS Pads available from the official distributor Chemical-Shark.de are produced in Cutback form. Patented CCS Cell Structure Offers Numerous Benefits The surface of the CCS Pads features small pockets, with an interior area that has a closed cell structure through a special process, while the foam is generally open-pore. This feature allows for much more economical use of polish with CCS Pads. The polish penetrates the pocket but does not soak into the polishing pad, allowing for much longer working time. At the same time, the cell structure is better cooled, and the pad cannot dry out from the drying polish. Suitable for All Paint Types: Lake Country CCS Polishing Pads from Chemical-Shark.de Known among aficionados as "Smart Pads", these polishing pads are suitable for all paint types, including scratch-resistant clear coats from Mercedes Benz, BMW, and Porsche, as well as more delicate vintage paints without a clear coat layer. Lake Country CCS Polishing Pads in Various Hardness Levels and Sizes Yellow: Designed for maximum cut, scratch, swirl, and oxidation removal. Perfect for quick paint defect corrections. Orange: Medium cut, removal of medium paint defects with good finishing. White: Fine cut, removal of final paint defects for high gloss finish. Black: Black finishing, very soft foam for high gloss polishes and for applying and processing waxes and sealants. The Lake Country CCS Pads Are Available in All Sizes: Velcro backing, polishing surface: 75/90mm, 90/101mm, 125/140mm, 150/165mm. Perfectly suitable for polishers from manufacturers like Flex, Rupes, Makita, Festool. Pad thickness: 22mm or 32mm. What Makes Lake Country Foam Pads So Unique? Extremely high durability and resulting smooth operation are notable features of Lake Country Pads. Especially with medium-cut and finishing, it is the excellent working feel provided by Lake Country foam that leads to consistently perfect results!

The Collapsed Cell Structure Pads, known as CCS Pads, have revolutionized uncompromising paint corrections. CCS Pads are flat foam polishing pads designed for dual-action and forced rotation polishers featuring a patented surface design. Importantly, CCS Pads are also suitable for rotary polishers, especially when their cutback shape offers a larger polishing surface on smaller backing plates. All CCS Pads available from the official distributor Chemical-Shark.de are produced in cutback form. Patented CCS Cell Structure Offers Numerous Benefits The surface of CCS Pads features small pockets with a closed cell structure inside, though the foam of the pad remains open-pored. This property allows for a much more economical use of polish with CCS Pads. The polish penetrates the pocket without saturating the pad, significantly extending usability. Additionally, the cell structure remains cooler, preventing the pad from drying out due to be drying polish. Suitable for All Paint Types: Lake Country CCS Pads from Chemical-Shark.de Also known among connoisseurs as "Smart Pads," these polishing pads are compatible with all paint types. This includes scratch-resistant clear coats from Mercedes Benz, BMW, and Porsche, as well as more delicate classic car paints without a clear coat. Lake Country CCS Pads Available in Various Hardness Levels and Sizes Yellow: Designed for maximum cut, scratch, swirl, and oxidation removal. Perfect for quick paint defect corrections. Orange: Medium cut, removes medium paint defects with a good finish. White: Fine, removes last paint defects for a high gloss finish. Black: Finishing, very soft foam for high gloss polishes and for applying and processing waxes and sealants. Lake Country CCS Pads Available in All Sizes: Hook-and-loop backing, polishing surface: 75/90mm, 90/101mm, 125/140mm, 150/165mm. Perfectly suitable for polishers from manufacturers like Flex, Rupes, Makita, Festool. Pad thickness: 22mm or 32mm. What Makes Lake Country Foam Pads Unique? High durability and resulting smooth operation are defining characteristics of Lake Country Pads. Particularly in Medium-Cut and Finishing, the excellent working feel provided by Lake Country foam leads to consistently perfect results!

The Collapsed Cell Structure (CCS) Pads by Lake Country have revolutionized the art of uncompromising paint corrections. CCS Pads are flat foam polishing pads designed for dual-action and forced rotation polishers with a patented surface design. It’s worth noting that these pads are also suitable for rotary polishers, especially when the cutback design accommodates a larger polishing area on a smaller backing plate. All CCS Pads available through the official distributor Chemical-Shark.de are produced in cutback form. Patented CCS Cell Structure Offers Numerous Advantages The surface of CCS Pads features small pockets whose inner section boasts a closed-cell structure, even though the foam is otherwise open-pored. This allows for a significant reduction in polish usage, as the polish penetrates the pocket but not the pad, enabling longer working times. Additionally, the cell structure stays cooler, preventing the pad from drying out due to the polish. Suitable for All Paint Types: Lake Country CCS Pads from Chemical-Shark.de Known among professionals as "Smart Pads", these polishing pads are compatible with all types of paints. This includes scratch-resistant clear coats from brands like Mercedes-Benz, BMW, and Porsche, as well as more sensitive classic car paints without a clear coat layer. Lake Country CCS Pads Available in Various Hardness Levels and Sizes Yellow: Designed for maximum cut, removing scratches, swirls, and oxidation. Ideal for quick paint defect corrections. Orange: Medium cut, effective for removing medium paint defects with good finishing. White: Fine, for removing final paint defects to achieve a high-gloss finish. Black: Soft foam for high-gloss polishes and for applying and processing wax and sealants. Lake Country CCS Pads Available in All Sizes: Velcro backing, polishing areas: 75/90mm, 90/101mm, 125/140mm, 150/165mm Perfectly suitable for polishers from manufacturers like Flex, Rupes, Makita, Festool. Pad thickness: 22mm or 32mm. What Makes Lake Country Foam Pads Unique? Exceptional durability and the resulting high smoothness are just some of the notable factors of Lake Country Pads. Especially during medium-cut and finishing tasks, it’s the remarkable work feel provided by Lake Country foam that leads to consistently perfect results!

Lake Country has revolutionized paint correction with its Collapsed Cell Structure (CCS) Pads. These flat foam polishing pads are designed for dual action and forced rotation polishers, featuring a patented surface design. Notably, the CCS Pads are also suitable for rotary polishers, especially when the Cutback design allows for a larger polishing area on smaller backing plates. All CCS Pads available from the official distributor Chemical-Shark.de are produced in Cutback form. Patented CCS Cell Structure Offers Numerous Benefits The surface of the CCS Pads is equipped with small pockets that have a closed cell structure inside, while the foam remains open-pored. This feature allows for a more economical use of polish, as the polish seeps into the pockets but not into the pad, leading to a more prolonged application. Simultaneously, the cell structure remains cooler, preventing the pad from drying out due to heat buildup. Suitable for All Types of Paint: Lake Country CCS Pads from Chemical-Shark.de Known among enthusiasts as "Smart Pads", these polishing pads are compatible with all types of paint, including scratch-resistant clear coats from brands like Mercedes Benz, BMW, and Porsche, as well as more sensitive classic car paints without a clear coat layer. Lake Country CCS Pads in Various Hardness Levels and Sizes Yellow: Designed for maximum cut, removing scratches, swirls, and oxidation. Perfect for quick paint defect corrections. Orange: Medium cut, for removing medium paint defects with good finishing. White: Fine cut for the removal of final paint defects and achieving a high-gloss finish. Black: Soft foam for high-gloss polishes and for applying and processing wax and sealants. Lake Country CCS Pads Available in All Sizes: Velcro backing, polishing surface: 75/90mm, 90/101mm, 125/140mm, 150/165mm. Perfect for polishing machines from Flex, Rupes, Makita, Festool. Pad thickness: 22mm or 32mm. What Makes Lake Country Foam Pads Unique? Extremely high durability and resulting operational stability are notable features of Lake Country Pads. Particularly in medium cut and finishing, it is the exceptional working feel provided by Lake Country foam that leads to consistently perfect results!

Specifically designed for mini polishers like the Flex PXE 80 and Rupes iBrid, plus upcoming iBrid successors, we offer Lake Country Force Hybrid Foam Pads. These pads feature an extremely dense foam similar to Lake Country’s HDO, SDO, and CCS pads, aiming to reduce polish consumption while delivering high cut. This foam maintains almost constant compression hardness even under intense heat.Perfect Fit for Flex PXE 80 and Rupes iBridWith a 17mm thickness and hook-and-loop backing sizes of 32mm and 52mm plus a concave profile, these pads are ideal for 30mm and 50mm backing plates on newer mini polishers from Flex and Rupes. The 52mm pad is especially perfect for the powerful Flex PXE 80 and works seamlessly with Detail Passion’s 50mm backing plate for rotary and DA use.Durable, High-Density Polishing FoamThanks to its highly compressed foam, the Force Hybrid Foam Pads are exceptionally durable and keep their shape, with thermal stress barely affecting compression hardness.Available in Multiple Cut Levels and SizesGrey: Maximum cut for fast removal of scratches, swirls, and oxidation—ideal for rapid paint correctionOrange: Medium cut offering solid defect removal with good finishingWhite: Fine for final defect removal and high-gloss finishBlack: Ultra-soft for black finishing, wax, and sealant applicationAvailable Sizes Stocked:Hook-and-loop backing diameters: 32/41mm and 52/60mmPerfectly suited for mini polishers like Flex PXE 80 and Rupes iBridPad thickness: 17mmWhat Makes Lake Country Foam Pads Stand Out?Lake Country pads are known for extreme durability and smooth operation. Especially for medium cut and finishing, their superior feel ensures consistently perfect results!Other sizes and cuts are available. Contact us for inquiries.

