Flex PXE 80 Cordless Mini Polisher - Tool Only, No Batteries or Accessories

Order in detailing and car care leads to faster and better results. This is where the Polish manufacturer Poka Premium excels. With polishers holders that are available as single holders, for multiple machines, and suitable for battery polishers, they set the benchmark in the scene. The holders are made of 1.5mm steel, are galvanized and powder-coated, and have protective rubber coatings on the support. Polisher Wall Mount for Battery Polishers up to 75mm Backing Plate Polisher wall mount made of 1.5mm steel with battery support Galvanized and powder-coated Small version for polishers up to 75mm backing plate (Rupes, Flex, ShineMate)

The APS FTL Plate Key Tool is a handy assistant for removing eccentric and rotary pads from the backing plate of the Flex PXE 80. This tool allows for the quick removal of both rotary and eccentric pads. Made from high-strength plastic, the tool is designed to last for years. Removes eccentric and rotary pads from the backing plate Made from durable plastic Compatible with all pads for the Flex PXE 80 mini polisher

Expand the capabilities of the Flex PXE 80 mini polisher with a range of accessories. This includes optimized backing plates from APS, designed to minimize vibration and accelerate paint defect corrections. While compatible backing plates are also available directly from Flex, APS has succeeded in significantly enhancing working comfort and reducing wear through special materials. APS Detailing Flex PXE 80 Velcro Backing Plate V2 50mm Low Vibration Low vibration backing plate for the Flex PXE Damped foam and stainless steel High-quality Velcro for a secure hold

The Flex PXE 80 mini polisher can be enhanced with a range of accessories. Included in this segment are optimized backing plates from APS that significantly reduce vibration, accelerating paint defect corrections. Although corresponding backing plates from Flex are available in similar sizes, APS has achieved a notable increase in working comfort and a reduction in wear through the use of special materials. APS Detailing Flex PXE 80 Velcro Backing Plate 75mm Low Vibration Low vibration backing plate for the Flex PXE Decoupled foam and stainless steel High-quality Velcro for secure hold

The Flex Flexible Shaft FS 140 for the PXE 80 significantly expands the application possibilities of the PXE 80, offered by the German manufacturer Flex. The Flexible Shaft comes with high-performance polishing pads in cone and cylinder shapes. These cones can also be purchased individually and in sets of 5 at Chemical-Shark.de. With the now available Hex Bit extension from APS, the operation of polishing cones and cylinders can also be directly connected to the PXE 80. Thanks to the extension, the PXE can now be used in tight spots that were previously inaccessible. The high-quality extension is machined from a single piece and accommodates the polishing cylinders and cones from Flex or any other tool with a Hex Bit adapter. APS Flex PXE 80 Extension Hex Bit FS 140: Machined and turned from high-strength aluminum The Hex Bit extension is designed and manufactured with the highest possible precision for the PXE. Unlike competitor products, there is no need for the standard rotational adapter or drive DT-P from Flex. This eliminates bothersome and therefore unsafe screw fastening; the extension adapter can be used immediately. The total length is 99.8 mm, and the adapter is made of high-strength aluminum 3206. APS Flex PXE 80 Extension Hex Bit FS 140 Rotating Hex Bit holder including drive unit for PXE 80 99.8 mm - approx. 10 cm long Material: 3026 high-strength aluminum Functional without using the rotating drive Compatible with all 1/4 Hex Bit tools Ideal for tight spots Fully compatible with Flex quick-change system Perfect for polishing cones and cylinders from Flex for FS 140

The PXE 80 by the German manufacturer has revolutionized polishing and smart repair techniques. This powerful machine can accomplish a variety of tasks thanks to its battery, quick-change system, and multiple operating modes. The extension adapter from APS significantly increases the functional range of the machine, allowing it to reach those tight spots that were previously inaccessible. This high-quality extension is precision-machined from a single piece and accommodates the backing pads BP-M 50 50mm and BP-M 30. APS Extension for Flex PXE 80: Machined and Turned from High-Strength Aluminum The extension is designed and manufactured with the utmost precision for the PXE. Unlike competitor products, there is no need for the standard rotary adapter or the DT-P drive from Flex. This eliminates cumbersome and insecure screwing; the extension adapter is ready to use immediately. The total length is 99.8 mm, and the adapter is made from high-strength aluminum 3206. APS Flex PXE 80 Rotary Extension Drive DT-P+ Rotary extension including drive unit for PXE 80 99.8 mm - about 10 cm long Material: high-strength aluminum 3026 Operable without the rotary drive Compatible with backing pads up to 50 mm Ideal for tight spaces Fully compatible with Flex quick-change system

The new Intermediate polishing pads from Detail Passion are based on the well-known technology of thermally stable or thermoresistant foam. They are designed for polishing tasks in a One Step process and for correcting paint defects on softer clearcoats like those from Tesla, Harley Davidson, Dodge, or Asian manufacturers. The blue thermal pads feature an extremely fine open cell foam structure and impress with an unprecedented balance between fast material removal and excellent finish. Accurate classification of the blue intermediate foam in the existing foam list is challenging. In many cases, the intermediate polishing pad offers the cut of the orange foam and the finish of the very soft black foam. Tests have shown that the Intermediate Therminator polishing pads achieve perfect results when processing PPF protective films. With the DP Pro Therminator polishing pad, the German manufacturer Detail Passion taps into the hype surrounding thermally stable or thermoresistant polishing pads while implementing their own ideas. The advantages of thermally stable polishing pads are clear. There is consistently controllable paint or clearcoat removal during the polishing process, as the foam does not lose its hardness due to heat. This ensures that even at higher RPMs, the pressure can be maintained without a drop in cutting performance. The cell structure is also preserved, leading to optimal cooling and minimizing compression. Based on the experience with extremely fast heavy cut polishes like 3D Car Care 510 and the universal 3D One Hybrid, Detail Passion has realized additional special properties in the polishing foam. DP Pro Therminator white - Super Heavy Cut for severe paint defects DP Pro Therminator orange - Medium Cut for One Step, All-in-One, or medium-strength polishes DP Pro Therminator maroon - Medium Polish for medium polishes and finishing DP Pro Therminator blue - Intermediate One Step, soft clear coats, wrapping preparation DP Pro Therminator black - Gloss Finish for sensitive paints or extreme gloss Super Heavy Cut to Finish: DP Pro Therminator Polishing Pads for Rotary and Random Orbital Use Unlike other polishing pads made of thermally stable foam, special attention has been paid to the cell structure and distribution of polish in the composition of the DP Pro Therminators. Despite the advantages of conventional thermal pads, the cell structure can lead to uneven or no distribution of polish during startup or spreading. This can quickly result in unwanted dry running, especially with medium-hard pads. DP Pro Therminators are optimized for large stroke random orbiters like the Rupes LHR15, ShineMate EX620, Makikato POC, Flex XFE, generating either impressively fast material removal or a high-gloss finish depending on your choice. DP Pro Therminator polishing pads can be optionally complemented with heavy cut polishing pads made of hybrid wool or microfiber or used exclusively as a complete solution.