Skip to main content Skip to search Skip to main navigation
Lightning fast shipping by DHL
Over 2,500 items directly available!
Order by 3:30 pm, immediate dispatch
Get free advice now: info@chemical-shark.de
Go to homepage
Skip product gallery

Recommandations

3D ACA X-TRA 520 Fine Finish Polish 236 ml
3D ACA X-TRA 520 Fine Finish Polish 236 ml

Average rating of 5 out of 5 stars

3D ACA X-TRA 520 Fine Finish Polish 236 ml

3D ACA X-TRA 520 is an innovative paint polish for fine polishing and finishing applications. The polish known by its short designation 3D 520 is produced by 3D Products in the USA. With 3D 520, paint defects remaining after HeavyCut polishing steps can be polished to a high gloss in a very short time. 3D 520 is water-based and contains "Alpha Ceramic Alumina" abrasives, which enable a significantly longer working time. 3D 520 is suitable for both soft single-stage paints and hard clear coats. 3D 520 is free of fillers and can be completely removed even with mild paint degreasers. Hologram-free, crystal-clear finish with 3D ACA X-TRA 520 high-gloss polish 3D 520 can be used both eccentrically and rotationally and leaves a crystal-clear, hologram-free finish. Ideally, 3D 520 is used after a HeavyCut or medium polish such as 3D ACA X-TRA 500 or a comparable polish. 3D ACA 520 becomes clear after a short working time, allowing excellent visibility of the paint surface. 3D 520 is characterized by a very long working time and, due to the very late breakdown of the abrasives into small particles, is economical and easy to use. Very easy to use: 3D ACA X-TRA 520 3D 520 is water-based, solvent-free, kerosene-free and free of fillers. Despite its environmentally friendly and user-friendly formulation, 3D 520 does not create dust and can be wiped off easily. 3D 520 should be applied sparingly to avoid any excess product. We recommend using 3D with softer finishing foam pads.

Content: 0.236 Liter (€75.85* / 1 Liter)

Regular price: €17.90*
3D Speed All in One 425 Polish, Glaze & Wax Sealant 236 ml
3D Speed All in One 425 Polish, Glaze & Wax Sealant 236 ml

