Product information "Gtechniq Heavy Cut Compound AHCC 1000ml"
Gtechniq Heavy Cut Compound AHCC – High-Performance Cutting Compound for Professional Paint Correction
The Gtechniq Heavy Cut Compound AHCC is a high-performance cutting compound with high correction power, specially developed for professional paint correction and the removal of pronounced paint defects. With its advanced abrasive particle technology, the Heavy Cut Compound effectively removes deeper scratches, sanding marks, heavy swirls and noticeable signs of use from vehicle paintwork. Despite its high cutting performance, the Gtechniq AHCC leaves a visibly refined paint surface that is ideally prepared for subsequent polishing steps. The silicone-free, low-dust formulation enables clean processing and makes this heavy cut paint compound the ideal choice for professional vehicle detailers and discerning car care enthusiasts.
- High cutting performance for effectively removing pronounced paint defects
- Removes scratches, sanding marks, heavy swirls and signs of use from vehicle paintwork
- Modern, diminishing abrasives for controlled paint correction
- High paint correction power with a refined finish as an ideal basis for further polishing steps
- Silicone-free formulation for professional paint preparation
- Low-dust processing for clean and efficient work
- Easy-to-wipe polishing residue for uncomplicated inspection of the polishing result
- Ideal for dual-action polishers from Flex, ShineMate and Rupes
- Perfectly compatible with high-quality polishing pads from Detail Passion, Rupes and Lake Country
- Optimally matched to Gtechniq Medium Cut Polish AMCP and Finishing Polish AFP
- For professional paint correction on various vehicle paint systems
Heavy Cut compound for maximum defect correction and high paint removal
Deep scratches, pronounced wash marks, sanding marks and noticeable signs of use significantly affect the appearance of vehicle paintwork. The Gtechniq Heavy Cut Compound AHCC was developed to correct these paint defects quickly and effectively. As a powerful heavy cut compound for automotive paint, it offers a high abrasive effect and enables efficient treatment of heavily stressed paint surfaces.
The modern technology featuring abrasives that break down during the polishing process combines intensive defect correction with an exceptionally clean finish for this class of compound. This allows even demanding paint correction work to be carried out efficiently, while simultaneously preparing the surface for subsequent fine and high-gloss polishing. The actual correction performance depends on paint hardness, defect depth and the combination of polishing machine and polishing pad used.
Modern abrasive particle technology for efficient paint preparation
The Gtechniq AHCC cutting compound uses advanced diminishing abrasives that combine high initial correction power with increasingly fine surface treatment. This technology supports controlled removal of paint defects and reduces the intensity of processing marks that can occur with high-performance cutting compounds.
Gtechniq Heavy Cut Compound offers a significant advantage, particularly during multi-stage paint correction. Its high cutting performance enables effective defect removal, while the refined paint finish provides an excellent basis for subsequent treatment with a Medium Cut or Finishing Polish. This makes it possible to correct heavy paint defects without compromising on high-quality surface finish.
Silicone-free and low-dust cutting compound for professional results
A key feature of the Gtechniq Heavy Cut Compound AHCC is its silicone-free and low-dust formulation. During intensive paint correction, minimal dust development is beneficial because it reduces contamination of adjacent vehicle areas and keeps the working environment cleaner. The easy removal of polishing residue also simplifies assessment of the correction result achieved.
By avoiding silicones, the Gtechniq AHCC is excellently suited to professional detailing processes where controlled paint correction and reliable further treatment are the priority. The combination of high cutting performance, low dust development and easy residue removal makes it a powerful solution for demanding polishing work.
Perfectly matched to Gtechniq Medium Cut Polish AMCP and Finishing Polish AFP
The Gtechniq Heavy Cut Compound AHCC forms the powerful cutting stage within the coordinated Gtechniq polishing system. Together with the Gtechniq Medium Cut Polish AMCP and the Gtechniq Finishing Polish AFP, it provides a well-designed solution for professional multi-stage paint correction. From removing heavy paint defects to achieving a mirror-like high-gloss finish, the individual compounds can be combined as required.
- Gtechniq Heavy Cut Compound AHCC: Powerful cutting compound for intensive paint correction and the removal of heavier scratches, sanding marks, pronounced swirls and noticeable signs of use.
- Gtechniq Medium Cut Polish AMCP: Medium-strength paint polish for removing moderate paint defects and further refining the surface with a high-gloss finish.
