MTM Hydro – Professional Grade High Pressure Accessories from Italy

1/2 inch male thread adapter for connecting the MTM Hydro GHF1 low-pressure foam sprayer to Gardena garden hose. 1/2 inch male thread to Gardena adapter Impact-resistant plastic Perfect for GHF1 low-pressure foam cannon

Hersteller: MTM HYDRO S.r.l., Via Moglia 33 , 12062 Cherasco CN IT, info@mtmhydro.it

DP Pro quick connect components are designed for the safe operation of pressure washers and are manufactured with the utmost care. They can be used with MTM Hydro spray guns, cleaning wands, and foam lances, but are also suitable for adapting products from other manufacturers such as Kärcher, Nilfisk, and Kränzle. MTM Hydro 1/4in Round Coupling Adapter for 1/4in Pressure Washer 1/4 inch thread on both sides For connection via threading Suitable up to 200 bar

MTM Hydro ILS28 SQR is the universal high pressure lance for cleaning vehicles. The lance features a 29cm insulated handle and an angled end. It comes fully assembled with a 1/4 QuickConnect connector and a 1/4 QuickConnect coupling. The quick coupling accepts spray nozzles. MTM Hydro ILS28 SQR High Pressure Lance QuickConnect 50cm Complete 1/4 QuickConnect high pressure lance 29cm insulated grip area, total length 50cm Angled end Approved for cold and hot water use Operating pressure up to 280 bar

MTM Hydro Nozzle Holder NP35 - designed for QuickConnect couplings and nozzles. The rubber coating ensures optimal impact protection. MTM Hydro Nozzle Holder NP35 G1/4F to G1/4F Threaded Nozzles Nozzle Holder for threaded nozzles Perfect for MTM Hydro lance High-quality rubber coating

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, made in Italy. The lance can be used with up to 200 bar and a water flow of 11.5 l/min. With a tank volume of 1000 ml, the MTM PF22.2 has a larger capacity than most foam cannons from other manufacturers. Foam generation and dispensing occur through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.2 offers a variety of adjustment options, allowing you to set the spray angle from round to flat, the direction of the flat spray horizontally or vertically, and the concentration of the water/chemical mixture. The MTM Hydro PF22.2 is a tilt-proof design and an advancement over the PF22. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive product research and intensive testing, we proudly present the MTM Hydro PF22.2, the first product from this Italian manufacturer of pressure washer technology in our range. The MTM Hydro PF22.2 meets all practical requirements we consider essential. With suitable adapters, which we will continue to expand, the MTM Hydro can be adapted to most hobby and professional segment pressure washers. The MTM Hydro PF22.2 delivers excellent foam formation even with thinner APC cleaners and can thus be used universally. Even with a low concentration, the PF22.2 foam lance perfectly foams the mixture, allowing for economical and environmentally friendly vehicle cleaning. The MTM Hydro PF22.2 has proven itself in our tests due to the quality and craftsmanship of the materials, which are of the highest standard and thus superior to Asian imitations. And if anything breaks or wears out, we supply the appropriate spare parts. Various Versions of the PF22.2 Foam Lance from MTM Hydro The MTM Hydro comes pre-assembled with various adapters and is ready for use or can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we are happy to assist. High-quality foam lance made in Italy Patented technology for foam generation Tilt-proof with filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for high-pressure cleaners, manufactured in Italy. The lance can be used at up to 200 bar with a water flow rate of 11.5 l/min. With a tank volume of 1,000 ml, the MTM PF22.2 can hold more than most foam cannons from other manufacturers. Foam generation and delivery occur through flow and suction via the foam head made from brass and stainless steel. The MTM Hydro PF22.2 offers a range of adjustment options, allowing you to set the spray from round to flat, adjust the direction of the flat spray horizontally or vertically, and control the concentration of the water/chemical mixture. The MTM Hydro PF22.2 is designed to be tip-resistant as an evolution of the PF22. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive product research and rigorous testing, we are pleased to welcome the MTM Hydro PF22.2 as the first product from the Italian manufacturer of high-pressure cleaning technology to our range. The MTM Hydro PF22.2 meets all practical requirements that we consider essential. With compatible adapters, which we will extend, the MTM Hydro can be adapted to most high-pressure cleaners in both hobby and professional segments. The MTM Hydro PF22.2 produces excellent foam even with thin liquid APC cleaners, making it universally applicable. Even at lower concentrations, the PF22.2 foam lance foams the mixture perfectly, allowing for economical and eco-friendly vehicle cleaning. The MTM Hydro PF22.2 has also proven itself in our tests due to the high quality and craftsmanship of the materials, superior to Asian imitations. And should something break or wear out, we carry the appropriate spare parts. Various Versions of the PF22.2 Foam Lance from MTM Hydro The MTM Hydro is available pre-assembled with various adapters and ready for use, or it can be adapted via 1/4 screw thread. If you have questions about the right adapter, we are happy to assist. High-quality foam lance from Italian production Patented foam generation technology Tip-resistant with filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, made in Italy. The lance can withstand up to 200 bar of pressure and a water flow rate of 11.5 l/min. With a tank capacity of 1,000 ml, the MTM PF22.2 holds more than most foam cannons by other manufacturers. Foam generation and delivery operate via flow and suction through the brass and stainless steel foam head. The MTM Hydro PF22.2 offers a variety of adjustment options, allowing the spray pattern to be adjusted from round to flat, the direction of the flat jet to be set horizontally or vertically, and the concentration of the water/chemical mix to be controlled. The MTM Hydro PF22.2 is a robust upgrade of the PF22 model. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive product research and intense testing, we proudly introduce the MTM Hydro PF22.2, the first product from this Italian manufacturer of pressure washer technology in our range. The MTM Hydro PF22.2 meets all practical demands we consider vital. With compatible adapters, which we will continue to expand, the MTM Hydro can be adapted to most pressure washers in both hobby and professional segments. The MTM Hydro PF22.2 delivers excellent foam even with low-viscosity APC cleaners, making it universally applicable. Even at lower concentrations, the PF22.2 foam lance perfectly generates foam, enabling a resource-efficient and eco-friendly vehicle cleaning experience. The MTM Hydro PF22.2 has proven its worth in our tests, thanks to the high quality and craftsmanship of the materials, surpassing Asian imitations. Additionally, should any part break or wear out, we offer the corresponding spare parts. Different Versions of the Foam Lance PF22.2 by MTM Hydro The MTM Hydro comes ready-to-use with various mounted adapters or can be adapted via a 1/4” screw thread. If you have questions about the correct adapter, we are happy to assist. High-quality foam lance from Italian production Patented foam generation technology Tilt-proof with a filling scale Various adapters for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers made in Italy. This lance can be used with pressure up to 200 bar and a flow rate of 11.5 l/min. With a tank capacity of 1,000 ml, it holds more than most foam cannons from other manufacturers. The foam generation and dispensing occur through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.2 offers a variety of settings, allowing adjustment of the spray style from round to flat, the direction of the flat spray horizontally or vertically, and the concentration of the water/chemical mixture. The PF22.2 has been designed to be tip-resistant as an advanced version of the PF22. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive product research and testing, we welcome the MTM Hydro PF22.2 as the first product from this Italian manufacturer of pressure washer technology into our range. The MTM Hydro PF22.2 meets all practical requirements we consider essential. With compatible adapters that we will continue to expand, the MTM Hydro can be adapted to most hobby and professional pressure washers. The MTM Hydro PF22.2 produces excellent foam even with low-viscosity APC cleaners and can thus be used universally. Even at low concentrations, the PF22.2 foam lance produces perfect foam, allowing for economical and eco-friendly vehicle cleaning. The MTM Hydro PF22.2 has proven successful in our tests due to the quality and finish of the materials being of the highest standard, thus superior to Asian imitations. And should something break or wear out, we have the appropriate replacement parts available. Different Versions of the PF22.2 Foam Lance by MTM Hydro The MTM Hydro comes pre-assembled and ready to use with various adapters or can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we are happy to assist. High-quality foam lance from Italian production Patented foam generation technology Tip-resistant with filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher

Die MTM Hydro PF22.2 ist eine professionelle Schaumkanone für Hochdruckreiniger aus italienischer Produktion. Die Lanze kann mit bis zu 200 bar und einem Wasserdurchfluss von 11,5 l/min verwendet werden. Mit einem Tankvolumen von 1.000 ml fast der Behälter der MTM PF22.2 mehr, als die meisten Schaumkanonen anderer Hersteller. Die Schaumerzeugung und der Abgabe erfolgt mittels Durchfluss und Ansaugung durch den aus Messing- und Edelstahl gefertigte Schaumkopf. Die MTM Hydro PF22.2 verfügt über eine Vielzahl von Einstellmöglichkeiten. So lassen sich der Sprühstahl von rund zu flach, die Richtung des Flachstrahls horizontal oder vertikal und die Konzentration des Wasser-/Chemiegemischs einstellen. Die MTM Hydro PF22.2 ist als Weiterentwicklung der PF22 kippsicher konstruiert. Perfekter Schaum für Autopflege & Detailing: MTM Hydro PF22.2 bei Chemical-Shark.de Nach umfangreicher Produkterecherche und intensiven Tests können wir mit der Aufnahme der MTM Hydro PF22.2 das erste Produkte des italienischen Herstellers für Hochdruckreiniger-Technik in unserem Sortiment begrüßen. Die MTM Hydro PF22.2 erfüllt alle praktischen Anforderungen, die wir als wesentlich erachten. Mit passenden Adaptern, die wir noch erweitern werden, kann die MTM Hydro an die meisten Hochdruckreiniger des Hobby- und Profisegments adaptiert werden. Die MTM Hybro PF22.2 liefert ein hervorragendes Schaumbild selbst bei dünnflüssigen APC-Reinigern und kann somit universell eingesetzt werden. Selbst bei geringer konzentration schäumt die PF22.2 Schaumlanze den Schaum perfekt auf und ermöglicht somit eine sparsame und umweltfreundliche Fahrzeugreinigung. Die MTM Hydro PF22.2 hat sich auch deshalb in unseren Tests bewährt, weil die Qualität und Verarbeitung der Materialien auf höchstem Niveau ist und somit asiatischen Plagiaten überlegen ist. Und sollte mal was kaputt gehen bzw. unter Verschleiß leiden, so führen wir die passenden Ersatzteile. Verschiedene Ausführung der Schaumlanze PF22.2 von MTM Hydro Die MTM Hydro ist mit verschiedenen Adaptern fertig montiert und einsatzbereit lieferbar oder kann selbst mittels 1/4 Schraubgewinde adaptiert werden. Bei Fragen zum richtigen Adapter sind wir gerne behilflich. Hochwertige Schaumlanze aus italienischer Produktion Patentierte Technologie zur Schaumerzeugung Kippsicher mit Skala zur Befüllung Verschiedene Adaptionen für Kränzle, Nilfisk und Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for high-pressure cleaners, made in Italy. The lance can be used with up to 200 bar and a flow rate of 11.5 l/min. With a tank volume of 1,000 ml, the MTM PF22.2 holds more than most foam cannons from other manufacturers. The foam generation and dispensing occur through flow and suction using a brass and stainless steel foam head. The MTM Hydro PF22.2 features a variety of adjustable settings. You can modify the spray pattern from round to flat, adjust the direction of the flat spray horizontally or vertically, and control the concentration of the water/chemical mixture. The MTM Hydro PF22.2 is designed to be tilt-proof as an evolution of the PF22. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive product research and intense testing, we proudly welcome the MTM Hydro PF22.2, the first product from this Italian manufacturer of high-pressure cleaner technology in our range. The MTM Hydro PF22.2 meets all practical requirements deemed essential. With compatible adapters, which we will continue to expand, the MTM Hydro can be adapted to most hobby and professional high-pressure cleaners. The MTM Hydro PF22.2 delivers excellent foam quality even with low-viscosity APC cleaners, making it versatile. Even at low concentration, the PF22.2 foam lance perfectly generates foam, allowing for economical and environmentally friendly vehicle cleaning. The MTM Hydro PF22.2 has proven itself in our tests due to the top-quality materials and craftsmanship, surpassing Asian knock-offs. And should something break or wear out, we offer the necessary replacement parts. Various Versions of the MTM Hydro PF22.2 Foam Lance The MTM Hydro is available pre-assembled with various adapters and ready for use, or can be adapted yourself using a 1/4 screw thread. If you have questions about the correct adapter, we are happy to assist you. High-quality foam lance from Italian production Patented technology for foam generation Tilt-proof with filling scale Various adapters for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, proudly made in Italy. This lance can operate at up to 200 bar with a flow rate of 11.5 l/min. With a tank capacity of 1,000 ml, the MTM PF22.2's container holds more than most foam cannons from other manufacturers. Foam generation and delivery is facilitated through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.2 offers a variety of adjustable settings, allowing users to customize the spray pattern from round to flat, adjust the direction of the flat spray horizontally or vertically, and control the concentration of the water/chemical mixture. The MTM Hydro PF22.2 is a tilt-proof advancement of the PF22 design. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive product research and rigorous testing, we welcome the MTM Hydro PF22.2, the first product from this Italian manufacturer of pressure washer technology to our range. The MTM Hydro PF22.2 meets all practical requirements that we deem essential. With compatible adapters, which we will continue to expand, the MTM Hydro can be adapted to most pressure washers in both hobby and professional segments. The MTM Hydro PF22.2 produces excellent foam even with low-viscosity APC cleaners, making it universally applicable. Even at low concentrations, the PF22.2 foam lance creates perfect foam, allowing for efficient and eco-friendly vehicle cleaning. The MTM Hydro PF22.2 has proven itself in our tests due to its superior quality and material processing, outclassing Asian imitations. Should anything break or wear out, we offer the suitable spare parts. Different Variants of the MTM Hydro PF22.2 Foam Lance The MTM Hydro comes ready to use with various pre-installed adapters or can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we're happy to assist. High-quality foam lance from Italian production Patented foam generation technology Tilt-proof with a filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, produced in Italy. The lance can be used with up to 200 bar and a water flow rate of 11.5 l/min. With a tank capacity of 1,000 ml, the MTM PF22.2 holds more than most foam cannons from other manufacturers. Foam generation and dispensing are achieved through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.2 offers multiple adjustment options. The spray pattern can be adjusted from round to flat, the direction of the flat spray can be set horizontally or vertically, and the concentration of the water/chemical mixture can be customized. The MTM Hydro PF22.2 is designed to be tip-proof as an advanced version of the PF22. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive product research and intensive testing, we are excited to welcome the MTM Hydro PF22.2, the first product from the Italian manufacturer of pressure washer technology, to our range. The MTM Hydro PF22.2 meets all the practical requirements we consider essential. With suitable adapters, which we will continue to expand, the MTM Hydro can be adapted to most pressure washers in both hobby and professional segments. The MTM Hydro PF22.2 delivers excellent foam quality even with thin APC cleaners, making it universally applicable. Even at low concentrations, the PF22.2 foam lance perfects the foam and thus enables economical and environmentally friendly vehicle cleaning. The MTM Hydro PF22.2 has also proven itself in our tests because the quality and craftsmanship of the materials are of the highest standard, making it superior to Asian imitations. And should something break or wear out, we have the suitable spare parts available. Different Versions of the PF22.2 Foam Lance from MTM Hydro The MTM Hydro comes fully assembled and ready for use with various adapters or can be adapted using a 1/4 inch thread. If you have questions about the correct adapter, we are happy to assist. High-quality foam lance made in Italy Patented technology for foam generation Tip-proof design with filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon made in Italy for pressure washers. It can be used with up to 200 bar and a water flow rate of 11.5 l/min. With a tank volume of 1,000 ml, it holds more than most foam cannons from other manufacturers. Foam generation and discharge occur through a brass and stainless steel foam head via flow and suction. The MTM Hydro PF22.3 offers numerous adjustable options. You can set the spray pattern from round to flat, adjust the direction of the flat spray either horizontally or vertically, and control the concentration of the water/chemical mixture. The MTM Hydro PF22.3 is a further development from the PF22.2 featuring a large filling opening. An upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro comes ready to use with various adapters or can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. Various Versions of the MTM Hydro PF22.3 Foam Lance The MTM Hydro is available ready to use with various adapters or can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we are happy to assist. High-quality foam lance made in Italy Patented foam generation technology Stable design with scale for filling Various adaptations for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024 !!! Originally, MTM Hydro did not plan to produce the so-called Wide Mouth. The "inventor" of the PF22.2 was - as far as we know - the US importer, who developed a corresponding retrofit kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (i.e., low pressure). At our urging, Italy's friends eventually made this an official MTM Hydro product, resulting in the PF22.3 and its offered upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon made in Italy for high-pressure cleaners. It can be used with up to 200 bar and a water flow of 11.5 l/min. With a tank capacity of 1,000 ml, the MTM PF22.3 holds more than most foam cannons from other manufacturers. Foam generation and dispensing occur through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.3 offers a variety of adjustment options. You can set the spray pattern from round to flat, adjust the direction of the flat spray horizontally or vertically, and control the concentration of the water/chemical mixture. The MTM Hydro PF22.3 is an upgraded version of the PF22.2, designed with a large filling opening. An upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro comes fully assembled with various adapters, ready for use or can be adapted by yourself using a 1/4-inch screw thread. If you have questions about the correct adapter, we are happy to assist. Various Versions of the MTM Hydro PF22.3 Foam Lance The MTM Hydro comes fully assembled with various adapters, ready for use or can be adapted by yourself using a 1/4-inch screw thread. If you have questions about the correct adapter, we are happy to assist. High-quality foam lance made in Italy Patented foam generation technology Tip-proof with filling scale Various adapters for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024!!! MTM Hydro originally didn't intend to produce the so-called Wide Mouth. The "inventor" of the PF22.2 was - as far as we know - the US importer, who developed a corresponding retrofit kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (low pressure). At our urging to make this an official MTM Hydro product, our Italian friends complied, resulting in the PF22.3 and the offered upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon for high-pressure cleaners made in Italy. The lance can be used with up to 200 bar and a water flow of 11.5 l/min. With a tank volume of 1,000 ml, it holds more than most foam cannons from other manufacturers. Foam generation and dispensing occurs through flow and suction using the brass and stainless steel foam head. The MTM Hydro PF22.3 offers a variety of settings, allowing you to adjust the spray pattern from round to flat, change the direction of the flat spray horizontally or vertically, and set the concentration of the water/chemical mixture. The MTM Hydro PF22.3 is an improved version of the PF22.2 with a large filling opening. An upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro comes ready to use with various adapters or can be adapted using a 1/4 screw thread. For questions regarding the right adapter, we are happy to assist. Various Versions of the PF22.3 Foam Lance from MTM Hydro The MTM Hydro comes ready to use with various adapters or can be adapted using a 1/4 screw thread. For questions regarding the right adapter, we are happy to assist. High-quality foam lance made in Italy Patented foam generation technology Tip-resistant with a scale for filling Various adapters for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024!!! Actually, MTM Hydro didn't intend to produce the so-called Wide Mouth. The "inventor" of the PF22.2 was - as far as we know - the US importer, who developed a corresponding retrofit kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (i.e., low pressure). Following our insistence to make this an official MTM Hydro product, our Italian friends then complied, resulting in the PF22.3 and the offered upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon for pressure washers, produced in Italy. The lance can be used with up to 200 bar and a water flow of 11.5 l/min. With a tank volume of 1,000 ml, the MTM PF22.3 holds more than most foam cannons from other manufacturers. Foam generation and dispensing occur through flow and suction by the brass and stainless steel foam head. The MTM Hydro PF22.3 comes with a variety of adjustment options. You can adjust the spray pattern from round to flat, change the direction of the flat stream horizontally or vertically, and set the concentration of the water/chemical mixture. The MTM Hydro PF22.3 is designed as an improvement over the PF22.2, featuring a large filling opening. An upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro is available pre-assembled with various adapters and ready for use, or it can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we are happy to assist. Various Versions of the PF22.3 Foam Lance from MTM Hydro The MTM Hydro comes pre-assembled with various adapters and is ready for use or can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we are happy to assist. High-quality foam lance produced in Italy Patented foam generation technology Tip-resistant with a filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024 !!! Initially, MTM Hydro did not intend to produce the so-called Wide Mouth. The "inventor" of the PF22.2 was - as far as we know - the US importer, who developed a conversion kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (low pressure). At our urging to make this an official MTM Hydro product, our Italian friends then complied, resulting in the PF22.3 and the offered upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon for high pressure cleaners, made in Italy. The lance can be used with up to 200 bar and a water flow of 11.5 l/min. With a tank volume of 1,000 ml, the MTM PF22.3 holds more than most foam cannons from other manufacturers. Foam generation and discharge occur through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.3 offers a variety of adjustment options, allowing you to set the spray pattern from round to flat, the direction of the flat jet horizontally or vertically, and the concentration of the water/chemical mixture. The MTM Hydro PF22.3 is an advanced version of the PF22.2 with a wide filling opening. A suitable upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro comes ready to use with various pre-assembled adapters or can be adapted using a 1/4 inch screw thread. If you have questions about the correct adapter, we are happy to assist. Different Variants of the MTM Hydro PF22.3 Foam Lance The MTM Hydro comes ready to use with various pre-assembled adapters or can be adapted using a 1/4 inch screw thread. If you have questions about the correct adapter, we are happy to assist. High-quality foam lance from Italian production Patented technology for foam generation Tilt-proof with filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024 !!! Initially, MTM Hydro did not plan to produce the so-called Wide Mouth. The "inventor" of the PF22.2 was, as far as we know, the US importer, who developed a corresponding retrofit kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (low pressure). At our urging, the Italian friends came around to make this an official MTM Hydro product, resulting in the PF22.3 and the offered upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon for high-pressure cleaners, made in Italy. The lance can be used with up to 200 bar and a water flow of 11.5 l/min. With a tank volume of 1,000 ml, the MTM PF22.3 holds more than most foam cannons from other manufacturers. The foam generation and dispensing occur through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.3 features multiple adjustable settings. You can adjust the spray pattern from round to flat, the direction of the flat spray horizontally or vertically, and the concentration of the water/chemical mixture. The MTM Hydro PF22.3 is a development of the PF22.2, designed with a large filling opening. An upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro comes fully assembled with various adapters and is ready for use, or it can be adapted with a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. Different Versions of the PF22.3 Foam Lance from MTM Hydro The MTM Hydro is available fully assembled with various adapters and is ready to use or can be adapted with a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. High-quality foam lance from Italian production Patented technology for foam generation Tip-resistant with scale for filling Various adaptations for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024 !!! Initially, MTM Hydro did not intend to produce the so-called Wide Mouth variant. The "inventor" of the PF22.2 was - as far as we know - the US importer, who developed a corresponding retrofit kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (i.e., low pressure). At our urging to make this an official MTM Hydro product, our Italian friends eventually complied, leading to the creation of the PF22.3 and the offered upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon made in Italy for high-pressure cleaners. The lance can be used with up to 200 bar and a water flow rate of 11.5 l/min. With a capacity of 1,000 ml, the MTM PF22.3 container holds more than most foam cannons from other manufacturers. Foam generation and delivery occur via flow and suction through the brass and stainless steel foam head. The MTM Hydro PF22.3 offers a variety of adjustment options. The spray pattern can be adjusted from round to flat, the direction of the flat spray to horizontal or vertical, and the concentration of the water/chemical mixture can be set. The MTM Hydro PF22.3 is a further development of the PF22.2 with a large filling opening. A corresponding upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro is delivered pre-assembled with various adapters and ready for use or can be self-adapted via a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. Different Versions of the PF22.3 Foam Lance by MTM Hydro The MTM Hydro is delivered pre-assembled with various adapters and ready for use or can be self-adapted via a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. High-quality foam lance made in Italy Patented foam generation technology Tilt-proof with filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024!!! Originally, MTM Hydro did not intend to produce the so-called Wide Mouth. The "inventor" of the PF22.2 was - as far as we know - the US importer who developed a retrofit kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (low pressure). At our urging to make this an official MTM Hydro product, our Italian friends eventually complied, and the PF22.3 and the offered upgrade kit were created.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon for high-pressure cleaners produced in Italy. It can be used with up to 200 bar and a water flow of 11.5 l/min. With a tank volume of 1,000 ml, the MTM PF22.3 holds more than most foam cannons from other manufacturers. Foam generation and dispensing occur through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.3 features various adjustment options. You can adjust the spray nozzle from round to flat, set the direction of the flat spray horizontally or vertically, and control the concentration of the water/chemical mixture. The MTM Hydro PF22.3 is designed as an upgraded version of the PF22.2 with a larger filling opening. An upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro comes ready to use with various adapters or can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. Different Versions of the PF22.3 Foam Lance from MTM Hydro The MTM Hydro is delivered ready to use with different adapters or can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. High-quality foam lance produced in Italy Patented technology for foam generation Tip-proof with filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024 !!! Originally, MTM Hydro did not intend to produce the so-called Wide Mouth. The "inventor" of the PF22.2 was - as far as we know - the US importer, who developed a corresponding upgrade kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (low pressure). At our insistence to make this an official MTM Hydro product, our Italian friends then came back and created the PF22.3 along with the offered upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth Upgrade Kit for the MTM Hydro PF22.2 Foam Cannon! It's true that the introduction of the PF22.2 Foam Cannon took a long time here. As the sole provider, we dared to tackle this topic. The background of the effort was the complex compilation of corresponding adapter sets, as MTM Hydro does not offer its own Quick Connect adapters. After establishing a stable foundation in our collaboration with MTM Hydro over the past months, things have sped up a bit, and we can now welcome the Upgrade Kit for the PF22.3 with a wider opening - Wide Mouth - to our range. MTM Hydro PF22.3 Wide Mouth Upgrade Kit Upgrade kit consisting of an adapter piece and a bottle with a large opening Perfect for existing PF22.2 and PF22.1 users Original MTM Hydro - Made in Italy Initially, MTM Hydro did not intend to produce the so-called Wide Mouth. The "inventor" of the PF22.3 was - as far as we know - the US importer, who developed a retrofit kit for the PF22.2 Foam Cannon based on the new GHF1, a foam cannon for garden hoses (low pressure). After numerous requests to make this an official MTM Hydro product, our Italian friends eventually complied, leading to the PF22.3 and its Upgrade Kit.