Average rating of 5 out of 5 stars

3D Speed All in One 425 Polish, Glaze & Wax Sealant 236 ml

3D Speed All in One 425 – Paint Polish, Glaze and Wax Sealant in One Product The 3D Speed All in One 425 paint polish, also known as 3D HD Speed, combines effective defect correction, intense depth of gloss and a high-quality synthetic wax sealant in a single product. The innovative one-step polish combines the abrasive and gloss-enhancing properties of 3D One Hybrid with a protective wax component. This reduces light scratches, swirls, holograms and oxidation while creating an impressive high-gloss finish with additional paint protection. The included Alpha Ceramic Alumina polishing particles enable an especially long working time and controlled defect correction. Despite the temperature-resistant wax content, the polish is exceptionally easy to wipe off. 3D Speed is suitable for both soft single-stage paints and hard clear coats and can be applied with rotary, dual-action and forced-rotation dual-action polishers. 3-in-1 paint polish with defect correction, gloss enhancement and synthetic wax sealant One-step polish for fast and efficient vehicle detailing Removes light scratches, swirls, holograms and oxidation Alpha Ceramic Alumina polishing particles for a long working time and controlled cutting performance Creates exceptional depth of gloss and intense color depth Integrated synthetic wax sealant with temperature-resistant wax components Very easy to wipe off despite the integrated wax components Suitable for soft single-stage paints and hard clear coats Can be applied with rotary, dual-action and forced-rotation dual-action polishers Ideal as a standalone polish, glaze or finishing polish Recommended for use with high-quality polishing pads from Detail Passion or Lake Country Also suitable for professional multi-stage paint correction 3D Speed – Universal One-Step Polish for Fast Paint Correction The 3D Speed All in One polish was developed for particularly efficient vehicle detailing. While conventional multi-stage polishing systems often require separate cutting polishes, high-gloss polishes and sealants, 3D Speed combines these properties in a single work step. The polish removes light paint defects, improves surface clarity and simultaneously leaves a protective synthetic wax layer. This makes it ideal for fast one-step paint correction, professional used-car preparation and regular gloss enhancement on well-maintained vehicles. Excellent results can be achieved, especially on paintwork with light wash marks, swirls or superficial oxidation, when using the right combination of polishing machine and pad. The integrated wax sealant eliminates an additional work step and immediately provides a glossy, well-maintained paint finish after polishing. Alpha Ceramic Alumina – Innovative Polishing Particles for a Long Working Time A special feature of the 3D Speed 425 paint polish is its modern Alpha Ceramic Alumina polishing particles. These specially developed abrasives enable controlled defect correction and offer an exceptionally long working time. The polish can be worked evenly over several polishing passes without drying out prematurely. This allows both professional detailers and discerning users to adjust the cutting performance precisely to the condition of the paintwork. At the same time, the finely tuned formulation provides high surface clarity and intense depth of gloss. Its effortless wipe-off behavior is particularly advantageous: despite the included synthetic wax components, polishing residue can be easily removed with a high-quality microfiber towel. The combination of a long working time, good cutting performance and easy wipe-off makes 3D Speed an especially user-friendly all-in-one paint polish. Paint Polish with Wax Sealant – Polish, Create Gloss and Protect The 3D Speed polish with wax combines mechanical defect correction with an integrated synthetic wax sealant. While the abrasive components reduce light scratches and surface defects, the conditioning and protective components leave a smooth, glossy paint finish. The included temperature-resistant wax components help protect against everyday environmental influences and improve the surface's water-beading behavior. This makes 3D Speed ideal for vehicle owners looking for a paint polish with integrated paint protection who want to avoid a separate sealing step. This combination offers a significant time advantage, particularly when professionally preparing larger vehicle fleets or vehicles for sale. The actual durability of the wax layer depends on vehicle use, washing habits and environmental conditions. 3D Speed as a Glaze – Exceptional Depth of Gloss on Solid and Single-Stage Paints In addition to functioning as a classic one-step polish, the 3D Speed All in One 425 also performs as a glaze for optical paint enhancement. The polish can create exceptional color depth and an intense, rich gloss, particularly on solid colors and sensitive single-stage paint finishes. The combination of fine defect correction, gloss-enhancing ingredients and synthetic wax components creates a particularly high-quality surface appearance. Dark solid colors benefit especially from its pronounced depth-of-gloss effect. 3D Speed can also be used as a finishing polish on hard clear coats to refine light polishing marks and maximize gloss. Thanks to its gloss-enhancing and partially concealing properties, the polish is ideal for visually demanding vehicle detailing where an impressive finish is the priority. Rotary, Dual-Action or Forced-Rotation – Flexible Application with Professional Polishing Pads The 3D Speed one-step paint polish can be used flexibly with different polishing machine systems. Both rotary polishers and free-spinning dual-action polishers and forced-rotation dual-action polishers are suitable for the job. For optimum results, we recommend combining it with high-quality polishing pads from Detail Passion or Lake Country. The choice of polishing pad allows the cutting performance to be precisely adjusted. Medium-firm foam pads offer a balanced combination of defect correction and a high-gloss finish, while softer finishing pads are particularly suitable for enhancing the gloss of sensitive paintwork. More abrasive polishing pads can increase the correction performance, although the achievable finish always depends on the condition and hardness of the paint. The long working time and easy wipe-off make 3D Speed a versatile polish for both professional detailers and enthusiastic users. 3D Speed as a Finishing Polish after Intensive Paint Correction Although the 3D Speed All in One polish was developed as a standalone combination of polish and sealant, it is also excellent as the final step in a multi-stage paint correction. On heavily damaged paint surfaces, intensive defect correction can first be carried out with a suitable cutting polish. For this purpose, the 3D One Hybrid or the powerful 3D Heavy Cut polishes 500 and 510, for example, are suitable. 3D Speed can then be used to refine any remaining light polishing marks, increase depth of gloss and apply a synthetic wax layer at the same time. This creates a high-quality finish with additional paint protection. Subsequent application of suitable natural waxes or compatible polymer products is generally also possible, although compatibility with the wax components already included should be taken into account. 3D Speed before Ceramic Coatings – Important Notes on Paint Preparation The 3D Speed paint polish can also be used for demanding finishing work thanks to its excellent gloss-enhancing properties. It is particularly impressive on sensitive solid colors, where it creates intense color depth and an even surface appearance. However, the polish contains gloss-enhancing and protective components that may remain on the paint. Therefore, 3D Speed is not the preferred choice for immediate preparation before a ceramic coating, as such residues may impair the adhesion of a ceramic coating. If the surface is to be protected with a ceramic coating afterward, all wax, glaze and polish residues must be completely removed using suitable paint preparation. For particularly reliable preparation before ceramic coatings, a pure, non-protective finishing polish is generally recommended. When using 3D Speed before a ceramic coating, always follow the coating manufacturer's instructions. 3D Speed All in One 425 – Professional Paint Correction with Maximum Depth of Gloss The 3D Speed All in One 425 paint polish is a versatile solution for anyone who wants to polish paint, remove light scratches, create depth of gloss and seal the vehicle's paint at the same time. The innovative combination of Alpha Ceramic Alumina polishing particles, gloss-enhancing ingredients and synthetic wax sealant enables efficient defect correction with a high-quality finish. Whether used as a one-step polish for fast vehicle detailing, as a glaze for particularly intense color depth or as a final high-gloss polish after more extensive paint correction – 3D Speed impresses with its versatile applications, long working time and exceptionally easy wipe-off. Especially when combined with high-quality polishing pads from Detail Passion or Lake Country, impressive results can be achieved on a wide variety of vehicle paint finishes.