- Gtechniq Finishing Polish AFP: Fine high-gloss polish for the final removal of light polishing marks, micro-scratches and holograms, creating a mirror-like paint finish.
Depending on paint hardness and the finish achieved, work can proceed directly from the Heavy Cut Compound to the Gtechniq Finishing Polish AFP. For more demanding paint surfaces or visible processing marks, the additional intermediate step with the Medium Cut Polish AMCP is recommended. The targeted coordination of the polishing stages makes it possible to achieve a high-quality result with efficient defect correction and maximum gloss.
Ideal for dual-action polishers from Flex, ShineMate and Rupes
The Gtechniq Heavy Cut Compound AHCC integrates excellently into professional polishing systems with modern dual-action polishers. Particularly in combination with high-performance machines from Flex, ShineMate and Rupes, the cutting compound provides high correction performance with controlled processing. The modern abrasive particle technology supports even paint removal and enables targeted correction of pronounced paint defects.
Its high cutting performance makes the Gtechniq AHCC particularly interesting for discerning vehicle detailers looking for an efficient cutting compound for dual-action polishers. Depending on the condition of the paint and the polishing technique used, the correction power can be specifically adjusted by selecting the appropriate polishing pad.
Optimal combination with polishing pads from Detail Passion, Rupes and Lake Country
Choosing the right polishing pad is crucial for the achievable correction performance when using a high-performance cutting compound. The Gtechniq Heavy Cut Compound AHCC works excellently with high-quality polishing pads from Detail Passion, Rupes and Lake Country. Depending on paint hardness, defect severity and the desired level of paint removal, different pad materials and hardness levels can be used.
Abrasive foam pads, microfiber pads or suitable wool pads are particularly suitable for intensive paint correction. While powerful cutting pads support defect correction, less aggressive polishing pads can influence the balance between cutting performance and surface finish. The appropriate combination of Gtechniq AHCC, dual-action polisher and high-quality cutting pad creates a powerful polishing system for professional paint preparation.
Gtechniq Heavy Cut Compound AHCC – the cutting compound for demanding paint correction
Whether intensive vehicle detailing, removal of pronounced paint defects or professional multi-stage paint correction: The Gtechniq Heavy Cut Compound AHCC impresses as a modern heavy cut compound for automotive paint with its high correction power, advanced abrasive particle technology and low-dust, silicone-free formulation. It enables efficient correction of heavy paint defects and leaves a refined surface for subsequent polishing steps.
As the powerful first stage of the Gtechniq polishing system, AHCC perfectly complements Medium Cut Polish AMCP and Finishing Polish AFP. Anyone looking for a high-quality cutting compound for removing scratches, sanding marks, swirls and heavy paint defects will find the Gtechniq Heavy Cut Compound AHCC to be a professional solution for demanding paint correction and high-quality detailing results.
| Country of production: | Großbritannien |
|---|---|
| Volume: | 1000ml |
Login
Gtechniq Heavy Cut Compound AHCC 1000ml
€67.90
Product information "Gtechniq Heavy Cut Compound AHCC 1000ml"
Gtechniq Heavy Cut Compound AHCC – High-Performance Cutting Compound for Professional Paint Correction
The Gtechniq Heavy Cut Compound AHCC is a high-performance cutting compound with high correction power, specially developed for professional paint correction and the removal of pronounced paint defects. With its advanced abrasive particle technology, the Heavy Cut Compound effectively removes deeper scratches, sanding marks, heavy swirls and noticeable signs of use from vehicle paintwork. Despite its high cutting performance, the Gtechniq AHCC leaves a visibly refined paint surface that is ideally prepared for subsequent polishing steps. The silicone-free, low-dust formulation enables clean processing and makes this heavy cut paint compound the ideal choice for professional vehicle detailers and discerning car care enthusiasts.