Designed specifically for mini polishers like Flex PXE 80 and Rupes iBrid including future iBrid models, the Lake Country Force Hybrid Foam Pads feature an ultra-dense foam known from Lake Country's renowned HDO, SDO, and CCS pads. This advanced foam reduces compound consumption while delivering high cut performance. Its consistent compression hardness stays stable even under intense heat.Perfect Fit for Flex PXE 80 & Rupes iBridWith a thickness of 17mm and hook-and-loop diameters of 32mm and 52mm plus a concave profile, these pads are tailored for 30mm and 50mm backing plates on newer Flex and Rupes mini polishers. Especially the 52mm size is ideal for the powerful Flex PXE 80 and works smoothly with Detail Passion's 50mm backing plate for rotary and dual-action use.Durable, High-Density Polishing FoamThe highly compacted foam ensures Force Hybrid Pads last long without losing shape. Even heavy thermal stress barely affects their compression firmness.Available in Multiple Cuts and SizesGray: Maximum cut for heavy scratch, swirl, and oxidation removal – perfect for fast paint defect correctionOrange: Medium cut, targeting moderate paint defects with good finish qualityWhite: Fine, for final defect removal and glossy finishBlack: Soft black finishing foam ideal for high-gloss polishes, waxes, and sealants applicationStocked Sizes and SpecificationsHook-and-loop backing diameters: 32/41mm, 52/60mmIdeal for mini polishers like Flex PXE 80 and Rupes iBridPad thickness: 17mmWhat Makes Lake Country Foam Pads Unique?Exceptional durability and smooth running are key features of Lake Country pads. Especially in medium-cut and finishing stages, their superior feel ensures consistently perfect results!Lake Country Force Hybrid Foam Pads are available in other sizes too. Contact us for inquiries.

Lake Country Glass Polishing Pads are exclusively designed for polishing scratches on real glass. The compressed white surface effectively removes scratches, water stains, lime spots, etchings, and other defects on windshields and side windows when used with a glass polish. Polish Glass Scratches: Achieve Results Faster with Lake Country Glass Polishing Pads While glass is fragile, it is one of the hardest materials to work with in modern car care. Lake Country has developed glass polishing pads specifically designed to tackle the challenges of polishing glass, suitable for both rotary and dual-action applications. Using CerOxide-based polishing compounds, glass surfaces can be quickly restored from scratches, haziness, and other defects. Lake Country Glass and Window Polishing Pads from Chemical-Shark.de Car Care Shop We supply Lake Country glass polishing pads in various sizes and recommend using Sonax ProfiLine Glass Polish, which is also available from us for polishing.

The high-quality foam combined with a dual-layer system makes the HDO pads from Lake Country Manufacturing stand out. The two different properties of the foams combine the benefits of thin and thick pads. The light gray layer reduces lateral or horizontal movement, thus decreasing friction heat, which can quickly become problematic with powerful orbital and forced rotation polishers. The polishing foam itself, marked by different hardness and abrasiveness, is naturally resistant to heat and material fatigue. Nevertheless, the dual-layer concept provides even more consistent polishing results than the cheaper SDO pads, which lack the cooling and torsion-free layer. Top-Level Pressure Distribution and Design: Lake Country HDO Pads From 130mm, the Lake Country HDO pads feature a heat-dissipating center chamber with a cooling hole for enhanced cooling and precise positioning. While the Lake Country HDO pads are 30-40% more expensive than the newer SDO pads, the price difference is justified, especially when using forced rotation machines like the Flex XCE 10-8 or the Rupes LK900e Mille. Lake Country foams are also resilient and easier to clean when using newer high-performance polishes like Rupes D-A Coarse Compound, Sonax Ultimate Cut 6-3, and Sonax CutMax abrasive paste. Optimized for Consistent Polishing Performance and High Durability: Lake Country HDO at Chemical-Shark.de The high-quality foam of the SDO and HDO polishing pads ensures consistent polishing performance and high durability. Even with high stroke and oscillation speeds, as with the Rupes LHR21e Mark III, the pads remain stable and run smoothly. The HDO Pads are Available in 3 Different Foam Options Blue: Designed for maximum cut, scratch, swirl, and oxidation removal. Perfect for quick paint defect corrections Orange: Medium cut, removes medium paint defects with good finishing Black: Black finishing, very soft foam for high-gloss polishes and for applying and processing waxes and sealants Lake Country HDO Pads are Available in All Sizes: Hook-and-loop backing, polishing surface: 80/90mm, 130/140mm, 150/165mm Thickness of pad: 22mm Foam: Cutting blue, medium cut orange, finishing black What Makes Lake Country Foam Pads Unique? Extremely high durability and resulting smooth operation are notable features of Lake Country pads. Especially with medium cut and finishing, it's the exceptional working feel that Lake Country foam provides, leading to consistently perfect results!

The high-quality foam combined with a dual-layer system makes Lake Country Manufacturing's HDO pads exceptional. The combination of thin and thicker pad benefits is achieved with the two different foam characteristics. The light gray layer reduces lateral and horizontal movement, minimizing friction heat—a common issue with powerful rotary and dual-action polishers. The polishing foam, color-coded for varying hardness and abrasiveness, is naturally resistant to heat and material fatigue. However, the dual-layer concept offers even more consistent polishing outcomes than the cheaper SDO pads, which lack the cooling and torsion-free layer. Pressure Distribution and Shape Design at its Best: Lake Country HDO Pads From 130mm, the Lake Country HDO pads are equipped with a heat-dissipating center chamber that features a cooling hole for precision positioning. Although the Lake Country HDO pads are 30-40% more expensive than the newer Lake Country SDO pads, the price difference is justified, especially with forced rotary machines like the Flex XCE 10-8 or the Rupes LK900e Mille. Lake Country foams are also easy to clean and resistant when using newer high-performance polishes such as Rupes D-A Coarse Compound, Sonax Ultimate Cut 6-3, and Sonax CutMax polish. Optimized for Consistent Polishing Performance and High Durability: Lake Country HDO at Chemical-Shark.de The premium foam of the SDO and HDO polishing pads ensures consistent polishing performance and high durability. Even with large strokes and high oscillation speeds, such as with the Rupes LHR21e Mark III, the pads remain shape-stable and balanced. The HDO Pads Are Available in 3 Different Foam Types Blue: Designed for maximum cut, scratch, swirl, and oxidation removal. Perfect for quick paint defect corrections. Orange: Medium cut, effectively removes moderate paint defects while providing good finishing. Black: Black finishing, very soft foam for high-gloss polishing and for applying and processing waxes and sealants. The Lake Country HDO Pads Are Available in All Sizes Hook-and-loop backing, polishing area: 80/90mm, 130/140mm, 150/165mm Pad thickness: 22mm Foam types: Cutting blue, Medium cut orange, Finishing black What Makes Lake Country Foam Pads Unique? Exceptional durability and resulting smooth operation are key factors of Lake Country pads. Especially in medium cut and finishing, it is the remarkable working feel that Lake Country foam provides, leading to consistently perfect results!

The high-quality foam combined with a two-layer system makes Lake Country Manufacturing HDO pads exceptional. By utilizing two different foam properties, the benefits of both thin and thick pads are combined. The light grey layer helps reduce lateral or horizontal movement, thereby minimizing friction heat—a common issue with powerful eccentric and forced random orbital polishers. The polishing foam itself, available in various hardnesses and abrasiveness levels, is inherently resistant to heat and material fatigue. Nevertheless, the two-layer concept provides even more consistent polishing results compared to the cheaper SDO pads, which lack the cooling and rigid layer. Pressure Distribution and Design at the Highest Level: Lake Country HDO Pads From 130mm, the Lake Country HDO pads feature a heat-dissipating center chamber with a drilling hole for additional cooling and precise positioning. While Lake Country HDO pads are 30-40% more expensive than the newer Lake Country SDO pads, this price difference is justified when using forced dual action polishers like the Flex XCE 10-8 or Rupes LK900e mille. Lake Country foams are also resistant and easier to clean when using newer high-performance polishes like Rupes D-A Coarse Compound, Sonax Ultimate Cut 6-3, and Sonax CutMax abrasive paste. Optimized for Consistent Polishing Performance and High Durability: Lake Country HDO at Chemical-Shark.de The high-quality foam in the SDO and HDO polishing pads ensures consistent polishing performance and high durability. Even with large strokes and high oscillation frequencies, such as with the Rupes LHR21e Mark III, the pads remain stable and balanced. The HDO Pads are Available in 3 Different Foams Blue: Designed for maximum cut, removing scratches, swirls, and oxidation. Perfect for quick paint defect corrections. Orange: Medium cut, removing medium paint defects while providing good finishing. Black: Black finishing, very soft foam for high-gloss polishing and for applying and processing waxes and sealants. We Stock All Available Sizes of Lake Country HDO Pads: Hook-and-loop backing, polishing area: 80/90mm, 130/140mm, 150/165mm Pad thickness: 22mm Foam types: Cutting blue, Medium Cut orange, Finishing black What Makes Lake Country Foam Pads Unique? Extremely high durability and resulting smooth operation are key characteristics of Lake Country pads. Particularly in medium cut and finishing, it is the exceptional work feel that Lake Country foam provides, leading to consistently perfect results!

The high-quality foam combined with a two-layer system makes the HDO pads from Lake Country Manufacturing stand out. With the unique properties of the used foams, the advantages of both thin and thicker pads are combined. The light gray layer reduces lateral and horizontal movement, thus minimizing friction heat which can quickly become problematic with powerful dual-action and forced rotation polishers. The polishing foam, available in various hardness levels and abrasiveness, is inherently resistant to heat and material fatigue. However, the two-layer concept ensures even more consistent polishing results compared to the cheaper SDO pads that lack the cooling and torsion-free layer. Top-Class Pressure Distribution and Design: Lake Country HDO Pads From 130mm, the Lake Country HDO pads feature a heat-dissipating center chamber with a cooling hole for precise positioning. Although the Lake Country HDO pads are 30-40% pricier than the newer Lake Country SDO pads, the price difference is justified when used with forced rotation models like the Flex XCE 10-8 or the Rupes LK900e Mille. Lake Country foams are also resistant and easier to clean with newer high-performance polishes like the Rupes D-A Coarse Compound, Sonax Ultimate Cut 6-3, and Sonax CutMax abrasive paste. Optimized for Consistent Polishing Performance and High Durability: Lake Country HDO at Chemical-Shark.de The high-quality foam of the SDO and HDO polishing pads ensures consistent polishing performance and high durability. Even with a large stroke and high oscillation rate, such as with the Rupes LHR21e Mark III, the pads remain shape-stable and run smoothly. The HDO Pads Are Available in 3 Different Foam Types Blue: Designed for maximum cut, scratch, swirl, and oxidation removal. Perfect for quick paint defect corrections Orange: Medium cut, for removing medium paint defects with good finishing Black: Soft foam for high-gloss polishing and applying and processing waxes and sealants The Lake Country HDO Pads Are Offered in All Available Sizes: Hook-and-loop backing, polishing surface: 80/90mm, 130/140mm, 150/165mm Pad thickness: 22mm Foam types: Cutting blue, Medium Cut orange, Finishing black What Makes Lake Country Foam Pads So Unique? Extremely high durability and resulting smooth operation are key features of Lake Country pads. Particularly with medium cut and finishing, it’s the exceptional feel of the Lake Country foam that leads to consistently perfect results!

