Boat Care – Cleaning, Polishing, and Maintenance Products for Watercraft

Our Boat Care category offers a comprehensive selection of specialized cleaners, polishes, maintenance products, and sealants for yachts, motorboats, sailboats, and all types of watercraft. The products are specifically designed to remove salt and dirt deposits, algae growth, and oxidation, restore surfaces to a shine, and provide long-lasting protection against environmental influences. With our high-quality care products for plastic, gelcoat, paint, metal, and wood, you can achieve professional results that optimally protect, care for, and enhance the appearance of your boat.

3D ACA X-TRA 500 Cutting Polish 236ml

3D Products

3D ACA X-TRA 500 Cutting Polish 236ml

3D ACA X-TRA 500 is an innovative cutting polish designed for HeavyCut and MediumCut applications. Known as 3D 500, this polish is produced by 3D Products in the USA. With 3D 500, paint defect corrections can be made in no time. The product contains advanced "Alpha Ceramic Alumina" polishing particles that allow for significantly longer working time. 3D 500 is suitable for both soft single-layer paints and hard clear coats. It is free from fillers and can be completely removed even with mild paint degreasers. High Cut and Gloss Level with 3D ACA X-TRA 500 3D 500 can be applied using rotary or eccentric machines, leaving a very glossy finish for a HeavyCut polish without hazing. Ideally, 3D 500 is used before a finishing polish such as 3D ACA X-TRA 520, 3D One Hybrid, or any comparable polish. 3D ACA 500 becomes clear after a short working time, allowing a good view of the paint surface. 3D 500 is characterized by a very long working time and is economical due to the late breaking down of the polishing particles into smaller particles. Easy to Use: 3D ACA X-TRA 500 3D 500 is solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 500 does not create dust and can be easily wiped off. It is recommended to use 3D sparingly to avoid any excess. We recommend using microfiber pads, wool pads, and hard to medium-hard foam pads with 3D. Due to its high viscosity, 3D 500 does not splash even at high RPMs.

Content: 0.236 Liter (€74.15* / 1 Liter)

€17.50*

Flex Battery Polisher Mini Polisher PXE 80 12-EC - No Batteries and Accessories

Flex

Flex Battery Polisher Mini Polisher PXE 80 12-EC - No Batteries and Accessories

FLEX PXE 80 - The Perfect Mini Polisher For rotary and eccentric free-running tasks with 3 and 12 mm stroke Flexible and easier than ever from flower grinding to hologram-free finishing with one device The ideal supplementary tool for every car detailer, painter, and spot repair area Trigger for a slow and sensitive start and lock for continuous operation Equipped with speed constant control and 4 speed settings, display easily recognizable through LEDs Perfect ergonomics and flexible grip options through optimally placed SoftGrip surfaces High running smoothness due to vibration optimization Special velcro pad for polishing and sanding With impact protection ring to protect surfaces Brushless motor for higher efficiency and longer lifespan Electronic Management System (EMS) protects the machine, extends lifespan and increases efficiency LED battery capacity indicator FLEX battery system: compatible with all 12 V battery packs Technical Data Max. Polishing pad diameter: 80mm Max. Backing pad diameter: 75 mm Stroke: 3 + 12 mm No-load speed: 400-2000/-3000/-4000/-5000 rpm. No-load stroke rate: 800-4000/-6000/-8000/-11600 Strokes/min. Battery voltage: 12V Battery capacity: 2.5 / 4.0 / 6.0 AH Different Variants of the Flex PXE 80 Available at Chemical-Shark.de Machine only without accessories 1 Flex PXE 80 Mini Polisher without batteries and power supply

€237.90*

Flex Battery Polisher Mini Polisher PXE 80 12-EC/2.5 Set

Flex

Flex Battery Polisher Mini Polisher PXE 80 12-EC/2.5 Set

Flex PXE 80 Set with AccessoriesFlex PXE 80 is the innovative mini polisher from the German manufacturer FLEX Tools. The PXE 80 can be used for polishing and sanding in both rotary and eccentric modes. The quick-change system allows for lightning-fast switching of drive types and backing pads.Special polishing pads made of microfiber and foam from the Detail Passion Pad Factory are available specifically for the PXE 80. These are listed under the "Accessories" tab below. For use with this high-performance polisher, we offer polishes from manufacturers like Meguiars, 3D Products, Sonax, Rupes, and Menzerna. We are happy to provide detailed advice.FLEX PXE 80 - The Perfect Mini PolisherFor rotary and eccentric free-running tasks with 3 and 12 mm strokeFlexible and easy like never before from bloom grinding to hologram-free finishing with one deviceThe ideal supplementary tool for any vehicle detailer, painter, and spot repair areaThrottle switch for slow and sensitive starts and locking for continuous operationEquipped with speed constant maintenance and 4 speed levels, indicated clearly by LEDsPerfect ergonomics and flexible grip options thanks to optimally placed SoftGrip surfacesHigh running smoothness due to vibration optimizationDamped special hook-and-loop pads for polishing and sandingWith protective shock ring to safeguard surfacesBrushless motor for higher efficiency and longer lifespanElectronic Management System (EMS) protects the machine, extends lifespan, and increases efficiencyLED battery capacity indicatorFLEX battery system: Compatible with all 12V battery packsTechnical DataMax. Polishing pad Ø: 80mmMax. Backing pad Ø: 75 mmStroke: 3 + 12 mmNo-load speed: 400-2000/-3000/-4000/-5000 rpmNo-load stroke rate: 800-4000/-6000/-8000/-11600 h/minBattery voltage: 12VBattery capacity: 2.5 / 4.0 / 6.0 AHDifferent Variants of the Flex PXE 80 Available at Chemical-Shark.deMachine only without accessories1 Flex PXE 80 mini polisher without batteries and power supplyComplete set including accessories, charger, case, batteries1 Flex PXE 80 mini polisher without batteries and power supply1 rotary adapter DT-P1 eccentric adapter 3 mm stroke DT-XF31 eccentric adapter 12 mm stroke DT-XF121 adhesive pad 30 Ø BP-M/SR D30 PXE1 hook-and-loop pad 30 Ø BP-M D30 PXE1 hook-and-loop pad 75 Ø BP-M D75 PXE2 batteries 2.5 Ah AP 12/2.51 charger CA 12/18.01 transport case L-BOXX® 1361 case insert

