Product information "Detail Passion Therminator+ Action-Pack+ Polishing Pad Ø 75/90mm"
Detail Passion Therminator+ Action-Pack+ Polishing Pad – All Pads in One Set for Maximum Performance
The Detail Passion Therminator+ Action-Pack+ polishing pad set offers the perfect introduction to the world of high-end polishing pads. This attractively priced bundle includes all three foam variants – Cutting, Medium and Finish – optionally for 75mm or 125mm backing plates. Ideally matched to modern dual-action polishers, this set delivers maximum efficiency, perfect control and a consistent polishing system from a single source.
- Complete set consisting of Cutting, Medium and Finish polishing pads
- Available for 75mm or 125mm backing plates
- Perfect for dual-action and forced-rotation polishers
- Optimized transfer of the dual-action stroke
- Thermally stabilized high-performance foams
- Innovative interface pad for maximum control
- Center hole for improved heat dissipation, including the 75mm version
- Attractive price advantage compared with individual purchase
- Made in Germany
Innovative Interface Pad – Maximum Power Transfer Instead of Pseudo-Effects
The specially developed interface pad of the Therminator+ polishing pads follows a clear principle: maximum and low-loss transfer of the dual-action movement. While many polishing pads rely on soft structures for vibration damping or supposed cooling – often with noticeable performance losses – Detail Passion focuses on genuine performance.
A rigid, deliberately heavy interface foam minimizes energy losses caused by deformation and transfers the oscillation almost completely to the paint surface. This ensures higher material removal, stable self-rotation and an even finish instead of purely subjective comfort effects.
Targeted damping is provided only where it makes sense: The gray interface reduces vibrations through a special open-cell structure without impairing the crucial power transfer.
Therminator+ Foams – Maximum Performance for Every Application
The polishing pads in the Therminator+ series use exclusively developed high-performance foams that retain their structure and hardness even under extreme conditions. They are thermally stable, chemically resistant and fully recover their shape. Thanks to maximum power transfer combined with minimized vibration, softer polishing foams can be used selectively without risking a reduction in material removal. This enables previously unattained comfort and a significantly improved finish across all foam types.
- Blue (Cutting): High material removal with a surprisingly good finish – ideal for heavy cut and one-step applications
- Orange (Medium/Finish): Newly developed blend for the perfect balance between cut and gloss
- Black (Finish): Additive-enhanced foam for maximum depth of gloss
The blue and black foams are already known from the Therminator series and have proven their worth accordingly. The orange foam, on the other hand, was completely redeveloped for the Therminator+ series and is deliberately not comparable with the previous orange foam. In combination with the interface technology, the blue foam in particular delivers an impressive combination of cut and finish, allowing many work steps to be reduced.
Optimal Construction Height and Thermal Stability
With a total height of approx. 28mm, including the 8mm interface pad, the Therminator+ polishing pads offer ideal conditions for consistent performance even under high loads. The increased construction height ensures better heat distribution and prevents overheating, even during long polishing cycles.
Center Hole for Maximum Cooling on Modern Machines
A key advantage of the Therminator+ polishing pads is the integrated center hole. Especially on modern 75mm cordless polishers from Mirka, ShineMate and Kovax with brushless motors and speeds of up to 8000 RPM, it enables efficient heat dissipation. This protects both the polishing pad and the paint surface and significantly increases service life.
Compatibility and Application Range
The Therminator+ polishing pads are compatible with leading machines from Rupes, Flex, ShineMate, Liquid Elements, Makita, Mirka and Kovax. They are suitable for professional detailers as well as ambitious enthusiasts who have the highest demands for their polishing pad – and with the Action-Pack+, are optimally equipped for every work step right from the start.
Made in Germany – Quality Without Compromise
Detail Passion has intensively developed and perfected the interface technology. Production takes place entirely in Germany under the strictest quality standards. The result is a durable, high-performance polishing pad system that delivers outstanding results in every situation.
| Hook and loop pad diameter (mm): | 75 |
|---|---|
| Size: | 75 mm |
Application recommendation for dual-action polishers
For optimal results with the Detail Passion Therminator+ polishing pads, we recommend adjusted speeds and machine settings depending on the foam type for dual-action polishers with a stroke of 12 to 21mm. The correct setting ensures maximum performance, controlled temperature development and a consistent polishing result.
Heavy Cut (blue): Can be used at the maximum machine setting. Recommended upper limit: up to approx. 6000 RPM.
Medium (orange): Use in the low to medium speed range. Ideal for one-step polishes and defect correction with a focus on finishing. Recommended upper limit: up to approx. 4000 RPM.
Finish (black): Low to medium speed for maximum gloss and a hologram-free finish. Recommended upper limit: up to approx. 3000 RPM.
Note: Regardless of the selected setting, the temperature of the polishing pad and paint surface should be checked regularly to ensure optimal results and maximum service life. For gentle and thorough cleaning of the Therminator+ polishing pads, we recommend using the Therminator Clean polishing pad cleaner.
