Rupes DA Fine Polishing Pad 50mm Ø 50/70mm

Polishing pads are a major expense in vehicle detailing. With proper maintenance, they can be transformed from a classic wear item into a long-lasting working material. The Detailing Products Pad Revitalizer cleans foam, microfiber, hybrid, or wool pads deeply from polishing residues, polish oils, and other contaminants in no time. Significantly extend the lifespan of polishing pads with Detailing Products' cleaner powder The citrus-based cleaning powder nearly completely dissolves all residues of polish from the pad, allowing for easy rinsing. It penetrates deeply into the fibers and foam structure, ensuring that stiff foam pads and matted wool pads are fully regenerated. After treatment, simply rinse the polishing pad. The Pad Revitalizer can even remove dried polishing residues from pads that would normally be discarded under regular inspection. It significantly helps save on polishing discs by allowing for reuse through thorough cleaning. Just 20 grams is sufficient for 10 liters of cleaning solution To use, simply mix one scoop of the cleaning powder with water. Soak polishing pads in the cleaning water for 15 minutes, then rinse with water. Heavily soiled pads can be soaked for several hours. We recommend placing the pads in the cleaning solution right after use. The Pad Revitalizer is solvent-free and biodegradable.

While we can't say if the innovative RAGS TO RICHES™ microfiber towel detergent truly lives up to the meaning of "from rags to riches," we can assure you that it was developed by the giants of the detailing business: legendary detailer Renny Doyle, brand ambassador and product manager Levy Gates from The Rag Company, and brothers Dave and Bob Philips from P&S Detailing Products. The result is an effective product designed for washing microfiber towels, foam pads, cotton, and all other fabric blends. RAGS TO RICHES™ is a highly concentrated formula that can be used sparingly. Revitalize your high-quality microfiber towels: P&S Detailing Products | The Rag Company - RAGS TO RICHES™ RAGS TO RICHES™ can completely regenerate microfibers, eliminating typical dirt, residues from polishes, polymers, cleaners, and waxes from the fibers. The cleaning process restores the high water absorption of the fibers. Color and brightness are reset to original levels through a special color refreshing formula. Developed specifically for microfiber products, RAGS TO RICHES™ is also excellent for polishing pads and natural fibers from fur or wool. Dosage and Usage Recommendations For small wash loads and moderate dirtiness, one fluid ounce 30ml will suffice per wash. For larger wash loads and/or heavier dirt, usually two fluid ounces will be sufficient. RAGS TO RICHES™ is effective as a standalone detergent; no additional detergents are needed. Used towels can also be pre-cleaned directly in a cleaning solution of 20 liters with 1-2 fluid ounces 30-60ml. For cleaning polishing pads, a detergent/water solution of 10 liters and 2 fluid ounces 60ml can be used. RAGS TO RICHES™ has been certified by the product management and development team of the German manufacturer "Detail Passion" for their microfiber products.

With Lake Country Snappy Clean Boost, polishing pads can be easily and thoroughly cleaned. This powder from the US manufacturer features a patented formula that dissolves polish residues and dirt. At the same time, Lake Country Snappy Clean Boost reactivates the cell or fiber structure of the pads. Although this cleaner is specifically designed for Lake Country pads, it also works excellently with Flex, Sonax, Koch Chemie, Meguiars, and other polishing pads. Deep Cleaning for Polishing Pads for Longevity of Microfiber, Foam, and Wool Pads Citrus-based cleaning powder for polishing pads Patented formula for cleaning and reactivating the cell or fiber structure of polishing pads Designed for Lake Country polishing pads, also ideal for all other polishing discs Deep cleaning of polishing pads ensures long life 100% biodegradable