€394.90*

Flex PE 14-2 Polishflex 150mm Rotary Polisher

Flex

Flex PE 14-2 Polishflex 150mm Rotary Polisher

Flex PE 14-2 150 POLISHFLEX, polisher with variable speed and high torque Electronic Management System (EMS) protects the machine, extends its lifespan and enhances the microprocessor electronics: continuous speed selection, speed stabilization via tachogenerator, overload protection, restart safety, and temperature monitoring Powerful 1400 Watt motor with a high-performance fan for optimal cooling Throttle switch for a slow and precise start (initial speed at level 1 (380/min)) and latch for continuous operation Contents 1 handle Technical Data Max. polishing pad: Ø200 mm Max. backing pad: Ø150 mm No-load speed: 380-2100/min Power consumption: 1400 Watt Power output: 880 Watt Tool holder: M 14 Dimensions (L x H): 405 x 117mm Cable length: 4.0 m Weight: 2.3 kg

€395.00*

Details

Flex XFE 7-15 Dual Action Polisher 125/150mm (includes both backing pads)

Flex

Flex XFE 7-15 Dual Action Polisher 125/150mm (includes both backing pads)

Flex XFE 7-15 Dual Action Polisher 150mm VR microprocessor electronics: constant speed control via tachogenerator, soft start, trigger switch, restart lock after power failure, overload protection, temperature monitoring, and speed selection Free running drive for hologram-free finishing 15 mm polishing stroke for high efficiency Trigger switch for slow and sensitive start with lock for continuous operation Damped special velcro pad for polishing High running smoothness due to balancing mass Optimized air flow for best cooling of motor and gearbox. No annoying exhaust for the user Flat gear head reduces distance to surface, allowing safe operation in any position Ergonomically shaped soft grip handle for precise handling, always comfortable and secure in hand Ideal for temperature-sensitive paints due to low heat generation on the surface Free running dual action Suitable for all user types Easy handling No hologram formation Low cut performance Optimal for finishing Technical Data: Max. Polishing pad diameter 160 mm Max. Backing pad diameter 150 mm Stroke 15 mm No-load speed 1500-4500 /min No-load stroke rate 2900-8600 /min Power consumption 710 watts Power output 420 watts Dimensions (L x H) 370 x 140 mm Cable length 4.0 m Weight 2.4 kg Included: 1 special velcro pad, 150 mm Ø

€375.00*

Details

Gtechniq Bug Remover W8v2 250ml

Gtechniq

Gtechniq Bug Remover W8v2 250ml

Gtechniq Bug Remover W8v2 has been newly developed to effectively remove stubborn fly and insect residues. It is also suitable for breaking down persistent bird droppings. Bird droppings, fly, and insect residues are among the most challenging contaminants that can occur on vehicles. The hard chitin shells combined with fats, droppings, and proteins quickly form tough crusts on the vehicle's surface. With the added heat or sunlight, strong attachments and a dangerous pH level can develop rapidly. The W8v2 is unique as an insect and bug remover because it is 100% biodegradable. The modern formula allows for the removal of insect residues without relying on aggressive caustic ingredients. Please note that the new version has a pH level of 13 and is not suitable for waxed vehicles. Easily removes insect residues 100% biodegradable Safe in combination with all Gtechniq sealants New reinforced version also suitable for untreated paints

Content: 0.25 Liter (€30.00* / 1 Liter)

€7.50*

Gtechniq Bug Remover W8v2 5000ml

Gtechniq

Gtechniq Bug Remover W8v2 5000ml

Gtechniq Bug Remover W8v2 has been newly developed to effectively remove stubborn fly and insect residues. It is also suitable for loosening tough bird droppings. Bird droppings, flies, and insect remnants are among the most difficult contaminants found on vehicles. The hard chitin shells combined with fats, droppings, and proteins quickly form tough crusts on the vehicle surface. When combined with heat or sunlight, strong adhesions and a hazardous pH level can develop quickly. W8v2 is unique as an insect and bug remover, as the cleaner is 100% biodegradable. The modern formula allows for the removal of insect residues without relying on aggressive caustic ingredients. Please note that the new version has a pH level of 13 and is not suitable for waxed vehicles. Easily removes insect residues 100% biodegradable Safe in combination with all Gtechniq sealants New, reinforced version also suitable for untreated paints

Content: 5 Liter (€14.78* / 1 Liter)

