Boat Care – Cleaning, Polishing, and Maintenance Products for Watercraft

3D ACA X-TRA 500 is an innovative cutting polish designed for HeavyCut and MediumCut applications. Known as 3D 500, this polish is produced by 3D Products in the USA. With 3D 500, paint defect corrections can be made in no time. The product contains advanced "Alpha Ceramic Alumina" polishing particles that allow for significantly longer working time. 3D 500 is suitable for both soft single-layer paints and hard clear coats. It is free from fillers and can be completely removed even with mild paint degreasers. High Cut and Gloss Level with 3D ACA X-TRA 500 3D 500 can be applied using rotary or eccentric machines, leaving a very glossy finish for a HeavyCut polish without hazing. Ideally, 3D 500 is used before a finishing polish such as 3D ACA X-TRA 520, 3D One Hybrid, or any comparable polish. 3D ACA 500 becomes clear after a short working time, allowing a good view of the paint surface. 3D 500 is characterized by a very long working time and is economical due to the late breaking down of the polishing particles into smaller particles. Easy to Use: 3D ACA X-TRA 500 3D 500 is solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 500 does not create dust and can be easily wiped off. It is recommended to use 3D sparingly to avoid any excess. We recommend using microfiber pads, wool pads, and hard to medium-hard foam pads with 3D. Due to its high viscosity, 3D 500 does not splash even at high RPMs.

Flex PE 2 Brushless Rotary Polisher 14-EC C 125/150 mm The Flex PE 2 Brushless Rotary Polisher 14-EC C is a no-compromise rotary polisher for pros designed for maximum paint removal and top efficiency. Unlike dual-action or forced dual-action polishers, this model features a pure rotary drive. This achieves the highest possible paint cut—perfect for heavily weathered paints, deep scratches, and intensive correction work in professional settings. Rotary polisher with pure rotary drive Maximum cut for fast and effective paint correction Perfect for pros, detailers, and paint shops Ideal for removing severe defects in multiple polishing steps Brushless high-performance motor for consistent power High torque even under load Compatible with 125 mm and 150 mm polishing pads 6 meter cable for maximum mobility The rotary drive of the Flex PE 2 guarantees direct, unfiltered power transfer to the paint, efficiently removing deep scratches, heavy oxidation, sanding marks, and paint defects. This makes it the first choice for multi-stage polishing in professional detailing and body shops. Equipped with a modern brushless motor, the Flex PE 2 delivers exceptional efficiency, long service life, and stable performance. Even under heavy pressure, the speed remains consistent—a crucial advantage for demanding correction work and tough paints. The Flex rotary polisher also impresses with its ergonomic design. Balanced weight distribution, low vibration, and precise speed control enable controlled and safe handling, even during long polishing sessions or intensive cutting steps. Thanks to the 6 meter cable length, the Flex PE 2 offers maximum freedom of movement during work. This ensures efficient workflow without constant unplugging—ideal for workshops, detailers, and professional studios. The Flex PE 2 rotary polisher set includes: FLEX PE 2 rotary polisher brushless 14-EC C 150 mm padded hook-and-loop polishing pad Manual and warranty documents 125 mm polishing pad not included but available separately to adapt the polisher for smaller surfaces and precision work. The Flex PE 2 rotary polisher is the perfect choice for users demanding maximum paint removal, uncompromising power, and professional results. It’s targeted at pros who want to efficiently eliminate severe paint defects and achieve flawless multi-stage polishing.

Flex PXE 80 Set Including Accessories Flex PXE 80 is the innovative mini polisher from German manufacturer FLEX Tools. The PXE 80 offers both rotary and random orbital modes for polishing and sanding tasks. The quick-change system allows fast swapping of drive modes and backing plates. Special microfiber and foam polishing pads from Detail Passion Padmanufaktur are specially made for the PXE 80 and listed under "Accessories" below. We stock polishes from top brands like Meguiar's, 3D Products, Sonax, Rupes, and Menzerna perfectly suited for this powerful polisher. Our expert team is happy to provide detailed advice. Why FLEX PXE 80 is the Ultimate Mini Polisher Supports rotary and free-running random orbital with 3 and 12 mm stroke Flexible and easy to use from swirl removal to hologram-free finishing with one tool Ideal complement for every detailer, painter, and spot repair professional Variable speed trigger with soft start and lock for continuous operation Speed control with 4 levels & LED indicators for clear feedback Ergonomic design with SoftGrip surfaces for versatile handling Thanks to vibration optimization, it runs incredibly smoothly Special cushioned hook-and-loop backing plates for polishing and sanding Includes bumper ring to protect vehicle surfaces Brushless motor delivers higher efficiency and longer lifespan Electronic Management System (EMS) protects the machine, extends life, and improves efficiency LED battery capacity indicator FLEX battery system compatible with all 12V battery packs Technical Specifications Max polishing pad diameter: 80 mm Max backing plate diameter: 75 mm Stroke length: 3 + 12 mm No-load speed: 400-2000 / 3000 / 4000 / 5000 RPM No-load stroke rate: 800-4000 / 6000 / 8000 / 11600 OPM Battery voltage: 12V Battery capacity options: 2.5 / 4.0 / 6.0 Ah Available FLEX PXE 80 Variants on Chemical-Shark.de Machine only without accessories 1 Flex PXE 80 mini polisher without batteries and charger Complete set including accessories, charger, case and batteries 1 Flex PXE 80 mini polisher without batteries and charger 1 Rotary adapter DT-P 1 Random orbital adapter 3 mm stroke DT-XF3 1 Random orbital adapter 12 mm stroke DT-XF12 1 Adhesive backing plate 30 mm BP-M/SR D30 PXE 1 Hook-and-loop backing plate 30 mm BP-M D30 PXE 1 Hook-and-loop backing plate 75 mm BP-M D75 PXE 2 Batteries 2.5 Ah AP 12/2.5 1 Charger CA 12/18.0 1 Transport case L-BOXX® 136 1 Case insert Note according to German Battery Act (BattG): Batteries must not be disposed of with household waste. End users are legally obliged to return used batteries. Returns are free of charge at municipal collection points or retailers. Battery type: Lithium-ion

