ShineMate Mini Polishing Pad Cone Medium Cut Orange 5-Pack

3D One Hybrid is a revolutionary polish from the US manufacturer 3D Products. With 3D One Hybrid, paint defect corrections can be achieved with a perfect finish in significantly less time. 3D One Hybrid is suitable for multiple polishing steps and can be used as a universal polish with various polishing pads and application methods. 3D One offers an extended working time, doesn’t create dust, and is easy to remove from the paint. The Perfect Polish for Professionals and Enthusiasts: 3D One Hybrid For professionals, it is crucial that the consumption of a polish is as low as possible while allowing for a variety of processing steps. 3D One Hybrid can be used with all types of polishing pads - foam pads, microfiber pads, lambswool pads, wool pads. Car care enthusiasts will appreciate that 3D One Hybrid is low-odor and can be applied for extended periods. For simple hand polishing, 3D One Hybrid can even be used in direct sunlight. 3D One Hybrid is free of fillers and can be completely removed even with gentle degreasers. 3D One Hybrid is ideal for subsequent sealants using silicones, polymers, or high-quality waxes. Universally Applicable: Rotary, Eccentric, Forced Eccentric 3D One Hybrid is designed for use with modern high-performance polishing machines and can be processed rotary, eccentric, and forced eccentric. On aggressive polishing pads, 3D One Hybrid delivers considerable material removal, while the long working time allows for a perfect mirror finish with finer pads. The tendency to create holograms during rotary processing has been nearly eliminated by the unique "Ceramic Alumina Abrasive" formula. Extremely Long Working Time Thanks to Durable Abrasives and High-Quality Carrier Liquid 3D One Hybrid was developed with a deliberately high proportion of carrier liquid and durable abrasives. This combination is, in our opinion, unique worldwide. Thanks to this formulation, 3D One Hybrid can be perfectly controlled over polishing type and pad, making it excellent for medium cut to high gloss finishing. For higher material removal, we recommend switching from a random orbital polisher to a rotary polisher or using a classic heavy cut polish eccentrically or forced eccentrically. Additionally, 3D One Hybrid serves as a problem solver for sensitive paints and "sticky paints". To provide an affordable entry point, we offer 3D One Hybrid in various sizes and a sample pack.

3D ACA X-TRA 500 is an innovative cutting polish designed for HeavyCut and MediumCut applications. Known as 3D 500, this polish is produced by 3D Products in the USA. With 3D 500, paint defect corrections can be made in no time. The product contains advanced "Alpha Ceramic Alumina" polishing particles that allow for significantly longer working time. 3D 500 is suitable for both soft single-layer paints and hard clear coats. It is free from fillers and can be completely removed even with mild paint degreasers. High Cut and Gloss Level with 3D ACA X-TRA 500 3D 500 can be applied using rotary or eccentric machines, leaving a very glossy finish for a HeavyCut polish without hazing. Ideally, 3D 500 is used before a finishing polish such as 3D ACA X-TRA 520, 3D One Hybrid, or any comparable polish. 3D ACA 500 becomes clear after a short working time, allowing a good view of the paint surface. 3D 500 is characterized by a very long working time and is economical due to the late breaking down of the polishing particles into smaller particles. Easy to Use: 3D ACA X-TRA 500 3D 500 is solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 500 does not create dust and can be easily wiped off. It is recommended to use 3D sparingly to avoid any excess. We recommend using microfiber pads, wool pads, and hard to medium-hard foam pads with 3D. Due to its high viscosity, 3D 500 does not splash even at high RPMs.

3D ACA X-TRA 520 is a groundbreaking polish designed for fine polishing and finishing tasks. Known by the shorthand name 3D 520, this polish is manufactured by 3D Products in the USA. With 3D 520, paint defect corrections following heavy cut polishing can be quickly brought to a high gloss. This water-based formula contains "Alpha Ceramic Alumina" polishing agents which allow for significantly longer working times. 3D 520 is suitable for both soft single-layer paints and hard clear coats. It is free from fillers and can be completely removed even with mild paint degreasers. Hologram-Free, Crystal Clear Finish with 3D ACA X-TRA 520 High Gloss Polish 3D 520 can be applied using both rotary and eccentric polishing methods, leaving behind a crystal clear finish that is free of holograms. Ideally, 3D 520 is used after a heavy cut or medium polish, such as the 3D ACA X-TRA 500 or a comparable polish. The polish achieves clarity quickly even after a short working time, allowing for great visibility on the paint. 3D 520 stands out due to its extended working time, as the late breakdown of polishing agents into small particles makes it user-friendly and cost-effective. Very Easy Application: 3D ACA X-TRA 520 3D 520 is water-based, solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 520 does not create dust and is easy to wipe off. It is recommended to apply 3D 520 sparingly to avoid excess. We recommend using it with softer finishing foam pads.

ShineMate Chuck Adapter 1/4-20 Inch to 6 mm The ShineMate Chuck Adapter 1/4-20 Inch to 6 mm enables flexible use of polishing cones, polishing heads, and polishing pads with a 1/4-20 inch thread on cordless drills and machines with a 6 mm chuck. It's the perfect solution for precise polish work in tight, hard-to-reach, or delicate spots, significantly expanding the use of existing polishing attachments. Adapter from 1/4-20 inch thread to 6 mm chuck Suitable for polishing cones, heads, and pads Ideal for use on cordless drills Stable and secure connection with no play Perfect for precise detail and spot polishing Maximum Flexibility for Detail Work This adapter allows polishing attachments originally designed for machines with a 1/4-20 inch mount to be easily used on standard cordless drills. It's ideal for pinpoint work on recesses, edges, emblems, door handle areas, interior applications, or motorcycle parts. Secure Grip in the Chuck The precisely crafted 6 mm mount ensures a firm hold in the chuck and guarantees smooth operation even during rotational use. Polishing cones and pads can be securely threaded and controlled, enabling clean and even results. The ShineMate Chuck Adapter 1/4-20 Inch to 6 mm is the perfect addition for detailers and prep pros who need maximum versatility and precise control when polishing the smallest surfaces.