Foam Cannons – Perfect Pre-Wash with MTM Hydro and Detail Passion

Loxeal 53-14 is a medium-strength sealing liquid for hydraulic and pneumatic connections. The anaerobic thread sealant is officially approved according to DVGW for gas. This sealing compound is suitable for high-pressure cleaner adaptations. It is resistant to heat, corrosion, shocks, and vibrations. Even at low tightening torque, immediate sealing is achieved. The product is recommended for self-installation of MTM Hydro adaptations for high-pressure cleaners and replaces conventional sealing with Teflon tape. Sealing compound for medium-strength connections Ideal for threads of water, gas, hydraulic Size of your choice

DP Pro high-pressure cleaner components are designed for safe operation and manufactured with the utmost care. They can be used with MTM Hydro spray guns, cleaning lances, and foam lances, but are also suitable for adapting products from other manufacturers such as Kärcher, Nilfisk, and Kränzle. If the foam produced by the foam lance is too watery, it may be due to the nozzle's large inlet. With MTM Hydro PF22, PF22.2, and also with many other brands, it is possible to change the nozzle. Usually, a nozzle with 1.25mm is installed as standard. DP Pro nozzles with 1.1mm and 1.2mm reduce the inlet size and thus provide a stronger foaming action, resulting in denser and thicker foam. As a rough guideline, it is suggested that below 100 bar a smaller nozzle should be used. DP Pro Foam Nozzle 1.1mm for PF22 PF22.2 Foam Cannon for MTM Hydro 1.1mm nozzle for foam lances Replacement or modification for foam lance Made from brass

DP Pro high-pressure cleaner components are designed for safe operation and crafted with the utmost care. They can be used with MTM Hydro spray guns, cleaning wands, and foam lances, and are also suitable for adapting products from other manufacturers such as Kärcher, Nilfisk, and Kränzle. If the foam formation of the foam lance is too watery, it may be due to the oversized inlet of the nozzle. With MTM Hydro PF22, PF22.2 and many other brands, it is possible to change the nozzle. Generally, a 1.25mm nozzle is installed as standard. DP Pro nozzles with 1.1mm and 1.2mm narrow the inlet and thus ensure stronger foaming; the foam becomes denser and thicker. As a rough guideline, it can be said that below 100 bar a smaller nozzle should be used. DP Pro Foam Nozzle 1.1mm for PF22 PF22.2 Foam Cannon for MTM Hydro 1.2mm nozzle for foam lances For foam lance as a replacement or modification Made of brass

GHF1 Foam Sprayer – Perfect Foam Cleaning Without High Pressure The GHF1 Foam Sprayer from MTM Hydro is the ideal solution for anyone who wants to foam their vehicle gently and effectively – without the need for a high-pressure cleaner. Thanks to its innovative design, the foam sprayer connects directly to a garden hose and allows for even foam distribution for a gentle clean. Gardena Coupler Included – Easy Application Guaranteed The GHF1 comes standard with a Gardena Coupler, ensuring a secure and tight connection to the garden hose. This makes the application particularly simple: connect the hose, fill with cleaning solution, and get started right away. Who is the GHF1 Foam Sprayer Right For? This low-pressure foam sprayer is perfect for: Vehicle owners looking to wash their cars, motorcycles, bicycles, boats, or aircraft gently Users without high-pressure cleaners who still want to enjoy cleaning foam Anyone who values gentle and even foam distribution to avoid damaging sensitive surfaces Technical Highlights of the GHF1 Foam Sprayer With the GHF1, MTM Hydro introduces its first low-pressure foam sprayer for garden hoses. The robust, impact-resistant plastic body is made from a single piece for maximum durability. The adjustable air inlet allows for customizable foam density – for cleaning tailored to individual needs. Another highlight is the included MTM Hydro Adaptable Wide Mouth Bottle. This 1-liter bottle stands stable on flat surfaces and features a scale for precise dilution of cleaning agents. Product Benefits at a Glance: Low-pressure foam sprayer, ideal for Gardena connections Simple connection via 1/2 inch internal thread Adjustable dosing of foam via practical control knob Perfect for caravans, bicycles, motorcycles & sensitive surfaces where high pressure is unsuitable Flexibility Through Variable Connections The GHF1 Foam Sprayer can be operated in two ways: Via the 1/2 inch internal thread to connect with various hoses or adapters By using the included Gardena Coupler for quick and easy connection to the garden hose This makes the GHF1 perfect for anyone wanting effective foam cleaning with minimal water pressure – be it for cars, motorcycles, bicycles, or RVs. Especially practical: its gentle application ensures that even sensitive surfaces can be cleaned safely, without pressurized water penetrating or damaging paint and seals. Conclusion: High-Quality Foam Cleaning Made Easy With the MTM Hydro GHF1 Foam Sprayer, vehicle care has never been easier. The combination of low-pressure technology, robust construction, and flexible connection options makes it the perfect companion for gentle cleaning without a high-pressure cleaner. Try it now and benefit from gentle yet thorough foam cleaning!