Flex XFE 2 15 Rotary Polisher Brushless 14-EC C 125/150 mm The Flex XFE 2 15 Rotary Polisher Brushless 14-EC C is the latest generation of powerful rotary polishers from Flex. Compared to its predecessor, this model has been significantly enhanced in key areas. The new brushless high-performance motor delivers more power, runs more efficiently, and ensures consistent high performance even under demanding polishing tasks. The 15 mm orbit guarantees high material removal with an excellent finish. 15 mm orbit for efficient paint correction and flawless finish Significantly increased motor power compared to previous model New ergonomic design for maximum control Latest generation brushless motor for efficiency and durability Optimized cooling system at the polishing pad reduces heat buildup 6-meter cable length for greater freedom of movement Free-spinning rotor ensures hologram-free paint surfaces Ideal for beginners and professionals alike Perfect for dealerships, detailing shops, and professional car care The noticeably higher motor power results from cutting-edge motor technology combined with the perfectly tuned 15 mm orbit. This combo delivers stronger torque, stable RPMs under load, and a uniform polishing result — ideal for professional use and effective hologram-free paint correction. Ergonomics also set new standards with the XFE 2 15: the newly developed design fits perfectly in the hand, reduces fatigue, and provides precise control. Especially during long polishing sessions with the powerful 15 mm orbit, users benefit from smooth, controlled operation. Another highlight is the optimized cooling system right at the polishing pad. This innovation effectively dissipates heat from the backing plate, pad, and paint surface. The result is longer working intervals, less thermal stress, and significantly better material protection — even during intensive polishing runs. For maximum practicality in professional daily use, the cable length was extended to 6 meters. This provides much more freedom of movement, reduces plug changes, and enables a smooth and efficient workflow in workshops, dealerships, or detailing studios. The scope of delivery for the Flex XFE 2 15 brushless 14-EC C is optimized for professional use and includes all essential components for immediate start: FLEX XFE 2 Polisher with 15 mm orbit Hex key for polishing pad change 150 mm polishing pad Manual and warranty conditions Not included is the 125 mm polishing pad, which can be purchased separately to adapt the machine to smaller areas or specific polishing tasks. The Flex XFE 2 15 brushless 14-EC C is the perfect choice for dealerships, professional detailers, and car care companies seeking a powerful rotary polisher with 15 mm orbit, excellent ergonomics, and uncompromising hologram-free results.

Gtechniq Bug Remover W8v2 has been newly developed to effectively remove stubborn fly and insect residues. It is also suitable for breaking down persistent bird droppings. Bird droppings, fly, and insect residues are among the most challenging contaminants that can occur on vehicles. The hard chitin shells combined with fats, droppings, and proteins quickly form tough crusts on the vehicle's surface. With the added heat or sunlight, strong attachments and a dangerous pH level can develop rapidly. The W8v2 is unique as an insect and bug remover because it is 100% biodegradable. The modern formula allows for the removal of insect residues without relying on aggressive caustic ingredients. Please note that the new version has a pH level of 13 and is not suitable for waxed vehicles. Easily removes insect residues 100% biodegradable Safe in combination with all Gtechniq sealants New reinforced version also suitable for untreated paints

Gtechniq Bug Remover W8v2 has been newly developed to effectively remove stubborn fly and insect residues. It is also suitable for loosening tough bird droppings. Bird droppings, flies, and insect remnants are among the most difficult contaminants found on vehicles. The hard chitin shells combined with fats, droppings, and proteins quickly form tough crusts on the vehicle surface. When combined with heat or sunlight, strong adhesions and a hazardous pH level can develop quickly. W8v2 is unique as an insect and bug remover, as the cleaner is 100% biodegradable. The modern formula allows for the removal of insect residues without relying on aggressive caustic ingredients. Please note that the new version has a pH level of 13 and is not suitable for waxed vehicles. Easily removes insect residues 100% biodegradable Safe in combination with all Gtechniq sealants New, reinforced version also suitable for untreated paints

Gtechniq Bug Remover W8v2 has been newly developed to remove even stubborn fly and insect residues. It is also suitable for loosening stubborn bird droppings. Bird droppings, flies, and insect residues are among the most difficult contaminants to remove from vehicles. The hard chitin shells combined with fats, excrement, and proteins quickly form tough crusts on the vehicle surface. When combined with heat or sunlight, strong adhesions and a dangerous pH value can quickly develop. W8v2 is unique as an insect and mosquito remover, as the cleaner is 100% biodegradable. The modern formula allows for the removal of insect residues without relying on aggressive caustic ingredients. Note that the new version has a pH value of 13 and is not suitable for waxed vehicles. Effortlessly removes insect residues 100% biodegradable Safe in combination with all Gtechniq coatings New enhanced version also suitable for untreated paints

Ceramic Top offers unparalleled dirt repulsion, shine, and surface smoothness for boats, watercraft, and other vehicles with gelcoats. It features an exceptionally strong anti-static function that helps keep surfaces dust-free, and contains a powerful UV filter to prevent premature fading. Ceramic Top forms a permanent chemical bond with the paint or the applied Gtechniq Marine Base Coat, thus providing lasting surface protection. This product is part of the new Gtechniq Marine Series for boats, private yachts, and watercraft. Unmatched dirt repulsion, shine, and surface smoothness Strong anti-static function keeps the surface dust-free Powerful UV filter prevents premature fading Suitable for boats, watercraft, and other vehicles with gelcoats Please refer to the processing and application instructions in the Application tab on this page (see below).

Ceramic Base is a high-strength protective coating that is extremely hard and remarkably durable. It prevents scratches and holograms that can occur through cleaning and everyday use on vehicles with gelcoats. Ceramic Coat forms a permanent, chemical bond with the gelcoat and significantly enhances the gloss level and paint smoothness. This product is part of the new Gtechniq Marine Series for boats, private yachts, and water sports vehicles. High-strength protective coating for boats, yachts, water sports vehicles, and gelcoats Protection against scratches from daily use and cleaning Very high, rich gloss Please refer to the processing and application instructions in the Application tab on this page (see below).