Lake Country Padwasher System 4000™: Pre-Information on Availability The System 4000™ from Lake Country is a revolutionary polishing pad cleaning system. Unlike other systems, the cleaning of polishing pads can be carried out directly with the polisher in hand. This prevents polishing residue from drying and optimizes workflow. The patented Pure Flo technology is a closed-loop cleaning system. The user controls how much cleaning liquid flows into the system by pressing the pump. With the System 4000™ pad cleaner, polishing pads are cleaned faster, more thoroughly, and more gently than ever imagined. Two water chambers for flushing foam, microfiber, hybrid fiber, and wool pads The cleaning system consists of two separate chambers for clean and used water. Fresh cleaning water is drawn from the lower section, optionally mixed with "Snappy Clean Booster" or other pad cleaning agents. The upper chamber holds the already used dirty water. The user-controlled water flow makes the system efficient, economical, and environmentally friendly. For less dirty pads, the cleaning water in the upper chamber can be reused multiple times. Depending on the type of pad or level of contamination, the user decides how often to reuse the water. Easy cleaning of polishing pads with rotary, forced rotation, or dual-action polishers To start, simply remove the wastewater collection tray from the cleaning system, fill the cleaning tray with water and cleaning agent, and reinsert the collection tray. At low speed, the dirty pad can now be cleaned directly with the polisher. The water amount is controlled by pressing on the washing chamber. Once the pad is sufficiently cleaned, the polisher is lifted, and the water is spun out of the pad or sponge by increasing the speed. The holder of the collection tray is designed to ensure that the spun-out water lands back in the collection tray. Lake Country Padwasher System 4000: Order directly at Chemical-Shark.de! Fast, efficient, and economical cleaning of polishing pads directly with the polisher in hand Compatible with rotary, dual-action, and forced rotation polishers Cleans all pad sizes made of foam, microfiber, hybrid fibers, and wool Environmentally friendly with flexible reuse of cleaning water as needed Patented and developed by Lake Country: a leading manufacturer of polishing pads and sponges Official distribution through Chemical-Shark.de Two modes: Standard and closed-loop cleaning cycle The system supports two modes. To reuse the cleaning solution, the appropriate screws on the collection tray can be removed. If the cleaning cycle is not intended for reuse, the screws remain closed or inserted. These modes are also explained in the video. Lake Country Pad Washer 4000 vs. Lake Country Pad Washer 3000 The Pad Washer 4000 is a direct advancement of its predecessor, the 3000. Unlike the 3000, it no longer requires filter inserts, and the splash guard has been replaced. Residue separation is now managed differently, and the splash guard is rendered unnecessary by a taller edge and the yellow edge cover. These changes, along with an improved pump, make the system more robust and easier to use. Chemical-Shark.de Recommendations In our opinion, the Pad Washer System 4000™ is most effective when pads are cleaned immediately after use. For professional use, we recommend always keeping the cleaning system ready. While all-purpose cleaners (APCs) can be used, cleaning is more reliable with specialized cleaners from Lake Country or Wolfgang. You can find suitable cleaning agents listed under "Accessories" at the bottom of this page. The operation is explained in the application video, also available at the bottom of this page.

Original support pad for the Flex PXE 80 mini polisher. The support pad with a Velcro attachment of 50mm is suitable for the eccentric and rotary applications of the Flex PXE and can be used with compatible polishing pads from Rupes, Flex, Detail Passion, and Lake Country. Suitable polishing pads are also available at Chemical-Shark.de. Differences between the 30mm, 50mm, and 75mm support pads Flex continues to provide the PXE 80 sets with a 30mm support pad and supplies 40mm polishing pads for this, which leads to some instability as these pads do not adhere laterally to the support pad. The 75mm support pad is not approved for use with rotary applications due to the high stress on the ball bearing, although many users use the corresponding safety pin to make it work. The new dampened 50mm support pad can be used both rotatively and eccentrically, but not with 30 or 40mm polishing pads, as there is a risk of the pad being damaged and the support pad then coming into contact with the paint. We strongly recommend using suitable polishing pads for each support pad. BP-M 30mm: At least 30mm polishing pads from Rupes, Detail Passion, or Lake Country, or 40mm Flex polishing pads BP-M 50mm: At least 50mm polishing pads from Rupes, Detail Passion, or Lake Country BP-M 75mm: At least 75mm polishing pads from Rupes, Detail Passion, Lake Country, or Flex