MTM Hydro Car Wash Kits for pressure washers are professional sets designed for both private and commercial vehicle cleaning. With the Quick Connect attachment, nozzles and foam lances can be easily connected to the pressure gun and lance. The angled lance allows for easier access to vehicle areas such as the roof, underbody, and wheels. The pressure gun features a 3/8 Quick Connect inlet. These kits combine the globally used spray guns from car washes, made of high-quality materials, with the Quick Connect quick-change system from Detail Passion for 1/4 or 3/8 inch. This system is suitable for pressure washers with a flow rate of approximately 8 to 12 liters per minute up to 200 bar. All connecting adapters are made of high-quality stainless steel. Assembly can be done using PTFE sealing tape or Loxeal 53-14 thread sealant. MTM Hydro Pro Car Wash Kit Pressure Washer SG28 + Lance MTM Hydro SG28 Pressure Gun Swivel Inlet Wash Gun G3/8F to G1/4F MTM Hydro ILS28 SQR Pressure Lance Quick Connect angled stop protection 50cm DP Pro 3/8in Quick Connect M nipple Quick Connect stainless steel for MTM Hydro DP Pro 1/4in Quick Connect M Quick Connect stainless steel for MTM Hydro DP Pro 1/4in Nozzle Quick Connect 40 degrees white for MTM Hydro Adaptation to Pressure Washers from Kärcher, Nilfisk, Kränzle, and Co. Most professional pressure washers are equipped with M22 threaded connections on the hose. These can either be complemented with 3/8 quick couplings or adapted to the pressure gun via threading. We offer corresponding adapters and are happy to assist with choosing the right combination.