€73.90*

Gtechniq Bug Remover W8v2 500ml

Gtechniq

Gtechniq Bug Remover W8v2 500ml

Gtechniq Bug Remover W8v2 has been newly developed to remove even stubborn fly and insect residues. It is also suitable for loosening stubborn bird droppings. Bird droppings, flies, and insect residues are among the most difficult contaminants to remove from vehicles. The hard chitin shells combined with fats, excrement, and proteins quickly form tough crusts on the vehicle surface. When combined with heat or sunlight, strong adhesions and a dangerous pH value can quickly develop. W8v2 is unique as an insect and mosquito remover, as the cleaner is 100% biodegradable. The modern formula allows for the removal of insect residues without relying on aggressive caustic ingredients. Note that the new version has a pH value of 13 and is not suitable for waxed vehicles. Effortlessly removes insect residues 100% biodegradable Safe in combination with all Gtechniq coatings New enhanced version also suitable for untreated paints

Content: 0.5 Liter (€23.00* / 1 Liter)

€11.50*

Gtechniq Ceramic Coating for Marine Boats and Gelcoat Top Coat 250ml

Gtechniq

Gtechniq Ceramic Coating for Marine Boats and Gelcoat Top Coat 250ml

Ceramic Top offers unparalleled dirt repulsion, shine, and surface smoothness for boats, watercraft, and other vehicles with gelcoats. It features an exceptionally strong anti-static function that helps keep surfaces dust-free, and contains a powerful UV filter to prevent premature fading. Ceramic Top forms a permanent chemical bond with the paint or the applied Gtechniq Marine Base Coat, thus providing lasting surface protection. This product is part of the new Gtechniq Marine Series for boats, private yachts, and watercraft. Unmatched dirt repulsion, shine, and surface smoothness Strong anti-static function keeps the surface dust-free Powerful UV filter prevents premature fading Suitable for boats, watercraft, and other vehicles with gelcoats Please refer to the processing and application instructions in the Application tab on this page (see below).

Content: 0.25 Liter (€1,898.00* / 1 Liter)

€474.50*

Gtechniq Ceramic Coating Marine Boat & Gelcoat Ceramic Base Coat 250ml

Gtechniq

Gtechniq Ceramic Coating Marine Boat & Gelcoat Ceramic Base Coat 250ml

Ceramic Base is a high-strength protective coating that is extremely hard and remarkably durable. It prevents scratches and holograms that can occur through cleaning and everyday use on vehicles with gelcoats. Ceramic Coat forms a permanent, chemical bond with the gelcoat and significantly enhances the gloss level and paint smoothness. This product is part of the new Gtechniq Marine Series for boats, private yachts, and water sports vehicles. High-strength protective coating for boats, yachts, water sports vehicles, and gelcoats Protection against scratches from daily use and cleaning Very high, rich gloss Please refer to the processing and application instructions in the Application tab on this page (see below).

Content: 0.25 Liter (€2,019.60* / 1 Liter)

€504.90*

Gtechniq Insect Remover Bug Remover W8v2 1000ml

Gtechniq

Gtechniq Insect Remover Bug Remover W8v2 1000ml

Gtechniq Bug Remover W8v2 wurde neu entwickelt, um auch stark festsitzende Fliegen- und Insektenreste zu entfernen. Es eignet sich auch zum Anlösen von hartnäckigem Vogelkot. Vogelkot, Fliegen- und Insektenreste zählen zu den am schwierigsten zu entfernenden Verschmutzungen, die an Fahrzeugen auftreten können. Die harten Chitinpanzer kombiniert mit Fetten, Kot und Eiweißen legen sich schnell mit harten Verkrustungen auf die Fahrzeugoberfläche. In Kombination mit Abwärme oder Sonneneinstrahlung entstehen schnell starke Anhaftungen und ein gefährlicher pH-Wert. W8v2 ist als Insekten- und Mückenlöser auch daher einmalig, da der Reiniger 100% biologisch abbaubar ist. Die moderne Formel ermöglicht das Entfernen von Insektenresten, ohne auf aggressive ätzende Inhaltsstoffe angewiesen zu sein. Beachten Sie, dass die neue Version einen pH-Wert von 13 hat und nicht für gewachste Fahrzeug geeignet ist. Entfernt mühelos Insektenreste 100% biologisch abbaubar Sicher in Kombination mit allen Gtechniq Versiegelungen Neue, verstärkte Version auch für unbehandelte Lacke geeignet

€21.90*

Gtechniq Marine Ceramic Base Coat for Boats and Gelcoats 50ml

Gtechniq

Gtechniq Marine Ceramic Base Coat for Boats and Gelcoats 50ml

Ceramic Base is a high-strength protective coating that is extremely tough and exceptionally durable. It prevents scratches and holograms that can occur from cleaning and the everyday use of vehicles with gelcoats. Ceramic Coat forms a permanent chemical bond with the gelcoat, significantly enhancing gloss and smoothness. The product is part of the new Gtechniq Marine Series for boats, private yachts, and watercraft. High-strength protective coating for boats, yachts, watercraft, gelcoats Protection against scratches from everyday use and cleaning Very high intense gloss Please refer to the processing and application instructions in the Application tab on this page (see below).