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, made in Italy. The lance can be used with up to 200 bar and a water flow of 11.5 l/min. With a tank volume of 1000 ml, the MTM PF22.2 has a larger capacity than most foam cannons from other manufacturers. Foam generation and dispensing occur through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.2 offers a variety of adjustment options, allowing you to set the spray angle from round to flat, the direction of the flat spray horizontally or vertically, and the concentration of the water/chemical mixture. The MTM Hydro PF22.2 is a tilt-proof design and an advancement over the PF22. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive product research and intensive testing, we proudly present the MTM Hydro PF22.2, the first product from this Italian manufacturer of pressure washer technology in our range. The MTM Hydro PF22.2 meets all practical requirements we consider essential. With suitable adapters, which we will continue to expand, the MTM Hydro can be adapted to most hobby and professional segment pressure washers. The MTM Hydro PF22.2 delivers excellent foam formation even with thinner APC cleaners and can thus be used universally. Even with a low concentration, the PF22.2 foam lance perfectly foams the mixture, allowing for economical and environmentally friendly vehicle cleaning. The MTM Hydro PF22.2 has proven itself in our tests due to the quality and craftsmanship of the materials, which are of the highest standard and thus superior to Asian imitations. And if anything breaks or wears out, we supply the appropriate spare parts. Various Versions of the PF22.2 Foam Lance from MTM Hydro The MTM Hydro comes pre-assembled with various adapters and is ready for use or can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we are happy to assist. High-quality foam lance made in Italy Patented technology for foam generation Tilt-proof with filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for high-pressure cleaners, manufactured in Italy. The lance can be used at up to 200 bar with a water flow rate of 11.5 l/min. With a tank volume of 1,000 ml, the MTM PF22.2 can hold more than most foam cannons from other manufacturers. Foam generation and delivery occur through flow and suction via the foam head made from brass and stainless steel. The MTM Hydro PF22.2 offers a range of adjustment options, allowing you to set the spray from round to flat, adjust the direction of the flat spray horizontally or vertically, and control the concentration of the water/chemical mixture. The MTM Hydro PF22.2 is designed to be tip-resistant as an evolution of the PF22. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive product research and rigorous testing, we are pleased to welcome the MTM Hydro PF22.2 as the first product from the Italian manufacturer of high-pressure cleaning technology to our range. The MTM Hydro PF22.2 meets all practical requirements that we consider essential. With compatible adapters, which we will extend, the MTM Hydro can be adapted to most high-pressure cleaners in both hobby and professional segments. The MTM Hydro PF22.2 produces excellent foam even with thin liquid APC cleaners, making it universally applicable. Even at lower concentrations, the PF22.2 foam lance foams the mixture perfectly, allowing for economical and eco-friendly vehicle cleaning. The MTM Hydro PF22.2 has also proven itself in our tests due to the high quality and craftsmanship of the materials, superior to Asian imitations. And should something break or wear out, we carry the appropriate spare parts. Various Versions of the PF22.2 Foam Lance from MTM Hydro The MTM Hydro is available pre-assembled with various adapters and ready for use, or it can be adapted via 1/4 screw thread. If you have questions about the right adapter, we are happy to assist. High-quality foam lance from Italian production Patented foam generation technology Tip-resistant with filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, made in Italy. The lance can withstand up to 200 bar of pressure and a water flow rate of 11.5 l/min. With a tank capacity of 1,000 ml, the MTM PF22.2 holds more than most foam cannons by other manufacturers. Foam generation and delivery operate via flow and suction through the brass and stainless steel foam head. The MTM Hydro PF22.2 offers a variety of adjustment options, allowing the spray pattern to be adjusted from round to flat, the direction of the flat jet to be set horizontally or vertically, and the concentration of the water/chemical mix to be controlled. The MTM Hydro PF22.2 is a robust upgrade of the PF22 model. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive product research and intense testing, we proudly introduce the MTM Hydro PF22.2, the first product from this Italian manufacturer of pressure washer technology in our range. The MTM Hydro PF22.2 meets all practical demands we consider vital. With compatible adapters, which we will continue to expand, the MTM Hydro can be adapted to most pressure washers in both hobby and professional segments. The MTM Hydro PF22.2 delivers excellent foam even with low-viscosity APC cleaners, making it universally applicable. Even at lower concentrations, the PF22.2 foam lance perfectly generates foam, enabling a resource-efficient and eco-friendly vehicle cleaning experience. The MTM Hydro PF22.2 has proven its worth in our tests, thanks to the high quality and craftsmanship of the materials, surpassing Asian imitations. Additionally, should any part break or wear out, we offer the corresponding spare parts. Different Versions of the Foam Lance PF22.2 by MTM Hydro The MTM Hydro comes ready-to-use with various mounted adapters or can be adapted via a 1/4” screw thread. If you have questions about the correct adapter, we are happy to assist. High-quality foam lance from Italian production Patented foam generation technology Tilt-proof with a filling scale Various adapters for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers made in Italy. This lance can be used with pressure up to 200 bar and a flow rate of 11.5 l/min. With a tank capacity of 1,000 ml, it holds more than most foam cannons from other manufacturers. The foam generation and dispensing occur through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.2 offers a variety of settings, allowing adjustment of the spray style from round to flat, the direction of the flat spray horizontally or vertically, and the concentration of the water/chemical mixture. The PF22.2 has been designed to be tip-resistant as an advanced version of the PF22. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive product research and testing, we welcome the MTM Hydro PF22.2 as the first product from this Italian manufacturer of pressure washer technology into our range. The MTM Hydro PF22.2 meets all practical requirements we consider essential. With compatible adapters that we will continue to expand, the MTM Hydro can be adapted to most hobby and professional pressure washers. The MTM Hydro PF22.2 produces excellent foam even with low-viscosity APC cleaners and can thus be used universally. Even at low concentrations, the PF22.2 foam lance produces perfect foam, allowing for economical and eco-friendly vehicle cleaning. The MTM Hydro PF22.2 has proven successful in our tests due to the quality and finish of the materials being of the highest standard, thus superior to Asian imitations. And should something break or wear out, we have the appropriate replacement parts available. Different Versions of the PF22.2 Foam Lance by MTM Hydro The MTM Hydro comes pre-assembled and ready to use with various adapters or can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we are happy to assist. High-quality foam lance from Italian production Patented foam generation technology Tip-resistant with filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher

Die MTM Hydro PF22.2 ist eine professionelle Schaumkanone für Hochdruckreiniger aus italienischer Produktion. Die Lanze kann mit bis zu 200 bar und einem Wasserdurchfluss von 11,5 l/min verwendet werden. Mit einem Tankvolumen von 1.000 ml fast der Behälter der MTM PF22.2 mehr, als die meisten Schaumkanonen anderer Hersteller. Die Schaumerzeugung und der Abgabe erfolgt mittels Durchfluss und Ansaugung durch den aus Messing- und Edelstahl gefertigte Schaumkopf. Die MTM Hydro PF22.2 verfügt über eine Vielzahl von Einstellmöglichkeiten. So lassen sich der Sprühstahl von rund zu flach, die Richtung des Flachstrahls horizontal oder vertikal und die Konzentration des Wasser-/Chemiegemischs einstellen. Die MTM Hydro PF22.2 ist als Weiterentwicklung der PF22 kippsicher konstruiert. Perfekter Schaum für Autopflege & Detailing: MTM Hydro PF22.2 bei Chemical-Shark.de Nach umfangreicher Produkterecherche und intensiven Tests können wir mit der Aufnahme der MTM Hydro PF22.2 das erste Produkte des italienischen Herstellers für Hochdruckreiniger-Technik in unserem Sortiment begrüßen. Die MTM Hydro PF22.2 erfüllt alle praktischen Anforderungen, die wir als wesentlich erachten. Mit passenden Adaptern, die wir noch erweitern werden, kann die MTM Hydro an die meisten Hochdruckreiniger des Hobby- und Profisegments adaptiert werden. Die MTM Hybro PF22.2 liefert ein hervorragendes Schaumbild selbst bei dünnflüssigen APC-Reinigern und kann somit universell eingesetzt werden. Selbst bei geringer konzentration schäumt die