Gtechniq Bug Remover W8v2 wurde neu entwickelt, um auch stark festsitzende Fliegen- und Insektenreste zu entfernen. Es eignet sich auch zum Anlösen von hartnäckigem Vogelkot. Vogelkot, Fliegen- und Insektenreste zählen zu den am schwierigsten zu entfernenden Verschmutzungen, die an Fahrzeugen auftreten können. Die harten Chitinpanzer kombiniert mit Fetten, Kot und Eiweißen legen sich schnell mit harten Verkrustungen auf die Fahrzeugoberfläche. In Kombination mit Abwärme oder Sonneneinstrahlung entstehen schnell starke Anhaftungen und ein gefährlicher pH-Wert. W8v2 ist als Insekten- und Mückenlöser auch daher einmalig, da der Reiniger 100% biologisch abbaubar ist. Die moderne Formel ermöglicht das Entfernen von Insektenresten, ohne auf aggressive ätzende Inhaltsstoffe angewiesen zu sein. Beachten Sie, dass die neue Version einen pH-Wert von 13 hat und nicht für gewachste Fahrzeug geeignet ist. Entfernt mühelos Insektenreste 100% biologisch abbaubar Sicher in Kombination mit allen Gtechniq Versiegelungen Neue, verstärkte Version auch für unbehandelte Lacke geeignet

Ceramic Base is a high-strength protective coating that is extremely tough and exceptionally durable. It prevents scratches and holograms that can occur from cleaning and the everyday use of vehicles with gelcoats. Ceramic Coat forms a permanent chemical bond with the gelcoat, significantly enhancing gloss and smoothness. The product is part of the new Gtechniq Marine Series for boats, private yachts, and watercraft. High-strength protective coating for boats, yachts, watercraft, gelcoats Protection against scratches from everyday use and cleaning Very high intense gloss Please refer to the processing and application instructions in the Application tab on this page (see below).

Ceramic Top delivers unparalleled dirt repellency, gloss, and surface smoothness for boats, watercraft, and other vehicles with gelcoats. It features an exceptionally strong antistatic function, helping to keep surfaces dust-free, and contains a powerful UV filter to prevent premature fading. Ceramic Top forms a permanent chemical bond with the paint or the applied Gtechniq Marine Base Coat, thus providing sustainable surface protection. This product is part of the new Gtechniq Marine Series for boats, private yachts, and watercraft. Unparalleled dirt repellency, gloss, and surface smoothness Strong antistatic function keeps the surface dust-free Powerful UV filter prevents premature fading Suitable for boats, watercraft, and other vehicles with gelcoats Please refer to the processing and application instructions in the application tab on this page (see below).

Gtechniq Marine Glass Polish is a water-based cleaner designed for glass and plexiglass. It features nano abrasives and citric acid to achieve a scratch-free finish. This high-performance polish effectively removes dirt and contaminants. It eliminates water spots and unwanted discoloration, leaving a crystal-clear shine and a clinically clean finish. This product is part of the new Gtechniq Marine series for boats, private yachts, and water sports vehicles. Cleaning polish for glass, plexiglass, and polycarbonate Crystal-clear shine and clean finish Ideal for marine applications

Gtechniq Marine Interior Cleaner cleans in three ways. First, it contains a safe, water-based degreaser and surfactant that removes dirt and grease from any surface. Second, it includes an additive that absorbs and neutralizes odor-causing substances. Third, it features a strong antibacterial component that sustainably prevents new dirt. Gtechniq Marine Interior Cleaner can be used on any surface, including leather, Alcantara, and synthetic or natural fibers. This product is part of the new Gtechniq Marine series for boats, luxury yachts, and watercraft. Intensive cleaner for boating and water sports applications Safe to use on all surfaces Cleaning, antibacterial, and caring

Gtechniq Marine Metal Restoration Polish brings a deep shine to any metal safely and easily. It can be used on steel, brass, copper, aluminum, gold, silver, and other precious metals. Since the polish contains no ammonia, harsh chemicals, or aggressive abrasives, it delivers a flawless, immaculate finish with every use. This product is part of the new Gtechniq Marine Series for boats, luxury yachts, and watercraft. Brilliant shine Flawless finish without scratches Easy to work with

Gtechniq Marine UV Wash is a powerful shampoo designed for use with ceramic sealants, coatings, and waxes on boats and watercraft. True to its name, this shampoo contains efficient UV-absorbing additives. Hydroxyphenyl-Triazine (HPT) remains water-resistant on treated surfaces after cleaning, protecting them from weathering and UV damage.Highly Effective & 100% Biodegradable: Gtechniq Marine UV WashMarine UV Wash is 100% biodegradable. It breaks the bond between dirt and boat surfaces, encapsulates dirt particles, and reduces surface scratches. It also maximizes surface gloss and leaves a smooth paint finish.Gtechniq Marine is a specialized product line for boats, watercraft, and private aircraft, optimized for materials like gelcoat common in these applications.

Gtechniq Tar and Glue Remover W7 gently dissolves tar and adhesive, allowing for safe removal without damaging paint or coatings. W7 is formulated with modern solvents and is compatible with Gtechniq’s line of ceramic and spray coatings. It's also excellent for removing tree sap.Remover for tar, tree sap, and adhesivessafe for application on paint and coated surfacesenables highly effective, economical usage

Gtechniq Water Spot Remover W9 is a concentrated liquid designed specifically to remove water spots and limescale, fully compatible with existing ceramic coatings from Gtechniq. Unlike typical limescale removers, W9 operates on a three-stage action concept: Dissolving and removing salts Capturing metal ions typically found in tap water Eliminating silica deposits, such as diatomaceous earth and scale Especially tough water spots and silica deposits present a significant challenge, but with W9, they can be removed effortlessly. The formula is also particularly effective on glass, where water spots are notoriously difficult to remove. W9 is suitable for all paint types, including effect and matte finishes. removes water spots and limescale safe for use on coatings can be used on all paint types, plastic, and plastic parts

Gtechniq Water Spot Remover W9 is a concentrated liquid designed to remove water spots and limescale, fully compatible with existing Gtechniq ceramic coatings. Unlike regular limescale removers, W9 employs a three-stage action concept: Dissolving and removing salts Capturing metal ions commonly found in tap water Eliminating silica deposits, such as diatomaceous earth and scale Particularly tough water spots and silica deposits can be a challenge, but with W9, you can remove them effortlessly. The formula is also highly effective on glass, where water spots are notoriously difficult to eliminate. W9 is suitable for all paint types, including effect and matte finishes. removes water and limescale spots safe to use on coatings usable on all paint types, plastics, and plastic parts