MTM Hydro Foam Kits for pressure washers are professional sets for car washing in both private and commercial use. These kits combine high-quality spray guns widely used in car washes and are adapted for the Quick Connect system by Detail Passion for 1/4 or 3/8 inch connections. The system is designed for pressure washers with a flow rate of approximately 8 to 12 liters per minute up to 200 bar. All connection adapters are made of high-quality stainless steel. Assembly can be done using PTFE sealing tape or Loxeal 53-14 thread sealant. Included in the MTM Hydro Pro Foam Kit MTM Hydro SG28 High Pressure Gun Swivel Inlet Wash Gun G3/8F to G1/4F MTM Hydro PF22.2 G1/4F Professional Foam Cannon 1000ml DP Pro 1/4in Quick Connect Male Nipple Stainless Steel for MTM Hydro DP Pro 1/4in Quick Connect Male Coupling Stainless Steel for MTM Hydro DP Pro 3/8in Quick Connect Male Nipple Stainless Steel for MTM Hydro DP Pro 1/4in Nozzle Quick Connect 40 Degree White for MTM Hydro Possible Washing Methods with the MTM Hydro Foam Kit This set includes the leading foam cannon PF22.2, which can be mounted to the pressure gun using the 1/4 Quick Connect system. Pre-cleaners, shampoos for the subsequent hand wash, and sealant foams can be applied with the PF22.2 foam cannon and processed either with a microfiber wash pad or wash glove. The PF22.2 features an adjustable foam head that can be continually modified for concentration levels. This allows for perfect foam creation tailored to your needs. The set also includes a 40-degree nozzle suited for rinsing and final cleaning. With a generous spray angle of 40 degrees, intense yet safe application during vehicle cleaning is achievable. Due to the compact size and close spray angle to the vehicle, minimal water consumption and quick washing are possible. The pressure gun is equipped with a swivel end piece, ensuring maximum movement freedom and working comfort. Adaptation to Pressure Washers from Kärcher, Nilfisk, Kränzle and others Most professional pressure washers come with M22 thread fittings on the hoses. These can be supplemented with 3/8 quick couplings or adapted to the pressure gun using connections. We offer corresponding adapters and are happy to assist in choosing the right combination.