- High cutting performance for effectively removing pronounced paint defects
- Removes scratches, sanding marks, heavy swirls and signs of use from vehicle paintwork
- Modern, diminishing abrasives for controlled paint correction
- High paint correction power with a refined finish as an ideal basis for further polishing steps
- Silicone-free formulation for professional paint preparation
- Low-dust processing for clean and efficient work
- Easy-to-wipe polishing residue for uncomplicated inspection of the polishing result
- Ideal for dual-action polishers from Flex, ShineMate and Rupes
- Perfectly compatible with high-quality polishing pads from Detail Passion, Rupes and Lake Country
- Optimally matched to Gtechniq Medium Cut Polish AMCP and Finishing Polish AFP
- For professional paint correction on various vehicle paint systems
Heavy Cut compound for maximum defect correction and high paint removal
Deep scratches, pronounced wash marks, sanding marks and noticeable signs of use significantly affect the appearance of vehicle paintwork. The Gtechniq Heavy Cut Compound AHCC was developed to correct these paint defects quickly and effectively. As a powerful heavy cut compound for automotive paint, it offers a high abrasive effect and enables efficient treatment of heavily stressed paint surfaces.
The modern technology featuring abrasives that break down during the polishing process combines intensive defect correction with an exceptionally clean finish for this class of compound. This allows even demanding paint correction work to be carried out efficiently, while simultaneously preparing the surface for subsequent fine and high-gloss polishing. The actual correction performance depends on paint hardness, defect depth and the combination of polishing machine and polishing pad used.
Modern abrasive particle technology for efficient paint preparation
The Gtechniq AHCC cutting compound uses advanced diminishing abrasives that combine high initial correction power with increasingly fine surface treatment. This technology supports controlled removal of paint defects and reduces the intensity of processing marks that can occur with high-performance cutting compounds.
Gtechniq Heavy Cut Compound offers a significant advantage, particularly during multi-stage paint correction. Its high cutting performance enables effective defect removal, while the refined paint finish provides an excellent basis for subsequent treatment with a Medium Cut or Finishing Polish. This makes it possible to correct heavy paint defects without compromising on high-quality surface finish.
Silicone-free and low-dust cutting compound for professional results
A key feature of the Gtechniq Heavy Cut Compound AHCC is its silicone-free and low-dust formulation. During intensive paint correction, minimal dust development is beneficial because it reduces contamination of adjacent vehicle areas and keeps the working environment cleaner. The easy removal of polishing residue also simplifies assessment of the correction result achieved.
By avoiding silicones, the Gtechniq AHCC is excellently suited to professional detailing processes where controlled paint correction and reliable further treatment are the priority. The combination of high cutting performance, low dust development and easy residue removal makes it a powerful solution for demanding polishing work.
Perfectly matched to Gtechniq Medium Cut Polish AMCP and Finishing Polish AFP
The Gtechniq Heavy Cut Compound AHCC forms the powerful cutting stage within the coordinated Gtechniq polishing system. Together with the Gtechniq Medium Cut Polish AMCP and the Gtechniq Finishing Polish AFP, it provides a well-designed solution for professional multi-stage paint correction. From removing heavy paint defects to achieving a mirror-like high-gloss finish, the individual compounds can be combined as required.
- Gtechniq Heavy Cut Compound AHCC: Powerful cutting compound for intensive paint correction and the removal of heavier scratches, sanding marks, pronounced swirls and noticeable signs of use.
- Gtechniq Medium Cut Polish AMCP: Medium-strength paint polish for removing moderate paint defects and further refining the surface with a high-gloss finish.
- Gtechniq Finishing Polish AFP: Fine high-gloss polish for the final removal of light polishing marks, micro-scratches and holograms, creating a mirror-like paint finish.
Depending on paint hardness and the finish achieved, work can proceed directly from the Heavy Cut Compound to the Gtechniq Finishing Polish AFP. For more demanding paint surfaces or visible processing marks, the additional intermediate step with the Medium Cut Polish AMCP is recommended. The targeted coordination of the polishing stages makes it possible to achieve a high-quality result with efficient defect correction and maximum gloss.
Ideal for dual-action polishers from Flex, ShineMate and Rupes
The Gtechniq Heavy Cut Compound AHCC integrates excellently into professional polishing systems with modern dual-action polishers. Particularly in combination with high-performance machines from Flex, ShineMate and Rupes, the cutting compound provides high correction performance with controlled processing. The modern abrasive particle technology supports even paint removal and enables targeted correction of pronounced paint defects.
Its high cutting performance makes the Gtechniq AHCC particularly interesting for discerning vehicle detailers looking for an efficient cutting compound for dual-action polishers. Depending on the condition of the paint and the polishing technique used, the correction power can be specifically adjusted by selecting the appropriate polishing pad.
