Product information "Profilm PPF reGen Paint Protection Film 1.52 x 1 m"
Profilm PPF reGen is a very easy-to-apply paint protection film featuring instant self-healing. The paint protection film is optically clear and equipped with a protective topcoat. The urethane and adhesive used cannot yellow. Despite its substantial total thickness of 193 µm, reGen is extremely flexible and stretchable, making it suitable for beginners and new-vehicle applications. Profilm PPF reGen is offered with a 7-year warranty.
- Instant healing: Self-healing without heat
- Anti-yellowing: Protection against yellowing
- Stain resistance: Resistant to staining
- Super-easy to install: Very easy to install
- 7-year warranty: 7-year warranty coverage
Profilm PPF Germany & Austria
In Germany and Austria, Profilm is distributed exclusively by KRÜGER GmbH, Limburg, and can be purchased through Chemical-Shark.de. Products requiring certification, such as the Ultra Clear Pro UCP and ProColor Color Change PPF paint protection films, are only supplied to authorised installers. The reGen, Super Matte and Satin Matte films are available to the general public. The Profilm PPF Cut software ProCut can be licensed monthly or for a full year. Bookings can also be made through our Chemical-Shark.de web portal. A wide range of tools, application products and coatings is also available. Profilm is an official partner of Gtechniq Smart Surface Science. Gtechniq coatings, cleaning and care products are fully compatible with Profilm PPF paint protection films.
Profilm Advanced Materials
Profilm Advanced Materials is an English-Asian company with the industry’s most modern cleanroom production for window and paint protection films. The company is one of currently 11 manufacturers belonging to the strictly controlled IWFA International Window Film Association. Research, development and production at Profilm Advanced Materials are certified according to ISO 9001, ISO 14001, OHASA 18001, ISO TS16949 and FSC. Profilm films are also certified by a wide range of the largest automotive manufacturers. OEM agreements are in place with these automotive manufacturers.
| Contents: | 1 m, 5 m |
|---|
Application instructions for Profilm PPF paint protection films
Applying Profilm PPF paint protection films requires clean working conditions, the correct temperature and careful surface preparation. Before installation, the vehicle must be thoroughly washed, degreased and freed from dirt, wax or silicone. For optimum adhesion, the application temperature should be between 15°C and 25°C, ideally around 20°C.
Slip Solution: A slip solution made from pH-neutral baby shampoo is recommended for positioning the film. Dosage: 2–5 ml of shampoo per 1 litre of water. This mixture allows the film to be moved easily across the surface until it is correctly aligned.
Tack Solution: A tack solution is used to fix the film in curves or along edges. For this purpose, 20–30% isopropyl alcohol (99.9%) is mixed with water. Alternatively, warm water at a temperature of 50–65 °C can be used to increase adhesion and make the material more flexible.
The film is then evenly squeegeed to remove water and air bubbles. In highly stressed areas, additional heat can be applied to ensure that the edges are properly bonded.
PreCuts: Precise PreCuts are available via the ProCut software for many vehicle models, simplifying installation and ensuring a perfect fit. For further information, PreCut bookings or product training, please contact the sales department.
Note: Adapted application methods may be required for certain types of film. The sales department can also provide specific recommendations and instructions in these cases.
Profilm provides the following PDF file as a recommendation for mixing the slip and tack solutions:
Mixing_Solutions_06-2026.pdf
Login
Profilm PPF reGen Paint Protection Film 1.52 x 1 m
€113.00
Available, delivery time: 1-3 days
Product information "Profilm PPF reGen Paint Protection Film 1.52 x 1 m"
Profilm PPF reGen is a very easy-to-apply paint protection film featuring instant self-healing. The paint protection film is optically clear and equipped with a protective topcoat. The urethane and adhesive used cannot yellow. Despite its substantial total thickness of 193 µm, reGen is extremely flexible and stretchable, making it suitable for beginners and new-vehicle applications. Profilm PPF reGen is offered with a 7-year warranty.
- Instant healing: Self-healing without heat
- Anti-yellowing: Protection against yellowing
- Stain resistance: Resistant to staining
- Super-easy to install: Very easy to install
- 7-year warranty: 7-year warranty coverage
Profilm PPF Germany & Austria
In Germany and Austria, Profilm is distributed exclusively by KRÜGER GmbH, Limburg, and can be purchased through Chemical-Shark.de. Products requiring certification, such as the Ultra Clear Pro UCP and ProColor Color Change PPF paint protection films, are only supplied to authorised installers. The reGen, Super Matte and Satin Matte films are available to the general public. The Profilm PPF Cut software ProCut can be licensed monthly or for a full year. Bookings can also be made through our Chemical-Shark.de web portal. A wide range of tools, application products and coatings is also available. Profilm is an official partner of Gtechniq Smart Surface Science. Gtechniq coatings, cleaning and care products are fully compatible with Profilm PPF paint protection films.
Profilm Advanced Materials
Profilm Advanced Materials is an English-Asian company with the industry’s most modern cleanroom production for window and paint protection films. The company is one of currently 11 manufacturers belonging to the strictly controlled IWFA International Window Film Association. Research, development and production at Profilm Advanced Materials are certified according to ISO 9001, ISO 14001, OHASA 18001, ISO TS16949 and FSC. Profilm films are also certified by a wide range of the largest automotive manufacturers. OEM agreements are in place with these automotive manufacturers.
| Contents: | 1 m, 5 m |
|---|
Application instructions for Profilm PPF paint protection films
Applying Profilm PPF paint protection films requires clean working conditions, the correct temperature and careful surface preparation. Before installation, the vehicle must be thoroughly washed, degreased and freed from dirt, wax or silicone. For optimum adhesion, the application temperature should be between 15°C and 25°C, ideally around 20°C.
Slip Solution: A slip solution made from pH-neutral baby shampoo is recommended for positioning the film. Dosage: 2–5 ml of shampoo per 1 litre of water. This mixture allows the film to be moved easily across the surface until it is correctly aligned.
Tack Solution: A tack solution is used to fix the film in curves or along edges. For this purpose, 20–30% isopropyl alcohol (99.9%) is mixed with water. Alternatively, warm water at a temperature of 50–65 °C can be used to increase adhesion and make the material more flexible.
The film is then evenly squeegeed to remove water and air bubbles. In highly stressed areas, additional heat can be applied to ensure that the edges are properly bonded.
PreCuts: Precise PreCuts are available via the ProCut software for many vehicle models, simplifying installation and ensuring a perfect fit. For further information, PreCut bookings or product training, please contact the sales department.
Note: Adapted application methods may be required for certain types of film. The sales department can also provide specific recommendations and instructions in these cases.
Profilm provides the following PDF file as a recommendation for mixing the slip and tack solutions:
Mixing_Solutions_06-2026.pdf
Login
Manufacturer / Responsible Person
Profilm, A. 216 The Simpson Buildings , GU6 8GA Dunsfold Park Cranleigh GB, info@profilmgrp.com
Krüger GmbH, In der Schwarzerde 5-7 , 65549 Limburg DE, info@kmp360.de