PF22.2 Schaumlanze den Schaum perfekt auf und ermöglicht somit eine sparsame und umweltfreundliche Fahrzeugreinigung. Die MTM Hydro PF22.2 hat sich auch deshalb in unseren Tests bewährt, weil die Qualität und Verarbeitung der Materialien auf höchstem Niveau ist und somit asiatischen Plagiaten überlegen ist. Und sollte mal was kaputt gehen bzw. unter Verschleiß leiden, so führen wir die passenden Ersatzteile. Verschiedene Ausführung der Schaumlanze PF22.2 von MTM Hydro Die MTM Hydro ist mit verschiedenen Adaptern fertig montiert und einsatzbereit lieferbar oder kann selbst mittels 1/4 Schraubgewinde adaptiert werden. Bei Fragen zum richtigen Adapter sind wir gerne behilflich. Hochwertige Schaumlanze aus italienischer Produktion Patentierte Technologie zur Schaumerzeugung Kippsicher mit Skala zur Befüllung Verschiedene Adaptionen für Kränzle, Nilfisk und Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for high-pressure cleaners, made in Italy. The lance can be used with up to 200 bar and a flow rate of 11.5 l/min. With a tank volume of 1,000 ml, the MTM PF22.2 holds more than most foam cannons from other manufacturers. The foam generation and dispensing occur through flow and suction using a brass and stainless steel foam head. The MTM Hydro PF22.2 features a variety of adjustable settings. You can modify the spray pattern from round to flat, adjust the direction of the flat spray horizontally or vertically, and control the concentration of the water/chemical mixture. The MTM Hydro PF22.2 is designed to be tilt-proof as an evolution of the PF22. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive product research and intense testing, we proudly welcome the MTM Hydro PF22.2, the first product from this Italian manufacturer of high-pressure cleaner technology in our range. The MTM Hydro PF22.2 meets all practical requirements deemed essential. With compatible adapters, which we will continue to expand, the MTM Hydro can be adapted to most hobby and professional high-pressure cleaners. The MTM Hydro PF22.2 delivers excellent foam quality even with low-viscosity APC cleaners, making it versatile. Even at low concentration, the PF22.2 foam lance perfectly generates foam, allowing for economical and environmentally friendly vehicle cleaning. The MTM Hydro PF22.2 has proven itself in our tests due to the top-quality materials and craftsmanship, surpassing Asian knock-offs. And should something break or wear out, we offer the necessary replacement parts. Various Versions of the MTM Hydro PF22.2 Foam Lance The MTM Hydro is available pre-assembled with various adapters and ready for use, or can be adapted yourself using a 1/4 screw thread. If you have questions about the correct adapter, we are happy to assist you. High-quality foam lance from Italian production Patented technology for foam generation Tilt-proof with filling scale Various adapters for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, proudly made in Italy. This lance can operate at up to 200 bar with a flow rate of 11.5 l/min. With a tank capacity of 1,000 ml, the MTM PF22.2's container holds more than most foam cannons from other manufacturers. Foam generation and delivery is facilitated through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.2 offers a variety of adjustable settings, allowing users to customize the spray pattern from round to flat, adjust the direction of the flat spray horizontally or vertically, and control the concentration of the water/chemical mixture. The MTM Hydro PF22.2 is a tilt-proof advancement of the PF22 design. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive product research and rigorous testing, we welcome the MTM Hydro PF22.2, the first product from this Italian manufacturer of pressure washer technology to our range. The MTM Hydro PF22.2 meets all practical requirements that we deem essential. With compatible adapters, which we will continue to expand, the MTM Hydro can be adapted to most pressure washers in both hobby and professional segments. The MTM Hydro PF22.2 produces excellent foam even with low-viscosity APC cleaners, making it universally applicable. Even at low concentrations, the PF22.2 foam lance creates perfect foam, allowing for efficient and eco-friendly vehicle cleaning. The MTM Hydro PF22.2 has proven itself in our tests due to its superior quality and material processing, outclassing Asian imitations. Should anything break or wear out, we offer the suitable spare parts. Different Variants of the MTM Hydro PF22.2 Foam Lance The MTM Hydro comes ready to use with various pre-installed adapters or can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we're happy to assist. High-quality foam lance from Italian production Patented foam generation technology Tilt-proof with a filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher

The MTM Hydro PF22.2 is a professional foam cannon for pressure washers, produced in Italy. The lance can be used with up to 200 bar and a water flow rate of 11.5 l/min. With a tank capacity of 1,000 ml, the MTM PF22.2 holds more than most foam cannons from other manufacturers. Foam generation and dispensing are achieved through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.2 offers multiple adjustment options. The spray pattern can be adjusted from round to flat, the direction of the flat spray can be set horizontally or vertically, and the concentration of the water/chemical mixture can be customized. The MTM Hydro PF22.2 is designed to be tip-proof as an advanced version of the PF22. Perfect Foam for Car Care & Detailing: MTM Hydro PF22.2 at Chemical-Shark.de After extensive product research and intensive testing, we are excited to welcome the MTM Hydro PF22.2, the first product from the Italian manufacturer of pressure washer technology, to our range. The MTM Hydro PF22.2 meets all the practical requirements we consider essential. With suitable adapters, which we will continue to expand, the MTM Hydro can be adapted to most pressure washers in both hobby and professional segments. The MTM Hydro PF22.2 delivers excellent foam quality even with thin APC cleaners, making it universally applicable. Even at low concentrations, the PF22.2 foam lance perfects the foam and thus enables economical and environmentally friendly vehicle cleaning. The MTM Hydro PF22.2 has also proven itself in our tests because the quality and craftsmanship of the materials are of the highest standard, making it superior to Asian imitations. And should something break or wear out, we have the suitable spare parts available. Different Versions of the PF22.2 Foam Lance from MTM Hydro The MTM Hydro comes fully assembled and ready for use with various adapters or can be adapted using a 1/4 inch thread. If you have questions about the correct adapter, we are happy to assist. High-quality foam lance made in Italy Patented technology for foam generation Tip-proof design with filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon made in Italy for pressure washers. It can be used with up to 200 bar and a water flow rate of 11.5 l/min. With a tank volume of 1,000 ml, it holds more than most foam cannons from other manufacturers. Foam generation and discharge occur through a brass and stainless steel foam head via flow and suction. The MTM Hydro PF22.3 offers numerous adjustable options. You can set the spray pattern from round to flat, adjust the direction of the flat spray either horizontally or vertically, and control the concentration of the water/chemical mixture. The MTM Hydro PF22.3 is a further development from the PF22.2 featuring a large filling opening. An upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro comes ready to use with various adapters or can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. Various Versions of the MTM Hydro PF22.3 Foam Lance The MTM Hydro is available ready to use with various adapters or can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we are happy to assist. High-quality foam lance made in Italy Patented foam generation technology Stable design with scale for filling Various adaptations for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024 !!! Originally, MTM Hydro did not plan to produce the so-called Wide Mouth. The "inventor" of the PF22.2 was - as far as we know - the US importer, who developed a corresponding retrofit kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (i.e., low pressure). At our urging, Italy's friends eventually made this an official MTM Hydro product, resulting in the PF22.3 and its offered upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon made in Italy for high-pressure cleaners. It can be used with up to 200 bar and a water flow of 11.5 l/min. With a tank capacity of 1,000 ml, the MTM PF22.3 holds more than most foam cannons from other manufacturers. Foam generation and dispensing occur through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.3 offers a variety of adjustment options. You can set the spray pattern from round to flat, adjust the direction of the flat spray horizontally or vertically, and control the concentration of the water/chemical mixture. The MTM Hydro PF22.3 is an upgraded version of the PF22.2, designed with a large filling opening. An upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro comes fully assembled with various adapters, ready for use or can be adapted by yourself using a 1/4-inch screw thread. If you have questions about