Login
Detail Passion Therminator+ Action-Pack+ Polishing Pad Ø 75/90mm
€19.90
Available, delivery time: 1-3 days
Product information "Detail Passion Therminator+ Action-Pack+ Polishing Pad Ø 75/90mm"
Detail Passion Therminator+ Action-Pack+ Polishing Pad – All Pads in One Set for Maximum Performance
The Detail Passion Therminator+ Action-Pack+ polishing pad set offers the perfect introduction to the world of high-end polishing pads. This attractively priced bundle includes all three foam variants – Cutting, Medium and Finish – optionally for 75mm or 125mm backing plates. Ideally matched to modern dual-action polishers, this set delivers maximum efficiency, perfect control and a consistent polishing system from a single source.
- Complete set consisting of Cutting, Medium and Finish polishing pads
- Available for 75mm or 125mm backing plates
- Perfect for dual-action and forced-rotation polishers
- Optimized transfer of the dual-action stroke
- Thermally stabilized high-performance foams
- Innovative interface pad for maximum control
- Center hole for improved heat dissipation, including the 75mm version
- Attractive price advantage compared with individual purchase
- Made in Germany
Innovative Interface Pad – Maximum Power Transfer Instead of Pseudo-Effects
The specially developed interface pad of the Therminator+ polishing pads follows a clear principle: maximum and low-loss transfer of the dual-action movement. While many polishing pads rely on soft structures for vibration damping or supposed cooling – often with noticeable performance losses – Detail Passion focuses on genuine performance.
A rigid, deliberately heavy interface foam minimizes energy losses caused by deformation and transfers the oscillation almost completely to the paint surface. This ensures higher material removal, stable self-rotation and an even finish instead of purely subjective comfort effects.
Targeted damping is provided only where it makes sense: The gray interface reduces vibrations through a special open-cell structure without impairing the crucial power transfer.
Therminator+ Foams – Maximum Performance for Every Application
The polishing pads in the Therminator+ series use exclusively developed high-performance foams that retain their structure and hardness even under extreme conditions. They are thermally stable, chemically resistant and fully recover their shape. Thanks to maximum power transfer combined with minimized vibration, softer polishing foams can be used selectively without risking a reduction in material removal. This enables previously unattained comfort and a significantly improved finish across all foam types.
- Blue (Cutting): High material removal with a surprisingly good finish – ideal for heavy cut and one-step applications
- Orange (Medium/Finish): Newly developed blend for the perfect balance between cut and gloss
- Black (Finish): Additive-enhanced foam for maximum depth of gloss
The blue and black foams are already known from the Therminator series and have proven their worth accordingly. The orange foam, on the other hand, was completely redeveloped for the Therminator+ series and is deliberately not comparable with the previous orange foam. In combination with the interface technology, the blue foam in particular delivers an impressive combination of cut and finish, allowing many work steps to be reduced.
Optimal Construction Height and Thermal Stability
With a total height of approx. 28mm, including the 8mm interface pad, the Therminator+ polishing pads offer ideal conditions for consistent performance even under high loads. The increased construction height ensures better heat distribution and prevents overheating, even during long polishing cycles.
Center Hole for Maximum Cooling on Modern Machines
A key advantage of the Therminator+ polishing pads is the integrated center hole. Especially on modern 75mm cordless polishers from Mirka, ShineMate and Kovax with brushless motors and speeds of up to 8000 RPM, it enables efficient heat dissipation. This protects both the polishing pad and the paint surface and significantly increases service life.
Compatibility and Application Range
The Therminator+ polishing pads are compatible with leading machines from Rupes, Flex, ShineMate, Liquid Elements, Makita, Mirka and Kovax. They are suitable for professional detailers as well as ambitious enthusiasts who have the highest demands for their polishing pad – and with the Action-Pack+, are optimally equipped for every work step right from the start.
Made in Germany – Quality Without Compromise
Detail Passion has intensively developed and perfected the interface technology. Production takes place entirely in Germany under the strictest quality standards. The result is a durable, high-performance polishing pad system that delivers outstanding results in every situation.
| Hook and loop pad diameter (mm): | 75 |
|---|---|
| Size: | 75 mm |
Application recommendation for dual-action polishers
For optimal results with the Detail Passion Therminator+ polishing pads, we recommend adjusted speeds and machine settings depending on the foam type for dual-action polishers with a stroke of 12 to 21mm. The correct setting ensures maximum performance, controlled temperature development and a consistent polishing result.
Heavy Cut (blue): Can be used at the maximum machine setting. Recommended upper limit: up to approx. 6000 RPM.
Medium (orange): Use in the low to medium speed range. Ideal for one-step polishes and defect correction with a focus on finishing. Recommended upper limit: up to approx. 4000 RPM.
Finish (black): Low to medium speed for maximum gloss and a hologram-free finish. Recommended upper limit: up to approx. 3000 RPM.
Note: Regardless of the selected setting, the temperature of the polishing pad and paint surface should be checked regularly to ensure optimal results and maximum service life. For gentle and thorough cleaning of the Therminator+ polishing pads, we recommend using the Therminator Clean polishing pad cleaner.
Login
Alternative products
Manufacturer / Responsible Person
Krüger GmbH, In der Schwarzerde 5-7 , 65549 Limburg DE, info@kmp360.de