Optimal combination with polishing pads from Detail Passion, Rupes and Lake Country
Choosing the right polishing pad is crucial for the achievable correction performance when using a high-performance cutting compound. The Gtechniq Heavy Cut Compound AHCC works excellently with high-quality polishing pads from Detail Passion, Rupes and Lake Country. Depending on paint hardness, defect severity and the desired level of paint removal, different pad materials and hardness levels can be used.
Abrasive foam pads, microfiber pads or suitable wool pads are particularly suitable for intensive paint correction. While powerful cutting pads support defect correction, less aggressive polishing pads can influence the balance between cutting performance and surface finish. The appropriate combination of Gtechniq AHCC, dual-action polisher and high-quality cutting pad creates a powerful polishing system for professional paint preparation.
Gtechniq Heavy Cut Compound AHCC – the cutting compound for demanding paint correction
Whether intensive vehicle detailing, removal of pronounced paint defects or professional multi-stage paint correction: The Gtechniq Heavy Cut Compound AHCC impresses as a modern heavy cut compound for automotive paint with its high correction power, advanced abrasive particle technology and low-dust, silicone-free formulation. It enables efficient correction of heavy paint defects and leaves a refined surface for subsequent polishing steps.
As the powerful first stage of the Gtechniq polishing system, AHCC perfectly complements Medium Cut Polish AMCP and Finishing Polish AFP. Anyone looking for a high-quality cutting compound for removing scratches, sanding marks, swirls and heavy paint defects will find the Gtechniq Heavy Cut Compound AHCC to be a professional solution for demanding paint correction and high-quality detailing results.
| Country of production: | Großbritannien |
|---|---|
| Volume: | 1000ml |
Login
Recommandations
German brand Detail Passion taps into the hype around thermal stable polishing pads with their DP Pro Therminator line, adding unique innovations. Thermal stability means consistent paint and clear coat removal during polishing as the foam doesn’t lose density from heat. This keeps pressure steady at higher speeds, preventing cutting power drop-off. The cell structure is also preserved for optimal cooling and minimized pad compression. Building on experience with high-speed heavy cut polishes like 3D Car Care 510 and versatile 3D One Hybrid, Detail Passion gives these pads special advanced features. DP Pro Therminator white - Super Heavy Cut for severe paint defects DP Pro Therminator orange - Medium Cut for One Step, All-in-One or moderate polishes DP Pro Therminator maroon - Medium Polish for medium polishes and finishing DP Pro Therminator black - Gloss finish for sensitive paints or extreme gloss From Super Heavy Cut to Finish: DP Pro Therminator Pads for rotary & dual-action use Unlike other thermal stable pads, DP Pro Therminators focus on cell structure and polish distribution. Conventional thermopads often cause uneven or no polish spread during contact, causing mid-hard pads to dry out quickly. These pads are optimized for long-stroke dual action machines like Rupes LHR15, ShineMate EX620, Makita POC, Flex XFE, delivering fast cut or glossy finish depending on choice. They perfectly complement hybrid wool or microfiber heavy cut pads or work as standalone solutions.
The DP Pro Therminator polishing pads from German manufacturer Detail Passion embrace the hype around thermally stable or heat-resistant pads while adding their unique innovations. These pads ensure consistent paint and clear coat removal during polishing by maintaining foam hardness despite heat. This allows sustained pressure even at high speeds without loss of cutting power. The cell structure is preserved, optimizing cooling and minimizing compression. Building on experience with fast heavy cut polishes like 3D Car Care 510 and versatile 3D One Hybrid, Detail Passion has added special features to their polishing foam.DP Pro Therminator white - Super Heavy Cut for severe paint defectsDP Pro Therminator orange - Medium Cut for One Step, All-in-One or medium polishesDP Pro Therminator maroon - Medium Polish for medium polishes and finishingDP Pro Therminator black - Gloss finish for delicate paints or extreme glossFrom Super Heavy Cut to Finish: DP Pro Therminator Pads for Rotary and Dual-Action UseUnlike other thermally stable pads, DP Pro Therminator prioritizes cell structure and polish distribution for even coverage. Conventional thermo pads often cause uneven or no polish distribution during application, especially with medium-hard pads, risking premature drying. Optimized for large throw dual-action polishers like Rupes LHR15, ShineMate EX620, Makikato POC, and Flex XFE, these pads deliver impressively fast cutting or a high-gloss finish depending on the chosen type. They can be combined with Hybrid Wool or microfiber heavy cut pads or used alone as a complete system.