NORDIC Pro Coatings GRAPHENE [GX] v2 – High-Performance Hybrid Graphene Ceramic Coating NORDIC Pro Coatings GRAPHENE [GX] v2 is the advanced evolution of the proven GX formula, designed for car care enthusiasts, private users, and professional detailers seeking maximum performance combined with ease of use. This modern ceramic coating harnesses cutting-edge graphene and polymer technology to deliver enhanced smoothness, extreme deep gloss, and significantly improved dirt and water repellency. NORDIC Pro Coatings GRAPHENE [GX] v2 Ceramic Coating Set The v2 version takes the popular GX coating's performance to the next level, showing noticeable improvements in all key vehicle detailing areas. Significantly increased hydrophobicity and dirt repellency – especially effective against organic contaminants like oils, proteins, and road grime Noticeably smoother surface – felt by touch and clearly visible during washing Extreme chemical resistance – withstands strong alkaline pre-cleaners, acidic wheel cleaners, and tar removers Outstanding coverage and deep gloss – thick layer for intense optical enhancement State-of-the-art polymer and nano-graphene technology – ensures maximum durability and performance User-friendly application – perfect for enthusiasts, private users, and professionals Versatile use – suitable for paint, plastics, carbon parts, wheels, and unpainted plastic components Durability with proper care: up to 4 years or 80,000 km (longer lifespan possible with careful maintenance) Available sizes: 10 ml (without set) and 30 ml or 50 ml sets including applicator and protective gloves Max Smoothness, Protection & Performance – Now in v2 GRAPHENE [GX] v2 was specifically developed to meet modern car care demands even better. The surface offers exceptional smoothness that not only feels premium but also significantly eases car washing. Water, dirt, and stubborn organic residues adhere less and are removed more efficiently. Enhanced chemical resistance makes this coating extremely durable against aggressive cleaners. Whether strong alkaline pre-cleaners, acidic wheel cleaners, or tar removers, GRAPHENE [GX] v2 remains stable and reliably protects surfaces from UV rays, road salt, and environmental pollutants. Another highlight of the v2 version is improved coverage with a richer deep gloss. The increased layer thickness delivers a noticeably richer paint finish and boosts color depth sustainably. Despite enhanced performance, application remains user-friendly and works on clear coats, plastics, carbon, wheels, and unpainted plastic surfaces. GRAPHENE [GX] v2 is not suitable for matte paints or matte wraps; GRAPHENE [60] is recommended for those surfaces. With correct care, the coating lasts up to 4 years or approximately 80,000 kilometers, with longer durability possible through meticulous maintenance. This offers an ideal blend of performance, optics, and everyday practicality. Differences Between NORDIC Pro Coatings GRAPHENE [60] and GRAPHENE [GX] v2 Target user: GRAPHENE [60] is exclusively for professional users; GRAPHENE [GX] v2 targets private users, enthusiasts, and professional detailers alike. Paint smoothness: GRAPHENE [GX] v2 delivers even stronger, highly tactile smoothness. Matte paint compatibility: GRAPHENE [60] works on matte paints and matte wraps (testing recommended). GRAPHENE [GX] v2 is not compatible with matte surfaces. NORDIC Pro Coatings products are PFAS-free and REACH-compliant, meaning they contain no environmentally persistent fluorinated compounds and meet the strict European Chemicals Regulation REACH. This ensures safe use, health safety, and a responsible choice for the environment and sustainability.

NORDIC Pro Coatings GRAPHENE [GX] v2 – High-Performance Hybrid Graphene Ceramic CoatingNORDIC Pro Coatings GRAPHENE [GX] v2 is the advanced evolution of the proven GX formula, designed for car care enthusiasts, private users, and professional detailers who demand maximum performance with ease of use. This modern ceramic coating combines cutting-edge graphene and polymer technology to deliver enhanced smoothness, extreme deep gloss, and significantly improved dirt and water repellency.GRAPHENE [GX] v2 Ceramic Coating SetThe v2 version elevates the popular GX coating’s performance to a new level with noticeable improvements across all critical car care aspects.Significantly boosted hydrophobicity and dirt resistance – especially effective against organic contaminants like oils, proteins, and road grimeNoticeably smoother surface – tactile and during washingExtreme chemical resistance – withstands strong alkaline pre-cleaners, acidic cleaners, and tar removersThick coverage and deep gloss – high film build for intense optical enhancementAdvanced polymer and nano-graphene technology – for maximum durability and performanceUser-friendly application – ideal for enthusiasts, private users, and professionalsVersatile use – suitable for paint, plastics, carbon parts, rims, and unpainted plasticsDurability with proper care: up to 4 years or 80,000 km (longer lifespan likely with thorough maintenance)Available sizes: 10 ml (no set), 30 ml, or 50 ml including applicator and protective glovesMaximum Smoothness, Protection & Performance – Now in v2GRAPHENE [GX] v2 was specifically enhanced to meet modern car care demands. The surface offers extreme smoothness that impresses both to the touch and during washing. Water, dirt, and stubborn organic residues adhere much less and are removed more efficiently.Improved chemical resistance makes the coating highly resilient against aggressive cleaners. Whether strong alkaline pre-cleaners, acidic wheel cleaners, or tar removers, GRAPHENE [GX] v2 remains stable and reliably protects against UV rays, road salt, and environmental pollutants.Another highlight of the v2 is the improved coverage with noticeably deeper gloss. The added layer thickness creates a visibly richer paint look and sustainably intensifies color depth.Application remains user-friendly despite the performance boost and is suitable on clear coats, plastics, carbon, rims, and unpainted plastic surfaces. GRAPHENE [GX] v2 is not recommended for matte paints or matte wraps; in these cases, use GRAPHENE [60].With proper care, the coating offers durability up to 4 years or approximately 80,000 km, with potential for longer protection. It perfectly combines performance, visual appeal, and everyday usability.Differences Between NORDIC Pro Coatings GRAPHENE [60] and GRAPHENE [GX] v2Target Audience: GRAPHENE [60] is exclusively for commercial users. GRAPHENE [GX] v2 targets private users, enthusiasts, and professional detailers alike.Paint Smoothness: GRAPHENE [GX] v2 offers enhanced, intensely smooth finish with a pleasant tactile feel.Matte Paint Compatibility: GRAPHENE [60] can be used on matte paints and matte wraps (testing recommended). GRAPHENE [GX] v2 is not suitable for matte surfaces.Products from NORDIC Pro Coatings are PFAS-free and REACH-compliant, meaning they contain no persistent harmful fluorine compounds and meet strict EU chemical regulations. This ensures safe use, health safety, and a responsible choice for environment and sustainability.