MTM Hydro Full Kits for pressure washers are professional sets for automotive washing in both private and commercial use. MTM Hydro Foam Kits combine high-quality materials and features used globally in car washes, including the PF22.2 foam lance, an angled spray lance, and an adaptation for the Quick Connect system by Detail Passion for 1/4 or 3/8 inch. The angled lance allows for easier access to vehicle areas such as the roof, undercarriage, and wheels. The sets also include quick couplings for connecting the pressure gun to M22 fittings. This system is designed for pressure washers with a flow rate of approximately 8 to 12 liters per minute up to 200 bar. All connection adapters are made from high-quality stainless steel. Assembly can be done using PTFE sealing tape or Loxeal 53-14 thread sealant. MTM Hydro Pro Full Kit includes MTM Hydro SG28 High Pressure Gun Swivel Inlet Wash Gun G3/8F to G1/4F MTM Hydro ILS28 SQR High Pressure Lance Quick Connect Angled End Protection MTM Hydro PF22.2 G1/4F Professional Foam Cannon 1000ml DP Pro 3/8in Quick Release M Nipple Quick Connect Stainless Steel for MTM Hydro DP Pro 3/8in M22 M Quick Connect Coupling Brass 14mm Diameter for MTM Hydro DP Pro 3/8in M22 M Quick Connect Coupling Brass 15mm Diameter for MTM Hydro DP Pro 1/4in Quick Coupling M Quick Connect Stainless Steel for MTM Hydro DP Pro 1/4in Quick Release M Nipple Quick Connect Stainless Steel for MTM Hydro DP Pro 1/4in Nozzle Quick Connect 40 Degree White for MTM Hydro Possible Washing Methods with the MTM Hydro Foam Kit The set includes the leading PF22.2 foam cannon, which can be mounted onto the pressure gun via the 1/4 Quick Connect system. Pre-cleaners, shampoos for subsequent hand washing, and sealing foams can be applied using the PF22.2 foam cannon and can be processed as desired with a microfiber wash pad or wash mitt. The PF22.2 features a variable foam head that can be adjusted continuously in concentration, allowing for perfect foam formation tailored to needs. The set also includes a 40-degree nozzle for the 1/4 Quick Connect, suitable for rinsing and final cleaning. With a generous spray angle of 40 degrees, it ensures intensive yet safe application during vehicle cleaning. Due to the compact overall size and spray angle, minimal water consumption and quick washing are achievable. The pressure guns are equipped with a swivel end, ensuring maximum freedom of movement and working comfort.