Content: 0.236 Liter (€75.85* / 1 Liter)

Regular price: €17.90*
Detail Passion Therminator Clean Polishing Pad Cleaner 475 g
Polierpads porentief reinigen: Detailing Products Pad Revitalizer bei Chemical-Shark.de

Average rating of 5 out of 5 stars

Detail Passion Therminator Clean Polishing Pad Cleaner 475 g

Polishing pads are a crucial factor in the quality of any vehicle detailing process – they transfer the power of the polishing machine directly to the paintwork and play a major role in achieving a perfect result. However, with every use, polish residues, oils and dust accumulate deep in the fibers. The result: reduced performance, uneven results and premature replacement. This is where the cleaning powder developed by Lake Country comes in – an effective yet gentle solution for thorough, material-friendly and sustainable cleaning of high-quality polishing pads. Compatible with all premium pads – tested for hook-and-loop compatibility Whether pads from Detail Passion, Lake Country, Rupes, Sonax, ServFaces, Buff and Shine or other leading brands – the cleaning powder was specifically developed for professional use and is ideally suited for foam, microfiber, hybrid and wool pads. Extensive testing showed that the powder reliably dissolves even deeply embedded residues while protecting the hook-and-loop connection, which is often damaged by inferior cleaners. Optimal results in the Lake Country Pad Washer For maximum cleaning depth, the powder can also be used in the Lake Country Pad Washer. The combination of mechanical movement and chemical action removes even stubborn residues more thoroughly and gently than any washing machine. Ideal for all pad types – from fine wool to durable hybrid materials. This helps maintain the full performance of your pads over the long term. Efficient, material-friendly and environmentally conscious Just 20 grams of powder is enough for 10 liters of cleaning solution. Simply mix with warm water, place the pads in the solution immediately after use, leave to soak for at least 15 minutes and then rinse thoroughly. In case of heavy soiling, the soaking time can be extended. The cleaning powder is solvent-free, fully biodegradable and combines professional performance with a sustainable approach – perfect for anyone who wants not only to clean their pads but also to preserve them.