Detail Passion Therminator+ Polishing Pad – High-End Performance Polishing The Detail Passion Therminator+ Polishing Pad sets new standards for modern dual-action polishers. Designed for the highest demands, this innovative pad combines thermally stabilized foam with a specially tuned interface. The result: maximum smoothness, optimized self-rotation, and unmatched polishing efficiency. Available for 75mm and 125mm backing plates Perfect for dual-action and forced dual-action polishers Optimized eccentric stroke transfer Thermally stabilized high-performance foam Innovative interface pad for superior control Center hole enhances heat dissipation even on 75mm version Made in Germany Innovative Interface Pad – True Power Transfer Without Compromise The Therminator+ pads feature a specially developed interface pad focused on maximum, low-loss transfer of the eccentric motion. Unlike many pads that rely on soft structures for vibration damping or perceived cooling – often sacrificing power – Detail Passion prioritizes real performance. A stiff, intentionally heavy interface foam minimizes energy loss through deformation and transmits oscillations almost entirely to the paint surface. This results in higher cut, stable self-rotation, and a uniform finish instead of just subjective comfort effects. Damping is targeted only where useful: the grey interface reduces vibrations with a special open-cell structure without compromising essential power transfer. Therminator+ Foams – Peak Performance for Every Application The Therminator+ pads use exclusively developed high-performance foams that maintain structure and hardness even under extreme conditions. They are thermally stable, chemically resistant, and fully regenerative. Their optimal power transfer combined with minimal vibration allows softer polishing foams without sacrificing cut, delivering unmatched comfort and improved finish across all foam types. Blue (Cutting): High cut with surprisingly good finish – ideal for heavy cutting and one-step polishing Orange (Medium/Finish): Newly developed blend for perfect balance between cut and gloss Black (Finish): Additivated foam for maximum deep gloss The blue and black foams are proven from the Therminator series. The orange foam is newly developed for Therminator+ and deliberately not comparable to previous formulations. Combined with the interface technology, especially the blue foam offers an impressive blend of cut and finish, reducing work steps. Optimal Build Height and Thermal Stability With an overall thickness of about 28mm, including an 8mm interface pad, the Therminator+ pad ensures consistent performance even under heavy load. The increased height promotes better heat distribution and prevents overheating during long polishing sessions. Center Hole for Maximum Cooling on Modern Machines A key advantage of Therminator+ pads is the integrated center hole. Especially for modern 75mm cordless polishers from Mirka, ShineMate, and Kovax with brushless motors and speeds up to 8000 RPM, it enables efficient heat dissipation. This protects both the pad and paint, significantly extending durability. Compatibility and Application Therminator+ pads are compatible with leading machines from Rupes, Flex, ShineMate, Liquid Elements, Makita, Mirka, and Kovax. Suitable for professional detailers and ambitious enthusiasts demanding top-quality pads. Made in Germany – Uncompromising Quality The interface technology has been intensively developed and perfected by Detail Passion. Fully produced in Germany under strict quality controls, resulting in a durable, high-performance pad that convinces in every situation.