The high-quality foam combined with a dual-layer system makes Lake Country's HDO pads exceptional. The different properties of the used foams combine the benefits of thin and thick pads. The light gray layer reduces lateral or horizontal movement, thereby minimizing friction heat that can become problematic with powerful orbitals and forced rotation polishers. The polishing foam, marked by color according to different hardness levels and abrasiveness, is inherently resistant to heat and resulting material fatigue. Nevertheless, the dual-layer concept ensures more consistent polishing results compared to the cheaper SDO pads, which lack the cooling and torsion-free layer. Pressure Distribution and Design Innovation: Lake Country HDO Pads Starting from 130mm, the Lake Country HDO pads feature a heat-dissipating center chamber with a cooling hole for precise positioning. The Lake Country HDO pads are 30-40% more expensive than the newer Lake Country SDO pads; however, the price difference is justified, especially when used with forced rotation polishers like the Flex XCE 10-8 or Rupes LK900e Mille. Lake Country foams are also resistant and easier to clean when using newer high-performance polishes such as Rupes D-A Coarse Compound, Sonax Ultimate Cut 6-3, and Sonax CutMax grinding paste. Optimized for Consistent Polishing Performance and High Durability: Lake Country HDO at Chemical-Shark.de The high-quality foam of the SDO and HDO polishing pads ensures consistent polishing performance and high durability. Even under high stroke and rapid oscillation, like with the Rupes LHR21e Mark III, the pads remain stable and run smoothly. HDO Pads Available in 3 Distinct Foam Types Blue: Designed for maximum cut, removing scratches, swirls, and oxidation. Perfect for quick paint defect corrections. Orange: Medium cut, effective for removing moderate paint defects with good finishing. Black: Black finishing, very soft foam for high gloss polishing and applying and processing waxes and sealants. Lake Country HDO Pads Available in All Sizes: Velcro backing, polishing surface: 80/90mm, 130/140mm, 150/165mm Pad thickness: 22mm Foam types: Cutting blue, medium cut orange, finishing black What Makes Lake Country Foam Pads Unique? Extreme durability and resulting high running smoothness are key characteristics of Lake Country pads. Particularly in medium cut and finishing, it’s the exceptional working feel that Lake Country foam provides, leading to consistently perfect results!

The high-quality foam combined with a dual-layer system makes the Lake Country HDO pads truly special. By utilizing different types of foam, the benefits of thinner and thicker pads are effectively merged. The light gray layer reduces lateral or horizontal movement and thus friction heat, which can quickly become problematic with powerful dual-action and forced rotation polishers. The polishing foam, which is color-coded in various hardness and abrasiveness levels, is inherently resistant to heat and material fatigue. Nonetheless, the dual-layer concept provides even more consistent polishing results compared to the cheaper SDO pads, which lack the cooling and torsion-free layer. Pressure Distribution and Design at the Highest Level: Lake Country HDO Pads From 130mm upwards, the Lake Country HDO pads feature a heat-dissipating center chamber with a milling hole for additional cooling and precise positioning. Although Lake Country HDO pads are 30-40% higher in price than the newer Lake Country SDO pads, the price difference is justified especially when used with forced rotation polishers such as the Flex XCE 10-8 or the Rupes LK900e mille. Additionally, Lake Country foams are resistant and easier to clean when using newer high-performance polishes like Rupes D-A Coarse Compound, Sonax Ultimate Cut 6-3, and Sonax CutMax grinding paste. Optimized for Consistent Polishing Performance and High Durability: Lake Country HDO at Chemical-Shark.de The high-quality foam of the SDO and HDO polishing pads ensures a consistent polishing performance and high durability. Even with large stroke and high oscillation rates, such as with the Rupes LHR21e Mark III, the pads remain stable in shape and run smoothly. The HDO Pads are Available in 3 Different Foams Blue: Designed for maximum cut, removing scratches, swirls, and oxidation. Perfect for quick paint defect corrections. Orange: Medium cut, removing moderate paint defects with a good finish. Black: Black finishing, very soft foam for high-gloss polishes and for applying and processing wax and sealants. We Stock All Available Sizes of Lake Country HDO Pads: Hook and loop back, polishing surface: 80/90mm, 130/140mm, 150/165mm Thickness of the pad: 22mm Foam: Cutting blue, medium cut orange, finishing black What Makes Lake Country Foam Pads Unique? Extremely high durability and resulting high runnability are justifiable factors of the Lake Country pads. Particularly in medium cut and finishing, it is the exceptional working feel that Lake Country foam provides, leading to consistently perfect results!

With the new HDO CCS Pads, industry leader Lake Country combines two of its best technologies for top-notch polishing work. HDO Pads have long set an unmatched benchmark in the industry due to their resilient foams, heat dissipation, and pressure consistency. HDO stands for "Heavy Duty Orbital", indicating that this technology is predominantly designed for modern dual-action and forced-rotation polishers. Another key technology supplied by Lake Country is CCS, which stands for Collapsed Cell Structure. The surface of CCS pads features small pocketed areas, where the interior exhibits a closed cell structure, even though the pad foam is otherwise open-pored. This allows for more efficient polish usage, as the polish penetrates the pocket but does not saturate the pad, enabling a longer working time. Simultaneously, the cell structure benefits from better cooling, preventing the pad from drying out due to polish residues. With the new HDO CCS Pads, both technologies are available in a single pad series. The US manufacturer surprises the market, as the production cost of these pads is at the same price level as regular HDO pads. Optimal Pressure Distribution and Design: Lake Country HDO CCS Pads From 130mm, Lake Country HDO CCS Pads are equipped with a heat-dissipating middle chamber, featuring a cut-out for further cooling and precise positioning. Although Lake Country HDO CCS Pads are 30-40% more expensive than the newer Lake Country SDO Pads, the price difference is justified when used with forced-rotation polishers like the Flex XCE 10-8 or the Rupes LK900e Mille. Lake Country foams are also resistant and easier to clean when using newer high-performance polishes such as 3D ACA-XTRA 510 or 3D One Hybrid. Optimized for Consistent Polishing Performance and High Durability: Lake Country HDO CCS at Chemical-Shark.de The high-quality foam of SDO and HDO polishing pads ensures consistent polishing performance and high durability. Even with a large stroke and high oscillation rate, such as with the Rupes LHR21e Mark III, the pads remain stable and balanced. The HDO CCS Pads Are Available in 3 Different Foams Blue: Designed for maximum cutting, scratches, swirl, and oxidation removal. Perfect for quick paint defect corrections. Orange: Medium cut, removes medium paint defects with good finishing. Black: Black finishing, very soft foam for high-gloss polishes and applying and processing waxes and sealants. Lake Country HDO CCS Pads Available in All Sizes: Hook-and-loop backing, polishing surface: 80/90mm, 130/140mm, 150/165mm Pad thickness: 25mm Foams: Cutting blue, medium cut orange, finishing black What Makes Lake Country Foam Pads Unique? Great durability and resulting smooth performance are key factors that define Lake Country pads. Particularly in medium-cut and finishing, it is the exceptional working feel that Lake Country foam provides, leading to consistently perfect results!

Designed for maximum cut, the Lake Country microfiber pads from the HDO series are top-notch. Featuring a unique foam backing for reduced lateral movement and friction heat, these pads are ideal for high-performance dual-action and rotary polishers. The microfiber materials, available in various densities and abrasiveness, resist heat and material fatigue. Created for quick scratch and defect correction, these pads maintain their integrity even under heavy use with Rupes and Flex machines, justifying their higher price point. Unmatched Pressure Distribution and Design: Lake Country HDO Pads Starting from 130mm, the Lake Country HDO microfiber pads come equipped with a heat-dissipating center chamber, including a cooling hole for precise positioning. Although the HDO pads are 30-40% more expensive than the newer SDO pads, this cost is justified when used with forced rotation machines like the Flex XCE 10-8 or Rupes LK900e Mille. The Lake Country microfiber pads are also easier to clean when paired with advanced polishes like Rupes D-A Coarse Compound, Sonax Ultimate Cut 6-3, and Sonax CutMax. Lake Country HDO Microfiber Pads Available in Two Abrasiveness Levels The HDO series microfiber pads come in different abrasiveness levels. The blue-backed pad provides maximum cut and acceptable gloss results. The orange-backed pad offers slightly less cut but good gloss results, making it suitable for one-step paint corrections with the right polish. Available in Three Different Foam Types HDO microfiber pad with blue backing: Designed for maximum cut, effective in scratch, swirl, and oxidation removal. Perfect for quick paint defect corrections. HDO microfiber pad with orange backing: Medium cut, suitable for correcting moderate paint defects with good finishing, ideal for one-step corrections. All Sizes of Lake Country HDO Pads Available in Stock: Hook & Loop, Polish Surface: 80/90mm, 130/140mm, 150/165mm Pad Thickness: 13mm What Makes Lake Country Foam Pads Unique? Exceptional durability leading to unmatched smooth operation are key attributes of Lake Country pads. Particularly in medium-cut and finishing applications, the superior working feel provided by Lake Country foam leads to consistently perfect results!