Content: 0.05 Liter (€2,150.00* / 1 Liter)

€107.50*

Gtechniq Marine Ceramic Top Coat for Boats & Gelcoats 50ml

Gtechniq

Gtechniq Marine Ceramic Top Coat for Boats & Gelcoats 50ml

Ceramic Top delivers unparalleled dirt repellency, gloss, and surface smoothness for boats, watercraft, and other vehicles with gelcoats. It features an exceptionally strong antistatic function, helping to keep surfaces dust-free, and contains a powerful UV filter to prevent premature fading. Ceramic Top forms a permanent chemical bond with the paint or the applied Gtechniq Marine Base Coat, thus providing sustainable surface protection. This product is part of the new Gtechniq Marine Series for boats, private yachts, and watercraft. Unparalleled dirt repellency, gloss, and surface smoothness Strong antistatic function keeps the surface dust-free Powerful UV filter prevents premature fading Suitable for boats, watercraft, and other vehicles with gelcoats Please refer to the processing and application instructions in the application tab on this page (see below).

Content: 0.05 Liter (€1,998.00* / 1 Liter)

€99.90*

Gtechniq Marine Glass & Plexiglass Coat – Glass Protection 250ml

Gtechniq

Gtechniq Marine Glass & Plexiglass Coat – Glass Protection 250ml

Gtechniq Marine Glass & Plexiglass Coat significantly reduces the surface energy of glass and plexiglass, causing water to form tight droplets that easily roll off the surface. This enhances visibility as water quickly runs off the surface, resulting in fewer water spots and making cleaning much easier. This product is part of the new Gtechniq Marine series for boats, private yachts, and watercraft. High water repellency sealing Improved safety through better visibility Long-lasting protection for glass, plexiglass, and Makrolon surfaces

Content: 0.25 Liter (€215.60* / 1 Liter)

€53.90*

Gtechniq Marine Glass Polish 250ml for Glass and Plexiglass

Gtechniq

Gtechniq Marine Glass Polish 250ml for Glass and Plexiglass

Gtechniq Marine Glass Polish is a water-based cleaner designed for glass and plexiglass. It features nano abrasives and citric acid to achieve a scratch-free finish. This high-performance polish effectively removes dirt and contaminants. It eliminates water spots and unwanted discoloration, leaving a crystal-clear shine and a clinically clean finish. This product is part of the new Gtechniq Marine series for boats, private yachts, and water sports vehicles. Cleaning polish for glass, plexiglass, and polycarbonate Crystal-clear shine and clean finish Ideal for marine applications

Content: 0.25 Liter (€102.00* / 1 Liter)

€25.50*

Gtechniq Marine Interior Cleaner for Watercraft 500ml

Gtechniq

Gtechniq Marine Interior Cleaner for Watercraft 500ml

Gtechniq Marine Interior Cleaner cleans in three ways. First, it contains a safe, water-based degreaser and surfactant that removes dirt and grease from any surface. Second, it includes an additive that absorbs and neutralizes odor-causing substances. Third, it features a strong antibacterial component that sustainably prevents new dirt. Gtechniq Marine Interior Cleaner can be used on any surface, including leather, Alcantara, and synthetic or natural fibers. This product is part of the new Gtechniq Marine series for boats, luxury yachts, and watercraft. Intensive cleaner for boating and water sports applications Safe to use on all surfaces Cleaning, antibacterial, and caring

Content: 0.5 Liter (€33.00* / 1 Liter)

€16.50*

Gtechniq Marine Metal Restoration Polish High-Gloss Metal Polish 250ml

Gtechniq

Gtechniq Marine Metal Restoration Polish High-Gloss Metal Polish 250ml

Gtechniq Marine Metal Restoration Polish brings a deep shine to any metal safely and easily. It can be used on steel, brass, copper, aluminum, gold, silver, and other precious metals. Since the polish contains no ammonia, harsh chemicals, or aggressive abrasives, it delivers a flawless, immaculate finish with every use. This product is part of the new Gtechniq Marine Series for boats, luxury yachts, and watercraft. Brilliant shine Flawless finish without scratches Easy to work with

Content: 0.25 Liter (€150.00* / 1 Liter)

€37.50*

Gtechniq Marine UV Wash - Specialized Shampoo with UV Protection 5000ml

Gtechniq

Gtechniq Marine UV Wash - Specialized Shampoo with UV Protection 5000ml

Gtechniq Marine UV Wash is a highly effective washing shampoo designed for use with ceramic coatings and waxes for boats and watercraft. True to its name, this shampoo is equipped with efficient UV absorption additives. Hydroxyphenyl-Triazines, or HPT, remain water-compatible on the treated surface after cleaning, protecting it from degradation and material breakdown caused by sun exposure. Highly Effective and 100% Biodegradable: Gtechniq Marine UV Wash Marine UV Wash is 100% biodegradable. It breaks the bond between dirt and the boat's surface, encapsulating dirt particles and minimizing surface scratches. Gtechniq Marine UV Wash further maximizes surface shine and creates a smooth paint finish. Gtechniq Marine is a specialized product line for boats, watercraft, and private aircraft. It is optimized for materials used in this field, such as gelcoats.

Content: 5 Liter (€23.98* / 1 Liter)

€119.90*

Gtechniq Marine UV Wash Special Shampoo with UV Protection 500ml

Gtechniq

Gtechniq Marine UV Wash Special Shampoo with UV Protection 500ml

Gtechniq Marine UV Wash is a high-performance shampoo designed for use with ceramic coatings and waxes for boats and watercraft. True to its name, this shampoo contains effective UV absorbers. Hydroxyphenyl-Triazines (HPT) remain water-compatible on the treated surface after cleaning, protecting against weathering and material degradation from sun rays. Highly Effective and 100% Biodegradable: Gtechniq Marine UV Wash Marine UV Wash is 100% biodegradable. It breaks the bond between dirt and the boat surface, encapsulating dirt particles and minimizing surface scratches. Gtechniq Marine UV Wash also maximizes surface gloss, providing a smooth finish. Gtechniq Marine is a specialized product line for boats, watercraft, and private aircraft, optimized for materials commonly used in this sector, such as gelcoats.