MTM Hydro Nozzle Holder NH36 is designed for Quick Connect couplings and nozzles. Its rubber coating provides ideal impact protection. MTM Hydro QC Nozzle Holder NH36 G1/4F to G1/4F Quick Connect Couplings Nozzle holder for Quick Connect couplings Also suitable for nozzles High-quality rubber coating

Stainless steel wool for foam generation as a replacement insert for MTM Hydro PF22 foam wands. MTM Hydro original replacement part Compatible with MTM Hydro PF22 foam wands Made of stainless steel

The MTM PF22.2 Replacement Tank is designed as a spare part for the MTM Hydro PF22.2 foam lances, but it can also be used with existing MTM Hydro PF22 foam lances or other foam lances with the same thread. The highlight: The tank features a tilt-proof design, making it ideal for filling and storage. Original MTM Hydro spare part Compatible with MTM Hydro PF22 foam lances (1st generation), among others Tilt-proof construction with filling scale

The MTM Hydro RLS28 is the universal high-pressure gun for vehicle cleaning. It features a stop protection and is designed to accommodate screw nozzles. The lance is fully assembled and comes with a 1/4 QuickConnect fitting. MTM Hydro RLS28 SQR High Pressure Gun QuickConnect 50cm Complete 1/4 QuickConnect high-pressure lance Total length 50cm Angled tip, handle around the stainless steel tube Approved for cold and hot water Operating pressure up to 280 bar

MTM Hydro Rubber Bumper for High Pressure Lances. Ideal for use with DP Pro QuickConnect couplings on MTM Hydro's ILS or RLS lances. Made from high-quality rubber. MTM Hydro Rubber Bumper for High Pressure Lance Quick Connect Rubber bumper for Quick Connect couplings Perfect for MTM Hydro ILS / RLS high pressure lances High-quality rubber construction

MTM Hydro SG28 is a professional high-pressure gun for pressure washers like Kränzle, Dibo, Kärcher, and Nilfisk. Manufactured in Italy by MTM Hydro, this gun is commonly used in car washes and cleaning stations. With appropriate adapters, the gun can be adapted to professional pressure washers. The industry-leading "Easy Hold" design allows for smooth trigger operation and pressure-free holding. The gun is shock-resistant, and the plastic - partially rubberized - is user-friendly. Professional gun for pressure washers "Easy Hold" technology - smooth operation and pressure-free holding Materials: plastic, brass, stainless steel Inlet: 3/8 female thread Outlet: 1/4 female thread Hot water release: up to 160 °C Flow rate: up to 45 l/min Max. pressure release: 280 bar Max. operating pressure: 250 bar Accessories and adapters are available from DP Pro and MTM Hydro.

The MTM Hydro SGS35 is a professional high-pressure gun designed for pressure washers such as Kränzle, Dibo, Kärcher, and Nilfisk. Manufactured in Italy, this high-pressure gun is commonly used in car washes and cleaning stations. With appropriate adapters, it can be connected to professional pressure washers. The industry-leading "Easy Hold" feature ensures the trigger operates smoothly and can be held without pressure. The gun is shock-resistant, with a partially rubberized plastic that feels user-friendly. The inlet of the SGS35 is rotational, preventing hose tangling. The MTM Hydro SGS35 is primarily made of stainless steel. Professional gun for pressure washers "Easy Hold" technology - smooth operation, pressure-free hold Materials: Plastic, Stainless Steel, Nickel-Plated Brass Inlet: 3/8 female - rotational Outlet: 1/4 female Hot water tolerance: up to 160 °C Flow rate tolerance: up to 45 l/min Max. pressure tolerance: 350 bar Max. operating pressure: 310 bar Accessories and adapters are available from DP Pro and MTM Hydro.

MTM Hydro Car Wash Kits for pressure washers are professional sets for car cleaning in private and commercial use. Thanks to the Quick Connect connection, nozzles and foam lances can be easily attached to both the pressure gun and lance. The angled lance allows for easier access to vehicle areas such as the roof, undercarriage, and rims. The pressure gun features a 3/8 Quick Connect inlet. The kits are a combination of high-quality spray guns used worldwide in car washes and an adaptation to the Quick Connect system from Detail Passion for 1/4 or 3/8 inch. The system is designed for pressure washers with a flow rate of approximately 8 to 12 liters per minute up to 200 bar. All connection adapters are made from high-quality stainless steel. Assembly can be done using PTFE sealing tape or Loxeal 53-14 thread sealant. MTM Hydro Pro Car Wash Kit Pressure Washer Spray Gun SGS35 + Lance MTM Hydro SGS35 Pressure Gun Swivel Inlet Wash Gun G3/8F to G1/4F MTM Hydro ILS28 SQR Pressure Lance Quick Connect Angled Stop 50cm DP Pro 3/8in Quick Disconnect M Nipple Quick Connect Stainless Steel for MTM Hydro DP Pro 1/4in Quick Coupling M Quick Connect Stainless Steel for MTM Hydro DP Pro 1/4in Nozzle Quick Connect 40 Degree White for MTM Hydro Adaptation to Pressure Washers from Kärcher, Nilfisk, Kränzle and Co. Most professional pressure washers are equipped with M22 threaded connections on hoses. These can either be supplemented with 3/8 quick couplings or adapted with a coupling to the pressure gun. We carry the corresponding adapters and are happy to help you choose the right combination.