Engineered for maximum cut, the Lake Country HDO microfiber pads feature a specially designed foam backing that minimizes lateral and horizontal movement, reducing friction heat that can be problematic with high-powered dual action and forced rotation polishers. The microfiber material is resistant to heat and material fatigue, designed for rapid correction of scratches and defects. Despite the intense workload when paired with high-performance polishers like Rupes and Flex, Lake Country microfiber pads are highly durable, justifying their premium price. Pressure Distribution and Design Excellence: Lake Country HDO Pads Starting from 130mm, the Lake Country HDO microfiber pads are designed with a heat-dissipating center chamber and a cooling hole for precise positioning. While the HDO pads are 30-40% more expensive than the newer Lake Country SDO pads, the price difference is justified, especially when used with forced rotation polishers like the Flex XCE 10-8 or the Rupes LK900e Mille. Lake Country microfibers are also less sensitive and easier to clean with newer high-performance polishes such as Rupes D-A Coarse Compound, Sonax Ultimate Cut 6-3, and Sonax CutMax grinding paste. Lake Country HDO Microfiber Pads Available in Two Abrasiveness Levels Lake Country's HDO series microfiber pads are available in different abrasiveness levels. The blue backing pad provides maximum cut with an acceptable gloss result. The orange backing pad offers slightly less cut but still achieves a good gloss finish. With the right polish, the "orange" microfiber pad is suitable for one-step paint corrections. The HDO Pads Come in Three Different Foam Variants HDO microfiber pad with blue backing: Designed for maximum cut, ideal for removing scratches, swirls, and oxidation. Perfect for quick paint defect corrections. HDO microfiber pad with orange backing: Medium cut, for removing moderate paint defects while providing good finishing, suitable for one-step paint corrections. Available Sizes for Lake Country HDO Pads Velcro backing, polishing area: 80/90mm, 130/140mm, 150/165mm Pad thickness: 13mm What Makes Lake Country Foam Pads Unique? The extreme durability and resulting high stability are key traits of Lake Country pads. Especially with medium cut and finishing applications, it’s the exceptional working feel that Lake Country foam provides, leading to consistently perfect results!

Designed for maximum cut, the Lake Country microfiber pads from the HDO series feature a special foam backing. This helps reduce lateral or horizontal movement and minimizes friction heat, which can quickly become problematic with high-performance dual-action and forced rotation polishers. The microfiber materials, available in various hardnesses and abrasiveness levels, are resistant to heat and material fatigue. The microfibers are optimized for high cut, allowing for rapid scratch and defect correction. Despite the intense use, especially in combination with high-performance polishers from Rupes and Flex, the Lake Country microfiber pads are extremely durable, justifying the higher price. Top-Level Pressure Distribution and Design: Lake Country HDO Pads Starting from 130mm, the Lake Country HDO microfiber pads come with a heat-dissipating center chamber and a milling hole for additional cooling and precise positioning. Although the Lake Country HDO pads are 30-40% more expensive than the newer Lake Country SDO pads, the price difference is justified when used with forced rotation machines such as the Flex XCE 10-8 or the Rupes LK900e mille. Lake Country microfibers are also resistant and easier to clean when using newer high-performance polishes like Rupes D-A Coarse Compound, Sonax Ultimate Cut 6-3, and Sonax CutMax abrasive paste. Lake Country HDO Microfiber Pads Available in Two Abrasiveness Levels The microfiber pads from the HDO series by Lake Country are available in different abrasiveness levels. The pad with a blue backing provides maximum cut and an acceptable gloss finish, while the pad with an orange backing offers slightly less cut but still delivers a good gloss result. With the right polish, the "orange" microfiber pad can be used for one-step paint corrections. The HDO Pads Come in 3 Different Foam Types HDO microfiber pad with blue backing: Designed for maximum cut, removes scratches, swirls, and oxidation. Perfect for quick paint defect corrections. HDO microfiber pad with orange backing: Medium cut, removes moderate paint defects with good finishing, suitable for one-step paint corrections. We Stock Lake Country HDO Pads in All Available Sizes: Hook and loop backing, polishing surface: 80/90mm, 130/140mm, 150/165mm Pad thickness: 13mm What Makes Lake Country Foam Pads Unique? Extremely high durability and excellent stability contribute to the unique characteristics of the Lake Country pads. Particularly during medium-cut and finishing, it is the exceptional working feel that Lake Country foam provides, leading to consistently perfect results!

Lake Country HDO Microfiber Finish Pad BlackThe Lake Country HDO Microfiber Finish Pad is designed as a dedicated finishing pad, perfectly complementing the existing HDO and Microfiber lines. Alongside the One-Step and Cutting Microfiber Pads, this exclusive microfiber finish pad rounds out the series, crafted for maximum gloss performance. It delivers an exceptionally clear, brilliant finish on demanding paint surfaces.Microfiber finish pad completing the HDO & Microfiber seriesIdeal for delicate paints where foam finish pads reach their limitsEngineered for maximum surface clarity and high glossAvailable in larger sizes with a center hole for enhanced coolingPerfect high-gloss finish on sensitive paintsThe HDO Microfiber Finish Pad is perfect for soft, sensitive, and challenging paints where traditional foam finish pads fail to deliver a truly clean high-gloss finish. Its fine microfiber structure ensures even polish distribution, visibly enhancing paint clarity while minimizing haze and micro-marring. Paired with modern finishing and high-gloss polishes, it achieves a very precise, hologram-free final result. Larger versions feature a center hole to dissipate heat better, optimizing cooling during polishing and increasing safety on delicate surfaces.

Lake Country HDO Microfiber Finish Polishing Pad BlackThe Lake Country HDO Microfiber Finish Pad is designed purely as a finish pad, perfectly complementing the existing HDO and Microfiber lines. Alongside the One-Step and Cutting microfiber pads, this is the first dedicated microfiber finish pad available, completing the series and crafted specifically for maximum gloss performance. It delivers an exceptionally clear, brilliant finish on demanding paint surfaces.Microfiber finish pad to round off the HDO & Microfiber seriesIdeal for delicate paints where foam finish pads reach their limitsEngineered for maximum surface clarity and high glossAvailable in larger sizes with a center hole for improved coolingPerfect High Gloss Finish on Sensitive PaintsThe HDO Microfiber Finish Pad is perfect for soft, delicate, and challenging paints where classic foam finish pads can’t deliver a truly clean high gloss finish. Its fine microfiber structure ensures even polish distribution and enhances paint clarity visibly while minimizing risks of haze or micro marring. Paired with modern finish and high-gloss polishes, it produces an extremely precise, hologram-free final result. Larger sizes come with an integrated center hole to enhance heat dissipation and cooling during polishing, increasing safety on sensitive paints.

Designed for maximum cut, the Lake Country HDO microfiber pads are top performers. Utilizing a special foam backing plate, these pads reduce lateral and horizontal movement, minimizing friction heat that can become problematic with powerful dual action and force rotation polishers. The microfiber material, available in various hardness and abrasiveness levels, is resistant to heat and material fatigue. These fibers are engineered for high cut efficiency, enabling quick correction of scratches and defects. Despite the high loads typically experienced with high-performance polishers from Rupes and Flex, these pads remain durable, justifying their higher price point. Top-Level Pressure Distribution and Design: Lake Country HDO Pads Starting from 130mm, the Lake Country HDO microfiber pads feature a heat-dissipating center chamber and a cooling hole for precise positioning. While the HDO pads are 30-40% pricier than the newer SDO pads, this price difference is justified especially when used with forced oscillation polishers like the Flex XCE 10-8 or the Rupes LK900e mille. Lake Country microfibers are also resistant and easier to clean when using advanced polishes such as Rupes D-A Coarse Compound, Sonax Ultimate Cut 6-3, and Sonax CutMax abrasive paste. Lake Country HDO Microfiber Pads in Two Abrasiveness Levels The HDO series microfiber pads from Lake Country are available in different abrasiveness levels. The pad with blue backing provides maximum cut and acceptable gloss results. The pad with orange backing offers slightly less cut but still achieves good gloss results. With the right polish, the "orange" microfiber pad is perfect for one-step paint corrections. The HDO Pads Are Available in 3 Different Foam Types HDO microfiber pad with blue backing: Designed for maximum cut, effective for scratch, swirl, and oxidation removal. Perfect for quick paint defect corrections. HDO microfiber pad with orange backing: Medium cut, effectively removes medium paint defects while providing a good finish, suitable for one-step paint corrections. We Stock All Available Sizes of Lake Country HDO Pads: Hook and loop backing, polishing surface: 80/90mm, 130/140mm, 150/165mm Pad thickness: 13mm What Makes Lake Country Foam Pads Unique? Extreme durability and resulting high stability are notable characteristics of Lake Country pads. Particularly in medium cut and finishing, it’s the excellent working feel that Lake Country foam provides, leading to consistently perfect results!

Designed for maximum cut, Lake Country's HDO microfiber pads are top-of-the-line. Utilizing a special foam backing plate, these pads significantly reduce lateral and horizontal movement, thereby minimizing frictional heat, which can become problematic with powerful dual-action and forced rotation polishers. The microfiber fibers, available in various hardness levels and abrasiveness, are resistant to heat and material fatigue. These pads are optimized for high cut, ensuring quick correction of scratches and defects. Despite the high demands when used with powerful polishers like Rupes and Flex, Lake Country microfiber pads are exceptionally durable, justifying their higher price. Superior Pressure Distribution and Design: Lake Country HDO Pads Starting from 130mm, the Lake Country HDO microfiber pads feature a heat-dissipating center chamber with a cooling hole for precise positioning. Though the HDO pads are 30-40% more expensive than the newer Lake Country SDO pads, the price difference is warranted, especially when used with forced rotation models like the Flex XCE 10-8 or the Rupes LK900e mille. Lake Country microfibers are also more resistant and easier to clean when paired with newer high-performance polishes such as Rupes D-A Coarse Compound, Sonax Ultimate Cut 6-3, and Sonax CutMax abrasive paste. Lake Country HDO Microfiber Pads Available in Two Abrasiveness Levels The microfiber pads from Lake Country's HDO series are available in different abrasiveness levels. The pad with the blue backing offers maximum cut and achieves an acceptable gloss result. The pad with the orange backing provides slightly less cut but still delivers a good gloss finish. With the right polish, the "orange" microfiber pad can be used for one-step paint corrections. The HDO Pads Come in Three Different Foam Types HDO Microfiber Pad with Blue Backing: Designed for maximum cut, ideal for scratch, swirl, and oxidation removal. Perfect for quick paint defect corrections. HDO Microfiber Pad with Orange Backing: Medium cut, removes moderate paint defects while providing good finishing, suitable for one-step paint corrections. The Lake Country HDO Pads are Available in All Sizes: Hook-and-loop backing, polishing surface: 80/90mm, 130/140mm, 150/165mm Pad thickness: 13mm What Makes Lake Country Foam Pads Unique? Extreme durability and high operational smoothness are standout features of Lake Country pads. Particularly in medium cut and finishing, the exceptional working feel of Lake Country foam leads to consistently perfect results!