Content: 0.5 Liter (€33.00* / 1 Liter)

€16.50*

Gtechniq Tar and Glue Remover W7 - 500ml

Gtechniq

Gtechniq Tar and Glue Remover W7 - 500ml

Gtechniq Tar and Glue Remover W7 gently dissolves tar and adhesive, allowing for safe removal without damaging paint or coatings. W7 is formulated with modern solvents and is compatible with Gtechniq’s line of ceramic and spray coatings. It's also excellent for removing tree sap.Remover for tar, tree sap, and adhesivessafe for application on paint and coated surfacesenables highly effective, economical usage

Content: 0.5 Liter (€25.00* / 1 Liter)

€12.50*

Gtechniq Water Spot Remover W9 250ml

Gtechniq

Gtechniq Water Spot Remover W9 250ml

Gtechniq Water Spot Remover W9 is a concentrated liquid designed specifically to remove water spots and limescale, fully compatible with existing ceramic coatings from Gtechniq. Unlike typical limescale removers, W9 operates on a three-stage action concept: Dissolving and removing salts Capturing metal ions typically found in tap water Eliminating silica deposits, such as diatomaceous earth and scale Especially tough water spots and silica deposits present a significant challenge, but with W9, they can be removed effortlessly. The formula is also particularly effective on glass, where water spots are notoriously difficult to remove. W9 is suitable for all paint types, including effect and matte finishes. removes water spots and limescale safe for use on coatings can be used on all paint types, plastic, and plastic parts

Content: 0.25 Liter (€50.00* / 1 Liter)

€12.50*

Gtechniq Water Spot Remover W9 500ml

Gtechniq

Gtechniq Water Spot Remover W9 500ml

Gtechniq Water Spot Remover W9 is a concentrated liquid designed to remove water spots and limescale, fully compatible with existing Gtechniq ceramic coatings. Unlike regular limescale removers, W9 employs a three-stage action concept: Dissolving and removing salts Capturing metal ions commonly found in tap water Eliminating silica deposits, such as diatomaceous earth and scale Particularly tough water spots and silica deposits can be a challenge, but with W9, you can remove them effortlessly. The formula is also highly effective on glass, where water spots are notoriously difficult to eliminate. W9 is suitable for all paint types, including effect and matte finishes. removes water and limescale spots safe to use on coatings usable on all paint types, plastics, and plastic parts

Content: 0.5 Liter (€39.80* / 1 Liter)

€19.90*

Meguiar's Ultimate Compound Polish 450ml

Meguiars

Meguiar's Ultimate Compound Polish 450ml

Meguiar's Ultimate Compound is a cutting and polishing compound with active polishing particles that quickly removes stubborn oxidation, stains, and other paint defects. In the same process, Ultimate Compound can also polish the surface to a high gloss. It is clear coat safe, with the included micro-polishing agents delivering a clear finish free from scratches and streaks. Here, Ultimate Compound offers significant advantages over other compounds/polishes. It is perfectly suited for preparing paint for subsequent sealing. Fast and Safe ClassicCars TEST WINNER, Issue 08/14 (Polishes) can be applied by hand or with a dual action polisher easy application high gloss level with excellent abrasiveness

Content: 0.45 Liter (€46.44* / 1 Liter)

€20.90*

Optimum No Rinse ONR v5 - Version 5 - wash and shine 236ml

Optimum

Optimum No Rinse ONR v5 - Version 5 - wash and shine 236ml

Optimum No Rinse Wash & Shine is a car wash solution that can also be effectively used for motorcycles, private jets, or boats. Optimum No Rinse was specifically designed for vehicle washing without the need for rinsing the paint afterward. The polymer formula of Optimum No Rinse, commonly referred to as ONR, adheres protectively to the car's surface and wraps around dirt particles. Light dirt can therefore be removed without scratching, and the vehicle does not need to be rinsed. How to do it: Perform rinse-less car washing with Optimum No Rinse Optimum No Rinse was developed in California, where legal regulations control maximum water usage per car wash. Anyone wanting to wash their car had to do it rinseless, meaning without rinsing off the soapy water. In the "rinseless Wash" method, multiple microfiber towels soaked with Optimum No Rinse washing solution are used to wash and dry the car. To pre-treat dirt, an Optimum No Rinse solution can be sprayed beforehand. There are many methods for rinse-less washing. We recommend using two buckets, plenty of wash mitts, and drying towels with Optimum No Rinse. Differences Between Waterless and Rinseless Car Wash Fundamentally, Optimum No Rinse can also be used as a concentrate for "waterless washing". This waterless washing method does not use wash buckets. With this method, dirt is tackled only with towels and a spray cleaner. Ultimately, you should decide when to perform a full car wash, a rinseless wash, or a waterless wash. In cases of heavy dirt, a full wash with foam pre-wash, rust, and tar removal, followed by hand washing, is recommended. Light dirt can be removed waterless, while moderate dirt can be dealt with rinseless. The Big Advantage of Optimum No Rinse Car Wash Concentrate With every application, the vehicle gains a rich shine and becomes even easier to clean with repeated use due to the built-up polymer protective layer. The paint feels distinctly smoother! Versatile Use: Optimum No Rinse from the Online Shop Chemical-Shark.de ONR can be used in numerous ways. In addition to washing applications, it serves as a perfect lubricant for clay bars, a cleaning spray, or as a quick detailer for touch-ups, as well as for exterior window cleaning. It’s no surprise that Optimum No Rinse is popular among hobbyist car detailers and professional detailers alike. Optimum No Rinse is free from harmful alcohols and protects softeners in Plexiglass, Makrolon, and other polycarbonate materials. No wonder it is also used for boats and planes. Optimum No Rinse wash & shine or wash & wax When ordering Optimum No Rinse, you can choose between the wash & shine and wash & wax versions. Optimum No Rinse wash & wax is supplemented with Carnauba wax, providing a slightly stronger shine and a degree of water repellency. If the paint is protected with a high-quality paste wax such as Bilt Hamber Double Speed Wax, Zymöl Carbon, or Dodo Juice, we recommend the slightly more expensive wash & wax version. Polymer-based cleaner for low-water washing without rinsing Versatile uses as a detailer, lubricant for clay bars, or window/art glass cleaning Provides high paint smoothness, rich shine Available as pure polymer version wash & shine and Carnauba-enhanced wash & wax variant Available at Chemical-Shark.de in various sizes of 236ml, 946ml, and 3780ml gallons Tip: To optimize the cleaning performance of ONR, we recommend using it with soft water. This minimizes the risk of lime stains.