the correct adapter, we are happy to assist. Various Versions of the MTM Hydro PF22.3 Foam Lance The MTM Hydro comes fully assembled with various adapters, ready for use or can be adapted by yourself using a 1/4-inch screw thread. If you have questions about the correct adapter, we are happy to assist. High-quality foam lance made in Italy Patented foam generation technology Tip-proof with filling scale Various adapters for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024!!! MTM Hydro originally didn't intend to produce the so-called Wide Mouth. The "inventor" of the PF22.2 was - as far as we know - the US importer, who developed a corresponding retrofit kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (low pressure). At our urging to make this an official MTM Hydro product, our Italian friends complied, resulting in the PF22.3 and the offered upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon for high-pressure cleaners made in Italy. The lance can be used with up to 200 bar and a water flow of 11.5 l/min. With a tank volume of 1,000 ml, it holds more than most foam cannons from other manufacturers. Foam generation and dispensing occurs through flow and suction using the brass and stainless steel foam head. The MTM Hydro PF22.3 offers a variety of settings, allowing you to adjust the spray pattern from round to flat, change the direction of the flat spray horizontally or vertically, and set the concentration of the water/chemical mixture. The MTM Hydro PF22.3 is an improved version of the PF22.2 with a large filling opening. An upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro comes ready to use with various adapters or can be adapted using a 1/4 screw thread. For questions regarding the right adapter, we are happy to assist. Various Versions of the PF22.3 Foam Lance from MTM Hydro The MTM Hydro comes ready to use with various adapters or can be adapted using a 1/4 screw thread. For questions regarding the right adapter, we are happy to assist. High-quality foam lance made in Italy Patented foam generation technology Tip-resistant with a scale for filling Various adapters for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024!!! Actually, MTM Hydro didn't intend to produce the so-called Wide Mouth. The "inventor" of the PF22.2 was - as far as we know - the US importer, who developed a corresponding retrofit kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (i.e., low pressure). Following our insistence to make this an official MTM Hydro product, our Italian friends then complied, resulting in the PF22.3 and the offered upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon for pressure washers, produced in Italy. The lance can be used with up to 200 bar and a water flow of 11.5 l/min. With a tank volume of 1,000 ml, the MTM PF22.3 holds more than most foam cannons from other manufacturers. Foam generation and dispensing occur through flow and suction by the brass and stainless steel foam head. The MTM Hydro PF22.3 comes with a variety of adjustment options. You can adjust the spray pattern from round to flat, change the direction of the flat stream horizontally or vertically, and set the concentration of the water/chemical mixture. The MTM Hydro PF22.3 is designed as an improvement over the PF22.2, featuring a large filling opening. An upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro is available pre-assembled with various adapters and ready for use, or it can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we are happy to assist. Various Versions of the PF22.3 Foam Lance from MTM Hydro The MTM Hydro comes pre-assembled with various adapters and is ready for use or can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we are happy to assist. High-quality foam lance produced in Italy Patented foam generation technology Tip-resistant with a filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024 !!! Initially, MTM Hydro did not intend to produce the so-called Wide Mouth. The "inventor" of the PF22.2 was - as far as we know - the US importer, who developed a conversion kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (low pressure). At our urging to make this an official MTM Hydro product, our Italian friends then complied, resulting in the PF22.3 and the offered upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon for high pressure cleaners, made in Italy. The lance can be used with up to 200 bar and a water flow of 11.5 l/min. With a tank volume of 1,000 ml, the MTM PF22.3 holds more than most foam cannons from other manufacturers. Foam generation and discharge occur through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.3 offers a variety of adjustment options, allowing you to set