Content: 0.475 Kilogramm (€54.53* / 1 Kilogramm)

Regular price: €25.90*
Lake Country 125mm HDO Microfiber OneStep Pad, Orange
Lake Country 125mm HDO Microfiber OneStep Pad, Orange
Lake Country 125mm HDO Microfiber OneStep Pad, Orange

Designed for maximum cut, Lake Country microfiber pads from the HDO series deliver powerful defect removal. As known from the HDO polishing pads made by the American manufacturer, a special foam is used as the backing plate. This helps reduce lateral or horizontal movement and therefore frictional heat, which can quickly become problematic when using high-performance dual-action and forced-rotation polishers. The microfiber used is available in different levels of hardness and abrasiveness and is resistant to heat and material fatigue. The microfiber is designed for maximum cut, enabling fast correction of scratches and paint defects. Despite the extreme demands, especially when used with high-performance polishers from Rupes and Flex, Lake Country microfiber pads are exceptionally durable, justifying their higher price. Top-level pressure distribution and shape design: Lake Country HDO pads From 130mm onward, Lake Country HDO microfiber pads feature a heat-dissipating center chamber with a milled hole for additional cooling and precise positioning. Lake Country HDO pads are 30–40% more expensive than the newer Lake Country SDO pads, but the price difference is justified, especially when used with forced-rotation polishers such as the Flex XCE 10-8 or the Rupes LK900e mille. Lake Country microfiber is also highly resilient and easier to clean when using newer high-performance compounds such as Rupes D-A Coarse Compound, Sonax Ultimate Cut 6-3 and Sonax CutMax abrasive compound. Lake Country HDO microfiber pads available in two abrasive levels The microfiber pads in the Lake Country HDO series are available in different abrasive levels. The microfiber pad with a blue backing layer delivers maximum cut while already providing an acceptable gloss finish. The microfiber pad with an orange backing layer delivers slightly less cut but already achieves a good gloss finish. With the appropriate polish, the "orange" microfiber pad can be used for one-step paint correction. HDO pads are available with 3 different foams HDO microfiber pad with blue backing layer: Designed for maximum cut and the removal of scratches, swirls and oxidation. Perfectly suited to fast paint defect correction HDO microfiber pad with orange backing layer: Medium cut, removes moderate paint defects while providing good finishing, suitable for one-step paint correction We stock Lake Country HDO pads in all available sizes: Hook-and-loop backing, polishing surface: 80/90mm, 130/140mm, 150/165mm Pad thickness: 13mm What makes Lake Country foam pads so unique? Extremely high durability and the resulting smooth running are among the defining characteristics of Lake Country pads. Especially for medium-cut and finishing applications, it is the particularly good feel during use provided by Lake Country foam that leads to consistently perfect results!

Regular price: €14.90*
Lake Country HDO Microfiber Cutting Pad Blue 125mm, 13mm, Ø 130/140mm
Lake Country HDO Microfiber Cutting Pad Blue 125mm, 13mm, Ø 130/140mm
Lake Country HDO Microfiber Cutting Pad Blue 125mm, 13mm, Ø 130/140mm

Lake Country HDO Microfiber Cutting Polishing Pad Blue The Lake Country HDO Microfiber Cutting Polishing Pad Blue is one of the highest-performance cutting microfiber pads on the market and has been uncompromisingly designed for maximum defect removal. The focus is deliberately on microfiber technology, which enables significantly faster and more efficient defect removal than conventional foam pads. Developed for use with modern high-performance polishing machines, especially long-throw dual-action polishers and forced-rotation polishers, this pad delivers extremely fast correction results even on heavily worn paintwork. Probably one of the highest-performance cutting microfiber pads on the market Extremely high cut in a very short time Specifically developed for long-throw dual-action polishers and forced-rotation polishers Long service life even under intensive use Maximum cut through HDO technology and microfiber structure The combination of aggressive cutting microfiber and the proven HDO backing construction ensures exceptionally effective paint correction with controlled heat generation. The special HDO foam core reduces lateral pad movement and therefore minimizes friction heat—an important advantage when using high-performance machines. The microfibers used are extremely resistant to heat and material fatigue and remain stable even during long polishing cycles. This makes the blue HDO Microfiber Cutting Pad ideal for quickly removing deep scratches, heavy swirls and oxidation. Despite its enormous cutting power, the pad delivers a surprisingly clean finish for this cutting class and impresses with its exceptional durability, even in continuous professional use.

