Detail Passion Polishing Pad 75mm Therminator Medium Polish maroon Ø 75/85mm

SONAX PROFILINE PerfectFinish 4-6 – High-Performance Polish for Deep Gloss Finish The SONAX PROFILINE PerfectFinish 4-6 is a professional finish polish and hologram-free polish designed specifically for removing medium defects. With its balanced cutting performance, it is ideal for use as a 1-step polish, providing a high-gloss, hologram-free result. Finish Polish with Cut: Effectively removes medium scratches, swirls, and sanding marks (P2000 and finer) Excellent Wipe-off Behavior: Easy to polish out without streaks or residues Sealant Preparation: Perfect as a preparation for ceramic coatings like Gtechniq Crystal Serum or Nordic Pro Coatings Perfect Finish with Hologram-Free Effect As a high-quality hologram-free polish, the PerfectFinish 4-6 impresses with its fine abrasives that reliably eliminate light refractions, polishing shadows, and micro-scratches. The result is a mirror-like, deeply glossy finish – especially on dark or sensitive paints like solid black. Efficient and User-Friendly Thanks to its excellent working properties, this polish can be effortlessly polished out. The easy wipe-off behavior saves time and ensures a clean result – perfect for professional vehicle detailers and dedicated enthusiasts. Finish Polish as Ideal Base for Coatings The SONAX PROFILINE PerfectFinish is not only a finish polish but also the perfect foundation for high-quality ceramic sealants. Coatings like Gtechniq Crystal Serum or Nordic Pro Coatings adhere optimally to the smoothed, silicone-free surface and unleash their full protective power. Pad Recommendation for Best Results For maximum effect, high-quality polishing pads such as the Detail Passion Therminator Intermediate (blue) for balanced defect correction or the Therminator Finish (black) for the final high-gloss finish are recommended. Both pads are optimally matched to the properties of PerfectFinish. Safe on Solid Black with Proper Degreasing Especially on sensitive or deep black solid paints, thorough degreasing with SONAX Prepare should be done after polishing. This ensures that polish residues are reliably removed and the subsequent sealant can adhere optimally – for a streak-free, long-lasting result. Alternative Polish with More Cut If you're looking for more cutting power with lower consumption, consider the 3D One Hybrid 400 Polish. This hybrid polish offers more cut and is ideal for heavily used paints while still delivering a fine finish.

3D ACA X-TRA 520 is a groundbreaking polish designed for fine polishing and finishing tasks. Known by the shorthand name 3D 520, this polish is manufactured by 3D Products in the USA. With 3D 520, paint defect corrections following heavy cut polishing can be quickly brought to a high gloss. This water-based formula contains "Alpha Ceramic Alumina" polishing agents which allow for significantly longer working times. 3D 520 is suitable for both soft single-layer paints and hard clear coats. It is free from fillers and can be completely removed even with mild paint degreasers. Hologram-Free, Crystal Clear Finish with 3D ACA X-TRA 520 High Gloss Polish 3D 520 can be applied using both rotary and eccentric polishing methods, leaving behind a crystal clear finish that is free of holograms. Ideally, 3D 520 is used after a heavy cut or medium polish, such as the 3D ACA X-TRA 500 or a comparable polish. The polish achieves clarity quickly even after a short working time, allowing for great visibility on the paint. 3D 520 stands out due to its extended working time, as the late breakdown of polishing agents into small particles makes it user-friendly and cost-effective. Very Easy Application: 3D ACA X-TRA 520 3D 520 is water-based, solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 520 does not create dust and is easy to wipe off. It is recommended to apply 3D 520 sparingly to avoid excess. We recommend using it with softer finishing foam pads.

Detail Passion Tough 2Face is a 420gsm all-purpose microfiber towel designed for various car care applications, suitable for both interior and exterior use. The towel features two sides, as suggested by the name 2Face. One side has a high pile with long fibers, perfect for sensitive smooth surfaces like paint, piano lacquer, and similar areas. The other side is equipped with short fibers, ideal for removing excess products such as polishes, detailers, and sprays. 2Face is also particularly suitable for paintwork due to its edgeless design. The high-quality microfiber consists of 70% polyester and 30% polyamide. Detail Passion Tough 2Face Towel: The Versatile Tool for Detailing and Car Care Removes detailing sprays, waxes, polishing compounds, and sealants Polishing and achieving high gloss on chrome, glass, piano finish, etc. Waterless and/or low-water washing Use with quick detailers Available in various colors Machine washable according to the included instructions Material: 70% Polyester, 30% Polyamide