Optimum No Rinse (ONR) Version 6 Wash & Shine is the latest generation of the proven car wash concentrate for cleaning without a hose – ideal for garage washing, washing without water, and rinse-free car washing. The revamped polymer formula encapsulates dirt particles even more effectively and protects sensitive paint surfaces from micro-scratches. Perfect for cars, motorcycles, boats, or airplanes. Rinseless Car Wash: How ONR V6 Works Originally developed for regions with water restrictions like California, ONR allows a complete vehicle wash with minimal water use – no rinsing required. The principle: Multiple microfiber towels or wash mitts are soaked in an ONR solution, and the vehicle is cleaned section by section. Then it is dried – also without a hose. For better cleaning on tougher dirt, ONR can also be used as a pre-spray. Waterless vs. Rinseless Car Wash – The Difference In rinseless washing like with ONR, water is used – but without rinsing. The application is done with one or two wash buckets and several towels or wash mitts. Waterless washing, on the other hand, only uses spray cleaners and towels – entirely without buckets. ONR is primarily suitable for rinseless methods. For heavy dirt, a classic hand wash with pre-cleaning, foam, and high pressure is still recommended. For moderate dirt, ONR V6 is ideal, and light contamination can be removed waterless. Benefits of Optimum No Rinse Version 6 The new formula offers noticeably better glide properties, even more shine, and a smoother drying feel. ONR V6 leaves a clean, smooth surface and ensures that dirt is increasingly easier to remove with repeated use. Especially recommended for enthusiasts with sealed or ceramic-coated vehicles. Versatile Applications: Not Just for Paint ONR V6 is a real all-rounder: It works not only as a shampoo for rinse-free vehicle washing but also as a lubricant for clay bars, interior cleaner, or glass cleaner – suitable even for Plexiglass or Makrolon. The formula is alcohol-free and protects sensitive materials, such as those used in aviation or boating. Differences Between ONR Version 5 and Version 6 Compared to the previous version, ONR V6 has been developed in several aspects. The glide ability ('Lubricity') is significantly improved – the microfiber cloth glides noticeably easier over the paint. Users report a more intense shine and smoother finish when drying. The new polymer formula optimizes dirt binding and ensures that the vehicle is cleaned more effectively with less water usage. For fans of rinseless washing, Version 6 is a clear upgrade to ONR V5. Rinse-free washing: Ideal for garages, winter use, or areas with water restrictions Washing without water: Reduces water consumption to a minimum Suitable for paint, glass, plastic, Plexiglass, Makrolon, and more High glide properties – minimizes scratch risk during washing Visibly more shine and smoothness with every application Available in various sizes: 236 ml, 946 ml, 3.78 l Tip: For best results, we recommend using soft water to avoid limescale stains and maximize polymer performance.

P&S Iron Buster is a highly effective fallout remover and wheel cleaner. With P&S Brake Buster, the family-owned company has been producing an alkaline tire and wheel cleaner for many years, and now the product range is complemented by a pH-neutral, acid-free remover for iron particles. P&S Iron Buster is part of the Double Black Collection and was developed with detailing legend Renny Doyle. Fallout and Iron Particles: Here's How to Remove These Paint Enemies and Gloss Destroyers! Even if the paint looks clean and the vehicle shows no dirt, there is a high probability that fallout and iron particles have settled on the surface. During every wash, particularly in automatic washes, there is a risk that these iron particles will be picked up during cleaning and cause scratches on the paint. A complete destruction of ceramic coatings and other paint seals is possible. With Iron Buster, fallout and iron particles can be removed as easily as securely. Color Change Indicator from Gold to Purple-Red Signals Iron Particles Reliably! Iron Buster has a golden-yellow color. The product is ready to use but can also be diluted. Once Iron Buster is sprayed on, it begins to dissolve iron particles and fallout from the vehicle's surface, indicating this with a color change to purple-red. Iron Buster can thus also be used as an indicator if you are unsure whether fallout is present. Chemical-Shark.de Recommendation: Check for Fallout Every 2 Months! We recommend testing for fallout every 2 months for a daily driven vehicle. Our application guide explains the procedure.

P&S Iron Buster is a highly effective iron remover and wheel cleaner. The family-owned company has been producing an alkaline tire and wheel cleaner with P&S Brake Buster for many years, and now the product range is complemented by a pH-neutral and acid-free remover for iron particles. P&S Iron Buster is part of the Double Black Collection and was developed in collaboration with detailing legend Renny Doyle. Remove Rail Dust and Iron Particles: Protect Your Paint! Even if the paint looks clean and the vehicle shows no visible dirt, there is a high probability that rail dust and iron particles have settled on the surface. With every car wash, especially in automatic wash systems, there is a risk that these iron particles are picked up during cleaning, causing scratches on the paint. Complete destruction of ceramic coatings and other paint sealants is possible. With Iron Buster, rail dust and iron particles can be removed easily and safely. Color Indicator from Gold to Purple-Red Shows Iron Particles! Iron Buster has a golden yellow color. The product is ready to use but can also be diluted. Once Iron Buster is sprayed on, it begins to dissolve iron particles and rail dust from the vehicle surface, indicating this by changing color to purple-red. Iron Buster can thus also be used as an indicator if you are unsure whether rail dust is present. Chemical-Shark.de Recommendation: Check for Rail Dust Every 2 Months! We recommend checking for rail dust particles every 2 months for daily-driven vehicles. Our application guide explains the procedure.

