Gtechniq ClearVision Smart Glass G1 + G2 + G4 100ml

The glass should be clean. Deep-seated dirt can be polished out with Gtechniq G4. Before applying Smart Glass G1, the glass should also be cleaned with a glass cleaner free of smoothing additives or an IPA solution. To ensure maximum longevity, G1 should be applied to the windshield in 3 layers. Divide the windshield into 3-4 sections from left to right. 1st layer: circular movements (cloud motion) with light pressure using an AP1 pad, ideally taking 60-90 seconds for one section. 2nd layer: Approximately 5 minutes later, the 1st layer should be “overpainted” in one stroke with left-right movements. 3rd layer: Ideally after 5 minutes, the 2nd layer should be “overpainted” from bottom to top. Excess removal after 15 minutes: Soak another AP1 applicator with G2 and remove excess in small areas, then immediately polish the area. Wiper blades: Treat with G1 without excess remover or clean with G6 to prevent wiper chatter. However, wiper chatter will also naturally occur after about 2 weeks. We have also published a video on our YouTube channel for applying Gtechniq G1.