Flex Flexible Shaft FS 140 for Flex PXE 80

3D One Hybrid is a revolutionary polish from the US manufacturer 3D Products. With 3D One Hybrid, paint defect corrections can be achieved with a perfect finish in significantly less time. 3D One Hybrid is suitable for multiple polishing steps and can be used as a universal polish with various polishing pads and application methods. 3D One offers an extended working time, doesn’t create dust, and is easy to remove from the paint. The Perfect Polish for Professionals and Enthusiasts: 3D One Hybrid For professionals, it is crucial that the consumption of a polish is as low as possible while allowing for a variety of processing steps. 3D One Hybrid can be used with all types of polishing pads - foam pads, microfiber pads, lambswool pads, wool pads. Car care enthusiasts will appreciate that 3D One Hybrid is low-odor and can be applied for extended periods. For simple hand polishing, 3D One Hybrid can even be used in direct sunlight. 3D One Hybrid is free of fillers and can be completely removed even with gentle degreasers. 3D One Hybrid is ideal for subsequent sealants using silicones, polymers, or high-quality waxes. Universally Applicable: Rotary, Eccentric, Forced Eccentric 3D One Hybrid is designed for use with modern high-performance polishing machines and can be processed rotary, eccentric, and forced eccentric. On aggressive polishing pads, 3D One Hybrid delivers considerable material removal, while the long working time allows for a perfect mirror finish with finer pads. The tendency to create holograms during rotary processing has been nearly eliminated by the unique "Ceramic Alumina Abrasive" formula. Extremely Long Working Time Thanks to Durable Abrasives and High-Quality Carrier Liquid 3D One Hybrid was developed with a deliberately high proportion of carrier liquid and durable abrasives. This combination is, in our opinion, unique worldwide. Thanks to this formulation, 3D One Hybrid can be perfectly controlled over polishing type and pad, making it excellent for medium cut to high gloss finishing. For higher material removal, we recommend switching from a random orbital polisher to a rotary polisher or using a classic heavy cut polish eccentrically or forced eccentrically. Additionally, 3D One Hybrid serves as a problem solver for sensitive paints and "sticky paints". To provide an affordable entry point, we offer 3D One Hybrid in various sizes and a sample pack.

3D ACA X-TRA 500 is an innovative cutting polish designed for HeavyCut and MediumCut applications. Known as 3D 500, this polish is produced by 3D Products in the USA. With 3D 500, paint defect corrections can be made in no time. The product contains advanced "Alpha Ceramic Alumina" polishing particles that allow for significantly longer working time. 3D 500 is suitable for both soft single-layer paints and hard clear coats. It is free from fillers and can be completely removed even with mild paint degreasers. High Cut and Gloss Level with 3D ACA X-TRA 500 3D 500 can be applied using rotary or eccentric machines, leaving a very glossy finish for a HeavyCut polish without hazing. Ideally, 3D 500 is used before a finishing polish such as 3D ACA X-TRA 520, 3D One Hybrid, or any comparable polish. 3D ACA 500 becomes clear after a short working time, allowing a good view of the paint surface. 3D 500 is characterized by a very long working time and is economical due to the late breaking down of the polishing particles into smaller particles. Easy to Use: 3D ACA X-TRA 500 3D 500 is solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 500 does not create dust and can be easily wiped off. It is recommended to use 3D sparingly to avoid any excess. We recommend using microfiber pads, wool pads, and hard to medium-hard foam pads with 3D. Due to its high viscosity, 3D 500 does not splash even at high RPMs.

3D ACA X-TRA 520 is a groundbreaking polish designed for fine polishing and finishing tasks. Known by the shorthand name 3D 520, this polish is manufactured by 3D Products in the USA. With 3D 520, paint defect corrections following heavy cut polishing can be quickly brought to a high gloss. This water-based formula contains "Alpha Ceramic Alumina" polishing agents which allow for significantly longer working times. 3D 520 is suitable for both soft single-layer paints and hard clear coats. It is free from fillers and can be completely removed even with mild paint degreasers. Hologram-Free, Crystal Clear Finish with 3D ACA X-TRA 520 High Gloss Polish 3D 520 can be applied using both rotary and eccentric polishing methods, leaving behind a crystal clear finish that is free of holograms. Ideally, 3D 520 is used after a heavy cut or medium polish, such as the 3D ACA X-TRA 500 or a comparable polish. The polish achieves clarity quickly even after a short working time, allowing for great visibility on the paint. 3D 520 stands out due to its extended working time, as the late breakdown of polishing agents into small particles makes it user-friendly and cost-effective. Very Easy Application: 3D ACA X-TRA 520 3D 520 is water-based, solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 520 does not create dust and is easy to wipe off. It is recommended to apply 3D 520 sparingly to avoid excess. We recommend using it with softer finishing foam pads.