Detail Passion Therminator+ Polishing Pad Action-Pack+ – Complete Set for Maximum Performance The Detail Passion Therminator+ Polishing Pad Action-Pack+ is your perfect entry into the world of high-end polishing pads. This value-packed bundle includes all three foam types – Cutting, Medium, and Finish – available for 75mm or 125mm backing plates. Tailored for modern dual-action polishers, this set delivers maximum efficiency, precise control, and a seamless polishing system from one source. Complete set of Cutting, Medium, and Finish pads Options for 75mm or 125mm backing plates Perfect for dual-action and forced rotation polishers Optimized eccentric stroke transfer Thermally stabilized high-performance foams Innovative interface pad for superior control Center hole ensures better heat dissipation even in 75mm version Attractive price advantage compared to single purchases Made in Germany Innovative Interface Pad – Maximum Power Transfer without Compromise The specially designed interface pad of the Therminator+ polishing pads follows a clear principle: maximum and low-loss transmission of the orbital movement. While many pads rely on soft structures to dampen vibrations or provide fake cooling – often resulting in noticeable power loss – Detail Passion focuses on real performance. A stiff, deliberately heavier interface foam minimizes energy losses from deformation and transfers the oscillation almost entirely to the paint surface. This results in higher cut, stable rotation, and an even finish rather than just subjective comfort effects. Targeted damping is applied only where it makes sense: The grey interface reduces vibrations via a special open-cell structure – without affecting crucial power transfer. Therminator+ Foams – Peak Performance for Every Application The Therminator+ polishing pads use exclusively developed high-performance foams that maintain their structure and hardness even under extreme conditions. They are thermally stable, chemically resistant, and fully self-regenerating. Thanks to maximum power transfer with minimal vibration, softer polishing foams can be used without sacrificing cut. This enables unprecedented comfort and significantly improved finishes across all foam types. Blue (Cutting): High cut with surprisingly good finish – ideal for heavy cutting and one-step polishing Orange (Medium/Finish): Newly developed blend for perfect balance between cut and gloss Black (Finish): Additive foam for maximum deep gloss The blue and black foams are proven from the Therminator series. The orange foam was completely newly developed for the Therminator+ series and is purposefully not comparable to previous orange foams. Combined with the interface technology, especially the blue foam delivers an impressive blend of cut and finish, reducing many work steps. Optimal Thickness and Thermal Stability With a total height of about 28mm, including an 8mm interface pad, the Therminator+ polishing pads offer ideal conditions for consistent performance even under heavy use. The increased thickness improves heat distribution and prevents overheating, even during long polishing sessions. Center Hole for Maximum Cooling on Modern Machines A key advantage of the Therminator+ polishing pads is the integrated center hole. Especially on modern 75mm cordless polishers from Mirka, ShineMate, and Kovax with brushless motors and speeds up to 8000 rpm, it enables efficient heat dissipation. This protects both the pad and paint surface, significantly extending service life. Compatibility and Application Therminator+ polishing pads are compatible with leading machines from Rupes, Flex, ShineMate, Liquid Elements, Makita, Mirka, and Kovax. They suit both professional detailers and ambitious enthusiasts who demand the best from their polishing pads – and with the Action-Pack+, you are perfectly equipped for every polishing step. Made in Germany – Quality Without Compromise Detail Passion has extensively developed and perfected the interface technology. Manufacturing takes place entirely in Germany under strict quality standards. The result is a durable, high-performance polishing pad system that convinces in every scenario.
Content: 3 Stück (€6.63* / 1 Stück)
Detail Passion 2Face+ Microfiber Towel mint The Detail Passion 2Face+ Microfiber Towel mint is an ultra-soft premium microfiber cloth perfect for versatile cleaning and care tasks on vehicles. Its supersoft fiber structure and special 2Face+ weave make it ideal for delicate surfaces both inside and outside your car. Available individually or as a 3-piece value set, it's a must-have for demanding car care enthusiasts. Available as a single cloth or 3-piece value set Ultrasoft multipurpose microfiber towel Special 2Face+ weave with reduced surface friction Dimensions: 40 x 40 cm Weight: 310 GSM Gentle on delicate surfaces Perfect for interior, leather, faux leather, and piano gloss High dirt absorption with smooth glide Premium quality for professional car care Special 2Face+ Weave for Maximum Gentle Care The unique 2Face+ structure significantly reduces friction between cloth and surface. This allows the microfiber towel to glide gently over sensitive materials, minimizing the risk of micro-scratches or abrasion marks. It’s especially beneficial on delicate surfaces like piano gloss, screens, soft-touch plastics, and leather, outperforming standard microfiber towels. Perfect for Interior, Leather and Faux Leather The Detail Passion 2Face+ was developed for areas requiring maximum material care. Ideal for cleaning and wiping down dashboards, displays, leather, faux leather, door panels, and delicate interior surfaces. It also offers versatility for general vehicle cleaning tasks. Available Individually or in 3-Pack Set Whether as a standalone premium towel or in the handy 3-pack value set, the Detail Passion 2Face+ mint microfiber cloth delivers top quality for enthusiasts and pros alike. The set is perfect for keeping dedicated towels for different zones such as interior, leather, and finishing.
Manufacturer / Responsible Person
Gtechniq Ltd, Langfurlong 2 Upper Heyford, NN7 3FA Northampton GB, info@gtechniq.com
Krüger GmbH, In der Schwarzerde 5-7 , 65549 Limburg DE, info@kmp360.de