Engineered for maximum cut, the Lake Country microfiber pads from the HDO series utilize a specialized foam backing. This design reduces lateral movement and friction heat, critical when using powerful dual-action and forced rotation polishers. The microfiber used is resistant to heat and material fatigue and is designed for rapid scratch and defect correction. Despite the considerable strain, especially when paired with high-performance polishers from Rupes and Flex, Lake Country microfiber pads offer exceptional durability, justifying their higher price tag. Premium Pressure Distribution and Design: Lake Country HDO Pads Starting from 130mm, Lake Country HDO microfiber pads feature a heat-dissipating center chamber and a cooling hole for precise positioning. While they are 30-40% more expensive than the newer Lake Country SDO pads, the price difference is justified when used with forced rotation polishers like the Flex XCE 10-8 or Rupes LK900e mille. Lake Country microfibers are also resistant and easier to clean with newer high-performance polishes like Rupes D-A Coarse Compound, Sonax Ultimate Cut 6-3, and Sonax CutMax grinding paste. Lake Country HDO Microfiber Pads Available in Two Abrasiveness Levels The HDO series microfiber pads from Lake Country come in different abrasiveness levels. The blue-backed microfiber pad delivers maximum cut and an acceptable gloss finish. The orange-backed microfiber pad provides slightly less cut but already achieves good gloss results. With the appropriate polish, the "orange" microfiber pad can be used for one-step paint corrections. The HDO Pads Available in Three Unique Foam Types HDO microfiber pad with blue backing: Designed for maximum cut, removal of scratches, swirls, and oxidation. Ideal for quick paint defect corrections. HDO microfiber pad with orange backing: Medium cut, removes moderate paint defects with good finishing, suitable for one-step paint corrections. We stock Lake Country HDO Pads in all available sizes: Hook and loop backing, polishing area: 80/90mm, 130/140mm, 150/165mm Pad thickness: 13mm What Makes Lake Country Foam Pads So Unique? Extreme durability and resulting smooth operation are key traits of Lake Country pads. Especially in medium-cut and finishing applications, it is the excellent working feel provided by Lake Country foam that leads to consistently perfect results!

The high-quality foam combined with a two-layer system makes Lake Country Manufacturing's HDO pads exceptional. With the differing properties of the foams used, the benefits of thin and thick pads are combined. The light gray layer reduces lateral or horizontal movement, thereby minimizing friction heat, which can quickly become problematic with powerful dual-action and forced rotation polishers. The polishing foam, marked by different hardness and abrasiveness colors, is inherently heat resistant and does not easily weaken. Nonetheless, the two-layer concept provides more consistent polishing results compared to the cheaper SDO pads, which lack the cooling and distortion-free layer. Pressure Distribution and Design at the Highest Level: Lake Country HDO Pads From 130mm onwards, Lake Country HDO pads feature a heat-dissipating center chamber with a cooling hole for precise positioning. Although Lake Country HDO pads are 30-40% more expensive than the newer Lake Country SDO pads, the price difference is justified when using forced rotation machines such as the Flex XCE 10-8 or the Rupes LK900e Mille. Lake Country foams are also resistant and easier to clean when using newer high-performance polishes such as Rupes D-A Coarse Compound, Sonax Ultimate Cut 6-3, and Sonax CutMax abrasive paste. Optimized for Consistent Polishing Performance and High Durability: Lake Country HDO at Chemical-Shark.de The high-quality foam of SDO and HDO polishing pads ensures consistent polishing performance and high durability. Even under high stroke and oscillation frequencies, such as with the Rupes LHR21e Mark III, the pads remain stable and run smoothly. The HDO Pads are Available in 3 Different Foam Types Blue: Designed for maximum cut, scratch, swirl, and oxidation removal. Perfect for quick paint defect corrections. Orange: Medium cut, removes moderate paint defects while providing good finishing. Black: Black finishing, very soft foam for high-gloss polishes and for applying and processing wax and sealants. The Lake Country HDO Pads are available in all sizes: Hook-and-loop backing, polishing surface: 80/90mm, 130/140mm, 150/165mm Pad thickness: 22mm Foam types: Cutting blue, Medium cut orange, Finishing black What Makes Lake Country Foam Pads Unique? Extremely high durability and the resulting smooth operation are notable features of Lake Country pads. Especially for medium-cut and finishing, it is the exceptional working feel that Lake Country foam provides, leading to consistently perfect results!

The high-quality foam combined with a two-layer system makes the HDO pads from Lake Country Manufacturing stand out. By utilizing two different foam properties, the benefits of thin and thicker pads are combined. The light gray layer reduces lateral or horizontal movement and thus friction heat, which can become problematic with powerful rotary and dual action polishers. The actual polishing foam, color-coded for various hardness and abrasiveness, is inherently resistant to heat and material fatigue. However, the two-layer concept provides even more consistent polishing results compared to the cheaper SDO pads, which lack the cooling and torsion-free layer. Top-Level Pressure Distribution and Design: Lake Country HDO Pads Starting from 130mm, the Lake Country HDO pads are equipped with a heat-dissipating center chamber and a cooling hole for precise positioning. While the Lake Country HDO pads are 30-40% more expensive than the newer Lake Country SDO pads, the price difference is justified, especially when used with forced rotation polishers like the Flex XCE 10-8 or the Rupes LK900e mille. Moreover, Lake Country foams are more resistant and easier to clean when used with newer high-performance polishes such as Rupes D-A Coarse Compound, Sonax Ultimate Cut 6-3, and Sonax CutMax grinding paste. Optimized for Consistent Polishing Performance and Durability: Lake Country HDO at Chemical-Shark.de The high-quality foam of the SDO and HDO polishing pads ensures consistent polishing performance and high durability. Even with large stroke and high oscillation rates, such as with the Rupes LHR21e Mark III, the pads remain stable and run smoothly. The HDO Pads are Available in 3 Different Foams Blue: Designed for maximum cut, removing scratches, swirls, and oxidation. Perfect for quick paint defect corrections. Orange: Medium cut, removing moderate paint defects with good finishing. Black: Black finishing, very soft foam for high-gloss polishes and for applying and processing wax and sealants. Lake Country HDO Pads are Available in All Sizes: Hook and loop backing, polishing area: 80/90mm, 130/140mm, 150/165mm Pad thickness: 22mm Foam: Cutting blue, Medium cut orange, Finishing black What Makes Lake Country Foam Pads Unique? Extremely high durability and resulting smooth running are key factors of the Lake Country pads. Especially with medium cut and finishing, it’s the outstanding working feeling provided by the Lake Country foam that leads to consistently perfect results!

The high-quality foam combined with a dual-layer system makes Lake Country’s HDO pads exceptional. By utilizing two different types of foam, the benefits of thin and thick pads are combined. The light gray layer reduces lateral and horizontal movement, decreasing friction heat, which is particularly problematic with powerful dual-action polishers. The polishing foam, available in various hardness levels and abrasiveness, is inherently heat-resistant and resistant to material fatigue. The two-layer concept ensures more consistent polishing results compared to cheaper SDO pads that lack the cooling and distortion-free layer. Top-Level Pressure Distribution and Design: Lake Country HDO Pads From 130mm in size, Lake Country HDO pads feature a heat-dissipating center chamber with a cooling hole for precise positioning. Although the HDO pads are 30-40% more expensive than the newer Lake Country SDO pads, the price difference is justified when used with forced dual-action polishers like the Flex XCE 10-8 or the Rupes LK900e Mille. Additionally, Lake Country foams are resistant and easier to clean when using high-performance polishes like Rupes D-A Coarse Compound, Sonax Ultimate Cut 6-3, and Sonax CutMax sanding paste. Engineered for Consistent Polishing Performance and Durability: Lake Country HDO at Chemical-Shark.de The premium foam of the SDO and HDO polishing pads ensures consistent polishing performance and high durability. Even with large stroke lengths and high oscillation rates, such as with the Rupes LHR21e Mark III, the pads remain shape-stable and operate smoothly. Available in Three Different Foam Types Blue: Designed for maximum cut, removing scratches, swirls, and oxidation. Perfect for quick paint defect corrections. Orange: Medium cut, removing moderate paint defects while providing good finishing. Black: Finishing foam, very soft for high-gloss polishes and for applying and processing wax and sealants. Lake Country HDO Pads Available in All Sizes: Hook & Loop Backing, Polishing Surface: 80/90mm, 130/140mm, 150/165mm Pad Thickness: 22mm Foam Types: Cutting Blue, Medium Cut Orange, Finishing Black What Makes Lake Country Foam Pads Unique? Extremely high durability and, consequently, smooth operation are defining factors of Lake Country pads. Especially with medium-cut and finishing pads, it’s the exceptional work feel provided by the Lake Country foam that leads to consistently perfect results!