Content: 0.236 Liter (€50.42* / 1 Liter)

€11.90*

P&S Iron Buster Fallout Remover and Wheel Cleaner 3785ml

P&S Detailing Products

P&S Iron Buster Fallout Remover and Wheel Cleaner 3785ml

P&S Iron Buster is a highly effective fallout remover and wheel cleaner. With P&S Brake Buster, the family-owned company has been producing an alkaline tire and wheel cleaner for many years, and now the product range is complemented by a pH-neutral, acid-free remover for iron particles. P&S Iron Buster is part of the Double Black Collection and was developed with detailing legend Renny Doyle. Fallout and Iron Particles: Here's How to Remove These Paint Enemies and Gloss Destroyers! Even if the paint looks clean and the vehicle shows no dirt, there is a high probability that fallout and iron particles have settled on the surface. During every wash, particularly in automatic washes, there is a risk that these iron particles will be picked up during cleaning and cause scratches on the paint. A complete destruction of ceramic coatings and other paint seals is possible. With Iron Buster, fallout and iron particles can be removed as easily as securely. Color Change Indicator from Gold to Purple-Red Signals Iron Particles Reliably! Iron Buster has a golden-yellow color. The product is ready to use but can also be diluted. Once Iron Buster is sprayed on, it begins to dissolve iron particles and fallout from the vehicle's surface, indicating this with a color change to purple-red. Iron Buster can thus also be used as an indicator if you are unsure whether fallout is present. Chemical-Shark.de Recommendation: Check for Fallout Every 2 Months! We recommend testing for fallout every 2 months for a daily driven vehicle. Our application guide explains the procedure.

Content: 3.785 Liter (€18.47* / 1 Liter)

€69.90*

P&S Iron Buster Iron Remover & Wheel Cleaner 473ml

P&S Detailing Products

P&S Iron Buster Iron Remover & Wheel Cleaner 473ml

P&S Iron Buster is a highly effective iron remover and wheel cleaner. The family-owned company has been producing an alkaline tire and wheel cleaner with P&S Brake Buster for many years, and now the product range is complemented by a pH-neutral and acid-free remover for iron particles. P&S Iron Buster is part of the Double Black Collection and was developed in collaboration with detailing legend Renny Doyle. Remove Rail Dust and Iron Particles: Protect Your Paint! Even if the paint looks clean and the vehicle shows no visible dirt, there is a high probability that rail dust and iron particles have settled on the surface. With every car wash, especially in automatic wash systems, there is a risk that these iron particles are picked up during cleaning, causing scratches on the paint. Complete destruction of ceramic coatings and other paint sealants is possible. With Iron Buster, rail dust and iron particles can be removed easily and safely. Color Indicator from Gold to Purple-Red Shows Iron Particles! Iron Buster has a golden yellow color. The product is ready to use but can also be diluted. Once Iron Buster is sprayed on, it begins to dissolve iron particles and rail dust from the vehicle surface, indicating this by changing color to purple-red. Iron Buster can thus also be used as an indicator if you are unsure whether rail dust is present. Chemical-Shark.de Recommendation: Check for Rail Dust Every 2 Months! We recommend checking for rail dust particles every 2 months for daily-driven vehicles. Our application guide explains the procedure.