the spray pattern from round to flat, the direction of the flat jet horizontally or vertically, and the concentration of the water/chemical mixture. The MTM Hydro PF22.3 is an advanced version of the PF22.2 with a wide filling opening. A suitable upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro comes ready to use with various pre-assembled adapters or can be adapted using a 1/4 inch screw thread. If you have questions about the correct adapter, we are happy to assist. Different Variants of the MTM Hydro PF22.3 Foam Lance The MTM Hydro comes ready to use with various pre-assembled adapters or can be adapted using a 1/4 inch screw thread. If you have questions about the correct adapter, we are happy to assist. High-quality foam lance from Italian production Patented technology for foam generation Tilt-proof with filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024 !!! Initially, MTM Hydro did not plan to produce the so-called Wide Mouth. The "inventor" of the PF22.2 was, as far as we know, the US importer, who developed a corresponding retrofit kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (low pressure). At our urging, the Italian friends came around to make this an official MTM Hydro product, resulting in the PF22.3 and the offered upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon for high-pressure cleaners, made in Italy. The lance can be used with up to 200 bar and a water flow of 11.5 l/min. With a tank volume of 1,000 ml, the MTM PF22.3 holds more than most foam cannons from other manufacturers. The foam generation and dispensing occur through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.3 features multiple adjustable settings. You can adjust the spray pattern from round to flat, the direction of the flat spray horizontally or vertically, and the concentration of the water/chemical mixture. The MTM Hydro PF22.3 is a development of the PF22.2, designed with a large filling opening. An upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro comes fully assembled with various adapters and is ready for use, or it can be adapted with a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. Different Versions of the PF22.3 Foam Lance from MTM Hydro The MTM Hydro is available fully assembled with various adapters and is ready to use or can be adapted with a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. High-quality foam lance from Italian production Patented technology for foam generation Tip-resistant with scale for filling Various adaptations for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024 !!! Initially, MTM Hydro did not intend to produce the so-called Wide Mouth variant. The "inventor" of the PF22.2 was - as far as we know - the US importer, who developed a corresponding retrofit kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (i.e., low pressure). At our urging to make this an official MTM Hydro product, our Italian friends eventually complied, leading to the creation of the PF22.3 and the offered upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon made in Italy for high-pressure cleaners. The lance can be used with up to 200 bar and a water flow rate of 11.5 l/min. With a capacity of 1,000 ml, the MTM PF22.3 container holds more than most foam cannons from other manufacturers. Foam generation and delivery occur via flow and suction through the brass and stainless steel foam head. The MTM Hydro PF22.3 offers a variety of adjustment options. The spray pattern can be adjusted from round to flat, the direction of the flat spray to horizontal or vertical, and the concentration of the water/chemical mixture can be set. The MTM Hydro PF22.3 is a further development of the PF22.2 with a large filling opening. A corresponding upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro is delivered pre-assembled with various adapters and ready for use or can be self-adapted via a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. Different Versions of the PF22.3 Foam Lance by MTM Hydro The MTM Hydro is delivered pre-assembled with various adapters and ready for use or can be self-adapted via a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. High-quality foam lance made in Italy Patented foam generation technology Tilt-proof with filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024!!! Originally, MTM Hydro did not intend to produce the so-called Wide Mouth. The "inventor" of the PF22.2 was - as far as we know - the US importer who developed a retrofit kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (low pressure). At our urging to make this an official MTM Hydro product, our Italian friends eventually complied, and the PF22.3 and the offered upgrade kit were created.