The Lake Country Microfiber Cutting Pads are crafted from a newly developed microfiber that allows for quick defect correction, scratch removal, and a great finish simultaneously. The microfiber is optimized for reduced flattening, making it significantly more stable than other microfiber pads. This feature of the Lake Country Microfiber Cutting Pads enhances heat dissipation while polishing. Consequently, the pads can be used longer and heat less. Optimized for eccentric and forced rotary polishers like Rupes BigFoot Mark LHR12/15/21, LK900e, and Flex XFE/XCE The pads are designed for use with high-performance large throw polishers, such as those from Rupes, Makita, and Flex. In conjunction with medium and heavy cut polishes from Rupes, Sonax, 3D, and Meguiars, these powerful pads optimize all benefits and enable efficient polishing. Between the hook-and-loop and the microfiber, the Cutting Pads are dampened with blue Lake Country foam, ensuring optimal smoothness and contact even at high speeds. Lake Country Microfiber Cutting Pads are available in all sizes: 32/42mm for example, for Flex PXE and Rupes iBrid 52/62mm for example, for Flex PXE and Rupes iBrid (50mm backing plate from Detail Passion) 80/90mm for example, for Flex XFE 7-12 and Rupes LHR75 130/150mm for example, for Flex XFE 7-15 and Rupes LHR12/15/21 150/165mm for example, for 150mm hook-and-loop backing plate LHR21, Flex XFE

The Lake Country Microfiber Cutting Pads are made from a completely new type of microfiber that provides high defect correction and scratch removal in a very short working time while achieving a good finish. The microfiber is optimized for reduced flattening, making it significantly more stable in shape compared to other microfiber pads. This characteristic of the Lake Country Microfiber Cutting Pads ensures improved heat dissipation during polishing, allowing the pads to be used longer and generate less heat. Optimized for rotary and dual-action polishers like Rupes BigFoot Mark LHR12/15/21, LK900e, and Flex XFE/XCE The pads are designed for use with high-performance large stroke dual-action polishers from brands like Rupes, Makita, and Flex. In combination with medium cut and heavy cut polishes from Rupes, Sonax, 3D, and Meguiars, these powerful pads unleash all their advantages and enable efficient polishing work. Between the Velcro and microfiber, the cutting pads are dampened with blue Lake Country foam, which ensures optimal smoothness and support even at high speeds. We keep the Lake Country Microfiber Cutting Pads in all available sizes in stock: 32/42mm for example for Flex PXE and Rupes iBrid 52/62mm for example for Flex PXE and Rupes iBrid (50mm backing plate from Detail Passion) 80/90mm for example for Flex XFE 7-12 and Rupes LHR75 130/150mm for example for Flex XFE 7-15 and Rupes LHR12/15/21 150/165mm for example for 150mm Velcro backing plate LHR21, Flex XFE

The Lake Country Microfiber Cutting Pads are made from a completely new microfiber that allows for high defect correction (scratch removal) and a good finish in the shortest working time. The microfiber is optimized for reduced flattening, making it significantly more shape-stable than other microfiber pads. This feature of the Lake Country Microfiber Cutting Pads ensures improved heat dissipation while polishing. As a result, the pads can be used longer and heat up less. Optimized for orbital and forced orbital polishers like Rupes BigFoot Mark LHR12/15/21, LK900e and Flex XFE/XCE These polishing pads are designed for use with high-performance large stroke orbital polishers from brands like Rupes, Makita, and Flex. In combination with medium and heavy cut polishes from Rupes, Sonax, 3D, and Meguiars, these powerful pads maximize performance and enable efficient polishing work. Between the hook-and-loop backing and the microfiber, the Cutting Pads are cushioned with blue Lake Country foam, which ensures optimal balance and support even at high speeds. The Lake Country Microfiber Cutting Pads are available in all sizes: 32/42mm for instance for Flex PXE and Rupes iBrid 52/62mm for instance for Flex PXE and Rupes iBrid (50mm backing plate from Detail Passion) 80/90mm for instance for Flex XFE 7-12 and Rupes LHR75 130/150mm for instance for Flex XFE 7-15 and Rupes LHR12/15/21 150/165mm for instance for 150mm hook-and-loop backing plate LHR21, Flex XFE

The Lake Country Microfiber Cutting Pads feature a newly developed microfiber that achieves high defect correction - scratch removal - and a good finish in a short time. The microfiber is optimized for reduced flattening and is therefore much more stable than other microfiber pads. This property ensures improved heat dissipation during polishing, allowing the pads to be used longer and heat up less. Optimized for rotary and dual-action polishers like Rupes BigFoot Mark LHR12/15/21, LK900e, and Flex XFE/XCE These pads are designed for use with high-performance large throw dual-action polishers from brands like Rupes, Makita, and Flex. When paired with medium cut and heavy cut polishes from Rupes, Sonax, 3D, and Meguiars, these powerful polishing pads deliver efficient polishing work. The cutting pads are dampened with blue Lake Country foam between the hook-and-loop and microfiber, ensuring optimal smooth operation and contact even at high speeds. Available in all sizes: 32/42mm for Flex PXE and Rupes iBrid 52/62mm for Flex PXE and Rupes iBrid (50mm backing plate from Detail Passion) 80/90mm for Flex XFE 7-12 and Rupes LHR75 130/150mm for Flex XFE 7-15 and Rupes LHR12/15/21 150/165mm for 150mm hook-and-loop backing plate LHR21, Flex XFE

With Lake Country Snappy Clean Boost, polishing pads can be easily and thoroughly cleaned. This powder from the US manufacturer features a patented formula that dissolves polish residues and dirt. At the same time, Lake Country Snappy Clean Boost reactivates the cell or fiber structure of the pads. Although this cleaner is specifically designed for Lake Country pads, it also works excellently with Flex, Sonax, Koch Chemie, Meguiars, and other polishing pads. Deep Cleaning for Polishing Pads for Longevity of Microfiber, Foam, and Wool Pads Citrus-based cleaning powder for polishing pads Patented formula for cleaning and reactivating the cell or fiber structure of polishing pads Designed for Lake Country polishing pads, also ideal for all other polishing discs Deep cleaning of polishing pads ensures long life 100% biodegradable

Lake Country Padwasher System 4000™: Pre-Information on Availability The System 4000™ from Lake Country is a revolutionary polishing pad cleaning system. Unlike other systems, the cleaning of polishing pads can be carried out directly with the polisher in hand. This prevents polishing residue from drying and optimizes workflow. The patented Pure Flo technology is a closed-loop cleaning system. The user controls how much cleaning liquid flows into the system by pressing the pump. With the System 4000™ pad cleaner, polishing pads are cleaned faster, more thoroughly, and more gently than ever imagined. Two water chambers for flushing foam, microfiber, hybrid fiber, and wool pads The cleaning system consists of two separate chambers for clean and used water. Fresh cleaning water is drawn from the lower section, optionally mixed with "Snappy Clean Booster" or other pad cleaning agents. The upper chamber holds the already used dirty water. The user-controlled water flow makes the system efficient, economical, and environmentally friendly. For less dirty pads, the cleaning water in the upper chamber can be reused multiple times. Depending on the type of pad or level of contamination, the user decides how often to reuse the water. Easy cleaning of polishing pads with rotary, forced rotation, or dual-action polishers To start, simply remove the wastewater collection tray from the cleaning system, fill the cleaning tray with water and cleaning agent, and reinsert the collection tray. At low speed, the dirty pad can now be cleaned directly with the polisher. The water amount is controlled by pressing on the washing chamber. Once the pad is sufficiently cleaned, the polisher is lifted, and the water is spun out of the pad or sponge by increasing the speed. The holder of the collection tray is designed to ensure that the spun-out water lands back in the collection tray. Lake Country Padwasher System 4000: Order directly at Chemical-Shark.de! Fast, efficient, and economical cleaning of polishing pads directly with the polisher in hand Compatible with rotary, dual-action, and forced rotation polishers Cleans all pad sizes made of foam, microfiber, hybrid fibers, and wool Environmentally friendly with flexible reuse of cleaning water as needed Patented and developed by Lake Country: a leading manufacturer of polishing pads and sponges Official distribution through Chemical-Shark.de Two modes: Standard and closed-loop cleaning cycle The system supports two modes. To reuse the cleaning solution, the appropriate screws on the collection tray can be removed. If the cleaning cycle is not intended for reuse, the screws remain closed or inserted. These modes are also explained in the video. Lake Country Pad Washer 4000 vs. Lake Country Pad Washer 3000 The Pad Washer 4000 is a direct advancement of its predecessor, the 3000. Unlike the 3000, it no longer requires filter inserts, and the splash guard has been replaced. Residue separation is now managed differently, and the splash guard is rendered unnecessary by a taller edge and the yellow edge cover. These changes, along with an improved pump, make the system more robust and easier to use. Chemical-Shark.de Recommendations In our opinion, the Pad Washer System 4000™ is most effective when pads are cleaned immediately after use. For professional use, we recommend always keeping the cleaning system ready. While all-purpose cleaners (APCs) can be used, cleaning is more reliable with specialized cleaners from Lake Country or Wolfgang. You can find suitable cleaning agents listed under "Accessories" at the bottom of this page. The operation is explained in the application video, also available at the bottom of this page.

With the Standard Duty Orbital Pads - short "SDO" - Lake Country Manufacturing is responding to a request and recommendation from many detailers. The idea was to use the high-quality foam of the HDO foam pads without the known sublayer. This manufacturing method makes the popular foam attractive for cost-conscious buyers. It should also be noted that the heat generation with modern Flex and Rupes orbital polishing machines remains at a low level, thanks to the new drive and design generations. Optimized for constant polishing performance and high durability: Lake Country SDO at Chemical-Shark.de The high-quality foam of the SDO and HDO polishing pads ensures constant polishing performance and high durability. Even at high stroke and oscillation frequency, like with the Rupes LHR21e Mark III, the pads remain stable in shape and smooth running. The SDO pads are available in 3 different foam types Blue: Designed for maximum cut, scratch, swirl, and oxidation removal. Perfect for quick paint defect corrections. Orange: Medium cut, removal of medium paint defects with good finishing. Black: Black Finishing, very soft foam for high-gloss polishes and for applying and processing waxes and sealants. The Lake Country SDO pads are available in all sizes: Velcro backing, polishing surface: 80/90mm, 130/140mm, 150/165mm Thickness of the pad: 22mm Foam: Cutting blue, medium cut orange, finishing black What makes Lake Country foam pads so unique? Extremely high durability and the resulting high smoothness are among the factors that describe the Lake Country pads. Particularly with medium cut and finishing, it's the exceptional working feel that Lake Country foam provides, leading to consistently perfect results!