Content: 0.473 Liter (€39.96* / 1 Liter)

€18.90*

Petzoldt's Magic Clean Hard Red Clay Bar 100g

Petzoldts

Petzoldt's Magic Clean Hard Red Clay Bar 100g

The original Petzoldt's MAGIC-Clean clay bar® is a well-established term in modern car care for the gentle cleaning of paint surfaces before polishing or waxing. To get straight to the point, we always recommend performing at least one polishing step with a medium polish after using the clay bar. With the MAGIC-Clean clay, you can remove paint mist, color mist, industrial deposits, rust particles, dried tree sap, insect residue, tar, and deposits from acid rain, hard water stains, brake dust, and iron particles. Optimized Polishing Results through Deep Cleaning Before Polishing For a perfect polishing result, it is essential to thoroughly pre-clean the paint. Deep cleaning is safely achievable using MAGIC-Clean clay in combination with a paint cleaner that provides good cleaning performance and gliding properties. For Petzoldt's clay bar, we recommend the Paint Gloss cleaner by P&S, Optimum No Rinse wash & shine, or CarPro Ech2O. Conventional cleaners or car shampoos are unsuitable as paint cleaners in combination with clay, as they can leave a film on the surface. Powerful Against Stubborn Contaminations - Petzoldt's Red MAGIC-Clean Clay Bar Petzoldt's MAGIC-Clean clay is available in several abrasiveness levels. The blue MAGIC-Clean is ideal for medium contamination and paint deposits, while the red variant is sharper and harder, and the white variant is specifically designed for highly sensitive paints. The Red MAGIC-Clean Clay Bar from Petzoldt's High-quality hard (sharp) clay for medium attachments Ideal for deep paint cleaning Original Petzoldt's MAGIC-Clean Perfect in combination with P&S Paint Gloss, Optimum No Rinse, and CarPro Ech2O as a lubricant Gentle cleaning of deposits, insect residues, hard water stains, tar, etc. Follow application recommendations Available in 100g or 200g packs

Content: 0.1 Kilogramm (€129.50* / 1 Kilogramm)

€12.95*

Petzoldt's Magic Clean Medium Blue Detailing Clay 100g

Petzoldts

Petzoldt's Magic Clean Medium Blue Detailing Clay 100g

In modern car detailing is the original Petzoldt's MAGIC-Clean Detailing Clay® a renowned term for gentle cleaning of paint surfaces before polishing or applying waxes. To get straight to the point, we always recommend performing at least one polishing step with a medium polish after using detailing clay. With the MAGIC-Clean Detailing Clay, you can effectively remove paint overspray, color spray, industrial deposits, surface rust, dried tree sap, insect residues, tar, and deposits from acid rain, limescale, brake dust, and iron particles. Optimized Polishing Results Through Deep Cleaning Before Polishing To achieve perfect polishing results, it is essential to pre-clean the paint intensively. Deep cleaning is safely achievable with the MAGIC-Clean Detailing Clay in combination with a paint cleaner that provides good cleaning power and glide. For Petzoldt's clay, we recommend the Paint Gloss from P&S, Optimum No Rinse Wash & Shine, or CarPro Ech2O. Conventional cleaners or car shampoos are unsuitable as paint cleaners in conjunction with detailing clay, as they can leave a greasy film. Gentle Yet Powerful - MAGIC-Clean Detailing Clay Blue from Petzoldt's Petzoldt's MAGIC-Clean Detailing Clay is available in several abrasiveness levels. The blue MAGIC-Clean is ideal for moderate dirt and paint deposits, while the red variant is sharper and harder, and the white variant is specially developed for highly sensitive paint surfaces. The Blue MAGIC-Clean Detailing Clay from Petzoldt's High-quality medium detailing clay for moderate attachments Ideal for deep paint cleaning Original Petzoldt's MAGIC-Clean Perfectly paired with P&S Paint Gloss, Optimum No Rinse, and CarPro Ech2O as a glide aid Gentle cleaning of deposits, insect residues, limescale, tar, etc. Follow application recommendations Available in 100g or 200g packs in a box

Content: 0.1 Kilogramm (€129.50* / 1 Kilogramm)

€12.95*

Petzoldt's MAGIC-Clean Mild Cleaning Clay White 100g

Petzoldts

Petzoldt's MAGIC-Clean Mild Cleaning Clay White 100g

In modern car care, the original Petzoldt's MAGIC-Clean Cleaning Clay® is a well-known term for the gentle cleaning of paints before polishing or applying waxes. To put it upfront, we always recommend at least one polishing step with a medium polish after using cleaning clay. With the MAGIC-Clean Cleaning Clay, you can remove paint mist, color mist, industrial deposits, surface rust, dried tree sap, insect residues, tar, and residues from acid rain, lime spots, brake dust, and iron particles. Optimized Polishing Results Through Deep Cleaning Before Polishing To achieve a perfect polishing result, it's essential to thoroughly pre-clean the paint. Deep cleaning is possible with the MAGIC-Clean Cleaning Clay in combination with a paint cleaner that offers good cleaning performance and glide. For Petzoldt's cleaning clay, we recommend the Paint Gloss cleaner from P&S, Optimum No Rinse wash & shine, or CarPro Ech2O. Conventional cleaners or car shampoos are unsuitable as paint cleaners in conjunction with cleaning clay, as they can leave a lubricating film. Mild, Ideal for Sensitive Paints - MAGIC-Clean Cleaning Clay White from Petzoldt's Petzoldt's MAGIC-Clean Cleaning Clay is available in several abrasiveness levels. The blue MAGIC-Clean is ideal for medium dirt and paint deposits; the red variant is sharper and harder, while the white version is specifically designed for highly sensitive paints. The Blue MAGIC-Clean Cleaning Clay from Petzoldt's Mild cleaning clay for sensitive paints (uni black, classic cars, paints without clear coat) Ideal for deep paint cleaning Original Petzoldt's MAGIC-Clean Ideal in combination with P&S Paint Gloss, Optimum No Rinse, and CarPro Ech2O as a lubricant Gentle cleaning of deposits, insect residues, lime spots, tar, etc. Follow application recommendations 100g pack in box