MTM Hydro Foam Kits for pressure washers are professional sets for car washing in both private and commercial use. The MTM Hydro Foam Kits combine high-quality spray guns used worldwide in car wash facilities with adaptations for the Quick Connect system by Detail Passion for 1/4 or 3/8 inch. The system is designed for pressure washers with a flow rate of approximately 8 to 12 liters per minute up to 200 bar. All connection adapters are made from high-quality stainless steel. Assembly can be done using PTFE sealing tape or Loxeal 53-14 thread sealant. What's Included in the MTM Hydro Ultra Foam Kit MTM Hydro SGS35 Pressure Gun Swivel Inlet Wash Gun G3/8F to G1/4F MTM Hydro PF22.2 G1/4F Professional Foam Canon 1000ml DP Pro 1/4in Quick Connect M Stainless Steel Nipple for MTM Hydro DP Pro 1/4in Quick Connect M Stainless Steel Coupling for MTM Hydro DP Pro 3/8in Quick Connect M Stainless Steel Nipple for MTM Hydro DP Pro 1/4in Nozzle Quick Connect 40 Degree White for MTM Hydro Washing Methods with the MTM Hydro Foam Kit This kit includes the leading PF22.2 foam cannon, which can be attached to the pressure gun using the 1/4 Quick Connect system. Pre-cleaners, shampoos for subsequent hand washing, and sealant foams can be applied with the PF22.2 foam cannon and can be processed with a microfiber wash pad or wash mitt as desired. The PF22.2 features a variable foam head that can be adjusted in concentration continuously. This allows for perfect foam consistency tailored to your needs. The kit also includes a 40-degree nozzle for the 1/4 Quick Connect, suitable for rinsing and final cleaning. With a generous spray angle of 40 degrees, intense yet safe application during vehicle cleaning is possible. The compact overall size and spray angle keep the distance to the vehicle very short, ensuring minimal water usage and quick washing. The pressure gun is equipped with a swivel end for maximum maneuverability and working comfort. Adapter for Pressure Washers from Kärcher, Nilfisk, Kränzle, and Others Most professional pressure washers come with M22 threaded connections on the hose. These can either be supplemented with 3/8 quick couplings or adapted to the pressure gun via threading. We offer corresponding adapters and are happy to assist with choosing the right combination.

MTM Hydro Full Kits for high-pressure cleaners are professional sets for car washing in private and commercial use. MTM Hydro Foam Kits combine the spray guns used worldwide in wash parks, made from high-quality materials, the PF22.2 foam lance, an angled spray lance, and an adaptation to the Quick Connect quick-change system from Detail Passion for 1/4 or 3/8 inch. The angled lance allows for much easier access to vehicle areas such as roofs, undercarriages, and wheels. The sets also include quick couplings for connecting the high-pressure gun to M22 fittings. The system is designed for high-pressure cleaners with a flow rate of approximately 8 to 12 liters per minute up to 200 bar. All connection adapters are made of high-quality stainless steel. Assembly can be done using PTFE sealing tape or Loxeal 53-14 thread sealant. MTM Hydro Ultra Full Kit Includes MTM Hydro SGS35 High Pressure Gun Swivel Inlet Wash Gun G3/8F to G1/4F MTM Hydro ILS28 SQR High Pressure Lance Quick Connect Angled Nozzle Guard MTM Hydro PF22.2 G1/4F Professional Foam Cannon 1000ml DP Pro 3/8in Quick Connect M Nipple Quick Connect Stainless Steel for MTM Hydro DP Pro 3/8in M22 M Quick Connect Coupling Brass 14mm Diameter for MTM Hydro DP Pro 3/8in M22 M Quick Connect Coupling Brass 15mm Diameter for MTM Hydro DP Pro 1/4in Quick Coupling M Quick Connect Stainless Steel for MTM Hydro DP Pro 1/4in Quick Connect M Nipple Quick Connect Stainless Steel for MTM Hydro DP Pro 1/4in Nozzle Quick Connect 40 Degree White for MTM Hydro Possible Washing Methods with the MTM Hydro Foam Kit The set includes the leading foam cannon PF22.2, which can be mounted to the high-pressure gun via the 1/4 quick-change system Quick Connect. Pre-cleaners, shampoos for subsequent hand washing, and sealant foams can be applied with the PF22.2 foam cannon, and can be processed according to your choice with a microfiber wash pad or wash mitt. The PF22.2 is equipped with a variable foam head and can be adjusted continuously in concentration. This allows for perfect foam formation tailored to individual needs. The set also includes a 40-degree nozzle for the 1/4 Quick Connect that is suitable for rinsing and final cleaning. With a generous spray angle of 40 degrees, an intense yet safe application during vehicle cleaning is possible. Due to the compact overall size and spray angle, the distance to the vehicle can be kept very short, ensuring minimal water consumption and quick washing. The high-pressure guns are equipped with a swivel end, allowing for maximum freedom of movement and work comfort.