Regular price: €13.90*
AETERNO Zenit Pro Finishing v2 Polish 500g
AETERNO Zenit Pro Finishing v2 Polish 500g

Average rating of 5 out of 5 stars

AETERNO Zenit Pro Finishing v2 Polish 500g

AETERNO Zenit Pro Finishing Polish – Deep Gloss & Perfect Paint Refinement Maximum clarity, brilliant deep gloss, and an extremely fine paint finish – AETERNO Zenit Pro Finishing Polish was specially developed for the final perfection of sensitive paintwork. With the AETERNO Zenit Pro Finishing v2, available since February 2026, the Italian manufacturer has further improved the wipe-off behavior and significantly enhanced the already high gloss level. This highly advanced finishing polish delivers a flawless surface without micro-scratches or holograms and brings even demanding solid-color paints, such as the famous Porsche Black, to a new level of gloss. Thanks to its balanced cutting performance, it is also ideal for one-step polishing or medium-cut correction work where defect correction and a high-gloss finish are required. Extremely fine paint finish: Perfect high-gloss refinement without holograms. Brilliant deep gloss: Maximum color depth for an impressive finish. Optimized wipe-off behavior (v2): Effortless to polish off, even under heavy use. Glassy breakdown: Reliably indicates that the polish has been fully worked in. Ideal for solid-color and sensitive paints: Gentle and highly compatible with delicate surfaces. Optimal defect correction: Removes final polishing marks and brings paintwork to show-car level. Suitable for one-step and medium-cut work: Perfect balance between cutting performance and gloss. Effective polish for films: Safe to use on glossy paint protection films and full wraps. Easy wipe-off: Effortless polishing without smearing or residue. Perfect preparation for protective coatings: Ideal as the final step before wax or ceramic coating. Flawless Perfection for Sensitive Paintwork High-gloss paintwork, particularly deep-black solid colors such as Porsche Black, places the highest demands on a finishing polish. AETERNO Zenit Pro Finishing v2 offers exceptionally fine processing and creates a mirror-smooth result without stressing the sensitive surface. Its extremely high compatibility makes it the first choice for particularly demanding paint surfaces, as well as for sensitive paint protection films and glossy full wraps. Maximum Color Depth & Mirror-Like Reflections The innovative formula creates a unique deep gloss that visually deepens the paint and enhances light reflections. Fine polishing particles eliminate the final defects, while the gentle processing leaves a flawless finish without polishing marks or holograms. Particularly practical: When fully worked in, the polish visibly breaks down to a glassy finish—a clear indication of the optimal working time. Even under heavy use and increased heat generation, AETERNO Zenit Pro Finishing v2 can be wiped off in a controlled and effortless manner at any time. Perfect Finish for the Final Gloss As the final step after defect correction or as a standalone high-gloss polish, AETERNO Zenit Pro Finishing v2 delivers maximum visual perfection. The revised formula impresses with further improved wipe-off behavior, high process reliability even under demanding conditions, and an exceptionally clear, brilliant finish—whether for show cars, collector vehicles, or the daily perfection of high-quality paintwork and films.

Content: 0.5 Kilogramm (€57.80* / 1 Kilogramm)

Regular price: €28.90*

Manufacturer / Responsible Person
Lake Country Manufacturing, 950 Blue Ribbon Cir N , WI 53066 Oconomowoc US, sales@lakecountrymfg.com
Krüger GmbH, In der Schwarzerde 5-7 , 65549 Limburg DE, info@kmp360.de