Content: 0.1 Kilogramm (€129.50* / 1 Kilogramm)

€12.95*

Rupes 150mm Wool Polishing Pad for Gelcoats HeavyCut Rotary Ø 155/200mm

RUPES

Rupes 150mm Wool Polishing Pad for Gelcoats HeavyCut Rotary Ø 155/200mm

The Rupes Wool Polishing Pad is specifically designed for working on gelcoats and buffing paint on boats, watercraft, and aircraft. It is meant for rotary processing with machines like the Rupes LH19E or Flex PE 14-2. Made entirely from premium lambswool! 100% natural lambswool without synthetic additives Extremely abrasive for rotary polishers like Rupes LH19 and Flex PE 14-2 150mm hook-and-loop attachment with damping layer Ideal for heavily weathered paints, gelcoats, and buffing paints Fiber length of 35mm for optimal cooling Dyed blue-white and steam-treated, thus no color bleeding Perfect for HeavyCut polishes like Rupes XC-1, 3D ACA 510, 3D ACA 500

€14.90*

Details

Rupes Marine and Gelcoat Polish One Step XC-2 1000ml

RUPES

Rupes Marine and Gelcoat Polish One Step XC-2 1000ml

Rupes XC-2 XTRA CUT COMPOUND is universally compatible with all machine movements, including dual-action and rotary polishers. This new formula is specifically designed for the quick removal of defects on gelcoat and other high-solid industrial paints, countertops, hard coatings, and in the aerospace industry. The newly developed XC-2 polish replaces the existing XC-1 with a host of benefits. Faster defect removal Improved finish and optimized clarity Superior performance on hard surfaces Better emulsion for easy wiping Water-based formula White color

€52.50*

SONAX PROFILINE CutMax 6-4 Aggressive Cutting Paste 250ml

Sonax

SONAX PROFILINE CutMax 6-4 Aggressive Cutting Paste 250ml

Highly abrasive cutting paste that removes scratches and inclusions from repaired or original factory paintwork. Leaves minimal processing marks and almost no polishing residues. Easy to use. High material removal with minimal matting. Removes sanding marks from P1000 sandpaper. Strong cutting polish for rotary and eccentric use Removes sanding marks up to P1000 and finer Ideal for severe paint defects Minimal matting with maximum removal

Content: 0.25 Liter (€79.60* / 1 Liter)

€19.90*

SONAX PROFILINE CutMax 6-4 Aggressive Polish 1000ml

Sonax

SONAX PROFILINE CutMax 6-4 Aggressive Polish 1000ml

High-abrasive polishing paste that removes scratches and inclusions from repaired parts or original factory paints. Leaves minimal processing marks and nearly no polishing residues. Easy to work with. High material removal with minimal dulling. Removes sanding marks from P1000 sandpaper. Strong cutting polish for rotary and eccentric use Removes sanding scratches up to P1000 and finer Ideal for severe paint defects Minimal dulling with maximum material removal

€60.90*

SONAX PROFILINE EXCut 05-05 High Performance Polishing Compound for Dual Action 250ml

Sonax

SONAX PROFILINE EXCut 05-05 High Performance Polishing Compound for Dual Action 250ml

Abrasive polishing compound for dual action polishing to remove scratches or locally sanded paint layers. High material removal rate combined with excellent gloss finish. Eliminates deep scratches and etching from bird droppings, insects, and tree sap. Removes sanding marks up to P1500. Powerful dual action polish with high cut rate Removes sanding marks up to P1500 and finer Ideal for severe paint defects Compatible with foam and microfiber pads

Content: 0.25 Liter (€75.60* / 1 Liter)

€18.90*

SONAX PROFILINE ExCut 05-05 High-Performance Polishing Paste for Dual Action 1000ml

Sonax

SONAX PROFILINE ExCut 05-05 High-Performance Polishing Paste for Dual Action 1000ml

High abrasive polishing paste for dual action processing to grind down scratched or locally sanded paint layers. Strong material removal while achieving high gloss. Eliminates deep scratches as well as etchings from bird droppings, insects, and tree sap. Removes sanding marks up to P1500. Powerful dual action polish with high material removal Removes sanding marks up to P1500 and finer Ideal for severe paint defects Compatible with foam and microfiber pads

€40.90*

SONAX PROFILINE Ultimate Cut 6-3 High-Performance Cutting Paste 1000ml

Sonax

SONAX PROFILINE Ultimate Cut 6-3 High-Performance Cutting Paste 1000ml

High-effective cutting polish designed for high processing speeds, featuring ultra-pure, extremely hard aluminum oxide. Faster with a large processing window. Removes scratches down to P800. Extreme, fast-cutting polish for rotary and eccentric use Removes scratches down to P800 and finer Ideal for severe paint defects Large processing window

€69.50*

SONAX PROFILINE Ultimate Cut 6-3 High-Performance Grind Paste 250ml

Sonax

SONAX PROFILINE Ultimate Cut 6-3 High-Performance Grind Paste 250ml

Highly effective grinding polish for high process speeds, contains pure, extremely hard aluminum oxide. Even faster, large processing window. Removes scratches up to P800. Extreme, fast-cutting polish for rotary and eccentric use Removes scratches up to P800 and finer Ideal for severe paint defects Large processing window

Content: 0.25 Liter (€95.60* / 1 Liter)

€23.90*

Details

Boat Care – Cleaning, Polishing, and Maintenance Products for Watercraft

Filter products