Exclusive at Chemical-Shark.de - Wide Mouth MTM Hydro PF22.3 Foam Cannon! The MTM Hydro PF22.3 is a professional foam cannon for high-pressure cleaners produced in Italy. It can be used with up to 200 bar and a water flow of 11.5 l/min. With a tank volume of 1,000 ml, the MTM PF22.3 holds more than most foam cannons from other manufacturers. Foam generation and dispensing occur through flow and suction via the brass and stainless steel foam head. The MTM Hydro PF22.3 features various adjustment options. You can adjust the spray nozzle from round to flat, set the direction of the flat spray horizontally or vertically, and control the concentration of the water/chemical mixture. The MTM Hydro PF22.3 is designed as an upgraded version of the PF22.2 with a larger filling opening. An upgrade kit for PF22 and PF22.2 owners is also available. The MTM Hydro comes ready to use with various adapters or can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. Different Versions of the PF22.3 Foam Lance from MTM Hydro The MTM Hydro is delivered ready to use with different adapters or can be adapted using a 1/4 screw thread. If you have questions about the right adapter, we are happy to help. High-quality foam lance produced in Italy Patented technology for foam generation Tip-proof with filling scale Various adaptations for Kränzle, Nilfisk, and Kärcher Wide Mouth Version 2024 !!! Originally, MTM Hydro did not intend to produce the so-called Wide Mouth. The "inventor" of the PF22.2 was - as far as we know - the US importer, who developed a corresponding upgrade kit for the PF22.2 foam cannon based on the new GHF1, a foam cannon for garden hoses (low pressure). At our insistence to make this an official MTM Hydro product, our Italian friends then came back and created the PF22.3 along with the offered upgrade kit.

Exclusive at Chemical-Shark.de - Wide Mouth Upgrade Kit for the MTM Hydro PF22.2 Foam Cannon! It's true that the introduction of the PF22.2 Foam Cannon took a long time here. As the sole provider, we dared to tackle this topic. The background of the effort was the complex compilation of corresponding adapter sets, as MTM Hydro does not offer its own Quick Connect adapters. After establishing a stable foundation in our collaboration with MTM Hydro over the past months, things have sped up a bit, and we can now welcome the Upgrade Kit for the PF22.3 with a wider opening - Wide Mouth - to our range. MTM Hydro PF22.3 Wide Mouth Upgrade Kit Upgrade kit consisting of an adapter piece and a bottle with a large opening Perfect for existing PF22.2 and PF22.1 users Original MTM Hydro - Made in Italy Initially, MTM Hydro did not intend to produce the so-called Wide Mouth. The "inventor" of the PF22.3 was - as far as we know - the US importer, who developed a retrofit kit for the PF22.2 Foam Cannon based on the new GHF1, a foam cannon for garden hoses (low pressure). After numerous requests to make this an official MTM Hydro product, our Italian friends eventually complied, leading to the PF22.3 and its Upgrade Kit.

Stainless steel wool for foam generation as a replacement insert for MTM Hydro PF22 foam wands. MTM Hydro original replacement part Compatible with MTM Hydro PF22 foam wands Made of stainless steel

The MTM PF22.2 Replacement Tank is designed as a spare part for the MTM Hydro PF22.2 foam lances, but it can also be used with existing MTM Hydro PF22 foam lances or other foam lances with the same thread. The highlight: The tank features a tilt-proof design, making it ideal for filling and storage. Original MTM Hydro spare part Compatible with MTM Hydro PF22 foam lances (1st generation), among others Tilt-proof construction with filling scale