The original Petzoldt's MAGIC-Clean clay bar® is a well-established term in modern car care for the gentle cleaning of paint surfaces before polishing or waxing. To get straight to the point, we always recommend performing at least one polishing step with a medium polish after using the clay bar. With the MAGIC-Clean clay, you can remove paint mist, color mist, industrial deposits, rust particles, dried tree sap, insect residue, tar, and deposits from acid rain, hard water stains, brake dust, and iron particles. Optimized Polishing Results through Deep Cleaning Before Polishing For a perfect polishing result, it is essential to thoroughly pre-clean the paint. Deep cleaning is safely achievable using MAGIC-Clean clay in combination with a paint cleaner that provides good cleaning performance and gliding properties. For Petzoldt's clay bar, we recommend the Paint Gloss cleaner by P&S, Optimum No Rinse wash & shine, or CarPro Ech2O. Conventional cleaners or car shampoos are unsuitable as paint cleaners in combination with clay, as they can leave a film on the surface. Powerful Against Stubborn Contaminations - Petzoldt's Red MAGIC-Clean Clay Bar Petzoldt's MAGIC-Clean clay is available in several abrasiveness levels. The blue MAGIC-Clean is ideal for medium contamination and paint deposits, while the red variant is sharper and harder, and the white variant is specifically designed for highly sensitive paints. The Red MAGIC-Clean Clay Bar from Petzoldt's High-quality hard (sharp) clay for medium attachments Ideal for deep paint cleaning Original Petzoldt's MAGIC-Clean Perfect in combination with P&S Paint Gloss, Optimum No Rinse, and CarPro Ech2O as a lubricant Gentle cleaning of deposits, insect residues, hard water stains, tar, etc. Follow application recommendations Available in 100g or 200g packs

In modern car detailing is the original Petzoldt's MAGIC-Clean Detailing Clay® a renowned term for gentle cleaning of paint surfaces before polishing or applying waxes. To get straight to the point, we always recommend performing at least one polishing step with a medium polish after using detailing clay. With the MAGIC-Clean Detailing Clay, you can effectively remove paint overspray, color spray, industrial deposits, surface rust, dried tree sap, insect residues, tar, and deposits from acid rain, limescale, brake dust, and iron particles. Optimized Polishing Results Through Deep Cleaning Before Polishing To achieve perfect polishing results, it is essential to pre-clean the paint intensively. Deep cleaning is safely achievable with the MAGIC-Clean Detailing Clay in combination with a paint cleaner that provides good cleaning power and glide. For Petzoldt's clay, we recommend the Paint Gloss from P&S, Optimum No Rinse Wash & Shine, or CarPro Ech2O. Conventional cleaners or car shampoos are unsuitable as paint cleaners in conjunction with detailing clay, as they can leave a greasy film. Gentle Yet Powerful - MAGIC-Clean Detailing Clay Blue from Petzoldt's Petzoldt's MAGIC-Clean Detailing Clay is available in several abrasiveness levels. The blue MAGIC-Clean is ideal for moderate dirt and paint deposits, while the red variant is sharper and harder, and the white variant is specially developed for highly sensitive paint surfaces. The Blue MAGIC-Clean Detailing Clay from Petzoldt's High-quality medium detailing clay for moderate attachments Ideal for deep paint cleaning Original Petzoldt's MAGIC-Clean Perfectly paired with P&S Paint Gloss, Optimum No Rinse, and CarPro Ech2O as a glide aid Gentle cleaning of deposits, insect residues, limescale, tar, etc. Follow application recommendations Available in 100g or 200g packs in a box

In modern car care, the original Petzoldt's MAGIC-Clean Cleaning Clay® is a well-known term for the gentle cleaning of paints before polishing or applying waxes. To put it upfront, we always recommend at least one polishing step with a medium polish after using cleaning clay. With the MAGIC-Clean Cleaning Clay, you can remove paint mist, color mist, industrial deposits, surface rust, dried tree sap, insect residues, tar, and residues from acid rain, lime spots, brake dust, and iron particles. Optimized Polishing Results Through Deep Cleaning Before Polishing To achieve a perfect polishing result, it's essential to thoroughly pre-clean the paint. Deep cleaning is possible with the MAGIC-Clean Cleaning Clay in combination with a paint cleaner that offers good cleaning performance and glide. For Petzoldt's cleaning clay, we recommend the Paint Gloss cleaner from P&S, Optimum No Rinse wash & shine, or CarPro Ech2O. Conventional cleaners or car shampoos are unsuitable as paint cleaners in conjunction with cleaning clay, as they can leave a lubricating film. Mild, Ideal for Sensitive Paints - MAGIC-Clean Cleaning Clay White from Petzoldt's Petzoldt's MAGIC-Clean Cleaning Clay is available in several abrasiveness levels. The blue MAGIC-Clean is ideal for medium dirt and paint deposits; the red variant is sharper and harder, while the white version is specifically designed for highly sensitive paints. The Blue MAGIC-Clean Cleaning Clay from Petzoldt's Mild cleaning clay for sensitive paints (uni black, classic cars, paints without clear coat) Ideal for deep paint cleaning Original Petzoldt's MAGIC-Clean Ideal in combination with P&S Paint Gloss, Optimum No Rinse, and CarPro Ech2O as a lubricant Gentle cleaning of deposits, insect residues, lime spots, tar, etc. Follow application recommendations 100g pack in box

The Rupes Wool Polishing Pad is specifically designed for working on gelcoats and buffing paint on boats, watercraft, and aircraft. It is meant for rotary processing with machines like the Rupes LH19E or Flex PE 14-2. Made entirely from premium lambswool! 100% natural lambswool without synthetic additives Extremely abrasive for rotary polishers like Rupes LH19 and Flex PE 14-2 150mm hook-and-loop attachment with damping layer Ideal for heavily weathered paints, gelcoats, and buffing paints Fiber length of 35mm for optimal cooling Dyed blue-white and steam-treated, thus no color bleeding Perfect for HeavyCut polishes like Rupes XC-1, 3D ACA 510, 3D ACA 500

Rupes XC-2 XTRA CUT COMPOUND is universally compatible with all machine movements, including dual-action and rotary polishers. This new formula is specifically designed for the quick removal of defects on gelcoat and other high-solid industrial paints, countertops, hard coatings, and in the aerospace industry. The newly developed XC-2 polish replaces the existing XC-1 with a host of benefits. Faster defect removal Improved finish and optimized clarity Superior performance on hard surfaces Better emulsion for easy wiping Water-based formula White color