3D ACA X-TRA 510 is a cutting-edge paint polish designed for Heavy Cut applications. This polish can be used with both rotary and dual-action polishers. As known from other 3D polishes, it has an extended working time. It works faster than the 3D 500 on severe paint defects. 3D 510 contains innovative 'Alpha Ceramic Alumina' abrasive particles, allowing for a significantly longer processing time. It is suitable for both soft single-layer paints and hard clear coats. 3D 510 is free from fillers and can be completely removed even with gentle paint degreasers. High Material Removal in No Time with 3D ACA X-TRA 510 3D 510 can be used both excentrically and rotationally, leaving a gloss finish typical for Heavy Cut polishes without dulling. Ideally, 3D 510 is used before a finishing polish like the 3D ACA X-TRA 520, 3D One Hybrid, or a comparable product. 3D ACA 510 becomes clear after a short processing time, allowing for good visibility on the paint. It features a very long working time and is economical due to the late breakdown of the abrasive particles into smaller fragments. Very Easy Application: 3D ACA X-TRA 510 3D 510 is solvent-free, kerosene-free, and filler-free. Despite its eco-friendly and user-friendly formulation, 3D 510 does not produce dust and can be easily wiped off. It is advisable to use 3D sparingly to avoid excess. We recommend using it with microfiber pads, wool pads, and hard to medium-soft foam pads. Thanks to its high viscosity, 3D 510 does not spray even at high RPMs.

FLEX PXE 80 - The Perfect Mini Polisher For rotary and eccentric free-running tasks with 3 and 12 mm stroke Flexible and easier than ever from flower grinding to hologram-free finishing with one device The ideal supplementary tool for every car detailer, painter, and spot repair area Trigger for a slow and sensitive start and lock for continuous operation Equipped with speed constant control and 4 speed settings, display easily recognizable through LEDs Perfect ergonomics and flexible grip options through optimally placed SoftGrip surfaces High running smoothness due to vibration optimization Special velcro pad for polishing and sanding With impact protection ring to protect surfaces Brushless motor for higher efficiency and longer lifespan Electronic Management System (EMS) protects the machine, extends lifespan and increases efficiency LED battery capacity indicator FLEX battery system: compatible with all 12 V battery packs Technical Data Max. Polishing pad diameter: 80mm Max. Backing pad diameter: 75 mm Stroke: 3 + 12 mm No-load speed: 400-2000/-3000/-4000/-5000 rpm. No-load stroke rate: 800-4000/-6000/-8000/-11600 Strokes/min. Battery voltage: 12V Battery capacity: 2.5 / 4.0 / 6.0 AH Different Variants of the Flex PXE 80 Available at Chemical-Shark.de Machine only without accessories 1 Flex PXE 80 Mini Polisher without batteries and power supply

Flex PXE 80 Set with AccessoriesFlex PXE 80 is the innovative mini polisher from the German manufacturer FLEX Tools. The PXE 80 can be used for polishing and sanding in both rotary and eccentric modes. The quick-change system allows for lightning-fast switching of drive types and backing pads.Special polishing pads made of microfiber and foam from the Detail Passion Pad Factory are available specifically for the PXE 80. These are listed under the "Accessories" tab below. For use with this high-performance polisher, we offer polishes from manufacturers like Meguiars, 3D Products, Sonax, Rupes, and Menzerna. We are happy to provide detailed advice.FLEX PXE 80 - The Perfect Mini PolisherFor rotary and eccentric free-running tasks with 3 and 12 mm strokeFlexible and easy like never before from bloom grinding to hologram-free finishing with one deviceThe ideal supplementary tool for any vehicle detailer, painter, and spot repair areaThrottle switch for slow and sensitive starts and locking for continuous operationEquipped with speed constant maintenance and 4 speed levels, indicated clearly by LEDsPerfect ergonomics and flexible grip options thanks to optimally placed SoftGrip surfacesHigh running smoothness due to vibration optimizationDamped special hook-and-loop pads for polishing and sandingWith protective shock ring to safeguard surfacesBrushless motor for higher efficiency and longer lifespanElectronic Management System (EMS) protects the machine, extends lifespan, and increases efficiencyLED battery capacity indicatorFLEX battery system: Compatible with all 12V battery packsTechnical DataMax. Polishing pad Ø: 80mmMax. Backing pad Ø: 75 mmStroke: 3 + 12 mmNo-load speed: 400-2000/-3000/-4000/-5000 rpmNo-load stroke rate: 800-4000/-6000/-8000/-11600 h/minBattery voltage: 12VBattery capacity: 2.5 / 4.0 / 6.0 AHDifferent Variants of the Flex PXE 80 Available at Chemical-Shark.deMachine only without accessories1 Flex PXE 80 mini polisher without batteries and power supplyComplete set including accessories, charger, case, batteries1 Flex PXE 80 mini polisher without batteries and power supply1 rotary adapter DT-P1 eccentric adapter 3 mm stroke DT-XF31 eccentric adapter 12 mm stroke DT-XF121 adhesive pad 30 Ø BP-M/SR D30 PXE1 hook-and-loop pad 30 Ø BP-M D30 PXE1 hook-and-loop pad 75 Ø BP-M D75 PXE2 batteries 2.5 Ah AP 12/2.51 charger CA 12/18.01 transport case L-BOXX® 1361 case insert