DP Pro Hose Connector Kärcher Adapter to M22 x 1.5 14mm

DP Pro quick connect components are designed for the secure operation of pressure washers and are manufactured with utmost care. They can be used with MTM Hydro spray guns, cleaning wands, and foam lances, and are also suitable for adapting products from other manufacturers such as Kärcher, Nilfisk, and Kränzle. DP Pro 3/8in M22 M Quick Connect Brass Coupling 14mm Diameter for MTM Hydro 3/8 inch quick connect coupling to M22 thread Important: Diameter of 14mm e.g. for connecting 3/8 inch components to pressure washers Made of brass Suitable up to 200 bar

DP Pro Quick Connect components are designed for safe operation with pressure washers and are manufactured with the utmost care. They can be used with MTM Hydro spray guns, cleaning wands, and foam wands, but are also suitable for adapting products from other manufacturers such as Kärcher, Nilfisk, and Kränzle. DP Pro 3/8in M22 M Quick Connect Stainless Steel Coupling 14mm Diameter for MTM Hydro Quick connect coupling 3/8 inch to M22 thread Important: Diameter or inner diameter 14mm e.g. for connecting 3/8 inch components to pressure washers Made of stainless steel Suitable up to 200 bar

MTM Hydro Foam Kits for pressure washers are professional sets for car washing in both private and commercial use. These kits combine high-quality spray guns widely used in car washes and are adapted for the Quick Connect system by Detail Passion for 1/4 or 3/8 inch connections. The system is designed for pressure washers with a flow rate of approximately 8 to 12 liters per minute up to 200 bar. All connection adapters are made of high-quality stainless steel. Assembly can be done using PTFE sealing tape or Loxeal 53-14 thread sealant. Included in the MTM Hydro Pro Foam Kit MTM Hydro SG28 High Pressure Gun Swivel Inlet Wash Gun G3/8F to G1/4F MTM Hydro PF22.2 G1/4F Professional Foam Cannon 1000ml DP Pro 1/4in Quick Connect Male Nipple Stainless Steel for MTM Hydro DP Pro 1/4in Quick Connect Male Coupling Stainless Steel for MTM Hydro DP Pro 3/8in Quick Connect Male Nipple Stainless Steel for MTM Hydro DP Pro 1/4in Nozzle Quick Connect 40 Degree White for MTM Hydro Possible Washing Methods with the MTM Hydro Foam Kit This set includes the leading foam cannon PF22.2, which can be mounted to the pressure gun using the 1/4 Quick Connect system. Pre-cleaners, shampoos for the subsequent hand wash, and sealant foams can be applied with the PF22.2 foam cannon and processed either with a microfiber wash pad or wash glove. The PF22.2 features an adjustable foam head that can be continually modified for concentration levels. This allows for perfect foam creation tailored to your needs. The set also includes a 40-degree nozzle suited for rinsing and final cleaning. With a generous spray angle of 40 degrees, intense yet safe application during vehicle cleaning is achievable. Due to the compact size and close spray angle to the vehicle, minimal water consumption and quick washing are possible. The pressure gun is equipped with a swivel end piece, ensuring maximum movement freedom and working comfort. Adaptation to Pressure Washers from Kärcher, Nilfisk, Kränzle and others Most professional pressure washers come with M22 thread fittings on the hoses. These can be supplemented with 3/8 quick couplings or adapted to the pressure gun using connections. We offer corresponding adapters and are happy to assist in choosing the right combination.

MTM Hydro Foam Kits for pressure washers are professional sets for car washing in both private and commercial use. The MTM Hydro Foam Kits combine high-quality spray guns used worldwide in car wash facilities with adaptations for the Quick Connect system by Detail Passion for 1/4 or 3/8 inch. The system is designed for pressure washers with a flow rate of approximately 8 to 12 liters per minute up to 200 bar. All connection adapters are made from high-quality stainless steel. Assembly can be done using PTFE sealing tape or Loxeal 53-14 thread sealant. What's Included in the MTM Hydro Ultra Foam Kit MTM Hydro SGS35 Pressure Gun Swivel Inlet Wash Gun G3/8F to G1/4F MTM Hydro PF22.2 G1/4F Professional Foam Canon 1000ml DP Pro 1/4in Quick Connect M Stainless Steel Nipple for MTM Hydro DP Pro 1/4in Quick Connect M Stainless Steel Coupling for MTM Hydro DP Pro 3/8in Quick Connect M Stainless Steel Nipple for MTM Hydro DP Pro 1/4in Nozzle Quick Connect 40 Degree White for MTM Hydro Washing Methods with the MTM Hydro Foam Kit This kit includes the leading PF22.2 foam cannon, which can be attached to the pressure gun using the 1/4 Quick Connect system. Pre-cleaners, shampoos for subsequent hand washing, and sealant foams can be applied with the PF22.2 foam cannon and can be processed with a microfiber wash pad or wash mitt as desired. The PF22.2 features a variable foam head that can be adjusted in concentration continuously. This allows for perfect foam consistency tailored to your needs. The kit also includes a 40-degree nozzle for the 1/4 Quick Connect, suitable for rinsing and final cleaning. With a generous spray angle of 40 degrees, intense yet safe application during vehicle cleaning is possible. The compact overall size and spray angle keep the distance to the vehicle very short, ensuring minimal water usage and quick washing. The pressure gun is equipped with a swivel end for maximum maneuverability and working comfort. Adapter for Pressure Washers from Kärcher, Nilfisk, Kränzle, and Others Most professional pressure washers come with M22 threaded connections on the hose. These can either be supplemented with 3/8 quick couplings or adapted to the pressure gun via threading. We offer corresponding adapters and are happy to assist with choosing the right combination.