RUPES Marine XC-100 Extra Cut – High-Performance Polish for Gelcoat, Boat & Aircraft Paints The RUPES Marine XC-100 Extra Cut polishing compound is a powerful 1-step heavy-cut polish designed to quickly remove severe defects on gelcoat, boat paint, and painted aircraft surfaces. Engineered for maximum cutting power with controlled finishing, it’s ideal for heavily weathered surfaces, oxidation, scratches, and sanding marks. As the 1st step polish in the new RUPES Gelcoat & Marine Program, it lays the foundation for professional and systematic detailing. Extreme cutting power for heavily weathered gelcoat and paint surfaces Effective removal of oxidation, scratches, and sanding marks Optimized for boat paint, gelcoat, and aircraft coatings Suitable for rotary and dual-action polishers Part of the structured RUPES Marine polishing system Perfect Start to the RUPES Marine Polishing System The XC-100 is the first step in the newly developed RUPES Gelcoat and Marine Program, tailored to the unique demands of marine and aviation coatings. The system features perfectly matched polishes for maximum efficiency and flawless results: MARINE XC-100 | EXTRA-CUT POLISH COMPOUND MARINE XC-300 | FAST-CUT POLISH COMPOUND MARINE XF-500 | FINE SANDING POLISH MARINE XF-600 | ULTRA-FINE POLISH Maximum Performance on Gelcoat and Specialty Paints Especially on heavily stressed surfaces like boats or aircraft, superior defect correction is essential. The XC-100 impresses with high removal rate combined with efficient handling. It reduces polishing steps and saves valuable time – perfect for professional detailers, shipyards, and aircraft detailing. Optimal Pad Combo for Best Results For maximum cut and control, using premium polishing pads is recommended. The XC-100 works especially effectively with: Detail Passion Therminator Microwool Pad Detail Passion Hybrid Wool Pad Detail Passion Therminator Heavy Cut White Pad The polish is suitable for both rotary and dual-action polishers, offering excellent balance between cut and control in either application. Efficiency and Control for Pro Use The special formula ensures a consistent polishing pattern while minimizing dust and residue, making cleanup easier and streamlining workflow. Less effort, maximum results – ideal for demanding marine and aviation applications.

RUPES Marine XC-300 Fast Cut – Powerful Polish for Gelcoat, Boat & Aircraft Paint The RUPES Marine XC-300 Fast Cut Polish is your go-to for fast, effective removal of medium defects on gelcoat, boat paint, and aircraft surfaces. Designed for pros who demand quick, reliable correction with a clean finish, it strikes the perfect balance between cutting power and gloss. Ideal for lightly weathered surfaces and professional rapid detailing. Efficiently removes medium scratches, oxidation & wear marks Optimized for gelcoat, boat, and aircraft paints Fast results with balanced cut-to-finish ratio Suitable for rotary and dual-action polishers Perfect for time-saving polishing workflows Part of the RUPES Gelcoat & Marine Polishing System XC-300 is a key component of the RUPES Gelcoat and Marine lineup, complementing the heavy-cut XC-100 for quicker correction of moderate defects. This system enables a structured, efficient workflow: MARINE XC-100 | EXTRA-CUT POLISH MARINE XC-300 | FAST-CUT POLISH MARINE XF-500 | FINE CUT POLISH MARINE XF-600 | ULTRA-FINE POLISH Fast Defect Removal with Impressive Finish Designed specifically for users prioritizing efficiency and time savings, XC-300 reliably removes typical wear, light oxidation, and medium scratches, delivering a significantly enhanced surface finish—often reducing the need for additional polishing steps. Optimal Pad Pairing for Maximum Results For best performance, pair with compatible polishing pads: Detail Passion Hybrid Wool Pad Detail Passion Therminator Medium Cut Orange Pad Detail Passion Therminator Heavy Cut White Pad Works flawlessly with both rotary and dual-action polishers, ensuring excellent control and consistent results. Efficient Workflow & Clean Processing Thanks to its advanced formula, XC-300 offers low residue and easy wipe-off, improving work efficiency. Perfect for larger surfaces like boats or aircraft, it’s built for professionals seeking fast, repeatable outcomes.

RUPES Marine XF-500 Fine Polish – Perfect Finish for Gelcoat, Boat Paint & AircraftThe RUPES Marine XF-500 Fine Polish is a premium fine-cut polish designed to refine gelcoat, boat paint, and painted aircraft surfaces. It’s engineered to deliver a uniform, glossy finish after initial polishing steps, effectively removing fine defects, holograms, and light sanding marks. Especially effective on white and light-colored surfaces, it ensures a clear, brilliant look.Fine-cut polish for flawless finish on gelcoat and specialty paintsIdeal for white and light boat paint and aircraft surfacesRemoves fine scratches, holograms, and hazeDelivers high gloss and sharp reflectionsCompatible with rotary and dual-action polishersPart of the RUPES Gelcoat & Marine Polishing SystemThe XF-500 is a key step in the RUPES Gelcoat and Marine program, used for final surface refinement after defect correction. The system includes perfectly matched polishes for maximum efficiency:MARINE XC-100 | EXTRA-CUT POLISHING COMPOUNDMARINE XC-300 | FAST-CUT POLISHING COMPOUNDMARINE XF-500 | FINE-CUT POLISHMARINE XF-600 | ULTRA-FINE POLISHFlawless Finish for Light SurfacesOn white and light gelcoat or paint, a perfect finish is crucial. XF-500 ensures even gloss development without haze, lifting the surface to professional standards. It’s ideal for final clarity and depth enhancement after cutting.Optimal Pad Combinations for Maximum ResultsUse these pads for best performance:Detail Passion Therminator Intermedia Blue PadDetail Passion Therminator Maroon Finish PadThe polish works perfectly with both rotary and dual-action polishers, offering superb control and top surface quality.Clean Application and Efficient WorkflowThe advanced XF-500 formula enables low dust operation and easy buffing, simplifying work processes and optimizing workflow, especially for large marine and aviation projects.

RUPES Marine XF-600 Ultra Fine – Ultimate High-Gloss Finish for Gelcoat, Boat Paint & Aircraft The RUPES Marine XF-600 Ultra Fine Polish is the top-tier high-gloss polish designed for flawless finishing of gelcoat, boat paint, and aircraft coatings. It effectively removes the finest defects, micro-scratches, and haze, delivering maximum shine with mirror-clear reflections. Ideal as the final step, it provides a showboat/showcar level finish that stands out. Ultra-fine finishing polish for peak gloss results Eliminates micro-scratches and holograms Perfect for gelcoat, boat paint, and aircraft finishes Creates mirror-like reflections & extreme clarity Compatible with rotary and dual-action polishers Final Step in the RUPES Gelcoat & Marine Polishing System The XF-600 is the finishing touch in the RUPES Gelcoat & Marine range, delivering ultimate surface refinement after defect removal and fine polishing. The lineup includes: MARINE XC-100 | EXTRA-CUT POLISHING COMPOUND MARINE XC-300 | FAST-CUT POLISHING COMPOUND MARINE XF-500 | FINE POLISH MARINE XF-600 | ULTRA-FINE POLISH Maximum Depth & Brilliant Shine XF-600 elevates surfaces to new heights with extreme depth and brilliant gloss. Perfect for demanding jobs where every detail matters—whether marine or high-end aircraft paint correction. Optimal Pad Combo for Flawless Finish Best results are achieved paired with specially tuned polishing pads: Detail Passion Therminator Intermediate Blue Pad Detail Passion Therminator Finish Black Pad The polish works perfectly with both rotary and dual-action polishers, ensuring precise control and outstanding finish quality. Effortless Application & Smooth Workflow XF-600 offers clean application, minimal residue, and easy buffing, boosting workflow efficiency and optimizing work organization—especially on large marine and aviation projects.