With the Collapsed Cell Structure Pads - short CCS Pads - Lake Country has revolutionized the art of uncompromising paint corrections. CCS Pads are flat foam polishing pads designed for dual-action and forced rotation polishers with a patented surface design. It's important to note that CCS Pads are fundamentally suitable for rotary polishers, especially when their cutback shape allows for a larger polishing surface on a smaller backing plate. All CCS Pads available from the official distributor Chemical-Shark.de are produced in cutback shape. Patented CCS Cell Structure Offers Numerous Advantages The surface of CCS Pads is equipped with small pockets that feature a closed cell structure inside through a special process, while the foam of the polishing pad remains open-pored. This property enables significantly more efficient use of polish with CCS Pads. The polish penetrates the pocket but not the polishing pad, allowing it to be worked for much longer. At the same time, the cell structure is better cooled, and the pad cannot dry out due to drying polish. Suitable for All Paint Types: Lake Country CCS Polishing Pads from Chemical-Shark.de Known among experts as "Smart Pads", these polishing pads are suitable for all types of paints. This includes scratch-resistant clear coats from Mercedes Benz, BMW, and Porsche, as well as more sensitive vintage paints without clear coating. Lake Country CCS Polishing Pads in Various Hardness Levels and Sizes Yellow: Designed for maximum cut, scratch, swirl, and oxidation removal. Perfect for quick paint defect corrections Orange: Medium cut, removal of medium paint defects with good finishing White: Fine, removal of final paint defects for high-gloss finish Black: Black Finishing, very soft foam for high-gloss polishes and for applying and processing waxes and sealants Lake Country CCS Pads Available in All Sizes: Hook and loop backing, polishing surface: 75/90mm, 90/101mm, 125/140mm, 150/165mm Perfect for polishing machines from manufacturers such as Flex, Rupes, Makita, Festool Pad thickness: 22mm or 32mm What Makes Lake Country Foam Pads Unique? Extremely high durability and resulting smooth operation are some of the describable factors of Lake Country Pads. Especially in medium-cut and finishing, it is the particularly good working feel that Lake Country foam delivers, leading to consistently perfect results!

With the Collapsed Cell Structure Pads - short CCS Pads - Lake Country has revolutionized the art of uncompromising paint correction. CCS Pads are flat foam polishing pads designed for dual-action polishers and forced rotation polishers with a patented surface design. It is worth mentioning that CCS Pads are also fundamentally suitable for rotary polishers, particularly when the cutback shape creates a larger polishing area on a smaller backing plate. All CCS Pads available from the official distributor Chemical-Shark.de are produced in cutback form. Patented CCS Cell Structure Offers Numerous Advantages The surface of CCS Pads features small pockets, the interior of which has a closed cell structure via a special process, even though the foam of the polishing pad is otherwise open-pored. This characteristic allows for a much more economical use of polish with CCS Pads. The polish penetrates into the pocket but not into the polishing pad, thereby enabling a significantly longer working time. At the same time, the cell structure remains cooler, and the pad cannot dry out from the drying polish. Suitable for All Paint Types: Lake Country CCS Polishing Pads from Chemical-Shark.de Referred to as "Smart Pads" among connoisseurs, these polishing pads are suitable for all types of paint. This includes both scratch-resistant clear coats from Mercedes Benz, BMW, and Porsche, as well as more sensitive vintage paints without a clear coat. Lake Country CCS Polishing Pads in Various Hardness Grades and Sizes Yellow: Designed for maximum cut, scratch, swirl, and oxidation removal. Perfect for quick paint defect corrections Orange: Medium cut, removes moderate paint defects with good finishing White: Fine, removes last paint defects for high-gloss finish Black: Black finishing, very soft foam for high-gloss polishing and for applying and processing waxes and sealants Lake Country CCS Pads Available in All Sizes: Hook-and-loop back, polishing surface: 75/90mm, 90/101mm, 125/140mm, 150/165mm Perfectly suitable for polishing machines from manufacturers like Flex, Rupes, Makita, Festool Thickness of the pad: 22mm or 32mm What Makes Lake Country Foam Pads Unique? Extremely high durability and resulting smooth operation are describable factors of Lake Country Pads. Especially in medium-cut and finishing, it is the particularly good working sensation that Lake Country foam provides, leading to consistently perfect results!

The new HDO CCS Pads from market leader Lake Country combine two of their best technologies for high-quality polishing work. For several years, HDO Pads have been known as the unmatched benchmark in the industry, thanks to the combination of highly durable foams, heat dissipation, and pressure stability. HDO stands for "Heavy Duty Orbital", indicating that this technology was primarily developed for modern dual-action and forced rotation polishers. Another key technology provided by Lake Country is CCS, which stands for Collapsed Cell Structure. The surface of CCS is designed with small pockets that, through a special process, exhibit a closed cell structure internally, even though the foam of the polishing pad is otherwise open-pored. This feature allows for a significantly more efficient use of polish with CCS Pads. The polish penetrates into the pocket but not into the polishing pad itself, allowing for a much longer working time. At the same time, the cell structure is better cooled, and the pad cannot dry out due to the drying polish. With the new HDO CCS Pads, both technologies are available in one pad series. The US manufacturer surprises the market, as the production keeps the pads at the same price level as "ordinary" HDO Pads. Pressure Distribution and Form Design at the Highest Level: Lake Country HDO CCS Pads From 130mm, the Lake Country HDO CCS Pads are equipped with a heat-dissipating center chamber and a milling hole for further cooling and precise positioning. While the Lake Country HDO CCS Pads are 30-40% more expensive than the newer Lake Country SDO Pads, the price difference is justified, especially when used with forced rotation models like the Flex XCE 10-8 or the Rupes LK900e mille. Lake Country foams are also resistant and easier to clean when using newer high-performance polishes like 3D ACA-XTRA 510 or 3D One Hybrid. Optimized for Consistent Polishing Performance and High Durability: Lake Country HDO CCS at Chemical-Shark.de The high-quality foam of the SDO and HDO polishing pads ensures consistent polishing performance and high durability. Even with significant stroke and high oscillation frequency, such as with the Rupes LHR21e Mark III, the pads remain stable in shape and vibration-free. The HDO CCS Pads Are Available in 3 Different Foam Types Blue: Designed for maximum cut, scratch, swirl, and oxidation removal. Perfect for quick paint defect corrections. Orange: Medium cut, removal of medium paint defects with good finishing. Black: Black finishing, very soft foam for high-gloss polishes and for applying and processing waxes and sealants. Lake Country HDO CCS Pads Are Available in All Sizes in Stock: Hook and loop backing, polishing surface: 80/90mm, 130/140mm, 150/165mm. Pad thickness: 25mm. Foam types: Cutting blue, Medium Cut orange, Finishing black. What Makes Lake Country Foam Pads Unique? Extremely high durability and resulting smooth operation are some of the defining factors of Lake Country Pads. Especially with medium cut and finishing, it is the excellent working feel provided by Lake Country foam that leads to consistently perfect results!

The new HDO CCS pads from market leader Lake Country combine two of their best technologies for premium polishing work. HDO pads are renowned for their combination of durable foam materials, heat dissipation, and pressure consistency, making them an unmatched benchmark in the industry. HDO stands for "Heavy Duty Orbital," indicating that this technology is primarily designed for modern dual-action and forced rotation polishers. A key technology from Lake Country is CCS, which stands for Collapsed Cell Structure. The surface of CCS features small pockets, whose interior consists of a closed cell structure due to a special manufacturing process, while the foam of the polishing pad remains open-pored. This allows for significantly more economical use of polish. The polish penetrates into the pocket without soaking into the pad, allowing for much longer working times. Additionally, the cell structure is better cooled, preventing the pad from drying out due to evaporating polish. With the new HDO CCS pads, both technologies are available in one pad series. The US manufacturer surprises the market by offering these pads at a price level comparable to "regular" HDO pads. Pressure Distribution and Shape Design at the Highest Level: Lake Country HDO CCS Pads From 130mm, the Lake Country HDO CCS pads come with a heat-dissipating center chamber and a groove for additional cooling and precise positioning. While the Lake Country HDO CCS pads are 30-40% more expensive than the newer Lake Country SDO pads, the price difference is justified especially when used with forced rotation polishers such as the Flex XCE 10-8 or the Rupes LK900e mille. Lake Country foams are also resistant and easier to clean when using newer high-performance polishes like 3D ACA-XTRA 510 or 3D One Hybrid. Optimized for Constant Polishing Performance and High Durability: Lake Country HDO CCS at Chemical-Shark.de The high-quality foam of the SDO and HDO polishing pads ensures consistent polishing performance and high durability. Even with a large stroke and high oscillation frequency, such as with the Rupes LHR21e Mark III, the pads remain stable in shape and run smoothly. The HDO CCS Pads are Available in 3 Different Foams Blue: Designed for maximum cut, scratch, swirl, and oxidation removal. Perfect for quick paint defect corrections. Orange: Medium cut, removes moderate paint defects while providing good finishing. Black: Black finishing, very soft foam for high-gloss polishes and for applying and processing waxes and sealants. The Lake Country HDO CCS Pads are in stock in all available sizes: Hook-and-loop backing, polishing surface: 80/90mm, 130/140mm, 150/165mm Pad thickness: 25mm Foam: Cutting blue, medium cut orange, finishing black What Makes Lake Country Foam Pads So Unique? Extremely high durability and the resulting high running smoothness are notable features of Lake Country pads. Particularly in medium-cut and finishing, it’s the excellent working feel provided by Lake Country foam that leads to consistently perfect results!

The Standard Duty Orbital Pads, or "SDO", from Lake Country Manufacturing meet the requests and recommendations of many detailers. The idea was to utilize the high-quality foam from HDO pads without the well-known backing layer. This manufacturing method makes the popular foam more attractive to cost-conscious buyers. It should also be noted that the heat generation of modern Flex and Rupes orbital polishers remains low thanks to new drive and design generations. Another key technology provided by Lake Country is CCS, which stands for Collapsed Cell Structure. The surface of CCS is equipped with small pockets that feature a closed cell structure inside, despite the foam being open-pored. This characteristic allows for more efficient polish usage with CCS pads. The polish penetrates into the pocket but not into the pad itself, allowing for substantially longer working times. At the same time, the cell structure is better cooled, preventing the pad from drying out due to the polish. With the new SDO CCS pads, both technologies are available in one pad series. The US manufacturer surprises the market by keeping the production costs at the same level as "ordinary" SDO pads. Optimized for consistent polishing performance and high durability: Lake Country SDO CCS at Chemical-Shark.de The high-quality foam of the SDO and HDO polishing pads ensures consistent polishing performance and high durability. Even with large throw and high oscillation rates, such as with the Rupes LHR21e Mark III, the pads remain stable and operate smoothly. The SDO CCS Pad Orange Medium is designed for removing medium paint defects while providing good finishing What makes Lake Country foam pads so unique? Extremely high durability and thus high operational smoothness are notable factors of Lake Country pads. Especially in medium cut and finishing, it is the excellent working feel that Lake Country foam offers, leading to consistently perfect results!