RUPES Marine XP-700 Nano Protection – Ultimate Shine & Shield for Gelcoat, Boat Paint & Aircraft The RUPES Marine XP-700 Nano Protection is an advanced protective polish designed for sealing gelcoat, boat paint, and painted aircraft surfaces. Combining fine polishing capabilities with cutting-edge nanotech, it delivers a smooth, protected, and high-gloss finish. Perfect as the final step after polishing, it provides long-lasting defense against environmental damage, UV rays, and fresh dirt buildup. Nanotechnology-powered protective polish for durable sealing Ideal for gelcoat, boat paint, and aircraft finishes Enhances gloss, smoothness & water beading Reduces recontamination and simplifies maintenance Suitable for rotary and dual-action polishers The Perfect Final Touch in Marine Detailing XP-700 is the ultimate protection step following defect correction and finishing in the RUPES Gelcoat & Marine system. It seals prepped surfaces, ensuring a long-lasting, professional-grade result with superior resistance against environmental stress. Shine, Protection & Easy Care Its special formula creates a hydrophobic surface that repels water and dirt efficiently. This makes future cleaning easier and helps preserve the value of boats and aircraft. Additionally, the deep gloss is enhanced, giving surfaces a visibly fresher, well-maintained look. Optimal Pad Combo for Flawless Application For best results, use matching polishing pads: Detail Passion Therminator Intermediate Blue Pad Detail Passion Therminator Finish Black Pad Applicable with both dual-action and rotary polishers, ensuring even, controlled application on both large and small surfaces. Efficient Use & Streamlined Workflow XP-700 stands out with easy application, minimal residue, and rapid buffing. It streamlines detailing processes and boosts workflow efficiency—perfect for professional use in marine and aviation care.

RUPES Marine XP-900 Polymer Spray Sealant – Long-Lasting Protection for Gelcoat, Boat Paint & AircraftThe RUPES Marine XP-900 Polymer Spray Sealant is a cutting-edge protective spray designed for fast and effective sealing of gelcoat, boat paint, and painted aircraft surfaces. Its innovative polymer technology delivers long-lasting durability, intense smoothness, and deep gloss. Perfect for regular maintenance or as an extra shield post-polishing, this spray offers an ideal mix of performance and easy application.Polymer spray protection with extended durabilityOptimized for gelcoat, boat paint, and aircraft finishesEnsures high smoothness and strong water beading effectRefreshes existing sealantsQuick and easy use without a polishing machineFast Sealant With Maximum ImpactXP-900 was engineered to build a premium protective layer in no time. Simply spray, spread, and buff off with a microfiber cloth to create a resilient shield protecting surfaces from UV rays, salt, water spots, and environmental damage.Ideal for Maintenance, Refreshing & ProtectionThis spray is perfect for caring for and refreshing already polished or sealed surfaces. It intensifies gloss, enhances color depth, and delivers a noticeably smooth finish. Especially in marine settings, it helps ease cleaning and significantly reduces maintenance efforts.Perfect Addition to Marine Care RoutineAs part of the RUPES Marine Care concept, XP-900 complements prior polishing and protection steps flawlessly. It works both as a standalone sealant and for regular upkeep, ensuring a consistently well-maintained appearance.Efficient Application & Better WorkflowIts easy machine-free use saves time and enables an efficient working process, particularly for large surfaces like boats or aircraft. Quick buffing with a microfiber cloth reduces labor and supports optimized work organization — ideal for pros and passionate detailers alike.

Highly abrasive cutting paste that removes scratches and inclusions from repaired or original factory paintwork. Leaves minimal processing marks and almost no polishing residues. Easy to use. High material removal with minimal matting. Removes sanding marks from P1000 sandpaper. Strong cutting polish for rotary and eccentric use Removes sanding marks up to P1000 and finer Ideal for severe paint defects Minimal matting with maximum removal

High-abrasive polishing paste that removes scratches and inclusions from repaired parts or original factory paints. Leaves minimal processing marks and nearly no polishing residues. Easy to work with. High material removal with minimal dulling. Removes sanding marks from P1000 sandpaper. Strong cutting polish for rotary and eccentric use Removes sanding scratches up to P1000 and finer Ideal for severe paint defects Minimal dulling with maximum material removal

Abrasive polishing compound for dual action polishing to remove scratches or locally sanded paint layers. High material removal rate combined with excellent gloss finish. Eliminates deep scratches and etching from bird droppings, insects, and tree sap. Removes sanding marks up to P1500. Powerful dual action polish with high cut rate Removes sanding marks up to P1500 and finer Ideal for severe paint defects Compatible with foam and microfiber pads

High abrasive polishing paste for dual action processing to grind down scratched or locally sanded paint layers. Strong material removal while achieving high gloss. Eliminates deep scratches as well as etchings from bird droppings, insects, and tree sap. Removes sanding marks up to P1500. Powerful dual action polish with high material removal Removes sanding marks up to P1500 and finer Ideal for severe paint defects Compatible with foam and microfiber pads

High-effective cutting polish designed for high processing speeds, featuring ultra-pure, extremely hard aluminum oxide. Faster with a large processing window. Removes scratches down to P800. Extreme, fast-cutting polish for rotary and eccentric use Removes scratches down to P800 and finer Ideal for severe paint defects Large processing window

Highly effective grinding polish for high process speeds, contains pure, extremely hard aluminum oxide. Even faster, large processing window. Removes scratches up to P800. Extreme, fast-cutting polish for rotary and eccentric use Removes scratches up to P800 and finer Ideal for severe paint defects Large processing window