Lake Country has revolutionized the way of uncompromising paint correction with its Collapsed Cell Structure Pads - known as CCS Pads. These flat foam polishing pads are designed for both dual-action polishers and forced rotation polishers, featuring a patented surface design. Importantly, CCS Pads are also suitable for rotary polishers, especially when their cutback shape creates a larger polishing surface on a smaller backing plate. All CCS Pads available from the official distributor Chemical-Shark.de are produced in cutback shape. Patented CCS Cell Structure Offers Numerous Advantages The surface of CCS Pads is equipped with small pockets, the interiors of which have a closed cell structure due to a special process, while the foam of the polishing pad remains open-pore. This allows for a more economical use of polish with CCS Pads. The polish penetrates into the pocket but does not soak into the polishing pad, allowing for significantly longer processing times. At the same time, the cell structure stays cooler, and the pad does not dry out due to drying polish. Suitable for All Paint Types: Lake Country CCS Polishing Pads from Chemical-Shark.de Known among experts as "Smart Pads", these polishing pads are suitable for all paint types. This includes scratch-resistant clear coats from Mercedes Benz, BMW, and Porsche, as well as more sensitive vintage car paints without a clear coat layer. Lake Country CCS Polishing Pads in Various Hardness Levels and Sizes Yellow: Designed for maximum cut, removing scratches, swirls, and oxidation. Perfect for quick paint defect corrections. Orange: Medium cut, removing medium paint defects with good finishing. White: Fine, removing last paint defects for high-gloss finish. Black: Black finishing, very soft foam for high-gloss polishes and for applying and processing wax and sealants. Lake Country CCS Pads Available in All Sizes: Velcro backing, polishing surface: 75/90mm, 90/101mm, 125/140mm, 150/165mm. Perfectly suitable for polishers from manufacturers such as Flex, Rupes, Makita, Festool. Pad thickness: 22mm or 32mm. What Makes Lake Country Foam Pads So Unique? Extremely high durability and resulting smooth operation are significant attributes of Lake Country Pads. Especially with medium-cut and finishing, it is the uniquely good working feel provided by the Lake Country foam that leads to consistently perfect results!

The new HDO CCS pads from market leader Lake Country combine two of the best technologies for high-quality polishing work. HDO pads have been regarded as the unrivaled benchmark in the industry for years due to their combination of durable foam materials, heat dissipation, and pressure stability. HDO stands for "Heavy Duty Orbital," indicating that this technology was primarily developed for modern dual-action and forced rotation polishing machines. Another key technology is provided by Lake Country with CCS, meaning Collapsed Cell Structure. The surface of CCS is equipped with small pockets that feature a closed cell structure in their interior through a special process, even though the foam of the polishing pad is open-pored. This property allows for significantly more polish efficiency when using CCS pads. The polish penetrates into the pocket but not into the polishing pad, enabling it to be processed for a much longer period. At the same time, the cell structure is better cooled, and the pad does not dry out due to drying polish. With the new HDO CCS pads, both technologies are available in a single pad series. The US manufacturer surprises the market as the manufacturing cost is comparable to that of "regular" HDO pads. Pressure Distribution and Shape Design at the Highest Level: Lake Country HDO CCS Pads From 130mm, the Lake Country HDO CCS pads feature a heat-dissipating center chamber with a milling hole for further cooling and precise positioning. Although the Lake Country HDO CCS pads are 30-40% more expensive than the newer Lake Country SDO pads, the price difference is justified, especially when used with forced rotation machines like the Flex XCE 10-8 or the Rupes LK900e mille. Lake Country foams are also less sensitive and easier to clean when using newer high-performance polishes such as 3D ACA-XTRA 510 or 3D One Hybrid. Optimized for Consistent Polishing Performance and High Durability: Lake Country HDO CCS at Chemical-Shark.de The high-quality foam of the SDO and HDO polishing pads ensures consistent polishing performance and high durability. Even with a large stroke and high oscillation speed, such as with the Rupes LHR21e Mark III, the pads remain shape-stable and run smoothly. The HDO CCS Pads Are Available in 3 Different Foams Blue: Designed for maximum cut, removal of scratches, swirls, and oxidation. Perfect for quick paint defect corrections. Orange: Medium cut, removal of medium paint defects with good finishing. Black: Black Finishing, very soft foam for high-gloss polishes and for applying and processing wax and sealants. The Lake Country HDO CCS Pads Are Available in All Sizes: Velcro backing, polishing surface: 80/90mm, 130/140mm, 150/165mm. Pad thickness: 25mm. Foam: Cutting blue, Medium Cut orange, Finishing black. What Makes Lake Country Foam Pads So Unique? Extremely high durability and resulting high running smoothness are some of the describable factors of Lake Country pads. Especially in medium cut and finishing, it is the exceptionally good working feel that the Lake Country foam provides, leading to consistently perfect results!

With the new HDO CCS pads, the market leader Lake Country combines two of its best technologies for the highest quality polishing work. HDO pads have been an unmatched and unrivaled benchmark in the industry for years due to the combination of the most durable foams, heat dissipation, and pressure consistency. HDO stands for "Heavy Duty Orbital", indicating that this technology is primarily designed for modern dual-action and forced rotation polishers. Another key technology provided by Lake Country is CCS, which stands for Collapsed Cell Structure. The surface of the CCS is equipped with small pockets whose interior has a closed cell structure through a special process, even though the foam of the polishing pad is otherwise open-pored. This feature allows for considerably more economical use of polish with CCS pads. The polish penetrates the pocket but does not enter the polishing pad itself, allowing it to be processed for a much longer time. At the same time, the cell structure is better cooled, preventing the pad from drying out due to drying polish. The new HDO CCS pads offer both technologies in one pad series. The US manufacturer surprises the market by producing these pads at the same price level as "regular" HDO pads. Pressure Distribution and Design at the Highest Level: Lake Country HDO CCS Pads From 130mm, the Lake Country HDO CCS pads come with a heat-dissipating center chamber and a milling hole for additional cooling and precise positioning. Although Lake Country HDO CCS pads are 30-40% more expensive than the newer Lake Country SDO pads, the price difference is justified when used with forced rotation polishers such as the Flex XCE 10-8 or the Rupes LK900e mille. Lake Country foams are also resilient and easier to clean when using newer high-performance polishes like the 3D ACA-XTRA 510 or 3D One Hybrid. Optimized for Consistent Polishing Performance and High Durability: Lake Country HDO CCS at Chemical-Shark.de The high-quality foam of SDO and HDO polishing pads ensures consistent polishing performance and high durability. Even at a large stroke and high oscillation frequency, such as with the Rupes LHR21e Mark III, the pads remain stable and run smoothly. The HDO CCS Pads are Available in 3 Different Foam Types Blue: Designed for maximum cut, scratch, swirl, and oxidation removal. Perfect for quick paint defect corrections Orange: Medium cut, removal of moderate paint defects with good finishing Black: Black finishing, very soft foam for high-gloss polishes and for applying and processing waxes and sealants The Lake Country HDO CCS Pads are Available in All Sizes in Our Stock: Hook and loop backing, polishing surface: 80/90mm, 130/140mm, 150/165mm Pad thickness: 25mm Foam: Cutting blue, Medium Cut orange, Finishing black What Makes Lake Country Foam Pads So Unique? Extremely high durability and the resulting high smoothness are among the describable factors of Lake Country pads. Especially in medium-cut and finishing, it is the particularly good working feel that the Lake Country foam provides, leading to consistently perfect results!

With the Standard Duty Orbital Pads - abbreviated "SDO" - Lake Country Manufacturing responds to a request and recommendation from many detailers. The idea was to use the high-quality foam of the HDO foam pads without the known underlayer. This manufacturing method makes the popular foam attractive for cost-conscious buyers. It should also be mentioned that heat generation with modern Flex and Rupes orbital polishers is kept at a low level due to the new drive and design generations. Optimized for Consistent Polishing Performance and High Durability: Lake Country SDO at Chemical-Shark.de The high-quality foam of the SDO and HDO polishing pads ensures consistent polishing performance and high durability. Even under heavy stroke and high oscillation frequency, such as with the Rupes LHR21e Mark III, the pads remain stable and run smoothly. The SDO Pads are Available in 3 Different Foam Types Blue: Designed for maximum cut, removing scratches, swirls, and oxidation. Perfect for quick paint defect corrections Orange: Medium cut, removes medium paint defects with good finishing Black: Black Finishing, very soft foam for high-gloss polishing and for applying and processing waxes and sealants The Lake Country SDO Pads are Available in All Sizes Hook-and-loop backing, polishing surface: 80/90mm, 130/140mm, 150/165mm Pad thickness: 22mm Foam types: Cutting blue, Medium Cut orange, Finishing black What Makes Lake Country Foam Pads Unique? Extremely high durability and resulting smooth operation are key factors of the Lake Country pads. Especially in medium cut and finishing, it is the particularly good working feel that the Lake Country foam provides, leading to consistently perfect results!

The Lake Country Snappy Clean Boost allows for easy and thorough cleaning of polishing pads. This powder from the US manufacturer features a patented formula that works by dissolving polishing residues and dirt. Simultaneously, Lake Country Snappy Clean Boost reactivates the cell or fiber structure of the pads. Although this cleaning powder is specifically designed for Lake Country pads, it also works excellently with Flex, Sonax, Koch Chemie, Meguiars, and other polishing pads. Deep Cleaning for Polishing Pads for Longevity of Microfiber, Foam, and Wool Pads Citrus-based cleaning powder for polishing pads Patented formula for cleaning and reactivating the cell or fiber structure of polishing pads Developed for Lake Country polishing pads, also perfect for all other polishing discs Deep cleaning of polishing pads ensures longevity 100% biodegradable